Sorry if this question has been answered before but I downloaded Win 7 x86 from my school website and saved it on a clear partition. I am trying to burn a disc but I am new to this. I read I might need power iso to extract files? I burned a disc but I guess i did not specify boot and it did not work. I have a 2gig file ( Win 7) downloaded on my hard drive and I am lost.
View 7 RepliesSo I have an bit of an odd and I think unique problem (as many searches came up with no solutions). Simply put, my boot manager is missing, but only when my windows install disc is not in the disc drive. It started several months ago and I just left it be, let the disc it int he disc drive and it was not that big of a deal. But just did a clean install couple days ago I re-installed windows 7 ultimate 64-bit on my computer (using an upgrade disc if that makes a difference).I formatted the drive with what I guess is a quick format (the option the install disc gives you). I have tried doing a repair with the install disc but no problems are found every time I try.
View 1 Replies View RelatedI recently rebuilt a computer that had a P4 3.2 Ghz, 2 Gb ram, and windows XP. I put in an asus p5n-e sli motherboard, 6 Gb of ram, and an intel celeron E 3200 2.4 Ghz dual core. The computer is my parents, and the new parts are from my computer that I just upgraded. After I installed the new parts, windows would not start, nor would it boot to a disc to attempt repair. I put the hard drive into my computer to get the files that I needed off of it, then wiped the hard drive with it installed in my computer. I put the freshly wiped drive into the other computer in which I would receive "boot mgr not found ctrl + alt+ del to restart" I then tried to install a fresh copy of windows 7 thinking that boot mgr is part of windows. I tried to boot to the install cd, it loads the files, but then just sits at the starting windows screen and does nothing. I put the hard drive back into my computer and installed windows 7 on it from there, then put it back into the other computer. I still am getting the "boot mgr not found" message and it will not boot to windows. It still will not boot to any disc, even a windows repair disc did not work. If i put the drive into my computer, it will boot just fine
View 5 Replies View RelatedI have a few corrupted system files, so I tried booting the precompiled rescue disc from neowin as well as my Windows 7 disc. When I try to boot form the disc it says Windows is loading, then gives me an error 0x000000d. Can some one tell me whats wrong here?
View 2 Replies View Relatedany suggestions how to make working install if the iso is on USB flash drive? Is it somehow possible?
I am sorry but I am quite lame in that area. I have never booted from USB flash drive. Where in BIOS I can set Boot from USB?
I've 2 dvd rewriters in my pc. Both Pioneer, one oldish and one older. The both work within windows. When I select multi-boot options to run a boot disc they are both displayed to choose from. However, if I select one of them, the disc boots. If I select the other one, the command to boot is ignored and the system boots into windows - obviously ignoring the dvd device. It's the newer one which is the problem. They both used to work ok with a boot disc.
View 3 Replies View RelatedThe disc I had received complementary is unfortunately, broken. Can I create a system boot disc? so that I can format my computer when my heart desires.
View 2 Replies View RelatedI have a laptop that will not boot up, It comes up with windows error recovery, and gives the option to launch startup repair. When I select startup repair, it shows a screen that says it is loading files, but then it only loads a black screen with the arrow. I tried booting from a recovery disc made on another windows 7 computer, same results. It will not boot past the black screen. What else can I do? It does not give me the option to boot in safe mode, and the laptop did not come with a windows 7 os disc.
View 9 Replies View RelatedI am trying to run memtest on a new build and for some reason, the machine will not boot from the disc drive. I'm positive that it CAN boot from the disc drive because I just installed windows 7x64 on it last night. I have already configured the BIOS to boot from CDROM as it's first choice and selected to boot from CDROM thru the boot menu. I am 100% positive that this memtest disc is good because I just successfully ran it on my main machine with no problems.
ps. to power the disc drive I am using a 4-pin molex to SATA adapter since my PSU only has 2 SATA pwr connectors and they are being used to power my 2 HDD's. I don't know if this has to do with it...could it be a bad adapter not powering the drive at initial startup? Bear in mind that the drive works fine once I'm in the OS.
When I try to turn on my comp. I get a message saying boot disc failureinsert system disc and press enter.If I switch off and try again it usually works o.k.occassionally I have to try several times. What is wrong, and how do I fix it. Also, is it on the brink of complete failure?
View 9 Replies View RelatedSo originally when I bought my Laptop it was Windows Vista. A while ago I upgraded to Windows 7 by downloading the OS and a valid serial key form a third party distributor associated with my school. Next week I`m putting together a new desktop PC, and want to install Windows 7 on it. I have another valid serial key to use for the registration, however do not have a boot disc to use. Wil the System Restore Disc that I can create using the wizard on Win 7 be able to boot and load a new OS on my new desktop or will i have to create a boot disc another way.Also, I still have the original installation files saved in My Downloads, although not in .iso format but expanded and just saved as files.
View 1 Replies View Relatedthe latest rtm extract did not come as an iso. Now there is a boot folder, but I can't create the correct boot disc at all.....
Everytime I burn the disc it just doesn't want to boot to it, it just bypasses it. So I can't get a clean install going.... I am running nero 9, any help would be greatly appreciated. I am not that skilled at making boot discs, detailed instructions would be great.
Okay so I have searched online for how to create a Windows 7 Boot Disc, but to no avail. I have blank dvds, I have a legit operating system, and I have an activation code. I have no idea where to go from here and find boot files or installation files or create ISOs etc.
View 2 Replies View RelatedI recently downloaded a copy of Windows 7 Professional 64 bit through MSDN, burned the iso to a dvd using ImgBurn (Auto write speed) and then attempted to boot the disc.
The computer tries to load the files off the disc, and then this error pops up:
Windows failed to start. A recent hardware or software change might be the cause.
File: windowsystem32ootwinload.exe
status: 0xc0000001
info: The selected entry could not be loaded because the application is missing or corrupt.
I checked the file location, and the file was there. I decided to do a factory image restore (probably stupid of me) since I had already backed up all my files and was planning on doing a clean install of 7 anyway.
I then tried the boot again, but got the same error, even though I was under the impression that factory restore would fix any corrupted system files. Since, for all intents and purposes, my computer is "new", and there's nothing on it now except for what came with it, I'm at a loss as to what could be causing the problem.
I have a Dell Inspiron 1720, running Vista 32 bit Home Premium. Intel Core Duo processor, 2.4 GHz.
I screwed up and ordered Windows 7 Pro before I realized I couldn't do an upgrade from Vista Home Premium. I really don't want to resintall all my programs. So I'm thinking about installing a new drive, and doing a dual boot setup with Windows 7 on the new "D" drive. Question is, can I do this with an upgrade version of Windows 7, or do I need the full version?
View 8 Replies View RelatedI just created a system repair disc by clicking "Create a system repair disc" on my computer. The disc was successfully created, then I went to boot it up in VirtualBox and I get a Toshiba error: F3-F100-0003. How could this be? I don't think VirtualBox or the repair disc would have anything to do with Toshiba. I created this disc with a factory preinstallation of Windows 7 on a Toshiba laptop. Did Toshiba put a custom disc image on the computer which will be burned to the disc? Does VirtualBox use the host computers BIOS? (maybe not possible because there was a Windows 7 cursor in front of the error box) Does Microsoft use Toshiba technology in their repair discs?
View 3 Replies View RelatedCan't get past the windows did not shut down properly window where you do the rcommended rpair. It does not do anything but try to rpair.
View 1 Replies View RelatedI just got a new battery for my computer, because the old one died. When the old one died, it messed up the files on the hard drive. I used a windows xp pro installation disc to wipe the hard drive (or delete the partition), then set it as slave with another hard drive as master. Both hard drives are were wiped clean, nothing on them, and now the computer is actually running pretty fast. So, I tried to run the Windows 7 installation cd to install Windows 7 (Nyaha! Redundency!) to the new primary drive. Here's the problem. It won't boot the disc. I went to the BIOS and set it to boot the CD/ROM first, second, and last. It still won't boot the Windows 7 CD. Now, I have 3 CDs for Windows 7, my family has three different computers. I tried the 64 bit one, and the two 32 bit one's, but it will. Not. Work. It just does not boot any of them. It says "Boot Failure from Previous Device.
View 3 Replies View RelatedI have recently reinstalled 7 on a new disk so i can keep the boot free of clutter. Now i want to wipe the old disc so i can fill it with said clutter. Problem is Disk manager seems to recognise it as system and will not give me the option to format.
View 4 Replies View RelatedMy desktop computer wont start because it says BOOTMGR is compressed how do i fix this? It also won't boot my recovery disc i dont know what to do. I burn the recovery disc to a cd and the recovery disc will not boot.
View 1 Replies View Relatedis it possible to make a Windows 7 boot disc from scratch? By scratch I mean, I want all the programs I currently have installed on my PC and some items in my secondary drives to be there too, in other words, can I take my current Windows AND the programs/items I have on my drives, and put them together as one installation, so that when I format my computer and reinstall Windows, my basic programs, like Photoshop, After Effects, etc, are still there, so there is no worry about downloading it? That's my main point, I have to install Windows 7 and the programs I have in like 30 computers, it would take forever if I ALSO have to download programs like Photoshop, I don't have the best internet in town anyways.
