I have been having a problem with my comp that won't connect to the net. I did'n t have firewall but fixed that but still unidentified network error.I have dl'd fixes to restore network/internet connectivity but nothing works I think it might be winsock error.
View 1 Replies
I have a d-link router "DIR 825 " I come out of my brighthouse modem to the router and go across the room to a netgear switch. I have one computer that won't find a ip address when coming out of the netgear switch. I have to run straight from the D-link router to the pc to get on line. The other PC works fine coming out of the switch. Is there something I can check to get the one pc to recognize the IP address when coming out of the netgear switch
View 2 Replies View RelatedI have a d-link router "DIR 825 " I come out of my bright-house modem to the router and go across the room to a netgear switch. I have one computer that won't find a ip address when coming out of the netgear switch. I have to run straight from the D-link router to the pc to get on line. The other PC works fine coming out of the switch. Is there something I can check to get the one pc to recognize the IP address when coming out of the netgear switch?
View 2 Replies View RelatedHey there. I encountered a similar problem when trying to change my IP Address as discussed in this thread here. [URL] I tried following their steps, but got no results. I attached some pictures
View 14 Replies View RelatedI have a Linksys WRT54G v2 & latest OEM firmware. A few days ago I tried to release & renew my IP address to get a new one. It did not change, and just thought the Comcast modem was remembering the IP and just went about my normal web surfing. Today, nothing would connect to the internet. My WRT54Gs status was fine & had the same IP it had a few days ago.
I tried to release & renew the IP again, nothing changed. I called Comcast tech, and the automated thing reset the modem, still no internet, still same IP address. I released the IP & unplugged the router for about 5 mins, renewed & got the same IP again. I released again, and reset to factory defaults, same IP again. I tried connecting directly to the modem and see if I works, and it did!
I had another D-Link DI-624 Rev C v2.70 .. released the IP, and hooked it up .. everything works fine. So for S&Gs I released and hooked up the WRT54G to see if the IP changed at all, nope same IP! I would like to use the Linksys again, as the D-Link sometimes got funky under heavy load.
My system is a dell Studio XPS 435MT running W7. I just replaced the motherboard. Everything is working fine except the Boot is taking forever. It is getting stuck prior to windows loading and saying " PXE-E53" No Boot file found. In my research this has something to with the system trying to boot from the LAN.
View 12 Replies View RelatedMy system is a dell Studio XPS 435MT running W7. I just replaced the motherboard. Everything is working fine except the Boot is taking forever. It is getting stuck prior to windows loading and saying " PXE-E53" No Boot file found. In my research this has something to with the system trying to boot from the LAN.
View 14 Replies View RelatedI have a file on my desktop that is called "Awesome." If I go to the properties, it says the file type is "File (.)" If I try to delete it it says "Could not find this item. It is no longer located in (my desktop directory) Verify the item's location and try again. I looked everywhere and searched this many times but nothing works for me. I think I was trying to save a picture as a jpg or something and somehow this happened.
View 2 Replies View RelatedI'm looking at a Toshiba Satellite L455D with Windows 7 home premium. It's has a hard drive about a year old, which I installed for the person at that time with a new copy of Windows. Now, it hangs at the 'starting windows screen.' Start up repair relays this message:
No OS files found on disk.
Repair action: Partition table repair
Result: Failed error code = 0x490
I had tried booting with the dvd prior to seeing this. When it asked what os i wanted to boot, it did list the current os. The hard drive is listed correctly in the bios, so it is at least being recognized. Start up repair seems to be suggesting that the hard drive is wiped, or bad.
I have been troubleshooting an error with both my WIRED Internet Connection and AUDIO since installing Windows 7, over a previously running XP SP3 OS on the same Comp.I have 3 desktops running through this working connection (Router) with no problems. If I connect directly to the Modem, no problem on the internet.Through the Router, my computer retains its connection one way, cmd. ipconfig /release, ipconfig /renew.This lasts for a period but if ever awaking my comp, the yellow explanation mark returns and i repeat the command.Audio is also not working. I know its likely a driver error, NIC Card, maybe, but its an old comp we put together, what specs do you need to resolve this matter?
View 2 Replies View RelatedWhile looking at my Windows files, I cant remember were in windows exactly but I found a AMD file but I am running a Nvidea GPU. Is there any reason for this to be here? I have been having some stability issues occasionally so I wonder if this is it? Some AMD drivers have arrived in my system.
View 2 Replies View Relatedmy 6 weeks old acer aspire laptop, win7 - 64bit, has started showing the message "fatal error no language file was found".i cannot get into I/E8 in either normal mode or safe mode. safe mode is good in all other aspects, normal mode is hopeless.the message appears in the middle of the page at the same time desktop opens.
View 9 Replies View RelatedI have an HP Pavillion g7 laptop running windows 7 home premium 64 bit; this message appears every time I start up my computer. I had to restore factory settings within the last 24 hours due to a major crash and an inability for windows to start-up. I want to solve this problem now
View 2 Replies View RelatedWindows 7 64 bitI went to the Microsoft website and reset the hosts file. (I just copied the text on the page that said it was for the Windows 7 hosts) Prior to the hosts reset, the only text in there was 120.0.0.1 localhost. Anyone know what this means? This happened one other time before, so it has to be something.
View 3 Replies View RelatedI just recently returned from a trip out of town and found when I tried to boot my computer I had a Grub boot error 15, file not found. I've never heard of grub4dos before I began trying to figure out what was wrong with my computer and found that it is used for dual booting. I run windows 7 ultimate x64 and have never dual booted my machine. While my laptop itself is not password protected, I do require a password to get into windows.
get around the required password to install grub4dos, install linux, then copy my hard-drive, leaving it useless when they're done? If not, is there some other way, a virus or trojan, that could cause windows to fail and revert to grub? I did remove my hard-drive, put it into an external case and try to look at it on another computer. In the disk manager it shows that it's healthy, has 465gb avail and the format is RAW.
im getting this error when i importing csv php file to mysql.
View 1 Replies View RelatedI tried to download a PDF but something went wrong during the download and I ended up with a file icon on my desktop without any extension and having 0 bytes. When I try and delete this file icon I get the error message: "Could not find item. This is no longer located in C:UsersMynameDesktop. Verify the item's location and try again". This seems like a contradiction - Windows is showing a file icon on the desktop but then says there is no file there! I have tried searching for a file by that name elsewhere and there is nothing. I have also tried cleaning the reg and doing a disk cleanup. How to delete this useless file icon from my desktop?
View 3 Replies View RelatedI'm trying to run a DOS program (Locoscript 2.51) in XP mode on a Windows 7 Ultimate virtual PC. This doesn't run - with a message 'error writing file(xxxx) path not found'.Program works perfectly in native XP (on a different machine) and the file is in the same place on both.
View 1 Replies View RelatedI have an issue with my computer - every time it puts its self to sleep (although i disabled sleep mode) my computer refuses to boot. It fails to recognise my boot hdd, untill i take out every other HDD, and then plug them in once its booted. On startup i get an error message 'CPU over temperature. Press f1 to continue...', but this generally does not affect anything. I have literally just reapplied thermal compound to my heatsink and CPU, but still get same error.When playing power intensive games, the system runs fine.BSOD error message: driver_irql_not_less_or_equal, researched and found nothing of use, dump file size of 0kb so i can't even debug it.Ram is being read at 800mhz instead of 1066mhz despite changing latencies to 5-5-5-15 and voltage to 2.2v as suggested by kingston.I have scanned for viruses using Avira Free AVG.
Specs:
Asus P5q Pro Turbo - ATX - LGA775
4 x 2gb DDR2 Kingston Hyper-x 1066mhz
Gainward GeForce GTS 250 @1024mb
600w PSU
Intel Core 2 Quad Q6600 @ 2.4mhz.
I have tried updating drivers, but they are all up to date.
