Changed Windows 7 Computer Name; Now Won't Boot At All?
Oct 29, 2012
I was working on setting up a PC for network usage with the understanding that it hadn't been used muchpreviously.Unfortunately I found that it had a PC name already existing on the network and went to change the PC name and IP address as needed for a static IP environmentHowever, after selecting to "restart" the system never rebooted up and I cannot seem to access the CD drive to place a restore CD or basically do anything with the PC.Any ideas on what happened?I've unplugged the computer and waited a few seconds to plug it in.Once replugged it returns to having the basic lights on it blink about once every few second and appears to be otherwise disabled.
View 1 Replies
ADVERTISEMENT
Jun 6, 2011
All I did was open a video strored locally with no connection to the internet. Shut down computer properly. I go to start it up and start up repair kick in. I have let the thing run on startup repair over night and a total of 12 straight hours. It reboots once, maybe even twice. Then it just sit a says attempting repairs. I just did a hard shut done. I was able to pull the data off using Uburba (not sure of the spelling). The USB 2.0 is not recognized in start up repair command prompt. I had a image saved to a CD. I can't get past the username password. The one I had wrote down does not work. System restore fails because I can't it doesn't have a .DDL file or it says something. If I could get the USB 2.0 to work I have an external that has a couple of images that would be better than re-installing. I tried moving the image into the computer then using the image restore, but I learned that doesn't work because it somehow tracks were it wrote the image to. This is way I need the usb 2.0 to pull the image from my external HD.What is the default password of HomeGroupUser$?
View 3 Replies
View Related
Apr 4, 2012
just installed an asusM5A97 mobo. hdd and everything else stayed the same. problem is, it will only make it to boot screen no matter what. i tried repair and open normally but it still will not let windows boot.
View 4 Replies
View Related
Jul 10, 2012
I recently built my computer and installed a ssd and a hdd, the OS is on the ssd which is the c drive but since it is smaller than the hdd I tried to change the letters around and make the hdd the c drive using regedit because the default install location seems to be the c drive and after restarting the computer it boots up and says preparing your desktop then goes to a blue screen with just the cursor. I tried booting in safe mode and all I get there is a black screen also
View 9 Replies
View Related
Dec 19, 2012
Yesterday I was attempting to wipe my hard drive as I was putting my laptop for sale. Whilst it was wiping my laptop crashed and would not re boot properly but I was able to access the BIOS . I stupidly changed some settings following some advice on a forum I now cannot find and when I tried to re boot it stays on the philips page for around 10 minutes. None of the keys work, like F12, F2 ect. After ten minutes it give me a screen thats says 1.Insert your Windows installation disc and restart the computer.2.Choose your language settings, and then click "Next".3.Click "Repair your computer."If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Status: 0xc000000fThis is how I understand it as my system is in Polish and Polish is not my first language and with technical language I am not fluent and I beleive thats how I made the mistake in the first place in the BIOS.
View 9 Replies
View Related
May 12, 2012
Windows 7 64 bit Won't Let Me Log On After Computer Name an Description Changed
View 1 Replies
View Related
Jul 19, 2012
I changed the boot drive in the BIOS to a new drive. I thought it worked but when I check Disk Managment in Windows 7 it still shows the old drive as the boot drive. Is there something I have to do in Windows to finalize the change?
View 3 Replies
View Related
Jul 19, 2012
I changed the boot drive in the BIOS to a new drive. I thought it worked but when I check Disk Managment in Windows 7 it still shows the old drive as the boot drive. Is there something I have to do in Windows to finalize the change?
View 1 Replies
View Related
Jan 14, 2012
I am trying to install a password recovery cd on laptop. I changed the order in bios but still not giving option too boot from cd. I even logged in as a guest and put an audio cd in .It didnt give option too play. I think its the cd drive. What can I do?
View 1 Replies
View Related
May 7, 2011
Yesterday I installed some updates on my computer and when I restarted it, it was different. Its resolution was older, like from Window 2001. I cant uninstall anything or use any of the programs that I used to use with Windows 7. I can only use my computer.
View 3 Replies
View Related
Apr 9, 2011
I needed a good backup program so I downloaded a trial of MirrorFolders. I have two identical 750GB drives in my laptop: C (my main drive) and Z (my backup drive). MirrorFolders made an identical copy of C onto Z. That wasn't what I really wanted, because C is partitioned into D and E, and MirrorFolders didn't mirror the other two partitions. The backup methodology wasn't exactly what I was looking for, so I uninstalled the program. After uninstalling MirrorFolders, the machine is now booting to the Z drive, which means I can't format it and try another backup program.
Is there a simple way to restore the boot ability of my C drive? I read a great deal about copying boot folders and such, but I wasn't exactly sure if these were the right answers and I didn't want to screw things up any worse. I figured I could go into the BIOS and disable the Z drive, but no luck. The machine couldn't find a bootable drive, even though C supposedly has the same files as Z.
View 9 Replies
View Related
Dec 19, 2012
Spy hunter was installed and never fully installed. I removed from system but, when I startup the pc i get messeage fdisk cant find dev.sda no medium found.
View 1 Replies
View Related
Dec 14, 2011
I just installed a new motherboard, CPU, memory, and video card into my computer. I'm not looking to salvage my old OS install, and have all important data backed up, so I planned to just put the hardware in and boot off my windows disk to do a format and reload. However no matter what I do I can't get windows setup or an OS to load. When loading the installer it locks up at the windows splash screen. I've tried booting off the hdd and it does the same thing. I tried it in safe mode and it locks up before it finished loading all the files. I also tried booting mini XP off my Hirens 15 disk and that locks up at the splash screen too.
So at this point I ran memtest to see if it was my ram causing problems but it all tested ok. how to boot off my disk so I can format and reload?
View 9 Replies
View Related
Apr 3, 2012
I'm not sure what the trigger was but my C drive where my os is installed apparently took the drive letter of an external drive that I use for backup. It is now the X drive and I cannot boot. I do get the repair screen but cannot repair as there is no operating system to choose. Booting from windows disk makes no difference here.My bios (uefi) can see the disk, I can also see it from the command prompt?
View 4 Replies
View Related
Apr 9, 2011
On my Windows 7 at the bottom left it shows:Test Mode,Windows 7,Build 9780,Also I changed the boot screen but I can't now change it back to the default, I tried using the command prompt but didn't work.
View 1 Replies
View Related
Jan 22, 2013
I recently ran a memtest86 program to check my ram so I had to change my boot priority to get the program to work. Now it seems I cant change it back. I've changed it and saved it but my cdrom still wants to boot up first. I even reset the bios with no luck.
View 9 Replies
View Related
Nov 10, 2009
I have windows XP pro 32 bit installed in C drive and then installed clean win 7 64bit in drive D. Everything works properly but when I boot from XP, it is in C drive and I see Windows 7 in D drive, when I boot from Windows 7, I see win 7 in C and winXP in D drive. Is it normal or is there any I can do to fix win Xp in C and Windows 7 in D?
View 3 Replies
View Related
Aug 23, 2011
Everything was good with my hard drive but now the last time I opened my pc I noticed something really odd. In "My Computer" folder my Local Disk icon had changed. Instead of being an icon that displays a disk, it is an icon that displays something like a crab! What is that?! Is it some kind of virus? How can I change it to the default icon?!
View 1 Replies
View Related
Jan 6, 2012
I have a different sort of problem with grouping.
See, I'm a game modder, and this requires me to have many folders open at once. The problem is, when my computer goes to sleep and then wakes up, the order of my folders on the taskbar is changed. This bugs me to no end, and I'm wondering how I can stop this reordering from happening.
View 2 Replies
View Related
May 7, 2012
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies
View Related
Sep 29, 2012
My Dell laptop with Win 7 home premium crashed and will not boot to the hard drive or system disc. I tried to reinstall Win 7 from the system disc and it apparently did install to a different partition as it now shows two W7 programs on the drive. However when I get to the part where the installation is complete and the program reboots I get only a black screen with a small blinking curser in the upper left of the display. This is exactly what I had prior to reinstalling W7. Shutting down and restarting all I get is the black screen and the curser on the left top. It does not respond to the keyboard or mouse. Win 7 system disc does not give the option to fromat the HD and reinstall. Yes, I did tell the machine to boot to the CD.
View 3 Replies
View Related
Jun 12, 2011
I installed windows 7 onto a 500GB SATA HDD and after the installation completed and the computer restarted, it takes us to a screen that says "Verifying DMI Pool Data...............DISK BOOT FAILURE INSERT SYSTEM DISK AND PRESS ENTER"The funny part is, when we put another HDD in the computer with an installation of windows on it, IN ADDITION to the one in question, it brings us to a dual boot OS selection, letting us select the Windows installation in question, and access without an issueWhy will this installation not simply boot when that HDD is the only one installed?
View 1 Replies
View Related
Sep 17, 2012
I am having an issue with my Windows 7 64 bit laptop. I did an update and pressed the �restart now� to let the changes take effect, when it restarted it got to the �starting windows� screen but it stopped there for a while then flashed a blue screen quickly. Then it restarted itself and goes to a menu that says �windows failed to start. A recent hardware or software change might be the cause�� I have two options � Launch Startup repair (recommended)� or �start windows normally�. When I choose the Launch startup repair it says �windows is loading files� and then it shows a black screen with a mouse cursor, I can move the cursor but nothing loads.
View 3 Replies
View Related
Feb 10, 2012
My computer will come on but will not go into windows
View 2 Replies
View Related
Aug 23, 2012
First off, my computer recently had its motherboard/video card replaced. It is a dell xps l501x. The issues with the colored lines began before the mother board was replaced. Thus, I do not believe a faulty motherboard is the problem.These lines are thin and occur on the top centimeter of the screen. They are made up of many colors and sort of look like squiggles going horizontally across the page. Also my computer will not sleep properly. When the computer is put to sleep the screen will go black, but the fan will continue to run and led backlit keyboard will remain on. They begin immediately after the dell logo comes on. I also get 5 bluegreen dots appear in the top left hand corner of the screen.
The lines do not always appear, its is sort of hit or miss with my computer.I have performed a system restore and and wiped the hard drive. This did not remedy either of the situations. I am not sure how to proceed as it cannot be the motherboard or hard drive.
View 4 Replies
View Related
Sep 11, 2011
I just bought a new ACER laptop, Win 7, around 2 weeks ago. I have only downloaded Minecraft and Microsoft Office on it..... Today I turned on my laptop and it showed the ACER logo, and froze with the loading bar 3/4s full. So I rebooted because I couldnt think of anything better to do.... and same thing, except it froze again, at 1/2 loading bar. So, getting frustrated, I rebooted a 3rd time, and pressed F2 for setup. Once again. Frozen. In resisting the temptation of picking up the laptop and tossing it at the nearest wall, I put in a freshly, properly burnt, Ubuntu LiveCD in. And it didn't even run that.
View 2 Replies
View Related
Apr 11, 2012
Windows 7 just turned off and now it won't boot not even in safe mode. I need a recovery disk or something.
View 9 Replies
View Related
Jun 6, 2010
I cloned my Laptop HDD (120Gb) via Acronis to a 120Gb SSD (Kingston). I checked the SSD after cloning and all the files seem to be there. I replaced the HDD with the SSD and I get a WIndows 7 message Status:0xc000000e and Info: The boot selection failed because a required device is inaccessible.I went to BIOS setup and the Kingston drive was listed as No2 after DVD/CD drive as boot drive. I moved it to No 1 position and tried again. Same result. I googled the issue and others seem to have problems with SSD drive replacements.ANyone got an answer
View 9 Replies
View Related
Jun 24, 2012
Need to do Win 7 install on 50 gb partition and keep my 200+ win 7 install intact but don't want to use it as a boot and dont want to delete it just to get rid of Windows and boot. I want to use it just as a data drive. Dont want to have to activate the new small drive.
View 9 Replies
View Related
May 18, 2011
I have used windows 7 for some time now and am qjuite happy, however.I just recently upgraded to the latest verson and now my HP tablet 64 bit amd turion wont boot.
View 1 Replies
View Related
Sep 28, 2011
I had a system with programs I have installed and the setup and imaged it with acronis or for any matter, it could have been a perfect clone drive copy because the program isnt the issue. My i5 - 2500k achi windows 7 was imaged to a new hard drive and attempted to run on a AMD Phenom 4x 9500.Now before you go telling me about the three hard drive modes, Raid , IDE and ACHI. I've edited the registry and have tested all three modes to correspond with the motherboard bios setting of the drive. I assume its IDE or ACHI, which I've tried loading windows on the orginal machine, editing the registry settings, then trying it again on another machine.Where I am at now is it goes to classpnp.sys when im watching safe mode and stalls there. Im noticing before it was stalling at disk.sys but i think i fixed that via the registry settings for the hard drive mode.Tried to make a generalized image by using sysprep got the error fatal error because i guess its used more than three times, dont understand what disarm command they are talking about for workaround since the xml file doesnt exist.
I have tried ACRONIS 2011 Image with Universal Settings mode (that is supposed to remove hard ware specific settings)I have also tried using the windows disc, going into launchup repair, repair startup.I also went recovery console, then tried renaming classpnp.sys to classpnp.old.I tried several options using the Ultimate Boot disk but its not the boot up mbr as it boots up , its the loading of one of the system files/drivers that make it fail.The reason why im trying to just clone one hard drive and put it on another system is because, everything is installed, the programs, etc. Its saving me god bloody 2 days with setting up the programs, although Im getting close to over a day trying to figure out whats the big dela with getting this to work on another computer.additional information : I do not need any user specific preferences, documents, files or settings, everything can go, i just want this installation with about 25 gig of programs, to load and work.If you know of a program thats fairly easy to use considering im already one day into doing this, then let me know and tell me what im looking to do and some instructions are great.Either way, im waiting for an answer, will be here next 3 hours.im on skype as well, this user name is spelt backwards for security reasons.
View 11 Replies
View Related
