I just built a new PC and currently trying to install windows 7 64 bit Home ed for the first time. It gets pretty far into the install but errors out stating that "Windows could not change the computer's boot configuration." My BIOS has the latest version (Asus P8Z68/PRO/Gen3). I don't have any RAID set up, just a simple 64 GB SSD.
View 3 RepliesI downloaded the RC from the microsoft site. While attempting to install every is good and going well and I am doing an custom install which is supposed to be a clean install. I get really far in after expanding files and a couple reboots and while completing the installation near the end i receive the error:
Windows could not change the boot configuration. Windows installation cannot continue.
I have looked around for the answer and it requires you to go into registry and change some things. However I can no longer get back into the orginal OS because I choose to do a clean install rather than an upgrade. Cause I felt this would be the best option for me. I just bought a new hard drive hopeing it will fix the problem but I would rather not use it.
is there any way to fix this problem without a new harddrive? And is there a way to wipe the hard drive for a true clean install without being able to get into the OS? Thanks for any help
2.6GHz 64 x2 AMD 5400+
4GB OCz Ram
500GB Seagate Barrcuda Harddrive (new one and old one)
8800 GT x2 SLi
M2N-SLi
I have been having trouble with my computer being slow. After doing a repair install it is better, but it did not correct the "freezing up" part of it. Sometimes I can correct it by just clicking all over the screen and other times to ctrl, alt, del and click on different user, but it is a pain. Any one know why it would be freezing up?
View 9 Replies View Relatedi hope im posting in the right place. For the past 3 weeks my computer has had me so frustrated i dont know what to do. First off it started off just randomly powering off. Which got worse and worse. So we took it apart and made sure everything was clean and dust free etc. Now its not powering off as much but its freezing. Freezing alot. When it freezes you cant do anything. No cntl alt delete, you cant even move the mouse. Its like complete freeze. Also everytime it freezes when i try to restart the computer it hangs in bios about 5 times until finally after restarting it 5 more times i can make it back into windows. It keeps doing it and i have tried almost everything i can think of. I know its not overheating because i have been checking the tempurture of everything on the computer everyday. Everything is running super cool.
[code]...
how can I change my word 2010 to a windows 7 configuration?
View 1 Replies View Relatedhow do I change the configuration settings on Windows 7 from admin to myuser?
View 1 Replies View RelatedI'm having trouble with my very new computer (Lenovo Y480 with Windows 7 Home Premium 64 bit), which I've narrowed down to the following sequence:
1. I restored computer to original factory settings (to rule out possible causes)
2. I ran msconfig, and checked the boxes 'Safe Mode' and 'Networking.' I got the following error message:"System configuration cannot save the original boot configuration for later restoration. Boot changes will be reverted. The system cannot find the file specified"
3. The default boot option disappeared from the boot menu (Windows 7, default OS, current OS).
4. When I restarted my computer, it would not boot and gave me the error 0xc00034, stating that the file BootBCD was missing.
I did not do anything else with my computer after restoring the factory settings, and I did not connect to the internet. I originally encountered the problem when I wanted to try installing Windows updates in safe mode after some of the installations failed. I have replicated the error several times, including after successfully installing all Windows updates.
i got a toshiba satellite p775d and for some reason, the bios won't allow me to change any settings. it isn't asking for a password or anything like that, it just won't let me navigate to the appropriate parts of the bios gui in order to adjust the configuration. i tried flashing with the toshiba support utility, it won't permit it since the bios is the same version apparently. the bios manufacturer website utility won't permit a flash either, it only reprograms the blocks. do i have to take it into a professional?
