Cannot Release/Renew IP Address
May 27, 2011
Hey there. I encountered a similar problem when trying to change my IP Address as discussed in this thread here. [URL] I tried following their steps, but got no results. I attached some pictures
View 14 Replies
ADVERTISEMENT
Nov 8, 2012
I have been troubleshooting an error with both my WIRED Internet Connection and AUDIO since installing Windows 7, over a previously running XP SP3 OS on the same Comp.I have 3 desktops running through this working connection (Router) with no problems. If I connect directly to the Modem, no problem on the internet.Through the Router, my computer retains its connection one way, cmd. ipconfig /release, ipconfig /renew.This lasts for a period but if ever awaking my comp, the yellow explanation mark returns and i repeat the command.Audio is also not working. I know its likely a driver error, NIC Card, maybe, but its an old comp we put together, what specs do you need to resolve this matter?
View 2 Replies
View Related
Mar 14, 2011
I have a d-link router "DIR 825 " I come out of my brighthouse modem to the router and go across the room to a netgear switch. I have one computer that won't find a ip address when coming out of the netgear switch. I have to run straight from the D-link router to the pc to get on line. The other PC works fine coming out of the switch. Is there something I can check to get the one pc to recognize the IP address when coming out of the netgear switch
View 2 Replies
View Related
Mar 15, 2011
I have a d-link router "DIR 825 " I come out of my bright-house modem to the router and go across the room to a netgear switch. I have one computer that won't find a ip address when coming out of the netgear switch. I have to run straight from the D-link router to the pc to get on line. The other PC works fine coming out of the switch. Is there something I can check to get the one pc to recognize the IP address when coming out of the netgear switch?
View 2 Replies
View Related
Jan 16, 2011
I have a Linksys WRT54G v2 & latest OEM firmware. A few days ago I tried to release & renew my IP address to get a new one. It did not change, and just thought the Comcast modem was remembering the IP and just went about my normal web surfing. Today, nothing would connect to the internet. My WRT54Gs status was fine & had the same IP it had a few days ago.
I tried to release & renew the IP again, nothing changed. I called Comcast tech, and the automated thing reset the modem, still no internet, still same IP address. I released the IP & unplugged the router for about 5 mins, renewed & got the same IP again. I released again, and reset to factory defaults, same IP again. I tried connecting directly to the modem and see if I works, and it did!
I had another D-Link DI-624 Rev C v2.70 .. released the IP, and hooked it up .. everything works fine. So for S&Gs I released and hooked up the WRT54G to see if the IP changed at all, nope same IP! I would like to use the Linksys again, as the D-Link sometimes got funky under heavy load.
View 9 Replies
View Related
Nov 24, 2011
how do i release my ip address so that i can use my computers immediately one after the other on the internet?
View 3 Replies
View Related
Dec 24, 2011
I have been having a problem with my comp that won't connect to the net. I did'n t have firewall but fixed that but still unidentified network error.I have dl'd fixes to restore network/internet connectivity but nothing works I think it might be winsock error.
View 1 Replies
View Related
Jul 7, 2012
My internet connection shows 'no internet access' even though my ISP shows the connection is coming into the house just fine. I usually use a router (NetGear-WNR3500U) but I right now I have the Ethernet connection plugged directly into my PC. I tried directly plugging into my laptop and the internet works just fine. So I know the problem resides in the PC.
Some troubleshooting things I have tried.
-Power cycled my modem, router and PC.
-Repinged my connection from my ISP(Comcast Xfinity)
-Used the reset option on the router and the modem
-I was walked through the internet options needed with the tech support from my ISP to make sure DHCP was enabled and every other setting was correct, and he cleared me that all settings were correct.
-Tried ipconfig commands to /renew and /release my IP When I tried ipconfig /renew I get the error 'An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server'
-Restored my PC to a restore point where the Internet was working
All of these options did not work.
What I think the problem is and I am not sure how to fix it, when I run the ipconfig /all command my Auto configuration IPv4 Address shows 169.254.112.76 which I was told is a router IP address even though I am plugged directly from the modem to my PC with an Ethernet cord. So I think that's my problem? But I am not sure.
View 4 Replies
View Related
Sep 19, 2011
I have a port that remains allocated (Port 5150) after removal on some software and now thta I wish to install an upgrade it tells me that the port is already allocated.
Is it possible to release it so I can install the upgrade tot he same port?
View 2 Replies
View Related
Jan 26, 2012
how to release my window 7 ip m not use one website only othewise laptop is working fine.
View 5 Replies
View Related
Oct 14, 2012
I had a pre release of Windows 7 and was adding the Windows 7 Ultimate but when I added it all of my settings as far as the desktop and programs did not transfer over. I did save everything, is there a way I can revert to my old Windows 7 pre-release? Or an easy way to have my desktop, documents, etc on my new version?
