DLL Error Specific Module Could Not Be Found

Nov 9, 2011

When I log into my computer, I get the following error message " There was a problem starting C:UsersOl-Scurt-DoggAppDataLocaluictaner.dll The specific module could not be found. ". I have searched and searched and searched for this error with no success except for registry cleaners/fixers that of course require my credit card to do the full fix.I do understand what the DLL is and what it does but also know how critical it is to be exact when dealing with the registry. Can anyone give me a straight forward resolution for this issue?

View 3 Replies


ADVERTISEMENT

Error: The Specified Module Could Not Be Found

Feb 28, 2009

RunDLL

There was a problem starting C:Windowsxccdf16_090131a.dll

The specified module could not be found.

OK

That comes up when I start up 7, it happened after I un-installed MaAfee 8-in1 then that came up

View 3 Replies View Related

Error Specific Model Not Found St375063 Expected?

Mar 3, 2012

Error specific model not found st375063 expected

View 1 Replies View Related

The Specified Module Could Not Be Found

Sep 24, 2012

Yesterday Norton pops up with some DLL file and it was causing a problem. Norton apparently deletes it and today this popped up.There is a problem starting C:UsersAdamAppDataLocalCRE/CrashDumpsdmwjuxb.dll The Specified module could not be found

View 1 Replies View Related

Specified Module Could Not Be Found

Mar 29, 2012

'There was a problem starting msizqh32.dll..The specified module could not be found'.I have searched the web and the file msizqh32.dll has not come up in Google.I am not sure even what this file is for, whether part of a driver or the operating system or something else.I am hoping to find the file and replace it in its proper place to avoid the message in future, and secure the system, but can not find the file. Even dsl-files.com did not have it.

View 5 Replies View Related

AppData Module Cannot Be Found

Jun 18, 2011

I am using Windows 7, 64-bit computer. Recently, I observe the following message at start up: 'Users'Name of User'AppDataLocalinfcprtp.dll' specified module not found. The computer appears to be functioning well otherwise. It is just that I have to cancel this message at evey start up.

View 2 Replies View Related

"the Module Bthserv.dll Was Loaded But The Entry-point Dllregisterserver Was Not Found"

Apr 4, 2011

I am trying to register bthserv.dll in my registry as the bluetooth support service is missing from my services.msc; Dont ask how that happened!when running the command regsvr32 bthserv.dll im getting the error message;"the module bthserv.dll was loaded but the entry-point dllregisterserver was not found"I have also run sfc /scannow, and all is good.Im running Win 7 64bit SP1.

View 9 Replies View Related

No Module Named Win32event (Error Code:1)

Jul 16, 2011

i have been trying to load Calibre and ebook manager and get this msg

Python function terminated unexpectedly No module named win32event (Error Code:1)

The program was working ok then this error started showing up ? Did i delete a file by mistake?

View 1 Replies View Related

Platform Error: Module Failed To Initialize

Dec 1, 2009

I get the error:

Platform Error: module fail to initialize

How can I fix this?

(I'm running Windows 7 64 - Bit if that has anything to do with it)

(CSS worked fine n Windows 7 32 bit! )

View 2 Replies View Related

WLAN Extensibility Module Has Stopped - Error In Event Viewer

Apr 17, 2011

I'm having problems connecting some devices (android apps) to my computer via my wi-fi. I am usually able to solve the problem by running network diagnostics, but after awhile, I'll start having network connectivity problems again.

Whenever I run diagnostics in these situations, this error is shown in Event Viewer:
"WLAN Extensibility Module has stopped.
Module Path: C:\Windows\system32\athihvs."

I also receive the error (in event viewer) on a fairly regular basis:
"Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x2225D3CC6415. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server."

I have checked, and my router and WLAN card drivers are both up to date. I'm wondering if these errors are what is causing my app to lose connection?

View 4 Replies View Related

HP Integrated Bluetooth Module Shows Error In Installation Code 10

Jan 12, 2012

HP integrated Bluetooth module shows error in installation code 10. my operating system is windows 7

View 1 Replies View Related

Operating System Not Found And No Drivers Were Found Error

Sep 14, 2012

as usual I turned off my laptop and after a while a turned on again to use my laptop but it couldn't reach operating system and showed error : " OPERATING SYSTEM NOT FOUND" !

I tried all instructions to solve the problem and finally run by windows start up CD to re-install new windows. this time I faced error: " No drivers were found. click load driver to provide a mass storage driver for installation"

View 1 Replies View Related

File Not Found Error

Dec 16, 2011

I have a file on my desktop that is called "Awesome." If I go to the properties, it says the file type is "File (.)" If I try to delete it it says "Could not find this item. It is no longer located in (my desktop directory) Verify the item's location and try again. I looked everywhere and searched this many times but nothing works for me. I think I was trying to save a picture as a jpg or something and somehow this happened.

