Unable To Resize Partitions Correctly?
Feb 21, 2012
i am trying to take some un-allocated spots in my partition to increase my main partition. However, I am trying to do so and cannot, The program i use (Easeus partition manager won't allow me to extend one of my partition to include allocated space, also according to Easeus the partition is allocated but according to disk manager in computer management in administrative tools, its an extended partition that won't let me delete it and says "There isn't enough space available on the disks to complete this operation." How should I proceed?
View 9 Replies
ADVERTISEMENT
May 1, 2012
I am running W7 pro 64-bit. I have just installed a 1TB drive from another machine, which already had some onfo on it which I wanted to keep. I shrank the disk- using Disk Management- to create 2 partitions. Is it possible to un-shrink the disk?
View 1 Replies
View Related
May 16, 2012
I'm using a Thinkpad T420s, dual booting Windows 7 and Fedora 16. However, prior to me installing F16, I used Disk management to shrink the Windows partition. Well...it turns out I shrunk it *way* too small and I'm barely able to use it. Under Disk Management, even if I create unallocated space, it still will not let me re-size my windows partition. I think this is because the partitions are in the wrong order...but I don't know what to do about it.
Disk management shows four partitions as follows from left to right:
| SYSTEM_DRV (1.46 GB, Primary) | Windows7_OS (67.47 GB, Primary, Boot) | (500 MB, Primary) | (76.63 GB, Primary) <--Fedora 16 |
No matter what I do, I cannot click "Extend Volume" on my Windows 7 partition. I would experiment and use certain bootable partition tools, but I'm afraid I'm going to mess with GRUB and I won't be able to boot either one of my OS's..
View 1 Replies
View Related
Feb 26, 2011
I was playing around with a program called PartitionMagic, because I wanted to convert my external harddrive from NTFS to FAT32, but it didn't work, so I tried another program. Partition Manager. As soon as the installation started, the computer had a BSoD, and has started having this every time I try to boot the Computer.At first I thought this was only caused by the harddrive, but I put it to a test, by removing the harddrive, and adding my laptops harddrive instead. Sadly the same thing happens. It boots into the Windows logo, and then a BSoD appears, restarting my PC yet again.I've tried launching the Startup Repair, but it results in failure. The description tells me that the "Boot Configuration is corrupt", so I tried searching for a fix on this.
That led me to trying bootsect.exe and bootrec.exe on the command prompt, through both the advanced startup repair thing, and through the Windows 7 Installation DVD.Even though all the commands I've ran say they were executed successfully, it still gives me a BSoD on startup.As a last resort, I tried to format my harddrive through the Windows 7 DVD. This is where I noticed that it recognizes my harddrive, but tells me there is only 100 or so mb on it.Also if I try to do a system restore, it gives me "an unexpected error: A device attached to the system is not functioning. (0x8007001F)
View 12 Replies
View Related
Nov 22, 2009
every few days my computer seems to stop letting programs open. If I try to open a program like Firefox, for example, the window just never shows upThen trying to open the Task Manager gives me an error saying, "This application was unable to start correctly. Click OK to close the application."I honestly can't think of what the problem could be. This is happening on a fresh install of Windows 7 Professional 64-bit from about 3 weeks ago
View 9 Replies
View Related
Aug 22, 2012
. HP pavilon dv4- 1318TU having 4 gb ram and 320 hard disk, dore2 deo processer ... now im going to explian every thing... my pc hav windows vista inbuilt.... i upgraded... to Windows 7 ultimate.. manytimes.. and now this time 1 yr later... i installed Windows 7 home premium... 3 days b4.. and now too.... when ever i open any application .. this appears... THE APPLICATION WAS UNABLE TO START CORRECTLY (0X0000005).CLICK OK TO CLOSE THE APPLICATION ANTIVIRUS is not working too.. i did disck check no errors.
View 3 Replies
View Related
Sep 1, 2012
I could not find any solutions to this bug on the internet right now so I am coming here to see if anyone has a solution. This is the exact error that I am getting."The application was unable to start correctly (0xc0000142) Click OK to close the application"..This happens whenever I open a .exe or application type file. I cannot get into Command Prompt as it says it when I try to enter that also.I do not want to re-install Windows 7 on my computer because I have important stuff on my computer.
View 6 Replies
View Related
Jul 20, 2012
Every time I try to log in to my user, (which is administrator) I am met by a box containing the error in the title. I am able to use safe mode fine (which I'm using now) and have tried doing numerous scans and fixes such as SFC-Scannow, Norton Antivirus and System Restore but each one cannot find any threats. Close to the time this started happening, I turned off my laptop by the power switch instead of using the "Start" menu as it was taking ages to switch off.
