I have a file on my desktop that is called "Awesome." If I go to the properties, it says the file type is "File (.)" If I try to delete it it says "Could not find this item. It is no longer located in (my desktop directory) Verify the item's location and try again. I looked everywhere and searched this many times but nothing works for me. I think I was trying to save a picture as a jpg or something and somehow this happened.
View 2 Replies
my 6 weeks old acer aspire laptop, win7 - 64bit, has started showing the message "fatal error no language file was found".i cannot get into I/E8 in either normal mode or safe mode. safe mode is good in all other aspects, normal mode is hopeless.the message appears in the middle of the page at the same time desktop opens.
View 9 Replies View RelatedI just recently returned from a trip out of town and found when I tried to boot my computer I had a Grub boot error 15, file not found. I've never heard of grub4dos before I began trying to figure out what was wrong with my computer and found that it is used for dual booting. I run windows 7 ultimate x64 and have never dual booted my machine. While my laptop itself is not password protected, I do require a password to get into windows.
get around the required password to install grub4dos, install linux, then copy my hard-drive, leaving it useless when they're done? If not, is there some other way, a virus or trojan, that could cause windows to fail and revert to grub? I did remove my hard-drive, put it into an external case and try to look at it on another computer. In the disk manager it shows that it's healthy, has 465gb avail and the format is RAW.
I'm trying to run a DOS program (Locoscript 2.51) in XP mode on a Windows 7 Ultimate virtual PC. This doesn't run - with a message 'error writing file(xxxx) path not found'.Program works perfectly in native XP (on a different machine) and the file is in the same place on both.
View 1 Replies View RelatedI have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
I know there are a myriad of slave drive access issue posts on here. My thing is that I've managed to take ownership of my slave drive; formerly in a tower - now trying to access it thru my windows 7 laptop. Ive taken ownership of " my documents," but it doesn't seem like it took; I still have to take ownership of every folder in it individually when I go into it. Furthermore, when I going into my music or video folders - I get a "file not found" error when I try to open the files.
View 1 Replies View Relatedas usual I turned off my laptop and after a while a turned on again to use my laptop but it couldn't reach operating system and showed error : " OPERATING SYSTEM NOT FOUND" !
I tried all instructions to solve the problem and finally run by windows start up CD to re-install new windows. this time I faced error: " No drivers were found. click load driver to provide a mass storage driver for installation"
My system is a dell Studio XPS 435MT running W7. I just replaced the motherboard. Everything is working fine except the Boot is taking forever. It is getting stuck prior to windows loading and saying " PXE-E53" No Boot file found. In my research this has something to with the system trying to boot from the LAN.
View 12 Replies View RelatedMy system is a dell Studio XPS 435MT running W7. I just replaced the motherboard. Everything is working fine except the Boot is taking forever. It is getting stuck prior to windows loading and saying " PXE-E53" No Boot file found. In my research this has something to with the system trying to boot from the LAN.
View 14 Replies View RelatedI'm looking at a Toshiba Satellite L455D with Windows 7 home premium. It's has a hard drive about a year old, which I installed for the person at that time with a new copy of Windows. Now, it hangs at the 'starting windows screen.' Start up repair relays this message:
No OS files found on disk.
Repair action: Partition table repair
Result: Failed error code = 0x490
I had tried booting with the dvd prior to seeing this. When it asked what os i wanted to boot, it did list the current os. The hard drive is listed correctly in the bios, so it is at least being recognized. Start up repair seems to be suggesting that the hard drive is wiped, or bad.
I have been having a problem with my comp that won't connect to the net. I did'n t have firewall but fixed that but still unidentified network error.I have dl'd fixes to restore network/internet connectivity but nothing works I think it might be winsock error.
View 1 Replies View RelatedWhile looking at my Windows files, I cant remember were in windows exactly but I found a AMD file but I am running a Nvidea GPU. Is there any reason for this to be here? I have been having some stability issues occasionally so I wonder if this is it? Some AMD drivers have arrived in my system.
View 2 Replies View RelatedI have an HP Pavillion g7 laptop running windows 7 home premium 64 bit; this message appears every time I start up my computer. I had to restore factory settings within the last 24 hours due to a major crash and an inability for windows to start-up. I want to solve this problem now
View 2 Replies View RelatedWindows 7 64 bitI went to the Microsoft website and reset the hosts file. (I just copied the text on the page that said it was for the Windows 7 hosts) Prior to the hosts reset, the only text in there was 120.0.0.1 localhost. Anyone know what this means? This happened one other time before, so it has to be something.
View 3 Replies View Relatedim getting this error when i importing csv php file to mysql.
View 1 Replies View RelatedI tried to download a PDF but something went wrong during the download and I ended up with a file icon on my desktop without any extension and having 0 bytes. When I try and delete this file icon I get the error message: "Could not find item. This is no longer located in C:UsersMynameDesktop. Verify the item's location and try again". This seems like a contradiction - Windows is showing a file icon on the desktop but then says there is no file there! I have tried searching for a file by that name elsewhere and there is nothing. I have also tried cleaning the reg and doing a disk cleanup. How to delete this useless file icon from my desktop?
View 3 Replies View RelatedI have an issue with my computer - every time it puts its self to sleep (although i disabled sleep mode) my computer refuses to boot. It fails to recognise my boot hdd, untill i take out every other HDD, and then plug them in once its booted. On startup i get an error message 'CPU over temperature. Press f1 to continue...', but this generally does not affect anything. I have literally just reapplied thermal compound to my heatsink and CPU, but still get same error.When playing power intensive games, the system runs fine.BSOD error message: driver_irql_not_less_or_equal, researched and found nothing of use, dump file size of 0kb so i can't even debug it.Ram is being read at 800mhz instead of 1066mhz despite changing latencies to 5-5-5-15 and voltage to 2.2v as suggested by kingston.I have scanned for viruses using Avira Free AVG.
