How To Install New OS On Dynamic Disk (Old Corrupted)
Jan 3, 2012I have a problem on my hard disk & it is dynamic disk the OS is corrupted how to install a new OS to my corrupted Dynamic Disk.
View 7 Replies
ADVERTISEMENT
Dynamic Disk To Basic Disk When Windows 7 Is Installed On Dynamic Disk
Mar 13, 2011so i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
View 1 Replies View RelatedCan't Convert Dynamic Disk To Basic Disk
Jun 6, 2012Last night as I was attempting to install Windows 8 RP to test it out, I decided I would do a dual boot incase I didn't like it. It downloaded, burned fined and I went to make a new partition, and this is where things went south for me. It converted every disk to dynamic once I had created the new disk to install it on and for the life on me I can't get it to convert back to basic, so I'm pretty well screwed if something goes wrong. Things I've done:
1) Attempt system restore - Ok, so I didn't have a restore point created so this is of no help.
2) I followed this guide found here on SevenForums and attempted all 3 methods - nothing worked Convert a Dynamic Disk to a Basic Disk
3) I downloaed EaseUse Partition master to attempt to change dynamic back to basic, and still a no go.
4) Tried to install Windows 8 again and it would not let me delete the current dynamic disk partitions to start over
5) Tried HP recovery tools to set the computer back to factory condition and it wouldn't work.
Is it possible to delete everything and start over from scratch or will it still be dynamic? At this point, i want a time machine so I can go back before ever attempting to make a dual boot.
Create New Disk Parition Dynamic Disk Only
Mar 1, 2012I'm trying to create a new disk partition so that I can install Windows 8 (Consumer Preview) on it. However, I'm running into an issue here. When I go to create the partition, I get to the final step and this is what I run into (see image below).I'm thinking of just leaving the space unallocated and formatting it when I do my install of 8, but then I'm afraid that might render my Windows 7 partition unbootable. Will that happen?
View 1 Replies View RelatedConvert A Basic Disk To A Dynamic Disk
Sep 29, 2009How to Convert a Basic Disk to a Dynamic Disk ?
View 0 Replies View RelatedConvert A Dynamic Disk To A Basic Disk
Jan 11, 2010How to Convert a Dynamic Disk to a Basic Disk ?
View 0 Replies View RelatedHard Disk Error 'disk Structure Is Corrupted And Unreadable'
Sep 10, 2012I have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.
View 5 Replies View RelatedDynamic Disk In Windows 7?
Oct 10, 2012I have been using computers for a while but just recently started to learn what is really going on. I am having trouble understanding what a dynamic disk is. I have read a lot online but I need a very very simple explanation as I am an older person and a lot of the explanations I read online use technical terms which I also do not understand. I think what I have is a basic disk and I don't understand what a dynamic disk is. Can you have a dynamic disk if you have just a single regular physical disk, and if so what is the advantage.
View 3 Replies View RelatedDynamic Disk Creation In Windows 7 X64
Sep 14, 2011I have 2 x 750GB HDD's running Windows 7 x64. One of the HDD's contains data the other is blank. Do I have to format the drive with data on it to convert both drives to being a Dynamic Disk? I don't have a backup drive to move the data to whilst I create a Dynamic Disk so hopefully the answer is no?
View 2 Replies View RelatedWindows 7 Does Not Boot From Dynamic Disk?
Oct 8, 2012i changed my disk partitions as dynamic disks in windows 7 home basic (accidently) After i install windows 7 ultimate. It cannot boot from dynamic disk. it shows blank screen. What can i do. how do i recover it. my system cannot boot.
View 2 Replies View RelatedDynamic Disk Status Errors
Feb 20, 2010After dual booting my drive, it was suddenly changed to an offline dynamic disk. My problem is, I can turn it back online, but it gives me the status of "errors" I checked around for the past 12 hours, and everything says the same thing, turn it back online (it is) Reactivate it (That command is grayed out) Use Dynamic disk converter 2.1 (Says offline even though CMD says it is online)
Now, I am a bit frustrated, after 6 hours or so, my entire PC crashed, I did nothing special to cause this but hey it did. When I would boot up it would give "error loading OS" I checked all my drives, they're working PERFECTLY fine so I have no idea what is causing this. After I inserted my Windows 7 CD it seems to boot up fine now. I have two separate drives, one to handle my main OS being Windows 7 and the other to handle all my media which is the one that I cannot access anymore.