View 2 Replies
View Related
Aug 21, 2012
The above error message comes up when i try to open anything, the computer is running extremely slowly.I am not very technical when it comes to computers.
View 5 Replies
View Related
Oct 6, 2011
Earlier today, my computer is not working properly since i started it up.An error would show everytime a programs try to start.It would show " The application was unable to start correctly (0xc00000b5). " everytime i try to start google chrome. Other programs like games also creates error, some with different error codes like (0xc0000185).Steam has creates a different error which says " Steam.exe(main exception): Unable to load library SteamUI.dll, Win32 Error 121 "The semaphore timeout period has expired."However, some programs like internet explorer, photoshop and microsoft office would work, which i suspect is because they are 64bit softwares.
View 1 Replies
View Related
Sep 23, 2011
i couldn'nt open media players ms office -excel word and i couldn't run all my software in desk top i receive the messege "The Application wasnable to start correctly 0xc0000142
View 1 Replies
View Related
Nov 18, 2011
I don't what happened but all of a sudden a message box opens up on my windows 7 laptop and it says this " the application was unable to start correctly (0xc0000142). Click OK to close the application" . I clicked ok but the error message box keeps returning back. If i remember properly, this is happening when I tried installing some wallpaper.
View 6 Replies
View Related
Apr 15, 2012
i can't open the mars3 grphics cardgame. the application error 0xc0000142 has occured
View 1 Replies
View Related
May 15, 2012
i can't play the witcher2 game
View 1 Replies
View Related
May 16, 2012
The application was unable to start correctly (0xc000007b). Click OK to close the application.
View 5 Replies
View Related
Jun 12, 2012
i get so far with the application , on the last part it comes up with error, exc0000142
View 1 Replies
View Related
Jul 30, 2012
I have been getting this message on my laptop for almost a week. This application was unable to start correctly (0xc0000142).
View 7 Replies
View Related
Aug 21, 2012
Reinstalled windows on my pc and when i go to play a game it comes ups with an error "The application was unable to start correctly 0xc000007b"
SPECS:
Windows 7 ultimate 64bit
AMD athlon quad core 3ghz
AMD Radeon HD 5770 series
4gb ram
View 5 Replies
View Related
Jan 9, 2013
can't play black ops 2 on my pc. says "the application was unable to start correctly (0xc0000022) click to close application" asrock z77 extreme4i7 377016gb g.skill viper memory (4x4gb) ddr3-1600 cl9ocz agility4 ssd 256gb sata3seasonic m12ii-750 power suppply 750watts m-series
View 6 Replies
View Related
Jun 29, 2011
I am getting a Login Error on a Laptop. This is the error "The Application was unable to start correctly error(0x000005) click ok to close the application".
View 3 Replies
View Related
Apr 1, 2011
Today while listening to a song. My computer restarted with a BSOD. It then asked me to repair my computer saying that some boot record is corrupt. I repaired my computer from the cd. It works fine but now i can only see my C: and no other drives are being shown though the data is still there. I cant see the remaining three partitions in my computer
View 9 Replies
View Related
Sep 10, 2009
I am using VMWare Workstation 6.5.3 in my Windows 7. I have set up Ubuntu Linux as a virtual machine & added the partitions (NTFS) from my existing physical disk via Add disc in VM settings window. Problem is
though they are visible in Ubuntu but when i try to open them i get the below authentication window..
"troy007" is my user id in ubuntu.
in spite of typing the correct password, i get the below error message
Nothing happens on clicking "Retry" or "Continue" & if i click "Abort", the ubuntu session gets disconnected.
Wats wrong?
View 9 Replies
View Related
Aug 16, 2011
I have a problem that occurs only during shut down only. When I select Shut Down I soon get a pop up that says....the application was unable to start correctly (0xc0000142) Click OK to close the application. the label on the window is cmd.exe. Whether I click on the window or not, the shut down proceeds and eventually after say 30 seconds the alert disapears and the laptop shuts down. clicking on the alert simply brings up another alert. All this only occurs during shut down only. Also, I have no problem running cmd.exe during normal operation, or any other program run from the command window. I have read a number of posts but do not see anything exactly like this, that is happening during shut down.
Here is the TSG SysInfo
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Professional , 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU T9600 @ 2.80GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 8088 Mb
[code]....
View 1 Replies
View Related
Jul 12, 2012
The application was unable to start correctly (0xc0000142).click OK to close the
View 2 Replies
View Related
Apr 10, 2011
Damn Windows Update started installing a video card driver. My system is a Dell Vostro 430 and has an ATI HD 4350 (I think), but however, for some stupid reason it can only work with Dell's video driver. So when Windows Update installed the official driver for me, by the time I realised what it was doing it was too late. My screens went black; an incompatible driver screwed everything up.
