I have a Vista Home Premium laptop and a Windows 7 upgrade disk. I want to clean install 7, but I want to keep hold of my files (I know I'll lose my programs). My laptop came with two partitions on the hard drive, C for the OS and D which I've used for files and backup. My question is this: can I clean install Windows 7 onto C without losing all the files that are on D?
View 4 RepliesI have a drive with 2 partitions 450GB each and a 100GB partition which I use for files shared on a SVN. Currently I am using windows 7 home premium but I just got Ultimate from a friend who gave it to me as a gift. Can I install ultimate on one of the partitions and leave the rest untouched? I have important files like documents/spreadsheets for work and family photos on my primary hard drive that currently has home premium, I use the other partition for easy organization of all my games. So my question is that is there a way for me to install ultimate on that second 450GB partition and then delete windows boot files and everything from the other one to make ultimate the only bootable partition? If not then are there any cheap external drives, preferably eSATA, that I can use because I am on a budget?
View 4 Replies View RelatedI will try my best to describe my issue without making it very complicating.1. My computer had 3 partitions - A, B and C.C: is where the Windows 8 was installled B: is where I tried to install another windows for testing purposes - Windows 7 Professional In the installation process my computer restarted and gave me an error - Bootmgr compressed. To resolve this error, I tried infinite times to get into my computer via BIOS, Bootable various USBs - Pirated Windows, Original Windows etc etc etc! (I don't have a DVD/CD drive in this computer).After many attempts trying to get into my PC I simply couldn't because of via the bootable USB - Windows 7 Professional, It keeps on getting stuck at the page "Drivers Missing for Installation" - So, I clicked on the "Repair my Computer" and went to Command prompt. Is there anyway I can get all the partitions showing again and do you think I have eased all the data?
View 9 Replies View RelatedI have installed Windows 7 next to my old Windows XP (so it's a dualboot situation). I have 2 physical HDD's (320 GB each) and 6 logical drives (2 + 4 primary partitions, all NTFS). After installing Windows 7, two of 4 partitions in one hdd have become inaccessible - disk manager still shows them, but I can't neither set a drive letter, nor view properties. I get the following error:
"The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by usin the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart computer."
Both of the inaccessible partitions are fine in Windows XP. Any ideas or solutions ? ;/
I have just deleted all partitions on my laptop hard drive to install windows 7 and messed something up...I know cannot install windows 7 as it just sticks at the setup is starting screen..can I put the drive in my pc (running xp) and save it somehow ? I have nothing on the laptop to repair or anything as far as I can see ...
View 12 Replies View RelatedI have installed Windows 7 next to my old Windows XP (so it's a dualboot situation). I have 2 physical HDD's (320 GB each) and 6 logical drives (2 + 4 primary partitions, all NTFS). After installing Windows 7, two of 4 partitions in one hdd have become inaccessible - disk manager still shows them, but I can't neither set a drive letter, nor view properties. I get the following error:
"The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by usin the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart computer."
Both of the inaccessible partitions are fine in Windows XP. Any ideas or solutions ?
I have a Asus Eee Pc 1005ha that i want to install windows 7 on. I'm running xp with a single hdd (149.05gb total) that has 4 partitions set up like this. C: 72.06gb NFTS (system), D: 72.05gb NFTS, PE: 4.89gb FAT32 (unknown partition), No Volume: 47mb unknown type (EFI system partition) this partition displays diagonal lines in disk management. I want to remove these so I only have one C: drive (149gb) where win 7 will be installed. How would I go about removing these during the install procedure? Should i just delete the no volume, PE and D: drive? Or should I delete all 4 partitions? Little confused on this rather ask before I do something wrong. From what I read the 47mb partition is the asus boot booster which speeds up boot time which I don't think I need with win 7.
View 9 Replies View RelatedI have a 500 GB Hard Disk.I want to make 9 partitions of various sizes & Install Windows 7 64 bit ( Ultimate ) in the first partition.I installed this Hard Disk as slave to my current Hard Disk & tried using disk management but it makes all partitions as Primary & doesn't give me a choice to create an extented partition within which I can make 8 Logical partitions.