After reading dozens of articles I cannot find any solid answer that work for my case.
I am using the Windows 7 disk manager not a third party program, also, I have read all the 'help' from the microsoft website there is to deal with this problem. But nothing seems to work.
To help literate a bit more this is what my Disk Manager looks like:
Disk 0 Primary partition
Basic
38 GB
Online
Disk 1
Dynamic
errors
When right clicked on Disk 1 everything is Grayed out except properties, help, and Offline.
I don't know if any of this information will be of any help, I am trying to literate as much as I possibly can and give any evidence that might help.
Anyways, this entire thing has given me a huge headache and I have a huge term paper due x_x...
Invalid Dynamic Disk Detection In Windows 7?
Oct 20, 2012I recently took my internal hard drive and bought a casing for it and made it external. But when i connected it to my computer the disk management showed it as invalid dynamic. So i went online, read a bit about basic and dynamic and ways to convert the latter into former. I adopted the method of converting through changing "hex" using "HxD". Now when i changed the '47's to '07' , i got back my three partitions without any data loss one of which was system reserve. I do not know how to get the rest back. cannot loose the data. I have to get the other three back. Total no of partition =6 (including system reserve) No. of partitions recovered = 3 (including system reserve) No
View 1 Replies View RelatedComputer Does Not Start In Dynamic Hard Disk
Jul 25, 2012somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition. from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management. hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic.
and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD. reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming.
the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
Windows 7 Not Booting After Conversion To Dynamic Disk
May 2, 2010Ive squeezed all my brain juices out to no avail. [code] Ive been trying to set up software mirrored raid on my two HDs.I setup Win 7 as a clean install and then convert disk 0 to a dynamic disk. After that when i restart my comp, it just wont boot. Im left with the DMI pool data thing and a blinking cursor.
View 9 Replies View RelatedConvert Windows 7 Boot Partition Into A Dynamic Disk?
Aug 24, 2009I want to setup a Raid 1 mirror from one drive to another using Windows software raid. I know in XP you could not do this on the boot partition (C drive). Is it possible to do this in Windows 7?
View 2 Replies View RelatedConverting A Dynamic Disk To Basic Without Data Loss
Sep 11, 2011[FONT=verdana, geneva, lucida, 'lucida grande', arial, helvetica, sans-serif]I initially had 1 500gb dynamic disk, with one partition containing all my documents and windows files. I created a partition in the free space to copy my documents into so I could overwrite Windows keeping my documents intact. However I did not have enough free space for all my documents so after copying over one batch of files I shrunk the windows partition and extended my document partition. I had to repeat this again so I now have three extended document partitions.[/FONT] I then put in the windows CD, formatted the OS Recovery, SYSTEM Reserved and Windows parititions but then was unable to install Windows as it did not recognise any disks. I attempted FixMBR etc but to no avail.
I searched around and saw i may be able to change the sector hex from 42 (dynamic) to 07 (basic), but im wondering whether doing so will preserve the extended partitions i have? So my question is, will changing 42 to 07 preserve the extended partitions. Do I need to repeat for each 42 (like the link you posted) and then the three dynamic extended partitions will then become one basic partition? At the moment I can not actually see the data so have no idea how to back it up? Otherwise I would do as you say and back it up, format and copy back over.
[URL]
DISKPART: Acronis Disk Director (see documents spanned)
Active unDelete (again, three partitions)
HxD (showing 42)
So, basically im asking if i am safe to convert 42 to 07 WITHOUT losing any data?
Windows 7 Ultimate Not Booting After Conversion To Dynamic Disk?
Apr 2, 2012somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.but system is not booting...not opening..so i cannot go to disk management.hrad disk is showing some partitions with system reserved.except system reserved all the partitions are showing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.reinstalltion through OS DVD is possible by booting through OS DVD. but in advanced option repartition option is not coming.the one partition in which i installed OS previously, only in that formatting option is coming.in other partition neither formating option is coming nor extend.