View 2 Replies View Related

Location Not Found Error

Jan 15, 2013

After changing my os from linux to Windows 7 , there are a few media files on my external hd that give the error location not found. It's not a big deal about the files as i can replace them, but i would like to be able remove them from the hd as now they are just empty folders, how would i remove them if every time i click on them i just get that error?

View 6 Replies View Related

Application Not Found Error

Dec 6, 2011

I recently had a virus (windows 7 antivirus 2012) and I removed it safely. Now I am having problems opening programs on my system all around and I suspect it is a registry problem. I could open the programs via "Run as administrator" but that is a huge hassle (my user account has administrator privileges.) Another thing is when I try to open the program and it has the "select from one of the following to open" window, usually when i select a program to open it with there's a bottom check box for "always use selected..." but that is grayed out... not sure what is happening.I tried to create a new user and that new user can open programs fine.

View 5 Replies View Related

How To Fix Error Message DMI32.dll Not Found

Aug 30, 2011

I have this error message when trying to play certain games like Puzzle Quest or Fishdom2...I have tried removing and reinstalling, but to no avail.

View 14 Replies View Related

No Driver Found Error For Every New USB Peripheral

Sep 22, 2011

I have a Lenovo T61 running Windows 7 ultimate x32. Every time I plug a new USB device in I get 'no driver found' and it won't install, even if pointed to manufacturer drivers. I've updated windows and all the lenovo software/drivers...

View 2 Replies View Related

Windows 7 Application Not Found Error

Apr 23, 2011

I recently had a virus-esque program on my computer called win 7 home security 2011. It was a fake anti-virus program that was telling me I had viruses in an attempt to get me to buy their fake product. Anyway, the program is now history but I am encountering more problems that may or may not be a side effect of the virus. When I try to open an application I get an error giving the file location of the application followed by the message "Application not found". I can get around this and open the application by following the file location given by the error message and opening it. It then forces me to choose which program to open it with, in which case I need to tell it to open it with itself...

This is very irritating and in many cases makes opening applications close to impossible. When I'm choosing the program to open it with, it won't allow me to check the box telling it to set the program as the default. Is there any way to solve this issue short of completely re-installing windows 7?

View 6 Replies View Related

Stuck At Welcome Screen And Found An Error

Aug 13, 2011

I own an Asus K61IC laptop (Pentium dual-core processor 2.7 Ghz) which runs Windows 7 Home Premium (pre-installed). A few days ago it started to get stuck during some startups at the welcome screen (preceded by a small hang time between you click the user and the password box comes up). Today the problem became serious after it got stuck again at the first boot-up, and I had to turn it off from the on switch. Finally it successfully start from the second time and when it did I searched in the event logs and found 2 errors which happened during the first boot-up: -Zone alarm could not start because it timed out (I'm not too worried because the second startup showed a similar error with spybot) -The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly. (I copy/paste this from the event log, if you need the hole thing ask for it) I should mention the computer runs avira free and that I checked using the Asus Live Update that the BIOS is up to date.

View 4 Replies View Related

Getting Error Hdd Not Found While Booting For Windows 7

May 17, 2012

i have Acer Aspire laptop. For vista.i have installled windows 7 long ago.now i am getting error. while booting.Error like "Disk 0".please anyone can help.and i have tried to install windows 7 again but hard disk is not allowing me to install.

View 1 Replies View Related

Fatal Error No Language File Was Found

Nov 19, 2011

my 6 weeks old acer aspire laptop, win7 - 64bit, has started showing the message "fatal error no language file was found".i cannot get into I/E8 in either normal mode or safe mode. safe mode is good in all other aspects, normal mode is hopeless.the message appears in the middle of the page at the same time desktop opens.

View 9 Replies View Related

Startup Error - No Device Drivers Found

Feb 7, 2013

I got a start up error no device drivers found.

View 5 Replies View Related

Grub Boot Error 15, File Not Found

Jul 23, 2012

I just recently returned from a trip out of town and found when I tried to boot my computer I had a Grub boot error 15, file not found. I've never heard of grub4dos before I began trying to figure out what was wrong with my computer and found that it is used for dual booting. I run windows 7 ultimate x64 and have never dual booted my machine. While my laptop itself is not password protected, I do require a password to get into windows.

get around the required password to install grub4dos, install linux, then copy my hard-drive, leaving it useless when they're done? If not, is there some other way, a virus or trojan, that could cause windows to fail and revert to grub? I did remove my hard-drive, put it into an external case and try to look at it on another computer. In the disk manager it shows that it's healthy, has 465gb avail and the format is RAW.

