Driver_irql_not_less_or_equal, Researched And Found Nothing Of Use, Dump File Size Of 0kb
May 12, 2011
I have an issue with my computer - every time it puts its self to sleep (although i disabled sleep mode) my computer refuses to boot. It fails to recognise my boot hdd, untill i take out every other HDD, and then plug them in once its booted. On startup i get an error message 'CPU over temperature. Press f1 to continue...', but this generally does not affect anything. I have literally just reapplied thermal compound to my heatsink and CPU, but still get same error.When playing power intensive games, the system runs fine.BSOD error message: driver_irql_not_less_or_equal, researched and found nothing of use, dump file size of 0kb so i can't even debug it.Ram is being read at 800mhz instead of 1066mhz despite changing latencies to 5-5-5-15 and voltage to 2.2v as suggested by kingston.I have scanned for viruses using Avira Free AVG.
Specs:
Asus P5q Pro Turbo - ATX - LGA775
4 x 2gb DDR2 Kingston Hyper-x 1066mhz
Gainward GeForce GTS 250 @1024mb
600w PSU
Intel Core 2 Quad Q6600 @ 2.4mhz.
I have tried updating drivers, but they are all up to date.
I've heard the term memory dump file or dump file being used? I was wondering what it means?I've gathered that it may be something to do with error messages or errors.
Just build a new computer running windows 7 64-bit- it's fast and works great. I bought an external hard drive to back it up and every time I run a back up I get a BSOD. I have a dump file but don't know how to read it so I am posting it here.Actually it seems that I can not upload the dump file here.
I've tried to have a dump file generated on crash but it's not getting written. I followed the following page to set up how Windows would create my dump files:
Dump Files - Configure Windows to Create on BSOD
I had a few crashes of different types - photos attached. I also attached the zip file as per instructions from here: [URL]
I cannot due to the fact I cannot access anything except the f8, f10/alt, f2 and f12 screens which no matter which selection I attempt I end up back to this dreadful blue screen and errror message. I am posting from a nearby desktop computer with hopes you will be able to guide me in using either my Windows operating system reinstallation disc, or a boot/repair disc I have with restore tools included.I have changed the boot order a few different ways, with no luck. I have tried windows debugging and every other option in the f8 menu, with no luck. I have tried the f12 selections, with no luck.As I've learned, the PC is a Gateway NV59C with 4GB DDR3Mem, 320 GB HHD, Intel HD graphics, Intel Core i3-330MHD with Windows 7 and 64bit.
I have never had a month without a BSOD. Every time I analyze the dump file, the probably cause is different. All I want is a stable Windows machine that I don't have to worry about when I go to bed. Is that too much to ask? nyway, system info:Windows 7 64 bitRAM: G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500)HDD: all over the place but 2x RAID0 arraysCPU: Intel Core 2 Duo E8400 Wolfdale 3.0GHz LGA 775 65WMoBo: GIGABYTE GA-EP45C-UD3R LGA 775 Intel P45PSU: 700WI built this box In September of 2009 (2 yrs ago)
App takes a long time to load and generally runs slow when in use. As far as I know it was designed for Vista 64 bit. BTW the cmd "cscript adplus.vbs -crash -nodumponfirst -minionsecond -quiet -pn dpeg.exe" needed to be changed to "cscript adplus_old.vbs -crash -nodumponfirst -minionsecond -quiet -pn dpeg.exe".
Attached is the dump file for the blue screen error I have been receiving on our new Windows 7 Machine.
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:Users mcculloughDesktop�20210-28126-01.dmp]
I had completed a beautiful 82-slide PowerPoint presentation, but the wav file I embedded was HUGE (about 200 MB) and not to my choosing. I just had to have the music a certain length to span across 82 slides. Is there ANY WAY to reduce the size of this music wav file (so that it conforms to the 50 MB max file size for PowerPoint). I would rather embed this music file than to have a link.
Assume I work currently with MS Word and/or an text editor like wordpad.Then (suddenly) the system crashes with bluescreen.A Minidump is automatically created and saved in a Minidump file.After restart I am asked whether I want to send this minidump for further investigation to MS.Hmm, I wonder whether this Minidump file contains the full memory content.And if the memory content contains the current MS Word resp. current open file if editor.Both could contain sensitive business information which I don't want to pass outside.Is this the case
I have RTL81918192SE Network adapter I made upgrade when i want to connect to wifi happen blue screen and restart bccode 076. Minidump i put here. Maybe i need just disable some drive?