View 5 Replies View RelatedConverting A Dynamic Disk To Basic Without Data Loss
Sep 11, 2011I have a 500GB dynamic hard drive which had a Windows 7 install on it. I wanted to reinstall Windows, so from within Windows setup I formatted the system and Windows partition, leaving a partition containing documents and pictures (i was unable to delete them). From then, Windows seemed unable to recognise the disk so i searched in DISKPART and found that the disk was labelled as INVALID.
After Googling around it looks as though i can simply change the 1C02 in the hex from 42 to 07 - however, my only concern was that the documents i have on this drive are spanned across three adjacent (dynamic?) partitions - so i am concerned that by focing the disk to be basic i will lose the connection between these partitions. [URL]
DISKPART:
Acronis Disk Director (see documents spanned) Active unDelete (again, three partitions) HxD (showing 42) So, basically im asking if i am safe to convert 42 to 07 WITHOUT losing any data?
Windows 7 Ultimate Not Booting After Conversion To Dynamic Disk
Apr 2, 2012Somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7..
View 3 Replies View RelatedDynamic Disk Conversion (HxD Hex Editor Shows 01C2 Is 0)
Jun 11, 2012I have recently accidentally converted my disk from basic to dynamic. I realised that doing this is bad because it does not allow me to install other operating systems on other partitions. After browsing google for a couple days i came across that you can change your disk by using a hex editor called HxD. I thought this was great so I downloaded HxD. I continued to the next step "Go to the offset 01C2 and change to a 7" here there should be a 47 (Dynamic disk)...... It was a zero (0).
View 9 Replies View RelatedWindows 7 Ultimate Not Booting After Conversion To Dynamic Disk
Apr 3, 2012somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition.
from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management.
hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.
reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
Convert Windows 7 Boot Partition Into A Dynamic Disk
Oct 12, 2012my hard disk converted to dynamic.now it is not booting, it have 300 gb data .i need convert in to basic and working normally.
View 2 Replies View RelatedChange Dynamic Hard-disk To Basic Hard-disk?
Nov 26, 2012i can not install dual-both window7 and window8 on my computer.i think that may be my hard is dynamite.not basic.
View 13 Replies View RelatedWindows 7 Ultimate Unable To Boot From Dynamic Hard Disk?
Apr 16, 2012somehow my hard disk partition became dynamic. i formatted system and insttaled windows 7 ultimate in the dynamic disk partition. from then onwards system is not booting. only black screen with cursor on the upper left corner of the black screen.
if i am not wrong windows 7 cannot boot with dynamic disk. i will have to go to the disk management and after conversion of dynamic disk to basic disk with deleting all the volumes (data). it is possible to boot with windows 7.
but system is not booting...not opening..so i cannot go to disk management.
hrad disk is showing some partitions with system reserved. except system reserved all the partitions are shwoing dynamic. and in only one partition formatting option and installing OS option is coming while i booting system with OS DVD.
reinstalltion through OS DVD is possble by booting through OS DVD. but in advanced option repartition option is not coming. the one partition in which i installed OS previously, only in that formatting option is coming. in other partition neither formating option is coming nor extend.
Partitioning - Operation You Selected Will Convert Basic Disk To Dynamic
Sep 27, 2012When I am trying to partition new drive from C drive. My C drive have 450 GB Space, so wanted to make a new drive of 250 GB. Did the basic steps but when clicking on Finish I get the following error "The operation you selected will convert the selected basic disk(s) to dynamic disk(s). If you convert the disk(s) to dynamic, you will not be able to start installed operating systems from any volume on the disk(s) (except the current boot volume). Are you sure you want to continue?".
View 1 Replies View RelatedUnable To Assign Drive Letter To Sata Dynamic Hard Disk?
May 26, 2012I formatted and installed windows 7 64 bit in a pc which previously had windows 7 32 bit. When i booted my 1tb dynamic disk was not detected. So I went into disk management and it had listed my disk as "Foreign Disk". So i imported the foreign disk.
The drive was detected and opened. So i rebooted the pc but now the drive is still not appearing in my computer. When i go to disk management the 1tb appears but there is no drive letter assigned. When i try to assign drive letter it statest that "Specified File cannot be found"
Disk Structure Is Corrupted And NUreadable
Apr 10, 2011I'm having a bit of problems with my USB thumb-drive. Whenever I try to format it (via Windows) it says "The disk is write protected." and on accessing, it gives the following error, The disk structure is corrupted and unreadable, I decided to look-up on internet to get this solved but didn't find any solution. It shows up under Disk Management as "RAW". There is no data in the drive (even if it is some, it's not worthy).