View 4 Replies View Relatedwell now ive got this really weird problem that only seems to be affecting windows 7 on my computer...i duel boot between both xp and 7; 7 is what i use most of the time and only really keep xp as back up and the fact that im to lazy to move partitions and files around. but to the problem...when i start up windows 7 as its booting up as far as i can tell it just keeps sucking up my physical memory...once i do get into an account(administrator which has nothing on it) and open task manager(which takes a long time to start up log on and bring it up) i see that my physical memory usage just keeps going up and up untill it evetually uses to much and i cant use my mounse.....then itll keep going untill its completly locked up and i have to use the power button to shut it down...this has been going on for bout a week now...ive tried taken off all hardware(exept video card which is because i have no on board) and tried windows start up repair(which does nothing) and i cant use my disc right now because it wont let me boot into it(gives me i/o error i think my cd drive is dieing....only bout 6 years old now heh) this problem only happens with windows 7 on xp i have no problem i boot up and can leave it going.also sorry for any spelling mistakes but im tired right now and left my glasses in the other room.
View 2 Replies View RelatedI have a windows 7 x64. I separated 40 gb my disk and installed windows 2008 R2.But my boot info did not change. How can i add my new OS in my bcdedit? (I need exact commands)
View 2 Replies View RelatedIt was doing this once before, but this time there is no BSOD. My system is biostar TH55b hd mobo, Asus ATI 5450 HD Graphics, 4 gigs ram, and several hundred gigs oh hd space. The description of the issue is that my pc freezes daily without any specific messages. Wish I could give you a better desription. This is a fresh reinstall of the os. Also there isn't any bluescreen hence there's no dump file, atleast that I know of.
View 8 Replies View RelatedI am having issues creating a dual boot configuration for my Windows 7 and Windows Server 2008 R2 with GPT/EFI. Has anyone had success?
View 3 Replies View RelatedI want to deploy Windows 7 via GPO by computer configuration. I've looked at instructions from the net but none of them worked!
View 4 Replies View RelatedI recently added a hard drive to my computer (SSD), and installed Windows 7 x64 onto it. The result being a dual boot system, which by default boots to the SSD, and optionally (by Windows Boot Menu), can be booted to the original drive (standard mechanical drive).
Initial setup went fine, however I decided to customize the Windows Boot Menu, so that logical names could be associated with each operating system instance. To do this I used EasyBCD and I altered the names in the Windows Boot Menu from: Quote:
Windows 7
Windows 7
to... Quote:
Windows 7 - SSD
Windows 7 - Standard Drive
Shortly after the modification I noticed that I was no longer able to boot into the original OS. Instead I was being presented with a "Repair Windows" option. Figuring that my EasyBCD "tampering" may have had something to do with the issue I decided to change the names back to "Windows 7" in the Windows Boot Menu. However doing so had no positive impact on boot up of the original OS.
After booting again into the original OS I accepted the "Repair Windows" option, and then left the computer over night to do it's "thing". After completion of the "Repair" the situation has deteriorated -
* Windows doesn't load (the same as before)
* Windows doesn't present a "Repair Windows" option (it did before)
* The computer reboots a short period after the "Starting Windows" screen is presented
As a side note the drive is in good health, and all data on it can be read from within Windows 7 when I boot to the SSD OS.
I recently added a hard drive to my computer (SSD), and installed Windows 7 x64 onto it. The result being a dual boot system, which by default boots to the SSD, and optionally (by Windows Boot Menu), can be booted to the original drive (standard mechanical drive).
Initial setup went fine, however I decided to customize the Windows Boot Menu, so that logical names could be associated with each operating system instance. To do this I used EasyBCD and I altered the names in the Windows Boot Menu from: Quote: Windows 7 Windows 7 to... Quote: Windows 7 - SSD Windows 7 - Standard Drive Shortly after the modification I noticed that I was no longer able to boot into the original OS. Instead I was being presented with a "Repair Windows" option. Figuring that my EasyBCD "tampering" may have had something to do with the issue I decided to change the names back to "Windows 7" in the Windows Boot Menu. However doing so had no positive impact on boot up of the original OS.
After booting again into the original OS I accepted the "Repair Windows" option, and then left the computer over night to do it's "thing". After completion of the "Repair" the situation has deteriorated -
* Windows doesn't load (the same as before)
* Windows doesn't present a "Repair Windows" option (it did before)
* The computer reboots a short period after the "Starting Windows" screen is presented
As a side note the drive is in good health, and all data on it can be read from within Windows 7 when I boot to the SSD OS.