I have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
I know there are a myriad of slave drive access issue posts on here. My thing is that I've managed to take ownership of my slave drive; formerly in a tower - now trying to access it thru my windows 7 laptop. Ive taken ownership of " my documents," but it doesn't seem like it took; I still have to take ownership of every folder in it individually when I go into it. Furthermore, when I going into my music or video folders - I get a "file not found" error when I try to open the files.
View 1 Replies View RelatedI was using the computer when all of a sudden it shut down. When I turn it back it on, it automatically tries to do a Start-up Repair. After several minutes, I get the message: "Start-up Repair cannot this repair this computer automatically." When I click on "View problem details," everything looks fine except for "Root cause found: Boot critical file D:CI.dll is corrupt." This happens every time I try to restart the computer. I've tried System Restore and System Image Recovery to no avail.
View 9 Replies View RelatedI'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
So, my antivirus (avast 5.0) found an "infected file" which it deleted. Shortly after that, he asked me to restart the computer for a startup analysis, which i tried. My computer then restarted, and I got to a "startup repair" window, trying to resolve problems. This windows runs for about 25mn to finally tell me that it is unable to correct the problems.I of course tried to boot in safe mode, tried "system restauration" a few times, and I allways get to the "startup repair" window.I also don't have win7 installation CD because they don't give it to you with your laptop when you buy it around here (yes, I made reclamations to get it but they just answered me that if I wanted the cd I had to pay the windows7 license again, this was out of the question).
I'm actually booted on a linux usb device (and hopefully I have access to all my datas!), and I have two questions for you (maybe three in fact):1- Is there any way to reinstall the startup whole thing without the installation CD?2- Is there a file where avast's last actions are reported? I went through the log files, report folders and journal folders in my avast folders, and couldn't find any clue about the file he deleted. My idea was simply to get the name of that file to replace it manually.
I've installed Outlook 2010 after formatting my PC, then deleted it because of connection problems to Gmail. I've tried to install it again, but all my previous Gmail accounts setup have been saved(and thus I couldn't use Outlook for Gmail), so I deleted it again, but this time, thinking that it will solve the problem, I've also manually deleted some Outlook files that weren't deleted after uninstalling.I've tried again to install Outlook, but now when I try to open it I get this error message:
"The file c:usersusernamedocumentsoutlook filesoutlook.pst is not found".
OS: Windows 7 home premium 32bit
as usual I turned off my laptop and after a while a turned on again to use my laptop but it couldn't reach operating system and showed error : " OPERATING SYSTEM NOT FOUND" !
I tried all instructions to solve the problem and finally run by windows start up CD to re-install new windows. this time I faced error: " No drivers were found. click load driver to provide a mass storage driver for installation"
So the other day I logged on to my computer to find all my downloads gone and not reach able and the folder has a huge error something like File osociated cant be found. I have system restored to the previous today and it didnt work What do I do?
View 2 Replies View Relatedwhenever I open docx file there is hidden file ~$name of file.docx created. which type of file is that? Is it in virus, maleware. for example If I open house.docx file then ~$house.docx file created which is hidden form. I had saw this file when i select show all hidden file option. when i try to open ~$house.docx file it show message the file is corrupted and cannot be open.
View 1 Replies View RelatedI installed Win 7 and if i try to open my computer of click on desktop and open up screen resolution etc. I get "Explorer.exe -Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item." I did a search but could not find anything related to this error in Win 7. I have found some others attached to Win XP but have to do with the installation of some software which prevents access to explorer.exe. When I boot in safe mode this issue does not appear...
View 9 Replies View RelatedAfter doing a copy and paste, we have, on 3 occasions so far, found the copied data in an entirely different file. Twice data from a copy appeared in an excel spreadsheet and once a picture copied in facebook appeared in an email. The excel problem is very worrysome as it is our family budget. how this could happen? In the case of the excel events no paste operation was intentionally done.
View 5 Replies View RelatedHow to create a batch file that will move files based on the file type?My Requirement : I need a batch file to copy all .doc files in all my HardDisk to aremovable disk say (Z: drive) . Can anyone make it possible using a batch file
View 4 Replies View Related
