I am trying to run memtest on a new build and for some reason, the machine will not boot from the disc drive. I'm positive that it CAN boot from the disc drive because I just installed windows 7x64 on it last night. I have already configured the BIOS to boot from CDROM as it's first choice and selected to boot from CDROM thru the boot menu. I am 100% positive that this memtest disc is good because I just successfully ran it on my main machine with no problems.
ps. to power the disc drive I am using a 4-pin molex to SATA adapter since my PSU only has 2 SATA pwr connectors and they are being used to power my 2 HDD's. I don't know if this has to do with it...could it be a bad adapter not powering the drive at initial startup? Bear in mind that the drive works fine once I'm in the OS.
i have been on various forums for advice but unable to solve - this is the problem -
* it turns on & I CAN get into advanced menus * it will not repair itself no matter what * it will not go into any other modes , safe Etc....therefore I cannot restore to factory settings etc.... * ive Tried all tricks such as F8, Alt & F11 etc..... to get into advanced menu settings - all lead to the black screen * everything i click on enter leads to a black screen - only a white curser appears.
its as if there is no way of accessing the computer disc/ hard drive in anyway from boot up. there is clearly a hardware problem but i cannot access anything internal beyond ordinary & advanced menus i just keep being led to the black screen & no activity. the menus work & that is all. i run Windows 7 on a Dell inspiron 1564.
So I have an bit of an odd and I think unique problem (as many searches came up with no solutions). Simply put, my boot manager is missing, but only when my windows install disc is not in the disc drive. It started several months ago and I just left it be, let the disc it int he disc drive and it was not that big of a deal. But just did a clean install couple days ago I re-installed windows 7 ultimate 64-bit on my computer (using an upgrade disc if that makes a difference).I formatted the drive with what I guess is a quick format (the option the install disc gives you). I have tried doing a repair with the install disc but no problems are found every time I try.
I have a laptop that will not boot up, It comes up with windows error recovery, and gives the option to launch startup repair. When I select startup repair, it shows a screen that says it is loading files, but then it only loads a black screen with the arrow. I tried booting from a recovery disc made on another windows 7 computer, same results. It will not boot past the black screen. What else can I do? It does not give me the option to boot in safe mode, and the laptop did not come with a windows 7 os disc.
I have two HD drives, one SATA and one IDE, plus one SATA CD/DVD drive. Firstly I used to have XP on the SATA and Windows 7 on the IDE, but the IDE drive is smaller and slower and I wanted to essentially swap them over. The boot devices are set in the bios as CD/DVD first, SATA second, IDE third.
So I have installed XP first on the IDE and now Windows 7 on the SATA, but after I removed the Windows 7 DVD and restarted it is refusing to boot saying NO BOOT DEVICE DETECTED, INSERT SYSTEM DISK. Now if I place the Windows 7 dvd in the drive and ignore the PRESS ANY KEY TO BOOT FROM CD/DVD...., it will book fine.
This will surely fustrate non-technical users no end and some may not even think to try and replace the OS disk and try again. I think I know what has happened, but more importantly how do I go and fix it to just boot without needing a damn boot disk everytime!?
I have a hp G71-449WM Notebook running Windows7 premium 64bit. I can't boot computer the repair disc I have doesn't seem to work. I have no installation disc to fall back on and I can not seem to get it to boot in safe mode. Right now its asking me to find the needed driver in the driver folders. Unless it's called something else I do not see a bootmgr driver. Right now its asking me to connect to the network which would be cool but i don't know what folder they where asking me to type in.
My Acer netbook has developed some kind of fault and I am unsure as to what I ought to do. The netbook does boot to BIOS and also will boot up from an external drive...but will not boot normally. I am thinking of replacing the hard drive but don't know if there could be something else wrong. It says sometimes that it can't read it and from this I am not sure if there is something else wrong. If I change the drive does it sound as though things will work? There are also a couple of other intermittent faults such as certain letters and numbers not working and then everything is fine for a while...
Is there a way I can remove all the partitions from my Hard drive and do a full format (not quick)? The windows 7 install disc does a quick format but I would like to clean it thoroughly. Is there a utility I can use at boot time to do this?
I have a toshiba satellite L750 running Windows 7 home premium, when trying to burn anything onto a blank disc I get as far as selecting my items and asking it to burn but it keeps telling me to insert a blank disc (which obviously I have). I have tried several different types of blank disc but it dosnt seem to recognise any of them.
I cloned my Laptop HDD (120Gb) via Acronis to a 120Gb SSD (Kingston). I checked the SSD after cloning and all the files seem to be there. I replaced the HDD with the SSD and I get a WIndows 7 message Status:0xc000000e and Info: The boot selection failed because a required device is inaccessible.I went to BIOS setup and the Kingston drive was listed as No2 after DVD/CD drive as boot drive. I moved it to No 1 position and tried again. Same result. I googled the issue and others seem to have problems with SSD drive replacements.ANyone got an answer
Son changed C: drive to Z: Not cannot get computer to boot to proper drive, nor can I figure how how to rename drive back to C: How can this be done? Cannot access any of my files, etc., and (of course) Windows 7 installation disk does not work.
I cloned my Laptop HDD (120Gb) via Acronis to a 120Gb SSD (Kingston). I checked the SSD after cloning and all the files seem to be there. I replaced the HDD with the SSD and I get a WIndows 7 message Status:0xc000000e and Info: The boot selection failed because a required device is inaccessible.
I went to BIOS setup and the Kingston drive was listed as No2 after DVD/CD drive as boot drive. I moved it to No 1 position and tried again. Same result. I googled the issue and others seem to have problems with SSD drive replacements.
I decided to built a new custom made computer and would like to know if I can just attached the old sata hard drive to the new motherboard?I read that I have to have the same motherboard for the hard drive to work or else it will reformat the hard drive, is this true?
I have done the separate program and storage drive before, but I was wondering if perhaps a way to back up my boot drive without necessarily raid. It was brought to my attention that if something were to go wrong with the data then raid would automatically copy it (which makes sense), or am I worrying to much?
I recently replaced my boot drive and just got everythign up and running. I had removed my backup drive while I replaced the boot drive so that I could us it on another computer.
Now when I add the 2nd hard drive back to my computer I get a message saying something like "can not load os" right after the bios screen comes up and before Windows begins to load. If I unplug the second drive the computer will boot just fine.
If I access the boot menu and select my boot drive the computer will boot and my second drive will work just fine. I do not have to enter the boot menu and select the boot drive on every startup?
Using Windows 7 Ultimate 64-bit. W/ASUS P7P55D Deluxe board. Very stable and non buggy. Computer was running great with multiple drives. I substituted one of my 1TB drives with a brand new Seagate 3 TB drive. With the new drive hooked up, the computer will not boot and gives a message that there is no hard drive detected, put media in and hit the key. (something to that effect).
If I enter the bios in the condition, it shows all the drives in their correct order and the boot sequence is the first hard drive, CD, etc. It has detected the new drive as drive #3. But it will not boot. But, if I disconnect the new drive (power and SATA connector), the compute will boot up fine. I have checked all the connectors ad they seem fine. Is there something about the sequence in which the SATA connectors have to be connected?
I currently do not have any internal optical drive, but I do have a USB optical drive instead. Would it be possible to boot up Windows 7 from the external drive in the UEFI Bios? This is for a new computer without a formatted hard drive, if it helps.
Can I boot my Windows 7 or XP PC into a USB mode where the computer can be used simply as an external USB drive? Mac has this feature and it can be very convenient for large file transfers.how do I connect two PC to swap the files. Win 7 to XP?
ive swapped my hard drive to another computer and its coming up with boot failure, please insert disk and press enter. ive changed bios boot settings and everything but its still coming up with this message
I know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
I took out my Windows 7 boot drive and put it inside of a USB enclosure and when I try and go to my profile, I can't open Users folder on other computer. I don't have an administrator account on this other computer. Is there any way to open up the folder? It just says access denied when I try and open it up on a windows xp computer with no ADMIN privileges (I can't get admin on this computer).
On a XP computer that has admin it opens fine. I figured since I actually wasn't using the OS that was on the drive I wouldn't have any trouble reading any folders on it (but I guess that because it's NTFS there are more security measures, unlike FAT32 which would let anybody read anything). Would I just need to open up the folder on a computer with admin and then copy the things over while I still have admin.
my desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
I recently rebuilt a computer that had a P4 3.2 Ghz, 2 Gb ram, and windows XP. I put in an asus p5n-e sli motherboard, 6 Gb of ram, and an intel celeron E 3200 2.4 Ghz dual core. The computer is my parents, and the new parts are from my computer that I just upgraded. After I installed the new parts, windows would not start, nor would it boot to a disc to attempt repair. I put the hard drive into my computer to get the files that I needed off of it, then wiped the hard drive with it installed in my computer. I put the freshly wiped drive into the other computer in which I would receive "boot mgr not found ctrl + alt+ del to restart" I then tried to install a fresh copy of windows 7 thinking that boot mgr is part of windows. I tried to boot to the install cd, it loads the files, but then just sits at the starting windows screen and does nothing. I put the hard drive back into my computer and installed windows 7 on it from there, then put it back into the other computer. I still am getting the "boot mgr not found" message and it will not boot to windows. It still will not boot to any disc, even a windows repair disc did not work. If i put the drive into my computer, it will boot just fine
Sorry if this question has been answered before but I downloaded Win 7 x86 from my school website and saved it on a clear partition. I am trying to burn a disc but I am new to this. I read I might need power iso to extract files? I burned a disc but I guess i did not specify boot and it did not work. I have a 2gig file ( Win 7) downloaded on my hard drive and I am lost.
I have a few corrupted system files, so I tried booting the precompiled rescue disc from neowin as well as my Windows 7 disc. When I try to boot form the disc it says Windows is loading, then gives me an error 0x000000d. Can some one tell me whats wrong here?
I'm new to Win 7 and I have a question, that may seem a bit stupid to the most of you... I bought my first laptop (Acer Aspire 5738G) and it came with Win 7 x64 Home Premium installed on it, but I got no DVD! What do I have to do in order to be able to reinstall 7 at anytime?!