My win 7 machine boots perfectly with two SATA mirrored drives and a Promise Ultra 133 TX2 IDE controller card with no drives attached. But when I connect drives to either IDE1 or IDE2, the machine will not even get to win start up.
View 1 Replies View RelatedI was trying to get my laptop to boot into safe mode to get rid of a file. I went to msconfig and picked Safe Boot, after I restarted my laptop, I got the message:Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have the disc, contact your system administrator or computer manufacturer for assistance.File: BootBCD Status: 0xc0000034 Info: The Windows Boot Configuration Data file is missing required information.When I hit enter, it just restarts my laptop and brings me to the same screen. My laptop did not come with a installation disc.. The only thing I did was change a setting which I thought was going to boot me into safemode in msconfig.
I need to access Computer Configuration in order to navigate to User Rights. Does anyone know how to access Computer Configuration?
View 6 Replies View RelatedI am trying to fix my girlfriend's computer, which freezes on the windows log-on screen. (I am accessing these forums from my computer.)If I input her password in quickly, then it freezes with "Welcome" in the center of the screen and "Windows 7 Home Premium" at the bottom.If I am slow inputting her password, then it freezes before I get a chance to input the password.After a few minutes, the computer shuts down. When I boot it up, it says something about the computer overheating.I have tried a few things like system repair, etc, but not in any sort of rigorous way (and honestly, I don't remember which ones I have tried so I wouldn't mind starting from scratch, step-by-steph.
View 5 Replies View RelatedI tried to install new updates of Ableton live and the machine crashed badly... and since them it has really gone a bit wonky. When I press the on button to boot up the laptop I get the following message.The Windows Boot Configuration Data (BCD) Store file contains some invalid information.[CODE]I have a back up on another external drive ..... plus I have made a repair disk and so on when I first got the machine.
View 2 Replies View RelatedOne of my friends has a Windows 7 computer, but suddenly it could not start,I got an error like this
File: BootBCD
Status: 0xc0000098
Info: The Windows Boot Configuration Data file does not contain a valid OS entry
And I ran a Code: chkdsk c: /f /r followed by a Code: Bootrec /RebuildBcd , where it asked me, if I want to add the entry to the BCD store, and of course I answered yes Afterwards I rebooted the computer, but it came up with a blank screen. I then tried to restart the computer and it keeps coming up with a blank screen. I tried to repair using the Windows 7 - cd's repair, but with no succes. It found the Windows 7 Home Professionel, but when I tried to repair it, it says, that it could not find the OS (something like noOSInstalled). I then came into cmd again, and tried first with Code: BootRec , but it could not find the OS.Now I set it to run Code: chkdsk over the night, but what can I do, if I comes up with the blank screen again? Do I have to reinstall the computer, or are there other solutions?
CHKDSK found ad sectors in the following files Code: WindowsassemblyNATIVE~1.303PRESEN~1FFB7C7~1PRESEN~1.DLL
WindowsassemblyNATIVE~2.303SYSTEM~3.SER559EBA~1SYSTEM~1.DLL If this indicates something
Maybe I have to try with F8, when I restarts the computer for the first time after running the Code: BootRec .
windows boot configuration data file does not contain a valid OS entry (0xc0000098)Trying to fix my aunts laptop (Toshiba satellite/windows 7). Tried a recovery disc, which was painfully slow but no joy.
[code]....
I did the diskpart thing in command prompt:
vol 0= E dvd rom
vol 1= C 100mb partition (active)
vol 2= D 232gb partition
when i tried to install windows 7 ultimate 32 bit from dvd.i get this error windows could not update computers boot configuration.and setup closes.