View 9 Replies View Related

Java JRE Gets This Error: Class Not Found Exeption

May 28, 2012

i have win 7 64bit and ive installed java se 7 update 4

View 1 Replies View Related

Error 'code: 0x80070035 The Network Path Was Not Found

Nov 26, 2009

I keep getting Error code: 0x80070035 The network path was not found error whenever I try to connect to any other computer (running windows 7 ultimate) on my network. I have another computer with windows 7 ultimate that does not have this problem. Firewalls are disabled on all computers.

Computers all ping fine. Can ping by name too. If I try to connect via IP address, I get Error Code: Error0x80004005 Unspecified error

View 4 Replies View Related

Autochk Program Not Found Error After Windows 7 Logo

Aug 25, 2012

I have a Lenovo p580, last night around 12:30am, I was watching a movie on my laptop and it randomly restarted. When it got past the welcome after a millions of beeps, the screen went black, so i hard rebooted it by holding down the power button. Then when the window sign begins to be created by those dots, about the second dot I got the blue screen of death, which I could not read because it automatically restarted and then i went into start up repair which, couldn't resolve the problem.

I tried booting into safe mode and it wasn't working so I thought it was a problem with the hdd. I realised the hdd area was really hot so I turned off the laptop and let it charge overnight. Now the laptop is working fine, I ran a check disk during startup. However now, after the windows logo I have a very quick error which is something along the lines "autochk program not found, skipping autocheck (not 100% sure if those are the corrects words, but skipping and autochk not found is in it".

I have looked at the registry value for autochk and found this
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
BootExecute REG_MULTI_SZ Autocheck autoch

View 14 Replies View Related

Service Error: Volume/disk Not Connected Or Not Found

Feb 28, 2011

I've just used Windows Update to install SP1 on two more or less identical computers with Windows 7 Home Premium 64-bit. On one of the computers only the following error and warning are showing in the event viewer, from around the time the actual installation started (ie immediately after the download completed):Error - Source VSS, Event ID 12305 Task Category None:Volume Shadow Copy Service error: Volume/disk not connected or not found. Error context: DeviceIoControl(\?GLOBALROOTDeviceHarddiskVolumeShadowCopy18 - 000000000.....). Operation:Processing PostFinalCommitSnapshotsContext: Execution Context: System Provider________Warning - Source Ntfs Event ID 57 Task Category (2)The system failed to flush data to the transaction log.Corruption may occur.(end of messages)Both messages showed exactly the same time. System restore shows that a restore point was created at the same time, which suggests that it did manage to create a restore point despite the error.I tried restarting the computer, and it didn't try to run chkdsk (which I would expect it to do if there were any disk errors, and which has been mentioned on other forums). Disk management shows all disks and partitions to be healthy (before and after the restart).

View 4 Replies View Related

Operating System Not Found Error On Startup (windows 7)

Feb 1, 2012

i have sony viao laptop, when i start my pc it shows the following error " operating system not found "when i opened bios menu, it doesnt detectes the hard drive n says " no drive ".hv my hard disk crashed ?

View 1 Replies View Related

Multiple Drives Cause 'no Active Partition Found' Error

Sep 18, 2012

I have had my system up and running with Windows 7 for at least four or five months. I have four drives in an mATX case. Yesterday, while it was idle, I saw it flash a BSOD and then rebooted. when it restated it displayed the following Error: "No active partition found. Reboot your computer." Which I did several times to no avail. Next, I used the install disk to try to "repair" the partition...seven or ten times, no luck. Also, no drives were listed in the window at repair prompt. So, I pulled all the cables on all the drives but the one containing the system and voilas! here I am writing to you without issue and without three of my drives. I have two other sata drives in addition to my system sata drive. one IDE drive on the system.

View 3 Replies View Related

Network Path Not Found - Error Code 0x80070035

Jan 20, 2009

Ok, I have a laptop and a desktop. Desktop is currently running 7 x64 and laptop is running 7 x86.

Few weeks ago I was able to access my LAPTOP from my DESKTOP normally by using the Network in the explorer. I was prompted to key in my Username and Password of my LAPTOP and I gained access after.

Now, I have no idea what happened to my DESKTOP. I am able to access other computers but not my LAPTOP. It keeps stating Network path not found with error code 0x80070035. Troubleshooting indicates no problems found.

I do dual-boot with Vista x64 on my DESKTOP and I am able to gain access to my LAPTOP using Vista.

One of the workaround I got for Windows 7 is to create HomeGroup and use my LAPTOP to join it and I can gain access to Network after that.

So, is this a HomeGroup bug and any fix for it?

EDIT: Never mind, I just re-create my password on my laptop and it's fine now. So, it's really weird.

View 1 Replies View Related

XP Mode Error Writing File Path Not Found?

Apr 28, 2011

I'm trying to run a DOS program (Locoscript 2.51) in XP mode on a Windows 7 Ultimate virtual PC. This doesn't run - with a message 'error writing file(xxxx) path not found'.Program works perfectly in native XP (on a different machine) and the file is in the same place on both.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved