Computer Won't Boot To Windows
Feb 10, 2012My computer will come on but will not go into windows
View 2 Replies
ADVERTISEMENT
Whenever Boot Up Computer It Shows Advent Logo-screen / Where Can Access Boot Menu
May 7, 2012I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies View RelatedWindows 7 Computer Does Not Boot
Sep 29, 2012My Dell laptop with Win 7 home premium crashed and will not boot to the hard drive or system disc. I tried to reinstall Win 7 from the system disc and it apparently did install to a different partition as it now shows two W7 programs on the drive. However when I get to the part where the installation is complete and the program reboots I get only a black screen with a small blinking curser in the upper left of the display. This is exactly what I had prior to reinstalling W7. Shutting down and restarting all I get is the black screen and the curser on the left top. It does not respond to the keyboard or mouse. Win 7 system disc does not give the option to fromat the HD and reinstall. Yes, I did tell the machine to boot to the CD.
View 3 Replies View RelatedComputer Will Not Boot To Windows 7?
Jun 12, 2011I installed windows 7 onto a 500GB SATA HDD and after the installation completed and the computer restarted, it takes us to a screen that says "Verifying DMI Pool Data...............DISK BOOT FAILURE INSERT SYSTEM DISK AND PRESS ENTER"The funny part is, when we put another HDD in the computer with an installation of windows on it, IN ADDITION to the one in question, it brings us to a dual boot OS selection, letting us select the Windows installation in question, and access without an issueWhy will this installation not simply boot when that HDD is the only one installed?
View 1 Replies View RelatedComputer Won't Boot Windows 7
Sep 17, 2012I am having an issue with my Windows 7 64 bit laptop. I did an update and pressed the �restart now� to let the changes take effect, when it restarted it got to the �starting windows� screen but it stopped there for a while then flashed a blue screen quickly. Then it restarted itself and goes to a menu that says �windows failed to start. A recent hardware or software change might be the cause�� I have two options � Launch Startup repair (recommended)� or �start windows normally�. When I choose the Launch startup repair it says �windows is loading files� and then it shows a black screen with a mouse cursor, I can move the cursor but nothing loads.
View 3 Replies View RelatedComputer Will Not Boot Windows 7?
Aug 23, 2012First off, my computer recently had its motherboard/video card replaced. It is a dell xps l501x. The issues with the colored lines began before the mother board was replaced. Thus, I do not believe a faulty motherboard is the problem.These lines are thin and occur on the top centimeter of the screen. They are made up of many colors and sort of look like squiggles going horizontally across the page. Also my computer will not sleep properly. When the computer is put to sleep the screen will go black, but the fan will continue to run and led backlit keyboard will remain on. They begin immediately after the dell logo comes on. I also get 5 bluegreen dots appear in the top left hand corner of the screen.
The lines do not always appear, its is sort of hit or miss with my computer.I have performed a system restore and and wiped the hard drive. This did not remedy either of the situations. I am not sure how to proceed as it cannot be the motherboard or hard drive.
New ACER Windows 7 Computer Won't Boot
Sep 11, 2011I just bought a new ACER laptop, Win 7, around 2 weeks ago. I have only downloaded Minecraft and Microsoft Office on it..... Today I turned on my laptop and it showed the ACER logo, and froze with the loading bar 3/4s full. So I rebooted because I couldnt think of anything better to do.... and same thing, except it froze again, at 1/2 loading bar. So, getting frustrated, I rebooted a 3rd time, and pressed F2 for setup. Once again. Frozen. In resisting the temptation of picking up the laptop and tossing it at the nearest wall, I put in a freshly, properly burnt, Ubuntu LiveCD in. And it didn't even run that.
View 2 Replies View RelatedWindows 7 Just Turned Off - Computer Won't Boot
Apr 11, 2012Windows 7 just turned off and now it won't boot not even in safe mode. I need a recovery disk or something.
View 9 Replies View RelatedChanged Windows 7 Computer Name; Now Won't Boot At All?
Oct 29, 2012I was working on setting up a PC for network usage with the understanding that it hadn't been used muchpreviously.Unfortunately I found that it had a PC name already existing on the network and went to change the PC name and IP address as needed for a static IP environmentHowever, after selecting to "restart" the system never rebooted up and I cannot seem to access the CD drive to place a restore CD or basically do anything with the PC.Any ideas on what happened?I've unplugged the computer and waited a few seconds to plug it in.Once replugged it returns to having the basic lights on it blink about once every few second and appears to be otherwise disabled.
