Deleting Partitions VS. Formatting During Fresh Install?

Nov 7, 2012

I recently installed a fresh copy of Windows on my SSD. During setup I opted to delete all my old partitions on the drive, however I did not format the drive. Will this decision have an impact on the performance of the drive? Should I have reformatted the unallocated space on the drive to get better performance?

View 4 Replies


ADVERTISEMENT

Deleting Partitions During Windows 7 Install?

Apr 11, 2012

I have a Asus Eee Pc 1005ha that i want to install windows 7 on. I'm running xp with a single hdd (149.05gb total) that has 4 partitions set up like this. C: 72.06gb NFTS (system), D: 72.05gb NFTS, PE: 4.89gb FAT32 (unknown partition), No Volume: 47mb unknown type (EFI system partition) this partition displays diagonal lines in disk management. I want to remove these so I only have one C: drive (149gb) where win 7 will be installed. How would I go about removing these during the install procedure? Should i just delete the no volume, PE and D: drive? Or should I delete all 4 partitions? Little confused on this rather ask before I do something wrong. From what I read the 47mb partition is the asus boot booster which speeds up boot time which I don't think I need with win 7.

View 9 Replies View Related

Doesn't Prompt To Delete Partitions, Do Fresh Install

Dec 29, 2009

I'm trying to install Windows 7 x64 on a machine that currently has the Windows 7 RC on it. When I boot from the DVD, it immediately goes into "Windows is loading files...", which it does for 30 minutes or so and then reboots, at which point I get a message that says that Windows cannot start because files have changed.

Normally when I boot from the DVD, the first thing it asks me is whether I want to create/delete partitions, do a fresh install or an upgrade, etc. I'm not getting any of that. Anyone know what's wrong?

View 2 Replies View Related

Deleting OS Without Formatting?

Jan 26, 2012

Okay, I want to do a fresh install of Windows 7 onto an SSD, then use my HDD which currently has Windows 7 on it for extra storage. However, I don't want to be prompted about which drive to boot from, nor do I want useless OS files on my spare drive.I don't have another drive to backup files to, so backing up then formatting isn't an option. What can I do to delete the OS files entirely and structure the drive like you would a typical backup drive?

View 4 Replies View Related

Deleting Old Partitions?

Apr 13, 2011

In error from a brand new hard drive (and build), I installed the 32-bit version of windows 7 onto my SSD. Upon the product key screen was when I noticed the issue. I input my product key, got windows loaded and then booted from the 64-bit CD instead.Here I chose the custom install feature and went to overwrite my old partition from the 32-bit version but it would not let me. I tried deleting it as well and I could not. I've since loaded 64-bit windows but I do notice that approximately 8Gb is down on my SSD.So at this point, I think I may have 2 options but I'm not sure how to go about either:1) Format the SSD completely so it is in a state like it came out of the box.2) Delete the old partition and gain 8Gb of space on the SSD while using 64-bit windows.

View 2 Replies View Related

Formatting Hard Drive Without Deleting Windows 7?

Feb 20, 2012

Is there a way of formatting a drive without deleting windows? I am trying to install windows 7 with a legitimate key on a hard drive, however I do not have a CD. Is there any way of installing windows 7 without a cd?

View 6 Replies View Related

Formatting All Partitions And Reinstalling Windows

Aug 18, 2011

due to some personal issues i need to completely reformat the whole HD.. and for some reason when i try to do it it only lets me format windows partition and i want EVERYTHING to be gone.

View 7 Replies View Related

Deleting Ubuntu Linux Partitions

Dec 12, 2009

I currently partitioned my drive so I can have a dual boot of Windows 7. How would I go about deleting the Ubuntu partitions, so I have just Windows 7? I don't want to just delete the partitions because the computer boots off of GRUB. Can you guys help me out?

View 9 Replies View Related

Deleting Partitions, Format The Whole Drive

Jul 3, 2009

Ok, I have my WD 160GB Vraptor partition and dual booting Vista & Win 7 ultimate x64. Disk 0

My 750GB Samsung used to be my old XP + Vista dual booting and it is partitioned as such. Disk 1

I have finished transfering all the pertinent data to my USB WD 320Gb Passport so now I want to format the whole drive and leave it as Back-Up for Data, Videos & Music + the ocassional game that doesn't fit on my Primary drive.

Here's the kicker, I am new to Vista & 7, if I remember correctly, in XP I used to go to Disk managment, select the disk and tell it to format it and it was done (I never did this often so I could be confused).

At any rate, the choices I get with Win 7 are:

If I right click on Disk 1, my only choices are, Convert to Dynamic Disk or Offline Right clicking on either of the other Disk 1 partitions gives me more choices. Format, Shrink or Delete volume My issue is that I do not want to have 2 more partitions but a full drive. I am sure that one of those options is the one I may need but I just don't know which one to choose and I really hate to work twice (if not more) to get to where I want to go.

any help tips or directions you guy may want to throw my way?

