My system is a dell Studio XPS 435MT running W7. I just replaced the motherboard. Everything is working fine except the Boot is taking forever. It is getting stuck prior to windows loading and saying " PXE-E53" No Boot file found. In my research this has something to with the system trying to boot from the LAN.
View 14 Replies
I just recently returned from a trip out of town and found when I tried to boot my computer I had a Grub boot error 15, file not found. I've never heard of grub4dos before I began trying to figure out what was wrong with my computer and found that it is used for dual booting. I run windows 7 ultimate x64 and have never dual booted my machine. While my laptop itself is not password protected, I do require a password to get into windows.
get around the required password to install grub4dos, install linux, then copy my hard-drive, leaving it useless when they're done? If not, is there some other way, a virus or trojan, that could cause windows to fail and revert to grub? I did remove my hard-drive, put it into an external case and try to look at it on another computer. In the disk manager it shows that it's healthy, has 465gb avail and the format is RAW.
I was using the computer when all of a sudden it shut down. When I turn it back it on, it automatically tries to do a Start-up Repair. After several minutes, I get the message: "Start-up Repair cannot this repair this computer automatically." When I click on "View problem details," everything looks fine except for "Root cause found: Boot critical file D:CI.dll is corrupt." This happens every time I try to restart the computer. I've tried System Restore and System Image Recovery to no avail.
View 9 Replies View RelatedMy system is a dell Studio XPS 435MT running W7. I just replaced the motherboard. Everything is working fine except the Boot is taking forever. It is getting stuck prior to windows loading and saying " PXE-E53" No Boot file found. In my research this has something to with the system trying to boot from the LAN.
View 12 Replies View RelatedI have a file on my desktop that is called "Awesome." If I go to the properties, it says the file type is "File (.)" If I try to delete it it says "Could not find this item. It is no longer located in (my desktop directory) Verify the item's location and try again. I looked everywhere and searched this many times but nothing works for me. I think I was trying to save a picture as a jpg or something and somehow this happened.
View 2 Replies View RelatedI'm looking at a Toshiba Satellite L455D with Windows 7 home premium. It's has a hard drive about a year old, which I installed for the person at that time with a new copy of Windows. Now, it hangs at the 'starting windows screen.' Start up repair relays this message:
No OS files found on disk.
Repair action: Partition table repair
Result: Failed error code = 0x490
I had tried booting with the dvd prior to seeing this. When it asked what os i wanted to boot, it did list the current os. The hard drive is listed correctly in the bios, so it is at least being recognized. Start up repair seems to be suggesting that the hard drive is wiped, or bad.
I have been having a problem with my comp that won't connect to the net. I did'n t have firewall but fixed that but still unidentified network error.I have dl'd fixes to restore network/internet connectivity but nothing works I think it might be winsock error.
View 1 Replies View RelatedWhile looking at my Windows files, I cant remember were in windows exactly but I found a AMD file but I am running a Nvidea GPU. Is there any reason for this to be here? I have been having some stability issues occasionally so I wonder if this is it? Some AMD drivers have arrived in my system.
View 2 Replies View Relatedmy 6 weeks old acer aspire laptop, win7 - 64bit, has started showing the message "fatal error no language file was found".i cannot get into I/E8 in either normal mode or safe mode. safe mode is good in all other aspects, normal mode is hopeless.the message appears in the middle of the page at the same time desktop opens.
View 9 Replies View RelatedI have an HP Pavillion g7 laptop running windows 7 home premium 64 bit; this message appears every time I start up my computer. I had to restore factory settings within the last 24 hours due to a major crash and an inability for windows to start-up. I want to solve this problem now
View 2 Replies View RelatedWindows 7 64 bitI went to the Microsoft website and reset the hosts file. (I just copied the text on the page that said it was for the Windows 7 hosts) Prior to the hosts reset, the only text in there was 120.0.0.1 localhost. Anyone know what this means? This happened one other time before, so it has to be something.
View 3 Replies View Relatedim getting this error when i importing csv php file to mysql.
View 1 Replies View RelatedI tried to download a PDF but something went wrong during the download and I ended up with a file icon on my desktop without any extension and having 0 bytes. When I try and delete this file icon I get the error message: "Could not find item. This is no longer located in C:UsersMynameDesktop. Verify the item's location and try again". This seems like a contradiction - Windows is showing a file icon on the desktop but then says there is no file there! I have tried searching for a file by that name elsewhere and there is nothing. I have also tried cleaning the reg and doing a disk cleanup. How to delete this useless file icon from my desktop?
View 3 Replies View RelatedI'm trying to run a DOS program (Locoscript 2.51) in XP mode on a Windows 7 Ultimate virtual PC. This doesn't run - with a message 'error writing file(xxxx) path not found'.Program works perfectly in native XP (on a different machine) and the file is in the same place on both.