Specs:
Asus P5q Pro Turbo - ATX - LGA775
4 x 2gb DDR2 Kingston Hyper-x 1066mhz
Gainward GeForce GTS 250 @1024mb
600w PSU
Intel Core 2 Quad Q6600 @ 2.4mhz.
I have tried updating drivers, but they are all up to date.
After changing my os from linux to Windows 7 , there are a few media files on my external hd that give the error location not found. It's not a big deal about the files as i can replace them, but i would like to be able remove them from the hd as now they are just empty folders, how would i remove them if every time i click on them i just get that error?
View 6 Replies View RelatedRunDLL
There was a problem starting C:Windowsxccdf16_090131a.dll
The specified module could not be found.
OK
That comes up when I start up 7, it happened after I un-installed MaAfee 8-in1 then that came up
I recently had a virus (windows 7 antivirus 2012) and I removed it safely. Now I am having problems opening programs on my system all around and I suspect it is a registry problem. I could open the programs via "Run as administrator" but that is a huge hassle (my user account has administrator privileges.) Another thing is when I try to open the program and it has the "select from one of the following to open" window, usually when i select a program to open it with there's a bottom check box for "always use selected..." but that is grayed out... not sure what is happening.I tried to create a new user and that new user can open programs fine.
View 5 Replies View RelatedWhen I log into my computer, I get the following error message " There was a problem starting C:UsersOl-Scurt-DoggAppDataLocaluictaner.dll The specific module could not be found. ". I have searched and searched and searched for this error with no success except for registry cleaners/fixers that of course require my credit card to do the full fix.I do understand what the DLL is and what it does but also know how critical it is to be exact when dealing with the registry. Can anyone give me a straight forward resolution for this issue?
View 3 Replies View RelatedI have this error message when trying to play certain games like Puzzle Quest or Fishdom2...I have tried removing and reinstalling, but to no avail.
View 14 Replies View RelatedI have a Lenovo T61 running Windows 7 ultimate x32. Every time I plug a new USB device in I get 'no driver found' and it won't install, even if pointed to manufacturer drivers. I've updated windows and all the lenovo software/drivers...
View 2 Replies View RelatedI recently had a virus-esque program on my computer called win 7 home security 2011. It was a fake anti-virus program that was telling me I had viruses in an attempt to get me to buy their fake product. Anyway, the program is now history but I am encountering more problems that may or may not be a side effect of the virus. When I try to open an application I get an error giving the file location of the application followed by the message "Application not found". I can get around this and open the application by following the file location given by the error message and opening it. It then forces me to choose which program to open it with, in which case I need to tell it to open it with itself...
This is very irritating and in many cases makes opening applications close to impossible. When I'm choosing the program to open it with, it won't allow me to check the box telling it to set the program as the default. Is there any way to solve this issue short of completely re-installing windows 7?
I own an Asus K61IC laptop (Pentium dual-core processor 2.7 Ghz) which runs Windows 7 Home Premium (pre-installed). A few days ago it started to get stuck during some startups at the welcome screen (preceded by a small hang time between you click the user and the password box comes up). Today the problem became serious after it got stuck again at the first boot-up, and I had to turn it off from the on switch. Finally it successfully start from the second time and when it did I searched in the event logs and found 2 errors which happened during the first boot-up: -Zone alarm could not start because it timed out (I'm not too worried because the second startup showed a similar error with spybot) -The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly. (I copy/paste this from the event log, if you need the hole thing ask for it) I should mention the computer runs avira free and that I checked using the Asus Live Update that the BIOS is up to date.
View 4 Replies View Relatedi have Acer Aspire laptop. For vista.i have installled windows 7 long ago.now i am getting error. while booting.Error like "Disk 0".please anyone can help.and i have tried to install windows 7 again but hard disk is not allowing me to install.
View 1 Replies View RelatedI installed Win 7 and if i try to open my computer of click on desktop and open up screen resolution etc. I get "Explorer.exe -Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item." I did a search but could not find anything related to this error in Win 7. I have found some others attached to Win XP but have to do with the installation of some software which prevents access to explorer.exe. When I boot in safe mode this issue does not appear...
View 9 Replies View RelatedI got a start up error no device drivers found.
View 5 Replies View Relatedi have win 7 64bit and ive installed java se 7 update 4
View 1 Replies View RelatedI keep getting Error code: 0x80070035 The network path was not found error whenever I try to connect to any other computer (running windows 7 ultimate) on my network. I have another computer with windows 7 ultimate that does not have this problem. Firewalls are disabled on all computers.
Computers all ping fine. Can ping by name too. If I try to connect via IP address, I get Error Code: Error0x80004005 Unspecified error
I have a Lenovo p580, last night around 12:30am, I was watching a movie on my laptop and it randomly restarted. When it got past the welcome after a millions of beeps, the screen went black, so i hard rebooted it by holding down the power button. Then when the window sign begins to be created by those dots, about the second dot I got the blue screen of death, which I could not read because it automatically restarted and then i went into start up repair which, couldn't resolve the problem.
I tried booting into safe mode and it wasn't working so I thought it was a problem with the hdd. I realised the hdd area was really hot so I turned off the laptop and let it charge overnight. Now the laptop is working fine, I ran a check disk during startup. However now, after the windows logo I have a very quick error which is something along the lines "autochk program not found, skipping autocheck (not 100% sure if those are the corrects words, but skipping and autochk not found is in it".
I have looked at the registry value for autochk and found this
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
BootExecute REG_MULTI_SZ Autocheck autoch
