I recently rebuilt a computer that had a P4 3.2 Ghz, 2 Gb ram, and windows XP. I put in an asus p5n-e sli motherboard, 6 Gb of ram, and an intel celeron E 3200 2.4 Ghz dual core. The computer is my parents, and the new parts are from my computer that I just upgraded. After I installed the new parts, windows would not start, nor would it boot to a disc to attempt repair. I put the hard drive into my computer to get the files that I needed off of it, then wiped the hard drive with it installed in my computer. I put the freshly wiped drive into the other computer in which I would receive "boot mgr not found ctrl + alt+ del to restart" I then tried to install a fresh copy of windows 7 thinking that boot mgr is part of windows. I tried to boot to the install cd, it loads the files, but then just sits at the starting windows screen and does nothing. I put the hard drive back into my computer and installed windows 7 on it from there, then put it back into the other computer. I still am getting the "boot mgr not found" message and it will not boot to windows. It still will not boot to any disc, even a windows repair disc did not work. If i put the drive into my computer, it will boot just fine
So I have an bit of an odd and I think unique problem (as many searches came up with no solutions). Simply put, my boot manager is missing, but only when my windows install disc is not in the disc drive. It started several months ago and I just left it be, let the disc it int he disc drive and it was not that big of a deal. But just did a clean install couple days ago I re-installed windows 7 ultimate 64-bit on my computer (using an upgrade disc if that makes a difference).I formatted the drive with what I guess is a quick format (the option the install disc gives you). I have tried doing a repair with the install disc but no problems are found every time I try.
In attempting to install W7 64 on generic non-micro ATX [full] form factor desktop, Windows 7 will successfully begin installation. Upon reboot to complete installation I am informed that the boot manager cannot be found. How might I determine what is wrong so that I might correct the problem? Might it be a problem with jumper pins? No-o-o-o, it's not IDE HDDs I'm using; it's ATA. Might Microsoft's installation disc be at fault? I'll try using a different 64-bit disc with the [legal] new license, and then a 32-b it disc with the [legal] new license, but I'm at a loss. If it were the processor, it wouldn't even get to the install GUI that originates from the disc, would it? Otherwise, I'll have to take it to the shop and pay them to do a RAID 0(striped)config/install. The reason I'm posting this here is that I strongly suspect the 64-bit edition discs to be inherently flawed. On my 64-bit processor laptop, the 64-bit disc wouldn't install, but the 32-bit one did. I never worried about that because all I'm using on it are 32-bit apps. It's only on the custom-built desktop I need the 64-bit environment.
My system is a dell Studio XPS 435MT running W7. I just replaced the motherboard. Everything is working fine except the Boot is taking forever. It is getting stuck prior to windows loading and saying " PXE-E53" No Boot file found. In my research this has something to with the system trying to boot from the LAN.
Wind 7 is acting up. I went to update instead of custom. Then it told me to remove my disc and do it start it up and put the disc back. I did this and i was prompted that my boot manager was not found and to prest crt alt del to restart. i restarted but am back on this screen.
when i start my laptop the windows logo hang,all keys not function.i push off power button for 5 seconds and i open it together with f2.start up menu registered ang when i follow the step the result is boot device not found 3fo
When i am start my HP Ultrabook II then error is boot device not found please install an operating system on your hard disk hard disk- ( 3f0 ) f2 system diagnostics for more information,visit: [URL]and press f2
system diagnostics f1 system information <run complet> f2 staert-up test <run complet> f3 run -in test <run complet> f4 hard disk test <hadr disk not exist >
So loaded up a older laptop from 2009, with the common issue " no boot device found". So I went pooped in the restore CDs and reloaded the OS and went through and redid everything. " thought it fixed issue" shut down and reloaded os. With same msg " no boot device found" so i pressed F2 and choose boot proprity hard drive and then it loaded OS as if nothing happened. So i thought maybe my hard drive could have issues, Did harddrive all passed, So i think now that it could be my motherboard or the sata connecter?
Sorry if this question has been answered before but I downloaded Win 7 x86 from my school website and saved it on a clear partition. I am trying to burn a disc but I am new to this. I read I might need power iso to extract files? I burned a disc but I guess i did not specify boot and it did not work. I have a 2gig file ( Win 7) downloaded on my hard drive and I am lost.
I have a digital download verson of Windows 7 Pro64 that i am trying to install over my Vista Home premium 32 install. I have burned the contents of the download to a DVD, however when i try to boot to the DVD it says BOOTMGR is missing. The file structure is the same on the 7 DVD as it is on the Vista disk, and both have BOOTMGR on the top of the Disk.I do have hardware that supports 64bit, and i can boot from the Vista CD, so i think the issue is with the burnt 7 Disk.
Last night I recover my dell inspron from the recovery disk. After recovery of windows on factory when i boot the system it stuck on a error boot device not found and said that i should repair it from windows 7 DVD which i didn't have. Is there any manual way to repair the boot files from another source or through flash drive
I have a few corrupted system files, so I tried booting the precompiled rescue disc from neowin as well as my Windows 7 disc. When I try to boot form the disc it says Windows is loading, then gives me an error 0x000000d. Can some one tell me whats wrong here?
my computer crashed last night and when I have tried to switch it on since it gives me the above message.I have tried entering setup by pressing F2 and changing the hard disk to be the primary boot device, but the same thing occurs.I have created a Windows 7 32-Bit recovery disk by downloading the iso file on my dad's pc and burning that to a dvd. I am able to load this, but when it first starts up it has a table supposed to list operating systems but it is blank and I cannor select anything. It says if my operating system isn't listed, "click load drivers and install drivers for your hard disks" but I don't know where on earth these are located and neither does google seem to.then working through the option on the menu:
-if I click start-up repair it tells me "startup repair cannot repair this computer automatically"
-if I click system restore I get an error message saying I must specify which windows installation to restore
-if I click system image recover it gives me an error message saying "windows cannot find a system image on this computer" and if I try to select one none appear.
I just recently returned from a trip out of town and found when I tried to boot my computer I had a Grub boot error 15, file not found. I've never heard of grub4dos before I began trying to figure out what was wrong with my computer and found that it is used for dual booting. I run windows 7 ultimate x64 and have never dual booted my machine. While my laptop itself is not password protected, I do require a password to get into windows.
get around the required password to install grub4dos, install linux, then copy my hard-drive, leaving it useless when they're done? If not, is there some other way, a virus or trojan, that could cause windows to fail and revert to grub? I did remove my hard-drive, put it into an external case and try to look at it on another computer. In the disk manager it shows that it's healthy, has 465gb avail and the format is RAW.
I reinstalled my hp notebook after getting message boot disk not found (3F0). I am running System Type x64 hp pavilion Dv7 with a AMD Phenom P840 Triple Core Processor.After restoring it from the recovery disk to.. from box condition and reloading all updates and drivers system still gives me the same message. The first time i reinstalled it to factory default and it didn't work. That is why the second time I did the from the box installation. I think I have created more than one operating system now and I don't know how to fix the problem. When it was originally loaded from Staples in January this year it wasn't really running great but I thought it was just my wireless connection was slow. Then it started to take a long time to do anything, on or offline. I went into the updates history from Microsoft and noticed that the first 14 updates they did failed. One of them was for display amd M880G with ati mobility. The computer began lagging worse and worse and starting to become unstable. That was when i decided to run the recovery disk not knowing that it was creating more hard disks. The message is back and now there is more than one hard disk and the last one i did was complete and all updates drivers were successful. I am still getting the boot devise not found message and sometimes it won't start at all.
I recently bought a lop top and have seen the blue s reen 3 times. When downloading AVG anti virus a start up test popped up and said boot drive not found also said Hard disk (3FO) not found please help me fix and down load drivers that I need.
I've 2 dvd rewriters in my pc. Both Pioneer, one oldish and one older. The both work within windows. When I select multi-boot options to run a boot disc they are both displayed to choose from. However, if I select one of them, the disc boots. If I select the other one, the command to boot is ignored and the system boots into windows - obviously ignoring the dvd device. It's the newer one which is the problem. They both used to work ok with a boot disc.
The disc I had received complementary is unfortunately, broken. Can I create a system boot disc? so that I can format my computer when my heart desires.
I have a laptop that will not boot up, It comes up with windows error recovery, and gives the option to launch startup repair. When I select startup repair, it shows a screen that says it is loading files, but then it only loads a black screen with the arrow. I tried booting from a recovery disc made on another windows 7 computer, same results. It will not boot past the black screen. What else can I do? It does not give me the option to boot in safe mode, and the laptop did not come with a windows 7 os disc.