P.S.: I think I am over thiking this and as soon as I delete the volume, the partitions will go away and I am going to end where I want but I just like to be sure.

View 4 Replies View Related

Windows 7 / Creating A System Image: Formatting All Partitions?

Jun 30, 2012

I have 3 identical PCs with 2 partitions: C and D.I created a system image for one PC, C only.But when I restore that system image into the other 2 PCs (using Wind7 DVD), it formats both C and D and restore.The problem is that I have data on D and I don't want it to be formatted. I only want to restore the C image.

View 9 Replies View Related

Just Install New Windows Without Formatting?

Jan 29, 2013

I just puchased Windows 7 Home premium SP1 32 bit Full Version OEM to replace Vista Home Premium currently on my computer, which has given me all types of problems. I want to remove completly (format the disk), but cannot do it. Is there a way, or can I just install my new windows without formating? Will new drivers be installed doing it that way?

View 1 Replies View Related

How To Install Windows 7 Without Formatting The Partition

Nov 15, 2012

I have a Sony Vaio with two partitions, a main one that 412 GB and another one that is 39GB. The operating system is on the main partition (412GB) but I have been having a lot of problems with it so I want to install a new Windows 7 Home Premium version.

The problem is that I do not have an external hard disk drive and cannot afford one right now. I have the Windows 7 DVD that came with the computer (Home Premium 64-bit) and I also created a USB drive off of it, and will probably be using the USB since it's much faster and smoother.

Anyway, my question is how do i install Windows 7 to the main partition (400GB one) without having to format it? I am aware that I can probably install a new version of Windows in the same partition and then the old Windows will be moved to a folder called Windows (old) but in the past I have struggled with deleting that folder and it created more problems than anything

View 2 Replies View Related

Possible To Install Windows Xp On 7 Inbuilt By Formatting

Dec 21, 2011

Is it possible to install winXp on win7 inbuilt laptop, by formatting?

View 3 Replies View Related

Importing Windows 7 Install To A Fresh Install?

Aug 30, 2010

I plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.

View 5 Replies View Related

How To Install Windows 7 After Formatting Hard Drive

Jan 10, 2013

I had Genuine windows 7. But while trying to partition my C drive error occurred and i had to completely format my hard disk. Now how can I re install my windows 7 or regain it back as before??

View 4 Replies View Related

Windows 7 Clean Install Upgrade Disc Formatting

Oct 27, 2010

I have a laptop which has been giving me a hard time lately, and I need to reinstall windows 7 (for the 4th time in 1.2 years). I have never reformatted it before and all I have is the windows 7 upgrade disk that came with it (I got it back in September when all of those free upgrade deals were going on, it originally had vista.) I read that you can have activation issues after formatting the hard drive while installing using the upgrade disc. I think Microsoft let you do it if your email them to activate it, but I'm not sure and I don't know where you would do this. Since I don't feel like formatting it, installing vista, and then reinstalling 7.

View 7 Replies View Related

Can't Install Windows 7 After Formatting A Linux Based Server

Nov 13, 2011

Linux was installed on a server; Client required Windows 7; I uses USB key (always works) to install Windows 7. Formatted it but on reboot PC hung on the word 'Grub".

View 3 Replies View Related

Install Windows 7 Without Deleting Programs And Files?

Jan 5, 2013

I am currently Dual Booting Windows Vista and Ubuntu 12.04 on an Acer machine. I would like to install Windows 7 in place of Windows Vista, but would like to keep the files and programs I currently have installed on the Vista partition of my hardrive.

View 2 Replies View Related

Formatting The Install/Boot Partition - Low-Level Versus Quick?

Apr 30, 2012

I noticed when I went about doing a fresh install of Windows 7 on the HDD that shipped with my laptop, and using the partitioning and formatting options included in the installation routine, that when I'd do a format, the formatting would complete very rapidly. From this, I deduce that the installation routine does not perform a low-level format.Perhaps, from this I should conclude that a low-level format is completely unnecessary. Yet, I seem to remember reading somewhere online, at some point in time (note: this might have been back in the Win'95 days) that it's better to do a low-level format; to flip all the bits to zero.

View 8 Replies View Related

Deleting A Directory Structure Without Deleting The Name Of The Root?

May 9, 2012

With the command prompt of Windows 7 SP1, how do I delete a directory structure with their files without deleting the name of the root directory?

View 2 Replies View Related

How To Do Fresh Install On New HDD ?

Nov 5, 2009

My work machine's HDD is on its way out. It currently has XP Pro x86 on it. I got a fresh new HDD and upgrade version of Win7 x64 Pro.

