I'm not sure what the trigger was but my C drive where my os is installed apparently took the drive letter of an external drive that I use for backup. It is now the X drive and I cannot boot. I do get the repair screen but cannot repair as there is no operating system to choose. Booting from windows disk makes no difference here.My bios (uefi) can see the disk, I can also see it from the command prompt?
View 4 RepliesI have windows XP pro 32 bit installed in C drive and then installed clean win 7 64bit in drive D. Everything works properly but when I boot from XP, it is in C drive and I see Windows 7 in D drive, when I boot from Windows 7, I see win 7 in C and winXP in D drive. Is it normal or is there any I can do to fix win Xp in C and Windows 7 in D?
View 3 Replies View RelatedI recently built my computer and installed a ssd and a hdd, the OS is on the ssd which is the c drive but since it is smaller than the hdd I tried to change the letters around and make the hdd the c drive using regedit because the default install location seems to be the c drive and after restarting the computer it boots up and says preparing your desktop then goes to a blue screen with just the cursor. I tried booting in safe mode and all I get there is a black screen also
View 9 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedMy new Windows 7 computer has been made unbootable because I tried to change a drive letter. What can I solve this problem ? How can I prevent the same thing happen again? I will explain what happened. Yesterday, I booted my Windows 7 computer and as it was booting I plugged in my camcorder in a spare USB port.When it booted, I saw that the letter of my external hard drive had changed from I to J. I could not have this for then the Search documents function would not work. So I opened up Disk Management and tried to change the drive letter from J to I but the letter I was not available. I had used Disk management before and I knew that the drive letter I must have been used by some obscure drive in my computer. I decided to change the F drive to R in an attempt to make the letter I available. I then tried to change the letter drive from J to I and this time the drive letter I was available. I changed the drive letter but I did not restart my computer immediately. Later I shut down the computer.But when I tried to boot up my computer again, it would not boot at all. I changed the plug fuse 3 times and the same thing happened so I know it was not plug fuse. I have all my data and my Acronis backup in my external hard drive.What am I going to do?
View 5 Replies View RelatedI want to change the drive letter of the drive on which Windows 7 is installed.It is currently F:, and I want to change it to K:It is not possible from the Disk Management as I tried.
View 2 Replies View Relatedmy boot drive leter. recently bought a ssd installed my edition of win7pro 64 onto it no problems except i had my old hdd still plugged in which was my c drive letter ,thus i installed operating system onto my ssd with an e drive letter.ok so i have tried to run a couple of programmes which i use which have failed because the programme is looking for a specific file in c boot directory which i obviously havent got....hope you can understand what im getting at.so big question how do i change my ssd boot drive letter to :c and that all my existing programmes will still work.
View 9 Replies View RelatedI deleted my existing OS then created two new partitions on the same drive. Then I installed Vista on one partition and that partition was properly named "c" as ususal. Then I started Windows 7 setup.exe from a different hard drive and let Windows 7 install itself into its own partition. When I got to "My Computer" the Windows 7 partition was labelled as "I" instead of the expected "C" which had never happend before when I did the same thing.
Does anyone know a save way to label the Win 7 drive as "C" while in Windows 7?
In 7 everything is all right.7 is c: and the boot partition is hidden.
But in XP the hidden partition is c: and visible.XP is d:,so some programs use default dir can't work.I tried disk management to change xp to c: but didn't succeed.
Anyway to change the drive letters and hide the 100m partition?
My goal is to run a Windows 7/Windows 7 dual boot system with one installation for day to day operations (MAIN) and then second installation strictly for gaming (GAMER).
I have successfully installed Windows 7 twice. During clean install i created 30GB partition (C: ) and put MAIN there. No problems. I loaded that up and from within Disk Management created a second partition on the same physical drive and named it (D: ).
I booted from the Windows 7 install DVD and then installed GAMER to the (D: ) partition. No problems. I am able to boot into each installation (MAIN and GAMER) from the boot manager without any troubles.
When I boot into the MAIN installation, the system path/partition is (C: ) and the os files for the second installation, GAMER, can be seen on (D: ) just fine.
However, when i boot into the GAMER installation, its system path is also (C: ) and the partition for MAIN somehow got renamed to (G: )
I would like it so that when I boot into MAIN (which was installed to C: ), that partition stays named (C: ) and when i boot into GAMER (which was installed to D: ), that partition stays named (D: ). Eventhough both installations see themselves as (C: ) when i boot into them, it does not seem to cause any problems.
So how should I do my second Windows 7 installation to a partition named (D: ) and force it to keep that name when i boot into it?
I'm using multiple hard drives to install both fedora and Windows 7. I've followed this online tutorial exactly: Dual-booting Fedora 14 and Windows 7 on a computer with 2 hard drives
The problem I seem to be facing is on the "Add a new Entry Step". His secondary OS partition has a drive letter assigned to it and I do not. I've gone into computer management and have tried to assign a drive letter to either of my secondary OS's hard drive partitions and it will not let me.
All I need is the boot loader to link to my second hard drive when the second option (OS) is chosen.
I lost my Event Viewer, and had to do a repair installation to fix it. Unfortunately, during the repair install, Windows decided to rename my second HD as the D: drive... it was K: before that. Now I cannot access any of my docs, pictures, music, or videos through the normal means... they don't show up in libraries or explorer, and apps like Restorator and Sure Thing (CD labeler) cannot find them. I think that means the paths are broken..?
It won't allow me to rename the HD back into K: (it's not listed as available). I can access the data by clicking Computer > D, and I can see the data is there, but its unusable as of now. Any ideas?
I originally was running Windows Vista x64 as my sole operating system. When the Windows 7 beta came out, I created a new partition and began dual-booting. I have been using that beta as my primary OS for several months, I think, keeping the other drive and the dual boot capability. I can't remember for sure, since I have blank DVDs but can't find a Windows 7 beta DVD, but I -think- that my method of installing the Windows 7 beta was as follows:
1. Mount Windows 7 beta ISO with Daemon Tools Lite
2. Run the setup program from it (or maybe I extracted the ISO to a directory and then ran the setup)
3. Install Windows 7 to the D: partition that I had created, while running Vista
4. The beta automatically configured dual boot. If I booted Vista, Vista viewed "itself" as drive C, and Windows 7 as something like drive D. If I booted Windows 7, it viewed "itself" as drive C, and Windows Vista as drive E. This was perfect.
I've been putting off installing the RC due to being busy/lazy, but I finally tried doing it over the weekend. I have tried four times, and all four have met with the same fate. The dual-boot configuration that gets generated looks right. Windows Vista boots viewing "itself" as drive C, and 7 as drive D. Windows 7, however, views "itself" as drive D, and Windows Vista as drive C.
Windows 7, 32 bit, 12 partitions on 3 hdd's, Windows 7 on C:
When migrating to Windows 7 I first tried to update my Vista which I had used happily for 2 years. Installation went fine, but there were too many problems after.
So I bought a new 1 GB hdd and installed Windows 7 there from scratch. It is on a partition with drive letter C. I copied most of my old partitions to the new hdd, went fine.
When trying to delete one of the old hdd's with EASEUS Partition Master Home 4.1.1 manager software, there is one partition on it (which once before was called C, then successfully renamed to Z ) which I can't delete. I has on it the following folders:
$RECYCLE.BIN
Boot
System Volume Information (locked)
-->and files:
BOOTSECT.BAK
bootmgr
They are only 30,5 MB in size. So I resized the partition to 1 GB.
EASEUS characterizes it as Status = System, Pri/Log = Primary. Windows Disc manager characterizes it as System, Active, Primary Partition.
My question is: Can I change the drive letter from Z to B without risking the whole system to be unbootable? (and maybe never be bootable again?) When trying I just get the usual Windows warning.
I would be most grateful for an answer explaning what and why or why not.
I needed a good backup program so I downloaded a trial of MirrorFolders. I have two identical 750GB drives in my laptop: C (my main drive) and Z (my backup drive). MirrorFolders made an identical copy of C onto Z. That wasn't what I really wanted, because C is partitioned into D and E, and MirrorFolders didn't mirror the other two partitions. The backup methodology wasn't exactly what I was looking for, so I uninstalled the program. After uninstalling MirrorFolders, the machine is now booting to the Z drive, which means I can't format it and try another backup program.