I'm gettingthe same "out of memory" error message on Outlook 2007 running under Windows 7 (64 bit). Reading this thread, I checked my RAM and Page File Size and they are both ~6G... Should I REALLY increase my Page file size to 12G?
As im having a clearout and tidying up storage folders prior to new back ups - is there a way in Win Explorer or a third party utility to see total size of a folder so when i look at a list of HDD contents i can see which is using up most disk space? each folder may have sub folders as well as files, but apart from right click to Properties i would like a quick quick way of viewing folder size. or even sorting by size rather than folder name. The Size column after Date Modified and then Type isnt wont show a total size. Surely theres a way of Windows or a utility that can show the total size of a folder??I can then quickly go to a folder which has a large content and see if i can delete some of its contents. Folders like "Photos" is obviously going to be large, but others arent!Also as i still get confused about the way WIN Backup works im seriously considering Acronis so as to have incremental backups.
It appears windows does not cnform to the standard method of calculating file sizee.g. the standard value of 1GB is 1000MB, however windows uses 1024MB. As such it is not in fact a "Gigabyte" But a "Gibibyte". This is extremley annoying, as for egxample, I have a 2TB hard Drive, which in the settings tells me is:2,000,263,573,504 bytes, this is correct, however it also tells me that the hard drive is 1.81TB when it should say 2TB. Is there any way I can change windows's calculation method for file sizes? So that 1TB = 1,000,000,000,000 bytesinstead of 1,099,511,627,776 byte which is a TiB (or tebibyte) This is probably a very stupid question and pointless
I recently purchased a Dell PC with free Windows 7 upgrade. I only installed Mozilla Firefox and Norton Internet 2009 on the PC before I upgraded to Windows 7. I decided to do a custom install from the upgrade DVD so that I could change the partitioning following an article in the November issue of Australin Personal Computer Magazine.
The article said "Windows 7 requires around 10GB of hard drive space. We're planning to keep applications on the same partition as well, so we'll generously add another 20GB, making a 30GB partiition". So during the install process I deleted all the existing partitions, created my partitions with 30GB for the OS. The install process created the system section and everything worked as expected. To my surprise once the install had finished there was 27GB in the C:drive. I assumed it was keeping the old Vista somewhere.
I couldn't find a windows.old folder and in Disk Clean up the button 'Clean up System Files' didnt show for me - there is only one User account and I am the administrator so I didn't know what was causing that problem. So I decided to re-install Windows and increase the OS partition to 40GB - which I did. Only to find that this partitiion is now 35GB full. Again, no windows.old file can be found but the 'Clean up System Files' button appears - but there are no 'Previous Windows Installations' to delete. I decided to bear with it, but already I have a red warning light that the C: drive is nearing capacity.
So I decided to try a third install of Windows 7 and forget the idea of partitioning all together. But now I can only format the OS partition and can not format or delete any other partitions during the custom install process and all my old files were still there after the install. I have formatted the other partitions (i.e. not C now but still they can not be formatted or deleted in anyway through the install process. Windows 7 will not install on any partition other than C:. So it seems this 40GB is all I have for the OS, but it is now full.
Anyone have any ideas what I should do next. I have read everything I can on this site, but the solution seems to be always to delete partitions, which I am unable to do, and format partitions, which I have done (where possible).
If I could solve the problem as to why Windows is now 37GB would resolve my issue, but it is concerning that I can't change the partitioning also.
I recorded a 2 hr 1970's movie off the air and the file size was 2.65Gb. I recorded a 3 hr modern movie off the air, and the file size was 28+Gb. I assume that the file size is because one was HD and the other wasn't, but is there a way to compress the HD file or a way in set-up to reduce the recording quality?The WinTV program that comes with my Haupauge tuner has such an option, but the setting doesn't seem to carry over to Media Center.Related to this, when I try to copy a recorded TV file to a thumg drive, it tells me that any file over arounbd 4Gb is too large, even though I am using a 16Gb thunb crive. How can I change this?