I have very limited knowledge of Hardware.Also do I need to make any partition active & if yes how & what does active do ?
I have a little problem.I have windows XP and I wanted to install Windows 7.All went well till the part where I deleted the existing partitions and created new ones.The problem is after this step the installation failed and an error message appeared :,,Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation.
View 1 Replies View RelatedI recently installed a fresh copy of Windows on my SSD. During setup I opted to delete all my old partitions on the drive, however I did not format the drive. Will this decision have an impact on the performance of the drive? Should I have reformatted the unallocated space on the drive to get better performance?
View 4 Replies View RelatedDamn Windows Update started installing a video card driver. My system is a Dell Vostro 430 and has an ATI HD 4350 (I think), but however, for some stupid reason it can only work with Dell's video driver. So when Windows Update installed the official driver for me, by the time I realised what it was doing it was too late. My screens went black; an incompatible driver screwed everything up.
Worse yet, it was still installing updates, so I was scared to turn my computer off in case it would create major problems. After waiting for four hours I decided it was time to pull the plug. After restarting the computer, it kept rebooting when it started loading Windows 7, and then soon after it didn't even get that far; it told me there was no compatible SATA device found and it refused to boot full stop. Trust this to happen at assignment hand-in week. I've got so much work to do.
I went to the library and downloaded an Ubuntu ISO and burned it to disc. I also got a legit ISO (I'm a student and use MSDN) of Windows 7 x86, since Windows 7 x64 had its problems with the software I use for my course. First of all I backed up all of my uni work using Ubuntu as a live CD, which worked okay. I moved other important data from my Windows (main) partition to my other partitions (Music, Games, TV/Films, etc) since I knew I was going to be formatting my system partition for a reinstallation.
I have two HDs installed. A 500GB one and a 1.5TB one. The drives seem to still be working since I could access them in Ubuntu. However, most of the partitions were formatted as dynamic partitions, not basic. It seemed that the partitions on my 500GB drive were basic, whereas the ones on my 1.5TB were dynamic. This is why it disallowed me to install Windows 7 on the 1.5TB drive. (It dislikes dynamic partitions for whatever reason.) However, I formatted the original basic system partition and started installing Windows 7 x86 on it. It got to 100% and was finalising installation, until it halted, told me the installation had failed, and that I'd need to restart and try again. Every time I have tried, it has failed at that point.
I don't know what the heck to do. I can't remove the partitions that exist because they contain a lot of data that I really want. I also have no means of backing up the data. I have no DVD discs left (and it would take a damn lot to back up hundreds of gigs), and no external HDs. Just for the sake of trying it out, I tried installing 7 x64 and got the same error, so I don't think it's x86-specific.
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies View Relatedtell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
View 5 Replies View RelatedI'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies View RelatedIs it possible to move my Windows 7 installation from the partition (both the Sys. Reserved & OS partitions) of one drive on one controller to the partition of another drive on a different controller, AND have it boot? I know "something" would have to altered, but I'm not sure "what" or "how". Is this even possible without going through a lot of hoops. Specifically I have an installation of W7x64 installed on the 1st partition of the master drive on a PATA controller. I want to move it to the 1st partition of the master drive on my SATA controller.
FROM PATA0 {sys reserved}{OS install}{data}
TO SATA0 {sys reserved}{OS install}{data}
I also have another install on the 2nd partition of my SATA4 controller and want to move it to the 1st partition of my SATA0 controller
FROM SATA4 {data}{sys reserved}{OS install}
TO SATA0 {sys reserved}{OS install}{data}
I cant installing windows 7 or 8 on any partition (D, E, F, G) except C partition, so I try to delete them and create a new partition but I cant also (delete and new icon are disable).
View 2 Replies View RelatedI'm trying to install Windows 7 x64 on a machine that currently has the Windows 7 RC on it. When I boot from the DVD, it immediately goes into "Windows is loading files...", which it does for 30 minutes or so and then reboots, at which point I get a message that says that Windows cannot start because files have changed.
Normally when I boot from the DVD, the first thing it asks me is whether I want to create/delete partitions, do a fresh install or an upgrade, etc. I'm not getting any of that. Anyone know what's wrong?