Is there a simple way to restore the boot ability of my C drive? I read a great deal about copying boot folders and such, but I wasn't exactly sure if these were the right answers and I didn't want to screw things up any worse. I figured I could go into the BIOS and disable the Z drive, but no luck. The machine couldn't find a bootable drive, even though C supposedly has the same files as Z.
I changed the boot drive in the BIOS to a new drive. I thought it worked but when I check Disk Managment in Windows 7 it still shows the old drive as the boot drive. Is there something I have to do in Windows to finalize the change?
View 3 Replies View RelatedI changed the boot drive in the BIOS to a new drive. I thought it worked but when I check Disk Managment in Windows 7 it still shows the old drive as the boot drive. Is there something I have to do in Windows to finalize the change?
View 1 Replies View RelatedI have Win 7 home premium on an HP laptop with 4 usb ports. I have 2 Western Digital Elements 1.5 TB drives for backups. If I plug in one of the drives, Win assigns a drive letter, but if I add the second one it doesn't.
To troubleshoot, I've plugged each drive into every usb port on the laptop, and each port reads each drive alone, but if I plug in the second drive while the first is still in, it shoes up in devices but does not get a drive letter. I tried assigning a different drive letter to the device plugged in first, but Win still doesn't assign a letter to the second drive.
One drive appears to have duplicated itself by populating any drive letter thats free! Tried simply deleting the ones not needed but they reappear?
View 1 Replies View RelatedI decided to just revert to my old XP64. At first I was gonna try to dual-boot, but the fly in the ointment was all I had was an image on my external HD, which has about 100G of other stuff on it. My disc drive would not for the life of me burn an ISO image on any of my three DVD types. And the process of trying to find how to fix the drive problem and/or create just a bootable PARTITION on a HD without effecting everything else just drove me insane...which is kind of where I am now. After a week now I just have to get back to my project. lol And if that means no fancy windows 7 internet experience..while attempting a dual-boot scenerio workaround, I shrunk partition C and created a new 5G partition at the end of it. In EaseUS, I assigned it letter B and I set it to active, figuring it was to be bootable (wrong, I know). Additionally near the same time in Folder Properties, I unhid system files, folders...etc.
NOW the System drive showed as F! Then, attempting to use EasyBCD, it told me it could not find the BCD files to begin. So, naturally it had to do with that.I thought maybe it should have been B, but why would Ease US give me that letter option?After showing Easy BCD the file it seems to be OK....there. Also in Startup & Recovery it is listed in System Startup as the default system. But is it OK?Also, should it also be active. Did I inadvertently switch it by making the new partition active? What should I do to get it to boot properly. I AM planning on booting XP from a flash drive anyway, but still.
My backup software's profile database is expecting to backup to H:, which was the drive letter for my external backup drive back in XP. This drive comes up in Windows 7 as K, because Windows 7 has given my four usb card reader drives the letters F,G,H,I.
Disk Management will not show these four card reader drives unless media is inserted (connected vs. disconnected). I have changed the letters for F,G,I to T,U,W, but only because I have those types of cards (SD, CF, MS)...I do not have an XD or SmartMedia card for the one dang drive I really need to change.
What are my options, other than buying the cheapest SM card I can find to make the drive visible for this task? The SmartSyncPro database has many profiles, so remapping all those to point to K would be a major hassle.
I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
View 6 Replies View RelatedGot this from directory opus site, but made new registry file for you.
1. - unzip drive icons to - C:DRIVE ICONS
2. run registry file
3. reboot pc
Voila!
to undo run the restoredriveicons reg file.
here is original link - http://resource.dopus.com/viewtopic.php?t=7089
I have a new copy of windows y 64 bit ultimate. I currently use w7 64 home premium and it is on C drive and the drive is a sata 2 drive. But when I build my new system I want to install onto a new drive which is sata 6.0 and I have made a partition on that drive (letter M) for the O/S to be installed onto ( ive allowed 150Gb ).