View 9 Replies View RelatedErrors After I Start Programs (corrupted Disk)?
Oct 27, 2011When I started my computer today windows was unable to full start. It got the the colorful welcome screen, and froze. I restarted and it went to chkdsk.So i ran chkdsk because it was highly recommended when I started my computer today.After a good 30 minutes it finally ended and told me a few files were unreadable and a few were deleted, scanned, etc. here is an image to help show what I mean:Afterwards, when I attempted to run Google Chrome, and a few other programs, I obtained an error message at the bottom of the screen, and when i clicked on the balloon, to hopefully get a reason or options on how to fix it, I got nothing and it popped up again, and again, and again.It is not stopping anything, it is not ending a program or closing any; it is just annoying and a little uneasing on my part of keeping this computer running.Here is an image to help express exactly what I see: how I could just turn the alert balloon off, but I would like a complete fix, not just 'duct tape'.Also, I have been getting this whenever i try to 1 uninstall a program and when I try to save an image/file:
View 4 Replies View RelatedExternal Drive Not Recognized In XP Now Disk Structure Corrupted / Unreadable
Jan 15, 2013We had an external USB drive with tons of media files on it connected to computer A running Windows 7 Pro SP1. The drive was safely removed and connected to another computer that was running Windows XP Pro 2002 SP3. I was told that the drive was not recognized in XP and that it was disconnected (I cannot say for sure "Safely") and returned to the Windows 7 computer. Once the drive came up I get the following:
K: is not accessible. The disk structure is corrupted and unreadable.
I know every drive fails eventually and I'm not sure how old this drive is. Any utilities to use to try and repair the file structure. I have only tried rebooting the Windows 7 computer and that did not change anything.
Install Dynamic Link Library?
Oct 18, 2011Install dynamic link library?
View 1 Replies View RelatedUnable To Install Windows 7 - Dynamic Partitions?
Apr 10, 2011Damn Windows Update started installing a video card driver. My system is a Dell Vostro 430 and has an ATI HD 4350 (I think), but however, for some stupid reason it can only work with Dell's video driver. So when Windows Update installed the official driver for me, by the time I realised what it was doing it was too late. My screens went black; an incompatible driver screwed everything up.
Worse yet, it was still installing updates, so I was scared to turn my computer off in case it would create major problems. After waiting for four hours I decided it was time to pull the plug. After restarting the computer, it kept rebooting when it started loading Windows 7, and then soon after it didn't even get that far; it told me there was no compatible SATA device found and it refused to boot full stop. Trust this to happen at assignment hand-in week. I've got so much work to do.
I went to the library and downloaded an Ubuntu ISO and burned it to disc. I also got a legit ISO (I'm a student and use MSDN) of Windows 7 x86, since Windows 7 x64 had its problems with the software I use for my course. First of all I backed up all of my uni work using Ubuntu as a live CD, which worked okay. I moved other important data from my Windows (main) partition to my other partitions (Music, Games, TV/Films, etc) since I knew I was going to be formatting my system partition for a reinstallation.
I have two HDs installed. A 500GB one and a 1.5TB one. The drives seem to still be working since I could access them in Ubuntu. However, most of the partitions were formatted as dynamic partitions, not basic. It seemed that the partitions on my 500GB drive were basic, whereas the ones on my 1.5TB were dynamic. This is why it disallowed me to install Windows 7 on the 1.5TB drive. (It dislikes dynamic partitions for whatever reason.) However, I formatted the original basic system partition and started installing Windows 7 x86 on it. It got to 100% and was finalising installation, until it halted, told me the installation had failed, and that I'd need to restart and try again. Every time I have tried, it has failed at that point.
I don't know what the heck to do. I can't remove the partitions that exist because they contain a lot of data that I really want. I also have no means of backing up the data. I have no DVD discs left (and it would take a damn lot to back up hundreds of gigs), and no external HDs. Just for the sake of trying it out, I tried installing 7 x64 and got the same error, so I don't think it's x86-specific.