View 1 Replies View RelatedComputer Won't Boot To Windows 7 With SSD Drive?
Jun 6, 2010I cloned my Laptop HDD (120Gb) via Acronis to a 120Gb SSD (Kingston). I checked the SSD after cloning and all the files seem to be there. I replaced the HDD with the SSD and I get a WIndows 7 message Status:0xc000000e and Info: The boot selection failed because a required device is inaccessible.I went to BIOS setup and the Kingston drive was listed as No2 after DVD/CD drive as boot drive. I moved it to No 1 position and tried again. Same result. I googled the issue and others seem to have problems with SSD drive replacements.ANyone got an answer
View 9 Replies View RelatedDon't Want To Have Two Boot Drives Of Windows 7 On The Same Computer?
Jun 24, 2012Need to do Win 7 install on 50 gb partition and keep my 200+ win 7 install intact but don't want to use it as a boot and dont want to delete it just to get rid of Windows and boot. I want to use it just as a data drive. Dont want to have to activate the new small drive.
View 9 Replies View RelatedWindows 7 64-bit Upgrade Computer Won't Boot?
May 18, 2011I have used windows 7 for some time now and am qjuite happy, however.I just recently upgraded to the latest verson and now my HP tablet 64 bit amd turion wont boot.
View 1 Replies View RelatedWindows 7 Image Won't Boot Up On Different Computer
Sep 28, 2011I had a system with programs I have installed and the setup and imaged it with acronis or for any matter, it could have been a perfect clone drive copy because the program isnt the issue. My i5 - 2500k achi windows 7 was imaged to a new hard drive and attempted to run on a AMD Phenom 4x 9500.Now before you go telling me about the three hard drive modes, Raid , IDE and ACHI. I've edited the registry and have tested all three modes to correspond with the motherboard bios setting of the drive. I assume its IDE or ACHI, which I've tried loading windows on the orginal machine, editing the registry settings, then trying it again on another machine.Where I am at now is it goes to classpnp.sys when im watching safe mode and stalls there. Im noticing before it was stalling at disk.sys but i think i fixed that via the registry settings for the hard drive mode.Tried to make a generalized image by using sysprep got the error fatal error because i guess its used more than three times, dont understand what disarm command they are talking about for workaround since the xml file doesnt exist.
I have tried ACRONIS 2011 Image with Universal Settings mode (that is supposed to remove hard ware specific settings)I have also tried using the windows disc, going into launchup repair, repair startup.I also went recovery console, then tried renaming classpnp.sys to classpnp.old.I tried several options using the Ultimate Boot disk but its not the boot up mbr as it boots up , its the loading of one of the system files/drivers that make it fail.The reason why im trying to just clone one hard drive and put it on another system is because, everything is installed, the programs, etc. Its saving me god bloody 2 days with setting up the programs, although Im getting close to over a day trying to figure out whats the big dela with getting this to work on another computer.additional information : I do not need any user specific preferences, documents, files or settings, everything can go, i just want this installation with about 25 gig of programs, to load and work.If you know of a program thats fairly easy to use considering im already one day into doing this, then let me know and tell me what im looking to do and some instructions are great.Either way, im waiting for an answer, will be here next 3 hours.im on skype as well, this user name is spelt backwards for security reasons.
Can't Get Computer To Boot From The Windows 7 Disc
May 19, 2012Can't get past the windows did not shut down properly window where you do the rcommended rpair. It does not do anything but try to rpair.
View 1 Replies View RelatedComputer Wont Boot Windows 7
Jul 20, 2012I have a boot problem with booting windows 7. I'm not entirely sure if this is the right section in the forums but its pretty dang close i think.
View 3 Replies View RelatedComputer Won't Boot To Windows With SSD Drive
Oct 21, 2012I cloned my Laptop HDD (120Gb) via Acronis to a 120Gb SSD (Kingston). I checked the SSD after cloning and all the files seem to be there. I replaced the HDD with the SSD and I get a WIndows 7 message Status:0xc000000e and Info: The boot selection failed because a required device is inaccessible.
I went to BIOS setup and the Kingston drive was listed as No2 after DVD/CD drive as boot drive. I moved it to No 1 position and tried again. Same result. I googled the issue and others seem to have problems with SSD drive replacements.
Windows 7 Slow Boot On New Computer
Apr 27, 2010My brother just purchased a new computer. I recommended all the components, and assembled it all. I installed Windows 7 64 bit professional, all the drivers, performed all the updates, and started to install stuff, mainly Kaspersky 2010 and Office 2007 Enterprise. Everything is up to date, yet the computer is booting slowly now, Kaspersky won't load and there is no internet, when the connection is well made and all. Basically, the computer freezes when it reaches the desktop. [code]
View 4 Replies View RelatedWindows Explorer Crashing, Computer Won't Boot?
Aug 2, 2012Over the past couple of days, whenever I open a windows explorer window, it crashes and restarts immediately. I read another forum that told me to copy windows explorer from C:/Windows to C:/Windows/System32. Since windows explorer kept crashing, I tried to boot in safe mode, but it got stuck on the "loading files" screen. I shut it down and tried to boot Ubuntu, but it also got stuck. Now my computer won't boot at all.
View 1 Replies View RelatedComputer Shuts Off After Boot But Before Windows 7 Screen
Jan 27, 2013I use Windows 7 Ultimate, 64 bit, with Intel Core2 Quad Q6600 and 8192 Ram on an ASUSP5w DH Deluxe MB. No overclocking. Yesterday, I logged on to MS to check out Win8 and allowed it to check my system for upgrade. I received report that some programs were not compatible and that "NX" was not activated. I decided to check some of the incompatible programs out and read up on "NX".
So I closed all my programs out and rebooted and checked out my setup. I found no reference to "NX", but I did enable the MB to manage my fans, which I have not done in the past. Then, F10 and automatic reboot. It went through the rebooting, recognized the ram, but when it came to the point that Win 7 would begin, it powers down shuts off, with out the Windows screen opening.
I went back into setup and disable the the option about the MB operating the fans, rebooted and it shuts down again. I start the power and boot up and checked the setup and all looks like it usually does. I tried f8 at difference times, but the computer will not continue past the last post of recognizing all my ram.
I went inside the computer and checked the connections on the boot drive and just about everything else. The fans start up, power light is on on the board. The temperatures, as measured in the set up are well within normal range. None of the components seem hot. I let it set overnight and it still shuts off after the screen about the RAM and before starting Win 7.
Computer Freezes During Boot, And During Windows 7 Install?
Sep 3, 2010I when I went over to my desktop after getting up this morning I found that it didn't react to me moving the mouse, and the screen stayed black even when I turned it on. I turned it off, then back on. It froze during the windows boot screen (black screen + logo ) It kept doing that. Tried System Restore, it froze during that too.On Windows 7 install it freezes during the Expanding phase at random points.What I've tried:Installing on another harddrive. (same result)Windows Restore Memory Diagnostic (no Errors)Chkdsk (not /r the short version, will have to make a boot cd to do that)
View 4 Replies View RelatedComputer Fails To Boot Into Windows After Sp1 Installation
Mar 10, 2011i've had some issues installing sp1 (7 ultimate, latest windows updates) via windows update when the installation fails on a few different error codes, but i have gotten it to install a few times. each time the installation finishes, i restart the computer when prompted and it goes through the update process when shutting down, then after the windows 7 splash screen ("starting windows") passes, the screen goes blank (black screen, no video- monitor displays "going to sleep" message) and the HDD light on the computer is lit solid. i've left the computer sitting for hours with no change- i eventually get Windows to boot again by using the install disc to do a Windows restore, but i haven't been able to get past this yet.
View 6 Replies View RelatedWindows 7 Will Not Boot, Computer Did Not Come With A Install Disk?
Mar 26, 2011My mom's computer started having issues booting a day ago, it seemed like something was draining all of her cpu's power. I verified that was not the case, and ran the computer in safe-mode. I downloaded Ccleaner and cleaned her registry with it (Yes, I verified that the registry values it removed/modified were safe, most of the having to do with programs I know were removed from the computer.) After a re-booting it appears the BCD has gone corruptit would be an easy fix, but her computer, (Bought at the store in a IVY Tech college.) did not come with a windows install disk, so repairing the BCD has proven difficult. Is there any other way I can do it? (I did ensure she made some recovery disk's when she bought it, but as far as I call tell, all they can do is fully restore windows.)
View 2 Replies View RelatedComputer Hung On Boot With Windows Logo?
Oct 23, 2011I installed a raid combo card with sata and ide and also hooked up two ide drives
now boot never finishes even if i boot with a backup drive or from a win pe dvd i have set bios back to defaults and still will not boot
Cannot Boot Hard Disk With Windows 7 In A Different Computer?