Worse yet, it was still installing updates, so I was scared to turn my computer off in case it would create major problems. After waiting for four hours I decided it was time to pull the plug. After restarting the computer, it kept rebooting when it started loading Windows 7, and then soon after it didn't even get that far; it told me there was no compatible SATA device found and it refused to boot full stop. Trust this to happen at assignment hand-in week. I've got so much work to do.
I went to the library and downloaded an Ubuntu ISO and burned it to disc. I also got a legit ISO (I'm a student and use MSDN) of Windows 7 x86, since Windows 7 x64 had its problems with the software I use for my course. First of all I backed up all of my uni work using Ubuntu as a live CD, which worked okay. I moved other important data from my Windows (main) partition to my other partitions (Music, Games, TV/Films, etc) since I knew I was going to be formatting my system partition for a reinstallation.
I have two HDs installed. A 500GB one and a 1.5TB one. The drives seem to still be working since I could access them in Ubuntu. However, most of the partitions were formatted as dynamic partitions, not basic. It seemed that the partitions on my 500GB drive were basic, whereas the ones on my 1.5TB were dynamic. This is why it disallowed me to install Windows 7 on the 1.5TB drive. (It dislikes dynamic partitions for whatever reason.) However, I formatted the original basic system partition and started installing Windows 7 x86 on it. It got to 100% and was finalising installation, until it halted, told me the installation had failed, and that I'd need to restart and try again. Every time I have tried, it has failed at that point.
I don't know what the heck to do. I can't remove the partitions that exist because they contain a lot of data that I really want. I also have no means of backing up the data. I have no DVD discs left (and it would take a damn lot to back up hundreds of gigs), and no external HDs. Just for the sake of trying it out, I tried installing 7 x64 and got the same error, so I don't think it's x86-specific.
View 5 Replies
View Related
Dec 5, 2009
When i installed is version of win7 ie,Tiny7 Rev01 By experience. After that i tried to rename the drives(partitions) in 'My Computer' the first one ie,C: got renamed but the others r not. When i right clicking the a drive suppose D: & click to rename the edit cursor comes but after clicking OK it stays as 'LOCAL DISK D', but earlier when i installed this same version there was no such problem.
Anyone has any fix? If yes then plzzzz help me guys. Waiting for your response desperatly..
EDIT: One info i forgot to write here ie,I have A dual boot..i have XP installed in a other partition ie,C:..When i rename any partition while logged in win7 it not get renamed as i said but after that if i restart & log in XP then that specific partition which i renamed i win7 shows in XP..Eg:Suppose i renamed the C: as Master in Win7...it stays as local disk as in the sc above...but after that when log in Xp the C: shows as Master...&& in Xp everything is normal..
View 8 Replies
View Related
Jun 2, 2010
I have an Acer Aspire 1810TZ with Windows 7 Home Premium 64-bit. The HDD is 160GB.Yesterday I moved (without resizing!) both the 100MB system reserved partition and my 40GB C: partition towards the "beginning" of the HDD for the purpose of creating an unallocated space of some 110GB towards the "end" of the HDD. (The C: partition had previously been shrunk using Win7 disk management and the system worked fine after reboot prior to partition move).llowing the partition move I can however not boot into Windows anymore. Windows boot manager gives the following info:Status: 0xc0000225Info: The boot selection failed because a required device is inaccessibleThe boot manager also suggests I reinstall Windows, but of course the restore and rescue DVDs I burned based on Acer's eRecovery tool does not work.
View 4 Replies
View Related
Dec 2, 2012
When I try to restart Win 7 (64bit) I get this error message from apache.exe or mysqladmin.exe like this "the application was unable to start correctly 0xc0000142"
I get this error since I have installed EasyPHP
View 1 Replies
View Related
May 23, 2012
The error states:explorer.exe - application error The application was unable to start correctly (0xc0000022). Click OK to close the application.When I click OK, i just have a black screen. I can get the task manager going by hitting control, alt, delete. I've tried to start explorer.exe from the file menu, but get the same error.
View 1 Replies
View Related
Aug 15, 2010
I tried to replace 3 files in the system 32 folder, and must have made a mistake along the way leaving my laptop inaccessible once logged on. The three files were:
uxtheme.dll
themeui.dll
themeservice.dll
I received these error messaged when logged on:dwm.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.explorer.exe - Application error the application was unable to start correctly (0xc000007b). Click ok to close the application.Can system restore revert back the files so it was like i never attempted the patch?
View 2 Replies
View Related
Sep 15, 2011
I got this error message when i open my chrome browser "the application was unable to start correctly (0xc0000005)"
View 4 Replies
View Related