I am trying to run memtest on a new build and for some reason, the machine will not boot from the disc drive. I'm positive that it CAN boot from the disc drive because I just installed windows 7x64 on it last night. I have already configured the BIOS to boot from CDROM as it's first choice and selected to boot from CDROM thru the boot menu. I am 100% positive that this memtest disc is good because I just successfully ran it on my main machine with no problems.
ps. to power the disc drive I am using a 4-pin molex to SATA adapter since my PSU only has 2 SATA pwr connectors and they are being used to power my 2 HDD's. I don't know if this has to do with it...could it be a bad adapter not powering the drive at initial startup? Bear in mind that the drive works fine once I'm in the OS.
When I try to turn on my comp. I get a message saying boot disc failureinsert system disc and press enter.If I switch off and try again it usually works o.k.occassionally I have to try several times. What is wrong, and how do I fix it. Also, is it on the brink of complete failure?
So originally when I bought my Laptop it was Windows Vista. A while ago I upgraded to Windows 7 by downloading the OS and a valid serial key form a third party distributor associated with my school. Next week I`m putting together a new desktop PC, and want to install Windows 7 on it. I have another valid serial key to use for the registration, however do not have a boot disc to use. Wil the System Restore Disc that I can create using the wizard on Win 7 be able to boot and load a new OS on my new desktop or will i have to create a boot disc another way.Also, I still have the original installation files saved in My Downloads, although not in .iso format but expanded and just saved as files.
the latest rtm extract did not come as an iso. Now there is a boot folder, but I can't create the correct boot disc at all.....
Everytime I burn the disc it just doesn't want to boot to it, it just bypasses it. So I can't get a clean install going.... I am running nero 9, any help would be greatly appreciated. I am not that skilled at making boot discs, detailed instructions would be great.
Okay so I have searched online for how to create a Windows 7 Boot Disc, but to no avail. I have blank dvds, I have a legit operating system, and I have an activation code. I have no idea where to go from here and find boot files or installation files or create ISOs etc.
I recently downloaded a copy of Windows 7 Professional 64 bit through MSDN, burned the iso to a dvd using ImgBurn (Auto write speed) and then attempted to boot the disc.
The computer tries to load the files off the disc, and then this error pops up:
Windows failed to start. A recent hardware or software change might be the cause.
File: windowsystem32ootwinload.exe
status: 0xc0000001
info: The selected entry could not be loaded because the application is missing or corrupt.
I checked the file location, and the file was there. I decided to do a factory image restore (probably stupid of me) since I had already backed up all my files and was planning on doing a clean install of 7 anyway.
I then tried the boot again, but got the same error, even though I was under the impression that factory restore would fix any corrupted system files. Since, for all intents and purposes, my computer is "new", and there's nothing on it now except for what came with it, I'm at a loss as to what could be causing the problem.
I have a Dell Inspiron 1720, running Vista 32 bit Home Premium. Intel Core Duo processor, 2.4 GHz.
I screwed up and ordered Windows 7 Pro before I realized I couldn't do an upgrade from Vista Home Premium. I really don't want to resintall all my programs. So I'm thinking about installing a new drive, and doing a dual boot setup with Windows 7 on the new "D" drive. Question is, can I do this with an upgrade version of Windows 7, or do I need the full version?
I just created a system repair disc by clicking "Create a system repair disc" on my computer. The disc was successfully created, then I went to boot it up in VirtualBox and I get a Toshiba error: F3-F100-0003. How could this be? I don't think VirtualBox or the repair disc would have anything to do with Toshiba. I created this disc with a factory preinstallation of Windows 7 on a Toshiba laptop. Did Toshiba put a custom disc image on the computer which will be burned to the disc? Does VirtualBox use the host computers BIOS? (maybe not possible because there was a Windows 7 cursor in front of the error box) Does Microsoft use Toshiba technology in their repair discs?
I just got a new battery for my computer, because the old one died. When the old one died, it messed up the files on the hard drive. I used a windows xp pro installation disc to wipe the hard drive (or delete the partition), then set it as slave with another hard drive as master. Both hard drives are were wiped clean, nothing on them, and now the computer is actually running pretty fast. So, I tried to run the Windows 7 installation cd to install Windows 7 (Nyaha! Redundency!) to the new primary drive. Here's the problem. It won't boot the disc. I went to the BIOS and set it to boot the CD/ROM first, second, and last. It still won't boot the Windows 7 CD. Now, I have 3 CDs for Windows 7, my family has three different computers. I tried the 64 bit one, and the two 32 bit one's, but it will. Not. Work. It just does not boot any of them. It says "Boot Failure from Previous Device.
I have recently reinstalled 7 on a new disk so i can keep the boot free of clutter. Now i want to wipe the old disc so i can fill it with said clutter. Problem is Disk manager seems to recognise it as system and will not give me the option to format.