Nov 21, 2012My computer had a problem with the Board so I am trying to boot the hard disk (the O.S is Windows 7) in a diferent computer but when it Shows the Welcolme Screen I always get blue screen. The other computer is a diferent model but I had done this before With Windows XP and it Worked with some drivers problems but It worked.
View 5 Replies View RelatedWindows Could Not Change Computer's Boot Configuration
Jan 29, 2012I just built a new PC and currently trying to install windows 7 64 bit Home ed for the first time. It gets pretty far into the install but errors out stating that "Windows could not change the computer's boot configuration." My BIOS has the latest version (Asus P8Z68/PRO/Gen3). I don't have any RAID set up, just a simple 64 GB SSD.
View 3 Replies View RelatedWindows Could Not Prepare Computer To Boot Into Next Phase Of Installation
Aug 13, 2012Like 3 weeks ago the smarthdd malware affected my computer. The one where all your icons, files, etc. are hidden, gives you bogus security alerts, and then turns off the PC. Using support from the web with Rkill, MalwareBytes, and Hitman Pro. I eliminated the problem. While I thought I had recovered the computer I was wrong. Probably a day later I notice regedit would start when the computer was started and a few seconds later the computer would turn off. After turning on the computer a few times, the problem was gone. MSE is turned off. I tried to turn it on but it wouldn't turn on, saying the system needed to restart.
I also notices the computer would notify that Windows Update was also turned off and can't turn it on or download any updates (error: windows update cannot currently check for update, because the service is not running. You may need to restart the computer). Also, when I click the Nvidia settings icon, the computer does not detect video graphics hardware. I checked around a forum and I saw someone having the same problem and was advised to set BITS service and Windows Update service to start automatic. But when I check the services.msc, those services are gone. Also, I noticed that in the Device Manager, in System Devices, 2nd Generation Intel Core processor family PCI Express controller - 0101 has a yellow triangle sign on it.
On properties, it has this status: "Windows cannot initialize the device driver for this hardware. (Code 37)". So I try uninstalling MSE and installing it again, but the problem persist there. I run several scans with different anti-virus/malare and while I do find a few malwares, fixing/deleting/quarantined them haven't solved the problem. Yet, one antivirus (eset nod) wouldn't install, after many tries when it got to a driver install stage. I also try windows fix it, but nothing was solved. Also tried kapersky TDSSkiller, and nothing was solved (though when initializing, it gives an error saying that 'Can't load driver", yet it continues initializing).
So then I tried chkdsk /r in the command prompt, but it throws off an error in the second stage, restarting the scan again continuously until I decide to skip the scan. Finally I decided I had enough and tried a repair install, but after the stage where it check the programs and settings, I get the error "windows could not prepare the computer to boot into the next phase of installation". Then out of resignation I tried doing a clean install, but it gives me the same error. Later ran sfc /scannow on command prompt, and the log said that it couldn't repair DDORes.dll. So then what I did was replace DDORes.dll with one from installation disk.
Nothing was solved, and sfc scan still gives me that DDORes.dll is corrupted and can't be repaired. Later I tried upgrading the Intel graphics driver and the Intel Display Audio Driver. After rebooting the resolution of the laptop changed from 1366 X 768 to 800 X 600 as default, and now i can't increase it over 1024 X 768. Device manager shows that now both the Intel HD Graphics 3000 and Intel Display Audio cannot start due to error: "Windows cannot initialize the device driver for this hardware. (Code 37)" Or any way to at least clean install the OS so I can get rid of this problems?
Computer Locked - Windows 7 Won't Boot Up After Hard Shut Down
Mar 1, 2011I was waking up one morning to get a quiz done before my Computer Science class. I like to think I'm pretty proficient. But when my computer was going really slow, and eventually locked up, I was forced to do a hard shutdown. Unfortunately, when I went to load it up, it loaded the BIOS, and then it goes to load Windows and poof. Starting windows pops up, but the windows icon never pops up. After about 5-10 minutes, my computer will restart.
Alright, so the first general action is to boot into Safe Mode, but this doesn't work either. I try to boot it up and the greyish screen with "Loading Windows Files." at the top and "Please Wait..." at the bottom. It stops there. Nothing loads up, it just stops. So, I hard reset it again, and THIS time, it says " Startup Repair. " So, I think to myself, this should fix the problem. I load up the startup repair. Loading Windows Files works, then it looks like its loading up and then BAM!