So my question is when I build my system and am ready to install w7 can I install onto drive M on the new sata 6.0 drive?
I will unplug the old boot drive as I understand windows will boot to that if I dont unplug it, then when I have installed new O/S on the new drive, partition "M", I will plug it back in and format the old boot drive.
So then windows will boot to drive/partition M, if that works, and C drive will just become a data drive. I understand I probably will have to do some messing in bios, so any help with that will be good.
this will be my 1st build but I am not to bad with computers and have changed cpu's/HD's/gpu's/fans etc etc. but not mobo's and cases. And never changed a O/S onto another drive with a different boot drive letter.
i want to change a HDD drive letter from F to D, this drive has games and apps installed on it, will those still run ok after i change the letters?
FYI the OS is on a seperate drive C
I just built a new computer which I am trying to set up identical to two of my present ones. The first terabyte hard drive is divided into 5 partitions, C thru G. Windows 7 is on C and Windows XP is on D. The other three partitions are categorized storage. I also added two more terabyte drives which are supposed to be H & I. Since my CD/DVD rom had assumed "H" in Windows 7, I reassigned the drive letter "J" to it. When I installed what was supposed to be my "H" drive, it showed up as "I". When I attempted to reassign the drive letter "H" to it, "H" is not on the list of available drives, So I tried renaming it to "Q" and then back to see if "H" would show up. It didn't. I went ahead and put the final drive in It was supposed to be "I" drive and indeed it came up correctly as "I" drive. So everything is in order now except for my "H" drive which still remains as "Q" until I can figure out how to make the "H" drive letter become available again. This si important to me since I do regular synchronization between my other computers and the drive letters need to be matched on all of them.I am not on the new computer right now, but on my last built one which has the same setup. I didn't seem to have any problem on this one since the drive letters are all on order. I've never had a lick of trouble getting them right on the XP partitions.What do I need to do to get "H" back on the list of available drive letters?
View 4 Replies View RelatedI previously shared my iTunes library from my desktop computer which was running Xp x64 Professional, and accessed the library through a M: drive that I could access on my laptop and other computers in the house. I set up the M drive following these instructions found here from LifeHacker and here from Microsoft previously.
I decided to try the same with 7 and everything goes according to plan until I get to the part where I go to add the new "M" drive and I can not click to "Assign the following drive letter" followed by letters that I can assign this new drive. I can only select "Mount in the following empty NTFS folder." Is anyone familliar with this issue and tell me what I am doing wrong?
I just got a couple of new HDDs to make notebook backups (clones) on. When I first formatted each one, using a USB dock, I set the drive letter of each one to U. Everytime I change the drives, the drive letter changes itself to E. I change them back to U but they change themselves back to E the next time I put them in the dock. What is going on here and how can I keep the drive letters from changing?
View 4 Replies View RelatedRecently I have found that when I attach an USB drive to my system I have to go into "Administrative Tools -> Computer Management - Disk Management" and manually change the 'Drive Letter and Path' for the drive.
Does anyone know how to get Windows to assign a drive letter to the USB drive automatically?
till 2 days ago, when I connected a USB stick or any other USB device, it was given a driver letter automatically and a window prompted for which actions I want to do.Now (after a windows update?), the drive doesn't receive a drive letter automatically. I have to go into disc manager a give manually a drive letter in order to be able to use the drive.
View 4 Replies View RelatedI had windows 7 on a SSD drive, assigned C: by windows 7, but it was full so I decided I'd clone it onto a bigger SSD drive using Acronis Disk Director. Went swimmingly I thought, both drives contained the same data. I wasn't too sure what my next step ought to be, whether acronis will have sorted it so that my new SSD now has the orginal SSD's drive letter or not. If it did, it will be mean a simple transition. But you guessed it, it left the drive letters the same, so when I booted up, it loaded from the orginal SSD. I then changed the original SSD drive letter, and used EasyBCD to remove the original boot and create a new one with the new SSD. Unfortunate now when I boot up Windows 7 I get a Preparing Your Desktop message for a couple of mins, but it's then followed by a screen with a cursor but no desktop icons or taskbar. It also seemed unresponsive to keyboard strokes.
View 3 Replies View Related