View 9 Replies View RelatedBefore doing anything what i did was to write zeros on the HDD because i wanted to format completely the hard drive and get rid of any virus infecting the HDD.The problem is not on my DVD, i have used it in the past to fix/format many computers and also tried running the setup from another CD of windows 7 and also a Windows XP one but it freeze on the same point.It looks like this.So if it is not a DVD problem, what could cause it, how do i fix it.The Computer has no OS installed since i wrote zeros on the HDD (FULL DATA ERASE) When i try to do this clean install thing it just freezes on this point after loading the necessary setup files.I tried changing the BOOT SEQUENCE to 1-> CD, 2-> HDD, 3-> Other Removable Devices.I tried disabling the FLOPPY DISK from the Boot Sequence and CMOS (seen this in another thread).I tried other DVD's, not working,
View 2 Replies View RelatedI am working on Samsung notebook with Intel atom processor (without DVD Rom). I installed antivirus and later restarted the machine. After the restarting it tells me "windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation dics and restart your computer and other procedures
2. Chose your language settings and click nex
3. Click repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File : ootBCD
Status: 0xc0000098
The windows boot configuration data file does not contain a valid OS entry.
I'm trying to get a Toshiba satellite L300D to start Win-7. It gives an error message:
"An error occurred while attempting to read the boot configuration data"
Not really sure what that means, but my guess is thats a file that it isn't finding. My pic isn't very clear, the Status is 0xc000000f, again not sure what that means. This machine has been running and well behaved for a long time.
my laptop will not load up. I can get it to the screen where it says repair computer, safe mode and all that. (advance boot options) but anytime I click any off them it goes to a screen where it says I need to put in the windows installer disk. I do not have any disk but I downloaded the repair disc from my other laptop. I put the disk in the computer and restart it and it just goes back to same screen. It does not automatic rebot, or ask me to rebot from disk.
View 2 Replies View RelatedI was running Windows 7 on a Dell Vostro 3700 Laptop..After doing a spyware scan and finding and deleting all the entries I found, the next time I turned it on I get the error: oxc000000f "An error occured while attmepting to read the boot configuration data File: BootBCD"
I have looked online for solutions and tried using the Windows 7 disc (a copy) and also tried using 3 recovery disks, these all fail because it just stays completely black with a cursor (left for hours even) or I get a error message something around the lines of "insert correct boot media into the correct boot device" and I have no idea what this means. I cannot do a repair because I can only get the Windows disc to load if I remove the hard drive?? this is the only way I have got it past the green loading bar, so I am stuck and have no idea what to do..it only seems to respond to cds if the hard drive is removed?.. this all happened very suddenly and now I have a very expensive �800 paperweight
To add to this - I also tried the command prompt typing the bootrec.exe code that I found on the internet..selecting command prompt from the option when the Windows 7 disc was loaded, but basically it came up with an error of some sort and it had a drive letter of X:/ on the command prompt ?? ..Also to get to this the hard drive was removed because like I said I cannot get the discs working with it in.. I'm guessing this means the hard drive is screwed but there is clearly a problem with the boot sector and I have no idea on repairing it now.
Setup a test PC at work the other for Windows 7 32 Bit and Windows 7 64 Bit (dual boot). Set the dual boot up with EasyBCD. It was working fine until about 20 minutes ago.
I have tried the automatic startup repair but it does not fix the problem. I have also gone through Bootsect.exe and Bootrec.exe commands and they have succesfully written new MBR's and Bootsectors yet the PC still restarts. I have had to /force the previous commands to run.
I have also tried Chkdsk /r but for some reason it just runs through very quickly and finds no errors.
Any ideas as the PC's also have the virtual XP setup.
Those two IE8 patches from Windows Update seemed to really kill my system. I don't even use IE. I installed the patch, restarted, and my computer would not boot. Random services / processes would crash followed by WerFault crashing... I went into safe mode and system a system restore, and I thought all was good. But now, I have to continually choose to use last known good configuration from the boot options to get into windows. If I don't, it'll proceed to crash. Is there any way to make windows use the LKGC as my current config??
View 5 Replies View RelatedI recently got my computer running again after the motherboard had been friend, obviously replacing the old one for new working one of a different model same manufacturer. I have tried starting with a fresh install, but consistently running into errors. Some of which include "Windows could not retrieve information about the disks on this computer." "Boot Configuration is corrupt 0x460" And screen randomly freezing and pixel breaking.
View 9 Replies View Related