Black screen with a white cursor. SO! I have read up on this error quite a bit, but unfortunately, most of them happen before log in. They say to Ctr+Alt+Del into task manager. I don't have that option because the ctrl alt del doesn't work. So, I break down and try and load up the recovery console from my USB drive that I have on boot. All that does is mimic trying to do startup repair.
Performance
PROCESSOR
Intel Core i7-740QM processor
OPERATING SYSTEM
Genuine Windows 7 Home Premium (64-bit)
GRAPHICS ENGINE
NVIDIA GeForce 310M
GRAPHICS MEMORY*
2270MB total: 512MB GDDR3 discrete memory + up to 1758MB shared memory w/NVIDIA TurboCache technology
Memory and Storage
MEMORY*
4GB DDR3 memory
HARD DRIVE*
640GB HDD (5400rpm)
OPTICAL DRIVE*
DVD-SuperMulti (+/-R double layer) with Labelflash drive
Audio and Video
DISPLAY SIZE
16.0" widescreen
DISPLAY TYPE*
HD TruBrite - LED Backlit display
DISPLAY RESOLUTION
Supports 720p content, 16:9 aspect ratio, 1366x768 (HD)
AUDIO
Harman/kardon - stereo speakers, Headphone jack (stereo), Microphone jack (mono), Built-in microphone
Windows 7 Will Not Boot - Startup Cannot Repair This Computer Automatically
Apr 7, 2011I have a toshiba laptop that runs windows 7 32bit home premium and it is not booting properly. When I turn it on t will show the microsoft logo and says "starting windows" but never gets past that point. I have tried all the fixes to no avail including, safe mode (will not boot into safe mode..starts to load but stops at drivers/atipcie.sys and sits there for a minute or two and goes to the repair startup recommended screen. I have tried startup repair and done it many times because I have read it can take several times (it says "startup repair cannot repair this computer automatically") I have tried the windows repair disc using system restore but it says no restore points found, even though i know they are on my computer. All of my school files are on this computer and while I have some of there backed up on a external hard drive there are some more recent files that are not. What can I try without a clean install to try and repair this?
View 2 Replies View RelatedWindows 7 Boot Partition Deleted - How To Transfer From Another Computer
Mar 29, 2012Well as you know kids play on the computer and so, my partition from which windows 7 boots got formated and cleaned out however there is another computer that is the exact same as that one, is there any way I can extract the partition from that computer and turn it into an ISO place it on a bootable USB disk and boot from it?
View 5 Replies View RelatedComputer Crashed During Game, Cannot Boot Into Windows Anymore
Jul 9, 2012I recently bought a new power supply, along with more ram because I was already ordering the power supply. When the package came and I set everything up in the computer, the PC turned on and everything was fine. I started to play a game with my friend and the computer just turned off. No error message, nothing. I believe the computer overheated, but I could be completely wrong. Now, when I start my computer up, it gets to the Launch System Repair (Recommended) or Start Windows Normally. If I select one of them, it will get into the 'Starting Windows' screen with the orbs, and then the monitor will just go blank. The computer still runs in the background, but my monitor just is blank. It is not the RAM (I switched and went to my old RAM) And I also cannot boot into safe mode, or anything of the sort, as the same thing happens. And I cannot boot from a CD (Tried with a windows 7 repair disc and computer goes blank again)
View 9 Replies View RelatedCan't Get Computer To Boot / Not Allow To Enter BIOS - Windows 7 64bit
Dec 28, 2011My friend recently gave me his HP desktop to take a look at. It came with phenom II quad core processor, 8gb of ddr3 ram, a 1.0 TB WD sata hdd, an integrated geforce nvidia 9100 graphics card, and a 300W psu. When I first turned it on, it booted up to the HP logo and froze there not allowing me to enter the BIOS. After resetting the BIOS I was able to get a slight way into the Windows 7 installation. I tried hooking up the hdd as an external to another desktop and it seemed to be working fine.
I deleted all partitions and reformatted it and tried again, same issue. I've tried with a second hard drive, which i know works, and it also gave the same freezing problem. I've also tried using a different psu which got me a little further into the installation but eventually froze and gave me 0x00000e9 hardware error. With no hard drive at all, it can boot a few times but will eventually freeze up at the logo screen, which led me to believe it might be an overheating problem.
I applied thermal paste to both the cpu and gpu heatsinks and on the first boot it froze during installation with the next few resulting in the same logo screen freeze. I've also realized the gpu heatsink is extremely hot to the touch and at one point, after numerous reboots, the display wouldn't even show. I don't wanna jump to the conclusion that the gpu is fried and buy a new motherboard without consulting anyone.