View 1 Replies View RelatedI have an issue with my computer - every time it puts its self to sleep (although i disabled sleep mode) my computer refuses to boot. It fails to recognise my boot hdd, untill i take out every other HDD, and then plug them in once its booted. On startup i get an error message 'CPU over temperature. Press f1 to continue...', but this generally does not affect anything. I have literally just reapplied thermal compound to my heatsink and CPU, but still get same error.When playing power intensive games, the system runs fine.BSOD error message: driver_irql_not_less_or_equal, researched and found nothing of use, dump file size of 0kb so i can't even debug it.Ram is being read at 800mhz instead of 1066mhz despite changing latencies to 5-5-5-15 and voltage to 2.2v as suggested by kingston.I have scanned for viruses using Avira Free AVG.
Specs:
Asus P5q Pro Turbo - ATX - LGA775
4 x 2gb DDR2 Kingston Hyper-x 1066mhz
Gainward GeForce GTS 250 @1024mb
600w PSU
Intel Core 2 Quad Q6600 @ 2.4mhz.
I have tried updating drivers, but they are all up to date.
I have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
I recently rebuilt a computer that had a P4 3.2 Ghz, 2 Gb ram, and windows XP. I put in an asus p5n-e sli motherboard, 6 Gb of ram, and an intel celeron E 3200 2.4 Ghz dual core. The computer is my parents, and the new parts are from my computer that I just upgraded. After I installed the new parts, windows would not start, nor would it boot to a disc to attempt repair. I put the hard drive into my computer to get the files that I needed off of it, then wiped the hard drive with it installed in my computer. I put the freshly wiped drive into the other computer in which I would receive "boot mgr not found ctrl + alt+ del to restart" I then tried to install a fresh copy of windows 7 thinking that boot mgr is part of windows. I tried to boot to the install cd, it loads the files, but then just sits at the starting windows screen and does nothing. I put the hard drive back into my computer and installed windows 7 on it from there, then put it back into the other computer. I still am getting the "boot mgr not found" message and it will not boot to windows. It still will not boot to any disc, even a windows repair disc did not work. If i put the drive into my computer, it will boot just fine
View 5 Replies View RelatedI know there are a myriad of slave drive access issue posts on here. My thing is that I've managed to take ownership of my slave drive; formerly in a tower - now trying to access it thru my windows 7 laptop. Ive taken ownership of " my documents," but it doesn't seem like it took; I still have to take ownership of every folder in it individually when I go into it. Furthermore, when I going into my music or video folders - I get a "file not found" error when I try to open the files.
View 1 Replies View RelatedIn attempting to install W7 64 on generic non-micro ATX [full] form factor desktop, Windows 7 will successfully begin installation. Upon reboot to complete installation I am informed that the boot manager cannot be found. How might I determine what is wrong so that I might correct the problem? Might it be a problem with jumper pins? No-o-o-o, it's not IDE HDDs I'm using; it's ATA. Might Microsoft's installation disc be at fault? I'll try using a different 64-bit disc with the [legal] new license, and then a 32-b it disc with the [legal] new license, but I'm at a loss. If it were the processor, it wouldn't even get to the install GUI that originates from the disc, would it? Otherwise, I'll have to take it to the shop and pay them to do a RAID 0(striped)config/install. The reason I'm posting this here is that I strongly suspect the 64-bit edition discs to be inherently flawed. On my 64-bit processor laptop, the 64-bit disc wouldn't install, but the 32-bit one did. I never worried about that because all I'm using on it are 32-bit apps. It's only on the custom-built desktop I need the 64-bit environment.
View 12 Replies View RelatedWind 7 is acting up. I went to update instead of custom. Then it told me to remove my disc and do it start it up and put the disc back. I did this and i was prompted that my boot manager was not found and to prest crt alt del to restart. i restarted but am back on this screen.
View 4 Replies View Relatedwhen i start my laptop the windows logo hang,all keys not function.i push off power button for 5 seconds and i open it together with f2.start up menu registered ang when i follow the step the result is boot device not found 3fo
View 1 Replies View RelatedWhen i am start my HP Ultrabook II then error is boot device not found please install an operating system on your hard disk hard disk- ( 3f0 ) f2 system diagnostics for more information,visit: [URL]and press f2
system diagnostics
f1 system information <run complet>
f2 staert-up test <run complet>
f3 run -in test <run complet>
f4 hard disk test <hadr disk not exist >
So loaded up a older laptop from 2009, with the common issue " no boot device found". So I went pooped in the restore CDs and reloaded the OS and went through and redid everything. " thought it fixed issue" shut down and reloaded os. With same msg " no boot device found" so i pressed F2 and choose boot proprity hard drive and then it loaded OS as if nothing happened. So i thought maybe my hard drive could have issues, Did harddrive all passed, So i think now that it could be my motherboard or the sata connecter?