View 3 Replies
View Related
Oct 18, 2011
I have a friend who who bought Windows 7 (I think Professional) x64 from school via the Microsoft Academic Alliance when it was Release Candidate 2. The issue we are running into is re-installing it. We don't have the original CD, but we do have the key. I have a CD full of 7 OEM installs, but I can't find one that will accept this key. I have the PC installed to OEMALL 7 Pro currently hoping that I could then change the key, but it won't accept it, it says the key is not valid.Anyone have an idea how to re install this version of 7?
View 4 Replies
View Related
Jul 26, 2009
I don't know if it's already been reported but Nvidia have released new drivers for Windows 7.
GeForce/ION Driver Release 190 (x64)
GeForce/ION Driver Release 190 (x86)
Thought you might be interested. Hopefully it will resolve some freezing in certain games.
View 0 Replies
View Related
Jan 18, 2009
Using a firewire device and watching some online video training via my firewire device.
When I go to launch the AUDIO application that I am trying to gain expertise in, it says the audio driver is in use (channels 1 and 2) so am trying to figure out how to RELEASE the driver into the background so I can play both the training video (Lynda.com via quicktime) and the audio application. (REASON 4).
View 0 Replies
View Related
May 18, 2012
Is there a list of updates for windows 7 x64 in release date.I want to make a custom install disk with rt7 lite but i want all the updates to be installed and was thinking that i should install them in order of release.just something simple with release date on??
View 1 Replies
View Related
Jan 11, 2010
First, when I try to release a USB device (thumb drive) from W7, it says, "OK to remove USB storage device" but, the device STILL has power applied to it. XP cut the power prior to allowing you to remove the drive. What gives? W7 has corrupted the drive several times already, and WILL NOT remove power even though the device drops off your explorer.
Second weird problem is missing icons after a program is installed. I install Fallout 3 for instance, and the program start icons are missing. I have to manually copy and paste the launcher into my Games folder in the start menu from the explorer files. Where are the start icons going? Never happened in XP, ever.
Third, how do you arrange your start menu like XP with the "open all users" from the start menu? W7 did away with this. I like to GROUP my programs into folders so the start menu stays managable;
Applications
Games
Accessories
System Tools
Fourth, it seems to interpolate to a CRT! on many resolutions, resulting in a terrible blurry mess Why? A CRT has no native resolution, that's why I keep it (Dell 19" Trinitron). Are there 64-bit drivers I can't find? It will only accept it's "generic" drivers. XP allowed any resolution I want with 100% clarity. It isn't the monitor. AERO makes it WAY worse, too. Same Nvidia 260GT card in both systems, but with 64-bit drivers video card drivers.
I have all new 64-bit drivers and hardware, and W7-64 bit has all manner of BSOD's and lock-ups. Thank God the, "roll back to last bootable configuration" works. I've used W 3.11 on up and this OS is driving me nuts right now. First BSOD I had to reset the CMOS to fix a "hardware" issue that would not let it boot into windows. But, that's SOFTWARE.
Then, it seemed to not keep time right, so I shut down and removed power, replaced the CMOS battery just to be sure and AGAIN it would not boot to windows. I had to roll back the install to the last good configuration to fix this BSOD. So, I have issues all right. I can't tell what so far. It may be a bad mainboard (MSI P55 GD80). It isn't heat as the CPU has never gone above 40C. I hope it was a bad Lithium cell that was corrupting the BIOS. We'll see.
Once it is running, my experience with this hard to operate OS has not been too good compared to XP's super polished user interface. W7 seem text based over visual, as in GRAPHICAL user interface. W7 control panel is awful. There are a lot of good updates, but the interface is not easy to work with quickly. Too busy and too text based interface. I turned off all the AERO stuff as it just gets in my way.
Once I forget how good XP is, I guess I'll learn to live with this OS. But if this OS is like Apple's, leave Apple alone!
View 1 Replies
View Related
Jul 25, 2009
This is a WHQL-Certified driver for GeForce 6, 7, 8, 9, 100, and 200-series desktop GPUs and ION GPUs.
New in Release 190.38 Adds support for OpenGL 3.1 Adds support for CUDA 2.3 for improved performance in GPU Computing applications. See CUDA Zone for more details.
Adds a new user-controlled power management setting for select GeForce 9-series and later graphics cards (cards must already support more than one power state). This option allows users to set a performance level for each DirectX or OpenGL application.
Includes several new control panel features and numerous bug fixes. More information can be found in the release documentation. Users without US English operating systems can select their language and download the International driver here.
Existing Support:
Supports Microsoft’s new DirectX Compute API on Windows 7. Supports single GPU and NVIDIA SLI technology* on DirectX 9, DirectX 10, and OpenGL,including 3-way SLI, Quad SLI, and SLI support on SLI-certified Intel X58-based motherboards. Installs PhysX System Software version 9.09.0428.
Supports NVIDIA PhysX acceleration on a dedicated GeForce graphics card. Use one card for graphics and dedicate a different card for PhysX processing for game-changing physical effects.
View 4 Replies
View Related
Jun 19, 2009
Windows 7 64bit build 7100 RC1 runs flawlessly on my PC. Will I be able to update to the final release, or will I have to do a clean installation?
View 4 Replies
View Related
Feb 28, 2009
I was wondering where nvidia's pre release driver gets stored on the computer so that I don't have to re-download every time!
I want to copy them to my Setups folder, so that I can re use them.
I tried C:WindowsSoftware Distribution but it was not there!
Also, why do I get a WDDM v1.0 driver and not a v1.1?
View 6 Replies
View Related
Oct 26, 2009
I bought a Sony Vaio laptop with Vista and a promised upgrade to Windows 7 when officially released. To jump start, I installed Windows 7 RC Build 7100 from Microsoft over the shipped Vista OS.
I just received the promised Windows 7 upgrade fulfillment from Sony but when I try to install it it tells me that Windows 7 is already installed (duh.)
Is the RC based Windows 7 installation that I've built up over the last few months now junk bits or is there a way to use the serial number on the proof of license sticker on the fulfillment install disk Sony sent me and associate it with my current RC installation to make it legal and avoid any future trouble?
I'd ask Sony but they haven't responded to anything else I've asked about so I'm not sure there are any actual people left in their "service" arm.
View 2 Replies
View Related
May 4, 2012
How to release a lock by ntfs in c drive in windows 7
View 1 Replies
View Related
Nov 27, 2012
I am attempting to install an Autocad release 14 program on Windows 7 Home Premium (x64). My understanding is that I should update to Windows Pro, and use the XP option. Is the XP option compatible with x34? or do I need to get a Pro x34 and do a clean format? I also heard that downloading an Oracle VB binary exe for windows hosts will work. Is this correct?
View 3 Replies
View Related
Apr 24, 2011
Having problems exporting my comcast address book to windows live mail address book,Also tyied exporting address book from plaxo without success, please help!
View 1 Replies
View Related
Dec 31, 2012
i want to change mac address and ip address on acer apire win 7
View 4 Replies
View Related
Oct 3, 2009
I just installed Windows 7 to my Apple iMac (latest generation from Apple) on a Boot Camp partition. The solve PC issues window says I need to update my driver and includes a direct download but I prefer to get the update directly from the source. I think that the GeForce/ION Driver Release 190 is the graphics driver I need.
NVIDIA DRIVERS 190.62 WHQL
When I run the driver test on the nvidia website it says I need the Notebook Release 186 but the 9400 is not listed under supported devices. Again, I'm 99% sure that I need the GeForce/ION Driver Release 190 but I don't want to screw anything up.
View 3 Replies
View Related
Sep 2, 2011
I am using windows 7 64bit in compaq presario CQ61. today i go to cmd and type ipconfig but i can't see my ip adress. insted of showing ip it shows my media state disconnected. i send a picture sample of this.
View 7 Replies
View Related
Sep 19, 2012
I am trying to obtain the ip adderess on a computer. When I go to run type cmd and ipconfig it is giving me media disconnected. I tried typing in ipconfig/all and it gave me media disconnected and said the physical address is 00-24-E8-24-47-40. I don't know what this means or what I need to do. I am trying to get this computer to work on my wireless network but can't.
View 3 Replies
View Related
Oct 11, 2011
I'm looking for a scrollable top links for Chrome.In other words the links just below the address bar so I can place more links and scroll to view them all.I feel like Browsers are going to be a window with tabs and all of us saying "where are our bookmarks?" "Where are our extensions?", "Where is the address bar?" followed by everyone installing older browsers and telling Chrome and FireFox to rethink the browser again because you gone over the deep end.
View 1 Replies
View Related
Jan 26, 2013
find detail of 9694780323
View 4 Replies
View Related
Sep 16, 2011
I'd like to set the IPv4 Address of a VMware workstation to the following listed below:
VMware Workstation
IPv4 Address: 10.10.10.100
Subnet: 255.255.255.0
Host
IPv4 Address: 192.168.1.101
Subnet Mask: 255.255.255.0
How would I go about implementing the change of the IPv4 Address without changing the LAN.
View 2 Replies
View Related
Jan 20, 2012
I have a laptop and netbook on the same home network. A message on the laptop tells me:Windows has detected an IP address conflict. Another computer on this network has the same IP address as this computer.
View 2 Replies
View Related