I am running Office 2010 on Windows 7 64-bit. I just created my first PowerPoint presentation containing 30 slides, all containing images, with a total of 35 images overall. All of the images together add up to less than 6 MB. During the creation of the slides I was careful to follow the guidelines for Sizing Digital Images For Powerpoint. However, when I save the presentation to disk, it is over 55 MB! I have tried to Compress Pictures from the Format toolbar-- no effect. In fact, file size of the presentation was larger after this. If I go to File>Info>Optimize Media Compatibility, this option is GRAYED OUT and does not work! I want to be able to send this presentation as an email attachment, but 55MB is way too big!
i purchased a bluetooth� doggle and windows 7 automatically detected the device manager detects as But problem is :::: if i want to send or recive a file size greater than 256 kb (for example a song 5mb) it is not working in windows 7 whether it is 32 bit or 64 bit the same doggle is detected automatically and working finein windows xp?
Upgraded from XP a week ago and now playing with 7 for the first time. I pulled the trigger completely so no going back. So far, I really like it, but need to get more comfortable with it.
Problem is my system restore points are ballooning and squeezing out old restore points. Example: I had roughly 10 points after manually creating each one when I was doing my initial software installs. A day later, I looked and they were all gone except for 1 point which had ballooned to fit my entire allocation (2 or 3%) at the time. So this 1 point killed all my previous 9 points. And I can't understand how this happened.
So I upped system restore to 7%/10GB to test what's going on, and now I'm consistently seeing 2GB sized restore points vs. a couple hundred megs which is what I expect.
The thing I can't abide is my restore points getting squeezed out for new ones. Maybe 1 or 2, but not all of them for a single massive one that's auto generated by the system.
EDIT: I've just confirmed that my system restore function is actually fluid...the restore points grow. I turned off restore, deleted all points, and rebooted. Then I manually created a single, new point as a baseline. It started out as 50 MB. And continues to grow, even as I check mail or open up my browser. Now that same single restore point is 94 MB.
So I can understand why I developed huge restore points, especially as I was playing around with 7, installing things, etc. The problem continues to be that a) the individual restore point files can grow to be huge (2+ GB), and b) the huge files push out old restore points.
I'm curious if this is by design or an actual flaw. I don't want my restore points to grow or be fluid. I want them to be a snapshot in time that I can revert back to in case I mess things up. Gold star to anyone that can turn the "fluidity" off.
I have three email accounts with gmail connected to outlook 2010. Sadly the PST file contains all the emails from my email addresses and since I hate deleting emails the PST files are huge. Is there a way to set up outlook so it only goes back X ammount of time for storing email on my system and have some other way to access anything older?Right now I have 10 GB's of files on my laptop and I am sure my desktop to. So I would much rather shrink that down as much as possible, if not then I can move the files to a none OS HDD, but with my laptop at least hard drive space is somewhat limited.
I have MS Access 2010 & have a database that has been about 45 MB in size for 2 years. About a month ago I noticed it now is 67 MB. I compact & repair every time I save it which is twice a month. I've gone back & did a compact & repair on the 67 MB file but it does not change.
I must have looked at & changed something without realizing it. The actual number of records appears to be correct. How can examine and/or compare tables or other internals between the two sizes? I've seen a program called AccdbMerge come up on a few Google hits & was wondering if anyone ever used it?
I need to reduce the actual file size of a lot of pictures that I have, I want to do them all in one go and I don't think paint is capable of doing this. A simple bat/batch file command would be ok?
i have a video i wanna send to someone, its is 1.3 GB uncompressed, i have researched all the best Winrar compression settings and when i compress it the file ends up being 1052MB which is slightly to big for my preferred host site (Megaupload) - its driving me crazy theres no alternative to MU available that hosts over 1o24MB for free without asking for bank details and all that personal stuff.
So i would be greatful if anyone could suggest how i can make the file scrape under the 1024MB size (i can't compress so its loses quality when expanded btw) or suggest a alternative host site to MU that works.
Is there a file size limit in Skydrive for iPad? Not the upload size but the 'view' size.I have uploaded a few pdf's from my 7pc and the ones that are reasonably small display in iOS SkyDrive just lovely. However I have a magazine or two that are over 100megs and the app says they are unavailable.