View 3 Replies View RelatedI have a digital download verson of Windows 7 Pro64 that i am trying to install over my Vista Home premium 32 install. I have burned the contents of the download to a DVD, however when i try to boot to the DVD it says BOOTMGR is missing. The file structure is the same on the 7 DVD as it is on the Vista disk, and both have BOOTMGR on the top of the Disk.I do have hardware that supports 64bit, and i can boot from the Vista CD, so i think the issue is with the burnt 7 Disk.
View 2 Replies View RelatedLast night I recover my dell inspron from the recovery disk. After recovery of windows on factory when i boot the system it stuck on a error boot device not found and said that i should repair it from windows 7 DVD which i didn't have. Is there any manual way to repair the boot files from another source or through flash drive
View 1 Replies View Relatedmy computer crashed last night and when I have tried to switch it on since it gives me the above message.I have tried entering setup by pressing F2 and changing the hard disk to be the primary boot device, but the same thing occurs.I have created a Windows 7 32-Bit recovery disk by downloading the iso file on my dad's pc and burning that to a dvd. I am able to load this, but when it first starts up it has a table supposed to list operating systems but it is blank and I cannor select anything. It says if my operating system isn't listed, "click load drivers and install drivers for your hard disks" but I don't know where on earth these are located and neither does google seem to.then working through the option on the menu:
-if I click start-up repair it tells me "startup repair cannot repair this computer automatically"
-if I click system restore I get an error message saying I must specify which windows installation to restore
-if I click system image recover it gives me an error message saying "windows cannot find a system image on this computer" and if I try to select one none appear.
I reinstalled my hp notebook after getting message boot disk not found (3F0). I am running System Type x64 hp pavilion Dv7 with a AMD Phenom P840 Triple Core Processor.After restoring it from the recovery disk to.. from box condition and reloading all updates and drivers system still gives me the same message. The first time i reinstalled it to factory default and it didn't work. That is why the second time I did the from the box installation. I think I have created more than one operating system now and I don't know how to fix the problem. When it was originally loaded from Staples in January this year it wasn't really running great but I thought it was just my wireless connection was slow. Then it started to take a long time to do anything, on or offline. I went into the updates history from Microsoft and noticed that the first 14 updates they did failed. One of them was for display amd M880G with ati mobility. The computer began lagging worse and worse and starting to become unstable. That was when i decided to run the recovery disk not knowing that it was creating more hard disks. The message is back and now there is more than one hard disk and the last one i did was complete and all updates drivers were successful. I am still getting the boot devise not found message and sometimes it won't start at all.
View 11 Replies View RelatedI recently bought a lop top and have seen the blue s reen 3 times. When downloading AVG anti virus a start up test popped up and said boot drive not found also said Hard disk (3FO) not found please help me fix and down load drivers that I need.
View 5 Replies View RelatedA new laptop and the screen goes from the DELL logo to CHECKING MEDIA [FAIL] then NO BOOT DEVICE FOUND. PRESS ANY KEY TO REBOOT MACHINE.in BIOS boot options, LEGACY BOOT and UEFI BOOT.UEFI BOOT needs network connection to boot as I understand. With LAN cable plugged in I get: Start PXE over IPv4 Press ESC to EXITPXE-E18: Server Time Out.I tried using legacy boot but after CLIENT MAC ADDR info displayed the next entry is: PXE-M0F: EXITING PXE ROM.
View 1 Replies View RelatedI cannot boot into Windows because it says that the file /boot/BCD is missing with an error code of 0x0000007. If I run Repair from my installation disk and in System Recovery Options, it says that it has detected problems and asks if I want to repair it. The items it wants to repair are: " The following startup option will be repaired:Name: {bootmgr}Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows 7 Ultimate (recovered)
Path: Windows
Windows Device: Partition=C: (476938MB)
Name: Windows Recovery Environment (recovered)
Path: Recovery9426aa67-30ff-11e0-a348-506313b5e718Winre.wim
Windows Device: Partition=C: (476938MB)
A copy of the current boot configuration data will be saved as C:BootBCD.Backup.0002"If I click yes, it says that it cannot save the current settings for the BCD and refuses to continue. When I choose Startup Repair, it attempts to fix the problem but fails.
The problem details are:
Root cause found:
No OS files found on disk.
Repair action: Partition table repair
Result: Failed. Error code: 0x3bc3
I think that this is because Startup Repair is trying to fix the thumbdrive that I keep my Windows 7 install files in. I am overseas now and as my computer does not have an internal optical disk drive and my external drive is back home, thus using my thumbdrive is the only way to access the repair console.
I tried running a few commands, namely:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
Fixmbr and fixboot work, but when I run RebuildBCD, it detects C:Windows as having a Windows installation, but if I type Y(yes) or A(all), it says that the requested system device cannot be found.
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