I booted from the Win7 x64 disc, it went through its whole install thing on the new HDD, and then when it got to the product key, it wouldn't accept the one that came in the box. I read on the web that upgrade versions must have XP or Vista already installed for it to work.

But, the 7 documentation says I have to do a Custom install if I'm upgrading from XP. A custom installation deletes whatever is on the partition, I think. So how can it work when upgrading from XP?

I have actually gone back and installed XP on the new HDD (that had its own share of problems, couldn't even get the internet connection working), and now trying to do a custom installation of 7 again. When it gets to the product key section, should I put in my original XP product key? Or will the 7 product key work this time?

View 8 Replies View Related

Clean Install Using Partitions

Nov 10, 2009

I have a Vista Home Premium laptop and a Windows 7 upgrade disk. I want to clean install 7, but I want to keep hold of my files (I know I'll lose my programs). My laptop came with two partitions on the hard drive, C for the OS and D which I've used for files and backup. My question is this: can I clean install Windows 7 onto C without losing all the files that are on D?

View 4 Replies View Related

Inaccesible Partitions After Win 7 Install

Sep 15, 2009

I have installed Windows 7 next to my old Windows XP (so it's a dualboot situation). I have 2 physical HDD's (320 GB each) and 6 logical drives (2 + 4 primary partitions, all NTFS). After installing Windows 7, two of 4 partitions in one hdd have become inaccessible - disk manager still shows them, but I can't neither set a drive letter, nor view properties. I get the following error:

"The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by usin the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart computer."

Both of the inaccessible partitions are fine in Windows XP. Any ideas or solutions ? ;/

View 9 Replies View Related

Fresh Install Of Windows 7?

Oct 29, 2011

A couple months ago i bought my computer, it came with no windows 7 discs. How would i go about putting a fresh install of windows 7 on it?

View 12 Replies View Related

Fresh Install Windows 7 Pro X64 And SP1?

Mar 19, 2011

So I will be doing a new install of win7 pro x64 on my newly built rig. My questions should i go ahead and do the install and then install SP1 or install, get updates and wait until SP1 is pushed.I have a disk with the full SP1.

View 3 Replies View Related

BSOD Even After Fresh Install

Mar 20, 2012

I have been getting bsods recently at first it was only when trying to play BF3 i couldnt play for more than 5 min before bsod. now its moving its way into normal functions.i will include a dx diag and cpu z .txt file Here are the reports from the time frame i recieved the bsod. Iwill also include the one i got last night before i gave up.Let me know if there is anything else I should include

Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 3/20/2012 4:21:37 PM
Event ID: 1001
Task Category: None

[code]....

View 14 Replies View Related

Various BSODs On A Fresh Install?

Dec 22, 2011

I had a lot of trouble with blue screens on this system (as per profile) with a previous installation too, but never got round to dealing with it properly. So now, it's a less than week old installation that I've put very few things on yet, but crashes a *lot* when I try to run games. Does blue screen outside of this, just not as much.

The error codes vary, but most common is IRQL_LESS_OR_NOT_EQUAL.

View 9 Replies View Related

Fresh Install Right Now With Upgrade?

Sep 30, 2010

installing Windows 7 ultimate upgrade version on fresh install with new hardware right now. i will b checking this every few min.

View 9 Replies View Related

How To Do A Fresh Install Of Windows 7

Oct 1, 2011

I'm just wondering how to do a fresh install of windows 7, as it keeps freezing lately, ive tried system restore but keeps coming up that it hasn't done it...so id rather re-install from scratch again so ive got nothing on my system...Any help would be appreciated

View 3 Replies View Related

Windows 7 Fresh Install On SSD?

Mar 12, 2012

I am getting an SSD drive & going to be doing a fresh install of Windows 7. While I understand the process of configuring your system for usage of the drive (unplug the other drives so the SSD is only one connected while installing, turning off prefetch, etc).The part I'm confused with is how to move the users folder so it defaults to the "D" drive. I get I can "Move" the folder, Add the "Location" or do the "robocopy" method & create a junction.

View 1 Replies View Related

Fresh Install Plus Optimization

Dec 1, 2012

A new Samsung 840 pro SSD is on it's way with the courier and I will remove my present OCZ and will install a fresh Windows 7 pro. At present I have the SSD divided in 2 partitions C:system and D:Programs my first question regards the opportunity to keep the 2 partitions: is it good or bad for the SSD?

1) make an iso of partition D:programs
2) remove OCZ econnect the Samsung SSD
3) Check Uefi bios if AHCI is marked
4) Install 7 on C: (automatic alignment od the SSD)
5) Create partition D:

??Optimize?? Is it better to do it at this stage? Or after having installed various programs? I think at this stage but would appreciate your suggestions including what sort of optimization is advisable. I could eventually use RT7.Then I would copy from the iso all the programs on their own place D: and from the various distribution files will make the various setup (just for the programs to be registered in the Registry)

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved