Computer Won't Boot To Windows 7 With SSD Drive?
Jun 6, 2010
I cloned my Laptop HDD (120Gb) via Acronis to a 120Gb SSD (Kingston). I checked the SSD after cloning and all the files seem to be there. I replaced the HDD with the SSD and I get a WIndows 7 message Status:0xc000000e and Info: The boot selection failed because a required device is inaccessible.I went to BIOS setup and the Kingston drive was listed as No2 after DVD/CD drive as boot drive. I moved it to No 1 position and tried again. Same result. I googled the issue and others seem to have problems with SSD drive replacements.ANyone got an answer
View 9 Replies
ADVERTISEMENT
Oct 21, 2012
I cloned my Laptop HDD (120Gb) via Acronis to a 120Gb SSD (Kingston). I checked the SSD after cloning and all the files seem to be there. I replaced the HDD with the SSD and I get a WIndows 7 message Status:0xc000000e and Info: The boot selection failed because a required device is inaccessible.
I went to BIOS setup and the Kingston drive was listed as No2 after DVD/CD drive as boot drive. I moved it to No 1 position and tried again. Same result. I googled the issue and others seem to have problems with SSD drive replacements.
View 3 Replies
View Related
Feb 3, 2013
I currently do not have any internal optical drive, but I do have a USB optical drive instead. Would it be possible to boot up Windows 7 from the external drive in the UEFI Bios? This is for a new computer without a formatted hard drive, if it helps.
View 4 Replies
View Related
Mar 7, 2011
Can I boot my Windows 7 or XP PC into a USB mode where the computer can be used simply as an external USB drive? Mac has this feature and it can be very convenient for large file transfers.how do I connect two PC to swap the files. Win 7 to XP?
View 5 Replies
View Related
Dec 7, 2011
I took out my Windows 7 boot drive and put it inside of a USB enclosure and when I try and go to my profile, I can't open Users folder on other computer. I don't have an administrator account on this other computer. Is there any way to open up the folder? It just says access denied when I try and open it up on a windows xp computer with no ADMIN privileges (I can't get admin on this computer).
On a XP computer that has admin it opens fine. I figured since I actually wasn't using the OS that was on the drive I wouldn't have any trouble reading any folders on it (but I guess that because it's NTFS there are more security measures, unlike FAT32 which would let anybody read anything). Would I just need to open up the folder on a computer with admin and then copy the things over while I still have admin.
View 4 Replies
View Related
Mar 18, 2011
I am trying to run memtest on a new build and for some reason, the machine will not boot from the disc drive. I'm positive that it CAN boot from the disc drive because I just installed windows 7x64 on it last night. I have already configured the BIOS to boot from CDROM as it's first choice and selected to boot from CDROM thru the boot menu. I am 100% positive that this memtest disc is good because I just successfully ran it on my main machine with no problems.
ps. to power the disc drive I am using a 4-pin molex to SATA adapter since my PSU only has 2 SATA pwr connectors and they are being used to power my 2 HDD's. I don't know if this has to do with it...could it be a bad adapter not powering the drive at initial startup? Bear in mind that the drive works fine once I'm in the OS.
View 5 Replies
View Related
Feb 14, 2012
Son changed C: drive to Z: Not cannot get computer to boot to proper drive, nor can I figure how how to rename drive back to C: How can this be done? Cannot access any of my files, etc., and (of course) Windows 7 installation disk does not work.
View 3 Replies
View Related
Mar 19, 2012
I decided to built a new custom made computer and would like to know if I can just attached the old sata hard drive to the new motherboard?I read that I have to have the same motherboard for the hard drive to work or else it will reformat the hard drive, is this true?
View 2 Replies
View Related
Jul 4, 2012
I am wondering if there is a way for me to set up my computer in the following manner:
C: <- Main Boot Drive (60GB SSD)
D: <- Copy of Boot Drive (60GB SSD)
E: <- Program Drive (1TB HDD)
F: <- Storage Drive (2TB HDD)
G: <- Download Drive (500GB)
I have done the separate program and storage drive before, but I was wondering if perhaps a way to back up my boot drive without necessarily raid. It was brought to my attention that if something were to go wrong with the data then raid would automatically copy it (which makes sense), or am I worrying to much?
View 2 Replies
View Related
Jul 14, 2012
I recently replaced my boot drive and just got everythign up and running. I had removed my backup drive while I replaced the boot drive so that I could us it on another computer.
Now when I add the 2nd hard drive back to my computer I get a message saying something like "can not load os" right after the bios screen comes up and before Windows begins to load. If I unplug the second drive the computer will boot just fine.
If I access the boot menu and select my boot drive the computer will boot and my second drive will work just fine. I do not have to enter the boot menu and select the boot drive on every startup?
View 1 Replies
View Related
May 13, 2012
gateway computer has black screen won't boot fan, drives run have az4000 serie
View 3 Replies
View Related
Dec 30, 2012
i have been on various forums for advice but unable to solve - this is the problem -
* it turns on & I CAN get into advanced menus
* it will not repair itself no matter what
* it will not go into any other modes , safe Etc....therefore I cannot restore to factory settings etc....
* ive Tried all tricks such as F8, Alt & F11 etc..... to get into advanced menu settings - all lead to the black screen
* everything i click on enter leads to a black screen - only a white curser appears.
its as if there is no way of accessing the computer disc/ hard drive in anyway from boot up. there is clearly a hardware problem but i cannot access anything internal beyond ordinary & advanced menus i just keep being led to the black screen & no activity. the menus work & that is all. i run Windows 7 on a Dell inspiron 1564.
View 9 Replies
View Related
Aug 29, 2012
Using Windows 7 Ultimate 64-bit. W/ASUS P7P55D Deluxe board. Very stable and non buggy. Computer was running great with multiple drives. I substituted one of my 1TB drives with a brand new Seagate 3 TB drive. With the new drive hooked up, the computer will not boot and gives a message that there is no hard drive detected, put media in and hit the key. (something to that effect).
If I enter the bios in the condition, it shows all the drives in their correct order and the boot sequence is the first hard drive, CD, etc. It has detected the new drive as drive #3. But it will not boot. But, if I disconnect the new drive (power and SATA connector), the compute will boot up fine. I have checked all the connectors ad they seem fine. Is there something about the sequence in which the SATA connectors have to be connected?
View 1 Replies
View Related
Feb 26, 2012
ive swapped my hard drive to another computer and its coming up with boot failure, please insert disk and press enter. ive changed bios boot settings and everything but its still coming up with this message
View 6 Replies
View Related
Mar 28, 2012
my desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
View 2 Replies
View Related
Jul 24, 2010
2 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Nvidia Boot Agent 229.0525
Copyright 2001-2005 Nvidia Corp
Copyright 1997-2000 Intel Corp
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled
PXE-M0F: Exiting Nvidia Boot Agent
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
This is my current set up:
Shuttle XPC SN27P2 (Barebone) Comes with motherboard, PSU, and case.
AMD Athlon 64 X2 5200+ @2.6GHz 65W
PNY XLR8 GTS 250
OCZ Reaper Memory 4GB PC-6400 DDR2-800
WD 74GB Raptor
WD 640GB Internal
WD 2.0TB Internal
WD 1.5TB External
WD 400GB External
Cavalry 1.0TB External
Shuttle 450 Watt PSU
Logitech G15 + MX518 + FuncPad 1030 Blk on Blk
Sony Optirac 18x DVD-/+RW drive
Dual Samsung SyncMaster 225BW 22" LCD Wide Screen Monitors
So how can I get windows to boot up with out having the boot disk in the cd drive...It worked the very first time I installed windows 7 on my PC...
View 6 Replies
View Related
May 7, 2012
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies
View Related
May 29, 2012
My HP laptop HD crashed, am trying to replace it with a Kingston HyperX 120GB SSD. I do not have Windows installation disks, only have Windows Recovery Disks. All installation instructions I have found for SSD's is for cloning, which I cannot do since the HD is deadI have installed the SSD, booted into BIOS, this simple BIOS version doesn't allow me to change anything on the HD, but it does recognize it and let me do a HD test, so it does recognize the SSD. I then put the Windows Recovery disk in the CD drive, attempted to boot up, but the CD drive just spins and spins but never boots up. I thought the CD drive might be bad, so I tried an external USB CD drive with the Recovery disk, but it does the same (just spins). I even got a new Windows 7 installation disk (from another PC) to see if it will boot from it, but get nothing but a spinning CD I have not done anything yet to the HyperX SSD, haved not formatted or partitioned it.I thought this would be done by Recovery on the OS installationThe BIOS is set up to first boot from the CD drive, so the boot order is not the issue.
View 4 Replies
View Related
Jul 10, 2012
I recently built my computer and installed a ssd and a hdd, the OS is on the ssd which is the c drive but since it is smaller than the hdd I tried to change the letters around and make the hdd the c drive using regedit because the default install location seems to be the c drive and after restarting the computer it boots up and says preparing your desktop then goes to a blue screen with just the cursor. I tried booting in safe mode and all I get there is a black screen also
View 9 Replies
View Related
Jan 25, 2012
Check my Hardware specs for full information
Current setup:
C: Boot, Corsair SSD
D: Files, samsung HDD
D:/boot files/user/(all user account directories moved here, when possible) I'm wondering if it's possible to install games such as Assasins' Creed or Skrym, but install all game data to this folder?D:/boot files/programs/* Many installers allow you to define a custom installation path, But I am unsure if these games would ask for one or force me to install to the default directory?
View 9 Replies
View Related
Sep 30, 2012
I have a 1T SATA system drive and a 1T SATA working drive. I installed a 3T SATA storage drive, and now my system won't boot from the C:. I have to go into the BIOS and boot from there, or use a boot disk. How do I get the system to boot from C: again?
View 3 Replies
View Related
Mar 23, 2012
I have a partition question and after scouring the Web, can't find anyone with the exact same situation as mine. Basically what I'm wondering is if I can delete a primary partition and then extend another, non primary into that space.
Here's what I have and why I want to do this: my laptop came from the factory with one 500GB SATA drive, split into two partitions (C, primary, and D, logical, each 250GB). The Win7 install was on the C drive. Recently, I installed a 120GB SSD as a second drive, and using the tools with it, copied the contents of my existing C partition to the new SSD, and then made the SSD the boot drive labeled as the C drive. So far so good, everything works fine.
Now, what I'm left with is this: C: 120GB (SSD, now the boot drive with the Win7 install) D: 250GB (SATA, the original D partition, Disk Management IDs it as a logical drive, extended partition) E: 250GB (SATA, the original C partition, Disk Management IDs it as a primary partition)
So, I have the original "C drive" on E now... it's no longer the system/boot drive. Obviously I don't need the files on it as they are all on the new SSD. What I want to do is to delete all those files and then combine what's on D and E into one 500GB D drive as I have no reason to have the two partitions. Is it possible to just delete the E partition and then extend the D partition into the unallocated space? I'm confused because it seems as though the D partition may rely on the E partition being there since the E drive IDs as primary. Or would the D partition become primary?
I know I could just back up the D partition to an external drive, delete both D and E partitions, and reformat as one new D and restore the files, but I don't want to create more work for myself if I don't have to. Obviously I don't want to mess up the files on the D drive though, which is why I'm asking.
View 6 Replies
View Related
Jan 10, 2013
How can I move programs and files from my ssd boot drive to my data drive (Windows 7 x64 PC)?
View 3 Replies
View Related
Apr 26, 2009
ok so im having a weird problem thats probably very easy to fix.
background info: before my Windows 7 install i had 3 partitions
vista 64
xp 32
empty (soon to be linux)
when i downloaded the newest win 7 build i deleted my xp 32 partition and installed Windows 7 on that partition. because Windows 7 creates that "reserve partition" or what ever, it extended my EMPTY partition with my vista partion. which cause it to become a "logical drive" rather than a "boot" drive. aka i cannot figure out how to access my vista OS.. rather annoying since im just toying with Windows 7 atm.
View 9 Replies
View Related
Nov 26, 2009
For some odd reason, after doing some changes to my partitions in Windows 7 and restarting my computer, I got the ol' "BOOTMGR is missing" message. I have the Windows 7 Repair Disc image file and a 4GB USB Flash Drive, but, sadly, no CDs. Is there any way that I can put the image file onto my USB Flash Drive and boot from it with my Acer Aspire X1200 desktop computer?
View 1 Replies
View Related
Jan 4, 2012
I'm fixing my sisters computer, It froze on her, when she tried to start it up again it went into some sort of system repair mode and after about 20hrs of this (no joke) it gave me the option to restore the computer to factory settings, it also gave me the option to install some sort of backup on the hard drive, however i tried this and it said there was no room on the hard drive (if i didn't know any better I'd say the problem was with the hard drive) i went ahead with the system recovery as it seemed to be the only way to fix the computer (i know i sound like an oaf) now the computer is showing me a screen which states that i need to insert my windows installation disc, however the laptop has no disc drive!
Additional information
HP Pavilion dm1-4004sa
AMD Dual-Core E-450 processor
4GB memory
320GB Hard Drive
View 4 Replies
View Related
Sep 18, 2012
How can the contents of a hard drive from an old computer be transferred to new computer when hard drive is out of the old computer?
View 3 Replies
View Related
Mar 26, 2012
The computer I'm having a problem on is a HP G6- 635 DX Windows 7 x64. About a week ago I decided to disable a few startup items because my computer took too long to load up. I think I disabled something that I shouldnt have because the next time I restarted I had gotten stuck on the "Starting Windows" screen.After I couldnt fix that problem I decided to just use the System Recovery option, so I popped out my hard drive and put it into an HDD enclosure and backed up my music/video files onto my other computer (Windows Vista Home Premium). When I plugged my hard drive back into the laptop I got the "bootmgr is missing" screen. I've tried all the command prompt steps to try and fix the bootmgr, they arent working but I think thats because my computer is automatically booting from the C: drive (which has no files in it and is about 200mb in size), and my D: drive is 285 gb and has all of the folders that used to be in the C: drive (Program Files, Users, Windows etc). Theres also another drive titled "Recovery" with the size of 13 gb
View 9 Replies
View Related
Mar 26, 2012
The computer I'm having a problem on is a HP G6- 635 DX Windows 7 x64. About a week ago I decided to disable a few startup items because my computer took too long to load up. I think I disabled something that I shouldnt have because the next time I restarted I had gotten stuck on the "Starting Windows" screen. After I couldnt fix that problem I decided to just use the System Recovery option, so I popped out my hard drive and put it into an HDD enclosure and backed up my music/video files onto my other computer (Windows Vista Home Premium). When I plugged my hard drive back into the laptop I got the "bootmgr is missing" screen.
I've tried all the command prompt steps to try and fix the bootmgr, they arent working but I think thats because my computer is automatically booting from the C: drive (which has no files in it and is about 200mb in size), and my D: drive is 285 gb and has all of the folders that used to be in the C: drive (Program Files, Users, Windows etc). Theres also another drive titled "Recovery" with the size of 13 gb.Also whenever I try to do System Recovery it gets stuck at 88%. I have Easeus Partition Manager bootable by CD & an HDD enclosure, thats how I am able to see the files.So basically what I;m asking is, is there a way that I can get my computer to boot from the D: drive OR what files should I move from the D: to C: drive that will make my computer boot and finish the System Recovery?
View 9 Replies
View Related
Jul 25, 2009
I deleted my existing OS then created two new partitions on the same drive. Then I installed Vista on one partition and that partition was properly named "c" as ususal. Then I started Windows 7 setup.exe from a different hard drive and let Windows 7 install itself into its own partition. When I got to "My Computer" the Windows 7 partition was labelled as "I" instead of the expected "C" which had never happend before when I did the same thing.
Does anyone know a save way to label the Win 7 drive as "C" while in Windows 7?
View 9 Replies
View Related
Sep 29, 2012
My Dell laptop with Win 7 home premium crashed and will not boot to the hard drive or system disc. I tried to reinstall Win 7 from the system disc and it apparently did install to a different partition as it now shows two W7 programs on the drive. However when I get to the part where the installation is complete and the program reboots I get only a black screen with a small blinking curser in the upper left of the display. This is exactly what I had prior to reinstalling W7. Shutting down and restarting all I get is the black screen and the curser on the left top. It does not respond to the keyboard or mouse. Win 7 system disc does not give the option to fromat the HD and reinstall. Yes, I did tell the machine to boot to the CD.
View 3 Replies
View Related
