I have installed Windows 7 next to my old Windows XP (so it's a dualboot situation). I have 2 physical HDD's (320 GB each) and 6 logical drives (2 + 4 primary partitions, all NTFS). After installing Windows 7, two of 4 partitions in one hdd have become inaccessible - disk manager still shows them, but I can't neither set a drive letter, nor view properties. I get the following error:
"The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by usin the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart computer."
Both of the inaccessible partitions are fine in Windows XP. Any ideas or solutions ?
I'm running windows 7 ultimate and have had no problems until a few days ago when the os stopped me installing software. The error message is 'These files can't be opened' 'Your internet security settings prevented one or more files from being opened'. I've restored the computer to a previous date without success. I've run a virus scan which found 2 Trojans and a malicious software. These have been removed. The main problem - apart from not being able to install any programs is that I cannot change the internet properties as some items appear barred. I really don't want to format the hard drive and start again.
I have just deleted all partitions on my laptop hard drive to install windows 7 and messed something up...I know cannot install windows 7 as it just sticks at the setup is starting screen..can I put the drive in my pc (running xp) and save it somehow ? I have nothing on the laptop to repair or anything as far as I can see ...
I have a Asus Eee Pc 1005ha that i want to install windows 7 on. I'm running xp with a single hdd (149.05gb total) that has 4 partitions set up like this. C: 72.06gb NFTS (system), D: 72.05gb NFTS, PE: 4.89gb FAT32 (unknown partition), No Volume: 47mb unknown type (EFI system partition) this partition displays diagonal lines in disk management. I want to remove these so I only have one C: drive (149gb) where win 7 will be installed. How would I go about removing these during the install procedure? Should i just delete the no volume, PE and D: drive? Or should I delete all 4 partitions? Little confused on this rather ask before I do something wrong. From what I read the 47mb partition is the asus boot booster which speeds up boot time which I don't think I need with win 7.
I have a 500 GB Hard Disk.I want to make 9 partitions of various sizes & Install Windows 7 64 bit ( Ultimate ) in the first partition.I installed this Hard Disk as slave to my current Hard Disk & tried using disk management but it makes all partitions as Primary & doesn't give me a choice to create an extented partition within which I can make 8 Logical partitions.
I have very limited knowledge of Hardware.Also do I need to make any partition active & if yes how & what does active do ?
I have a little problem.I have windows XP and I wanted to install Windows 7.All went well till the part where I deleted the existing partitions and created new ones.The problem is after this step the installation failed and an error message appeared :,,Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation.
Damn Windows Update started installing a video card driver. My system is a Dell Vostro 430 and has an ATI HD 4350 (I think), but however, for some stupid reason it can only work with Dell's video driver. So when Windows Update installed the official driver for me, by the time I realised what it was doing it was too late. My screens went black; an incompatible driver screwed everything up.
Worse yet, it was still installing updates, so I was scared to turn my computer off in case it would create major problems. After waiting for four hours I decided it was time to pull the plug. After restarting the computer, it kept rebooting when it started loading Windows 7, and then soon after it didn't even get that far; it told me there was no compatible SATA device found and it refused to boot full stop. Trust this to happen at assignment hand-in week. I've got so much work to do.
I went to the library and downloaded an Ubuntu ISO and burned it to disc. I also got a legit ISO (I'm a student and use MSDN) of Windows 7 x86, since Windows 7 x64 had its problems with the software I use for my course. First of all I backed up all of my uni work using Ubuntu as a live CD, which worked okay. I moved other important data from my Windows (main) partition to my other partitions (Music, Games, TV/Films, etc) since I knew I was going to be formatting my system partition for a reinstallation.
I have two HDs installed. A 500GB one and a 1.5TB one. The drives seem to still be working since I could access them in Ubuntu. However, most of the partitions were formatted as dynamic partitions, not basic. It seemed that the partitions on my 500GB drive were basic, whereas the ones on my 1.5TB were dynamic. This is why it disallowed me to install Windows 7 on the 1.5TB drive. (It dislikes dynamic partitions for whatever reason.) However, I formatted the original basic system partition and started installing Windows 7 x86 on it. It got to 100% and was finalising installation, until it halted, told me the installation had failed, and that I'd need to restart and try again. Every time I have tried, it has failed at that point.
I don't know what the heck to do. I can't remove the partitions that exist because they contain a lot of data that I really want. I also have no means of backing up the data. I have no DVD discs left (and it would take a damn lot to back up hundreds of gigs), and no external HDs. Just for the sake of trying it out, I tried installing 7 x64 and got the same error, so I don't think it's x86-specific.
Is it possible to move my Windows 7 installation from the partition (both the Sys. Reserved & OS partitions) of one drive on one controller to the partition of another drive on a different controller, AND have it boot? I know "something" would have to altered, but I'm not sure "what" or "how". Is this even possible without going through a lot of hoops. Specifically I have an installation of W7x64 installed on the 1st partition of the master drive on a PATA controller. I want to move it to the 1st partition of the master drive on my SATA controller.
FROM PATA0 {sys reserved}{OS install}{data} TO SATA0 {sys reserved}{OS install}{data}
I also have another install on the 2nd partition of my SATA4 controller and want to move it to the 1st partition of my SATA0 controller
FROM SATA4 {data}{sys reserved}{OS install} TO SATA0 {sys reserved}{OS install}{data}
I cant installing windows 7 or 8 on any partition (D, E, F, G) except C partition, so I try to delete them and create a new partition but I cant also (delete and new icon are disable).
I have a PC with 2 hard drives- the first hard drive has a single partition and windows 7 64-bit is installed on this hard disk.Now I wish to install CentOS 6 on the first partition of the second hard disk.I have created the dvd for installing Cent OS also.How do I configure the boot loader in Windows? If I install Linux on second hard disk, will this overwrite the Windows Boot Loader? How do I create a dual boot system so that the windows boot loader correctly shows linux as an option, so that I am able to load either Windows 7 (existing) or Linux(on second hard disk- not yet installed)
I have a Vista Home Premium laptop and a Windows 7 upgrade disk. I want to clean install 7, but I want to keep hold of my files (I know I'll lose my programs). My laptop came with two partitions on the hard drive, C for the OS and D which I've used for files and backup. My question is this: can I clean install Windows 7 onto C without losing all the files that are on D?
I have installed Windows 7 next to my old Windows XP (so it's a dualboot situation). I have 2 physical HDD's (320 GB each) and 6 logical drives (2 + 4 primary partitions, all NTFS). After installing Windows 7, two of 4 partitions in one hdd have become inaccessible - disk manager still shows them, but I can't neither set a drive letter, nor view properties. I get the following error:
"The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by usin the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart computer."
Both of the inaccessible partitions are fine in Windows XP. Any ideas or solutions ? ;/
I have a drive with 2 partitions 450GB each and a 100GB partition which I use for files shared on a SVN. Currently I am using windows 7 home premium but I just got Ultimate from a friend who gave it to me as a gift. Can I install ultimate on one of the partitions and leave the rest untouched? I have important files like documents/spreadsheets for work and family photos on my primary hard drive that currently has home premium, I use the other partition for easy organization of all my games. So my question is that is there a way for me to install ultimate on that second 450GB partition and then delete windows boot files and everything from the other one to make ultimate the only bootable partition? If not then are there any cheap external drives, preferably eSATA, that I can use because I am on a budget?
I recently installed a fresh copy of Windows on my SSD. During setup I opted to delete all my old partitions on the drive, however I did not format the drive. Will this decision have an impact on the performance of the drive? Should I have reformatted the unallocated space on the drive to get better performance?
I'm trying to install Windows 7 x64 on a machine that currently has the Windows 7 RC on it. When I boot from the DVD, it immediately goes into "Windows is loading files...", which it does for 30 minutes or so and then reboots, at which point I get a message that says that Windows cannot start because files have changed.
Normally when I boot from the DVD, the first thing it asks me is whether I want to create/delete partitions, do a fresh install or an upgrade, etc. I'm not getting any of that. Anyone know what's wrong?
One of my friends has a windows 7 computer with an account for himself, his mother and his 2 sisters. All the home directorys are stored in drive C. Partition D is shared. The question is, how to get a partition layout like this?
Partition 1: OS + programs Partition 2: home partition for himself Partition 3: home partition for his mother Partition 4: home partition for his sister Partition 5: home partition for his other sister Partition 6: shared partition for some photos.
I recently received a hp mini 110-3015dx, it was slow and constantly freezing, ergo I did a factory restore, everything is great now accept I can't access my c: drive. when I double click I get the message; c: is not accessible, access denied. What must I do to change this setting? Windows 7 starter.
This morning when I went to run on my windows 7 32-bit installed PC, I was greeted by an error message saying "The boot selection failed because a required device is inaccessible". This is odd because last night it was working perfectly, with no problems. I've tried several solutions, like using the repair CD 3 times, to no avail, as well as writing a new mbr through Linux, using testdisk. I also know the whole hard disk isn't compromised since my Linux dual boot is still working with no problems from its partition.
I have a pc that has been running windows 7 pro fine for a couple of years. Today it wont boot stopping with the message: "Windows failed to start.A recent hardware or software change might be the cause."
To fix the problem: 1.Insert windows installation disc and restart your computer 2.Choose your language settings and then click "next" 3.Click "repair your computer".
If you do not have this disc contact your system administrator or computer manufacturer for assistance. Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible.