View 5 Replies View RelatedI am trying to perform a clean/custom install of Windows 7 Professional 32-bit on my VAIO SZ-650N. I have the upgrade disc and though its primary purpose is to upgrade from Vista to Windows 7, it is confirmed to work with clean installs as well. Since I want to perform a clean install, I must boot the installation from the disc and not within the OS. The problem is that when I insert the disc into the drive and start up the computer, it'll pause for a moment longer than usual, as if it detects that the CD is there, like I can hear the disc spinning in the drive, and this little gray underscore will blink on the screen, but it will never give me the "Press any key to boot from CD" message and it'll eventually just load up my OS.The disc is in perfect condition and I can view its contents and run it from within the operating system...I just can't boot from it. Even the directions for clean/custom installs that come with this disc say that it must be done from the disc, not when the OS is loaded. The problem can't possibly be my BIOS startup order, because first of all the disc drive is selected to load first thing and when I insert other bootable CD's such as my beta copy of Windows 7, I can boot from it fine.
Edit: It will not let me do a custom install from within the OS regardless because it is unable to detect any drives/partitions to install Windows 7 onto. And the "advanced" option isn't there...I'm guessing because it's impossible to wipe the drive clean when the OS is already loaded.
I have two HD drives, one SATA and one IDE, plus one SATA CD/DVD drive. Firstly I used to have XP on the SATA and Windows 7 on the IDE, but the IDE drive is smaller and slower and I wanted to essentially swap them over. The boot devices are set in the bios as CD/DVD first, SATA second, IDE third.
So I have installed XP first on the IDE and now Windows 7 on the SATA, but after I removed the Windows 7 DVD and restarted it is refusing to boot saying NO BOOT DEVICE DETECTED, INSERT SYSTEM DISK. Now if I place the Windows 7 dvd in the drive and ignore the PRESS ANY KEY TO BOOT FROM CD/DVD...., it will book fine.
This will surely fustrate non-technical users no end and some may not even think to try and replace the OS disk and try again. I think I know what has happened, but more importantly how do I go and fix it to just boot without needing a damn boot disk everytime!?
Is there a way (or tutorial) to create a repair disc for a multi boot Windows 7/Vista on a USB flash drive? In other words would like to be able to use a USB flash drive in an emergency to boot into a multi boot computer using Windows 7/Vista.
I see where there is a way to create a Vista/XP multi boot USB repair disc but not one for Windows 7/Vista multi boot. Evidently the boot files for Vista/XP are different from the boot files for Windows 7/Vista. I have a 4GB flash drive that I would like to use.
my acer aspire 5250 shut down 3 days ago when i powered it up it says i need a boot disc i dont have the money to buy it is there any way to get my system back up with out the disc?
View 1 Replies View Relatedmy comp says no bootable device --- insert boot disc and press any key when i turn it on recently moved and cant find my disc
View 1 Replies View RelatedMy Acer netbook has developed some kind of fault and I am unsure as to what I ought to do. The netbook does boot to BIOS and also will boot up from an external drive...but will not boot normally. I am thinking of replacing the hard drive but don't know if there could be something else wrong. It says sometimes that it can't read it and from this I am not sure if there is something else wrong. If I change the drive does it sound as though things will work? There are also a couple of other intermittent faults such as certain letters and numbers not working and then everything is fine for a while...
View 4 Replies View Relatedi have been on various forums for advice but unable to solve - this is the problem -
* it turns on & I CAN get into advanced menus
* it will not repair itself no matter what
* it will not go into any other modes , safe Etc....therefore I cannot restore to factory settings etc....
* ive Tried all tricks such as F8, Alt & F11 etc..... to get into advanced menu settings - all lead to the black screen
* everything i click on enter leads to a black screen - only a white curser appears.
its as if there is no way of accessing the computer disc/ hard drive in anyway from boot up. there is clearly a hardware problem but i cannot access anything internal beyond ordinary & advanced menus i just keep being led to the black screen & no activity. the menus work & that is all. i run Windows 7 on a Dell inspiron 1564.
I have Windows 7 on a AMD Phenom Machine. Hard Drive died so I put another one in and restored Windows with Acronis True Image.
When I leave the Windows repair disk in the drive, the restored system starts perfectly, runs perfectly etc. But if I pull that repair disk out of the drive I get this error about "No Bootable Device" "Insert Disc". So in other words that repair disk has to be in the drive, else I get the error.
I have already:
1. Verified that the boot sequence points to my Windows Drive
2. Run system repair. That's useless. It just tells me everything is fine.
3. Run bootrec fixmbr, vixboot, rebuildbcd. No problems found
4. Run Chkdsk. No problems found.
Bluetooth keyboard doesn't kick in until too late so can't F2 to enter boot setup.Can I do it from disc management programme or from a command prompt.I'm trying to upgrade to win 7 64 bit from win 7 32 bit.
View 3 Replies View Relatedmy daughters acer laptop has the following message: windows failed to start. a recent hardware or software change might be the cause.. etc.. insert windows installation disc and restart. we do not have the installation disc.
file: windowssystem32winload.exe
status: OxcOOOOOOf
info: the selected entry could not be loaded because the application is missing or corrupt.
How can I get a boot disc?