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies View RelatedOne of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs
Partition 2: home partition for himself
Partition 3: home partition for his mother
Partition 4: home partition for his sister
Partition 5: home partition for his other sister
Partition 6: shared partition for some photos.
I have a PC with 2 hard drives- the first hard drive has a single partition and windows 7 64-bit is installed on this hard disk.Now I wish to install CentOS 6 on the first partition of the second hard disk.I have created the dvd for installing Cent OS also.How do I configure the boot loader in Windows? If I install Linux on second hard disk, will this overwrite the Windows Boot Loader? How do I create a dual boot system so that the windows boot loader correctly shows linux as an option, so that I am able to load either Windows 7 (existing) or Linux(on second hard disk- not yet installed)
View 2 Replies View RelatedI originally did the upgrade install of Windows 7 from Vista to Windows 7. I am seeing that I now am running "ChkDsc" every time that my computer is shut down. I was told that I would be better off to do a clean install and reinstall programs and files. Can I do a clean install with my upgrade disc, or will I be creating additional problems ?
View 5 Replies View RelatedI'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
I'm finding this decision quite hard to decide on and can't decide what to do. I am very picky about wasted space or unnecessary stuff on my hard drive, yet I'd rather not install everything all over again which will take about 20 hours or so.
My question is...if I do an upgrade-install, can I just delete everything in the Windows.old folder and have everything practically the same as a clean install? Or will there be still be some left over things from the hundreds of programs I've installed and uninstalled?
Edit: I've ran the Windows 7 Upgrade Advisor and everything seems ok.
My 2 year old laptop is starting to get sluggish so I'm wondering if I should try to do a clean install of my Home Premium Windows. Problem is, the computer came with no disks. Also, I'm assuming that the Backup and Restore function that's built in would only give me a copy of my crap-filled hard drive contents if I "made" the backup (to an external disk, presumably) then "restored" it to my freshly formatted internal drive. right? So, can I make my OWN clean disks with some utility on the machine? Or do I have to BUY another copy of Windows 7 Home Premium? Or will Best Buy provide me with one if I take my machine in? Or will Lenovo provide one?
View 3 Replies View RelatedI'm about to buy the Windows 7 Professional Upgrade version. Is it possible to do a clean install from it? (I have a preinstalled Windows 7 Home Premium on my pc). If not, what is the preferred product to do this?
View 9 Replies View RelatedI am currently running build 7600 of Windows 7, I did a clean install without formatting the drive over windows vista premium 64bit and then removed the windows.old folder via the directions found on this board. My question is, that when I download my copy of Windows 7 off of digitalriver (I'm a college student) what is it I need to do in order to have a clean install? I've heard numerous reports that say I wouldn't have to install anything because build 7600 is the final version, and all I would need to do is enter the product key given on my upgrade version.
View 9 Replies View RelatedI've purchased and downloaded the UPGRADE 64-bit version of Windows 7. I have a blank HDD waiting to go into my machine. Am i able to just do a clean install of this straight onto the new HDD, or do i need the full retail version of this?
I'm currently using XP Pro 32-bit on my existing HDD, hence getting a new one in preparation.
i purchased a crucial m4 256gb ssd coming in Wednesday anyways i was wondering how can i make a clean install of windows 7 64 bit on the SSD, i have my HDD backed up but unfortunately i lost my window's 7 cd... what can i do? is there a program i could use to transfer from my HDD to SSD, but with clean install? i have 480gb used on my HDD...
View 2 Replies View RelatedIs there anyway (at all) that I can convert my version of windows 32bit and all my software to 64 bit without doing a clean install?
View 3 Replies View Relatedi've had enough of 7, I use my PC for music and after months of installing/uninstalling/re installing/researching/driver checking etc. i've decided i'm just not going to get things working with 7.
I have my XP disc and i'm ready to do a clean install, but i'm struggling to get it going... what do I do!? Inserting the XP disc brings up the autopay but the option to install is greyed out, which I understand as it's a step down. However, when I press f12 on booting to try to boot my pc from disc it just locks on the boot menu. What can I do to get a clean install of XP going?