This machine has only one dvd drive and one hdd. I have checked the boot list in the bios settings and the cd drive is first then the hdd second. If I insert the windows 7 cd and press any key to boot from cd when prompted I still end up at the "windows failed to start " screen. At this point I have the option to select "Launch startup repair" or "start windows normally" but I cant select them, the machine just counts down and continues to try to launch startup repair and fails with the 0xc000000e error.
I am not able to run recovery on by laptop. When I try to run recovery from hard drive or even booting system from DVD ROM using recovery discs I get the following error:
Status: 0xc0000225 Info: The boot selection failed because a required device is inaccessible.
My system is HP pavilion dv6 2150us. My hard drive is dynamic (someone told me that this error is because of dynamic hard drive). Will I have to convert dynamic hard drive to basic to run recovery? Or is there another way around?
I had creat an briefcase 2 month ago putting some of my imp. files. now when i try to open it it says "This Briefcase cannot be opened because the disk is inaccessible." Verify that the disk is accessible.
I've got a WD 1TB NTFS harddisk When i turn on suddenly it became inaccessible The before i turn off my PC it's still ok and also i can still copy the content to another HDD And the problem comes when i turn it on Before it i delete some unknown files that just keep coming Got "MS***.tmp" files, not just one but in multiples and before this I always delete it and it still ok But now it became inaccessible?
I have a bigger problem now... I had a lot of restarts since a unknown problem appeared (what makes my windows freeze + restart all the time). Beacuse I restart my computer each day when he freezes, i have now problems like files and folders being corrupted and inaccessible. Can't access a folder or open program. It even says that some .exe program is corrupted or web browser too... but i can open 99% of them only not 1 or 2. I think that reinstalling my win is the only way out of these many problems i have now beacuse restarting my computer each day by 2-3 times isn't a solution.
how i can solve this problem? when i opened this Briefcase it show me this warning ((this briefcase can not be opened because the disk is inaccessible verify that the disk us accessible))
Previous language settings default English United States. Selected and installed Greek, Spanish latin Am erica, French Canada and Russian. Click EN icon on desk top taskbar and all language icons displayed and selectable. OPne day the EN icon disappeared and languages had to be reselected. English default still works but EN icon not present when no other languages available. I went to keyboard change in control panel and reselected all the languages previously accessible. However, the icons will not appear on the desktop taskbar and the languages while displayed in the control panel, those icons can not be used to gain access to the languages they represent.
The file itself became inaccessible in windows explorer and i cant delete it. trying to open the folder it is in just times out (the progress bar in the file path just keeps going and going).The other files in the same folder work fine.
I encrypted my 4GB brand new Flash Drive with Bitlocker to Go in Windows 7 Enterprise (RC), ejected it, restarted my Windows 7 PC, and everything still worked. I tried opening it in XP and it was read-only and required my password to even look at it. That was expected. What I didn't expect, after ejecting it from the XP machine, was that it would be:
INACCESSIBLE, UNREADABLE, and IMPOSSIBLE to FORMAT after that!
No matter what PC I put it in now, I get a message saying that I must format the drive and nothing else. The drive is worthless. I when I right click in Windows 7, there is no BitLocker option. Before I throw it away, does someone know how to FIX THIS?
Ok, another Network problem I'm having is that the 9 shares that I have on my Windows 7 machine are shared among a small network with a couple of Vista machines, 1 Windows 7 machine and a couple of XP machines and even one Mac. Every once in a while when users on the XP machines try to use the shares, they are prompted with a username and password, and no matter what is entered they are not allowed access, even a good account and password on the Windows 7 machine.
They are told that the shares cannot be found, however they can still ping the Windows 7 machine, and they previously used the shares for days without problems. A reboot of the XP machine has no effect, however rebooting my Windows 7 (then manually readding the shares) clears it up. Again, WHY
Since xp the same ol' same ol'. Why after trouble shooting and getting access to my network folders does windows ALWAYS revert back to inaccessibility? You get it working for a short time and then it goes back to not being able to transfer simple files. This has been driving me nuts for years.
Two os's Windows 7 64 to and from 32bit could transfer files for about a week.
A program I use (neuro programmer) used to work quite well on my system but now when ever I try to load it, I get this error:[CODE]This obviously is related to me having sandboxie installed on my computer and then removing it incorrectly. I tried re-installing sandboxie and neuro programmer numerous times.I have tried to locate the folder but it doesn't exist on my systemI have run a registry cleaner (which I now know isn't the best) run several different spy/ad/malware scanners with nothing coming up.I haven't tested all my programs, but I am sure this could be a problem for a few of them.Is there anyway I can get this program to start? Is it a registry error? I looked in regedit and couldn't see anything really linked to neuro programmer (not that I am really aware of what to look for
