Windows 7 DUAL Boot Configuration?
Oct 6, 2011I have a windows 7 x64. I separated 40 gb my disk and installed windows 2008 R2.But my boot info did not change. How can i add my new OS in my bcdedit? (I need exact commands)
View 2 Replies
ADVERTISEMENT
Creating A Dual Boot Configuration For Windows 7
Oct 28, 2011I am having issues creating a dual boot configuration for my Windows 7 and Windows Server 2008 R2 with GPT/EFI. Has anyone had success?
View 3 Replies View RelatedWant To Delete An OS From A Dual Boot Configuration ?
Sep 26, 2009I originally stated out with XP Pro and then installed Win 7 in a separate partition with dual booting. Now I want to get rid of the XP OS and recover the partition the XP OS is in for other uses.
Running bcdedit shows the the Win 7 as drive C and XP as drive D. The master boot record, I am guessing, in is drive D.
So how do I get the master boot record into the Win 7 partition so I can delete the partition containing the XP OS?
Can't Boot Into Original OS After Dual Boot Configuration
Feb 23, 2012I recently added a hard drive to my computer (SSD), and installed Windows 7 x64 onto it. The result being a dual boot system, which by default boots to the SSD, and optionally (by Windows Boot Menu), can be booted to the original drive (standard mechanical drive).
Initial setup went fine, however I decided to customize the Windows Boot Menu, so that logical names could be associated with each operating system instance. To do this I used EasyBCD and I altered the names in the Windows Boot Menu from: Quote:
Windows 7
Windows 7
to... Quote:
Windows 7 - SSD
Windows 7 - Standard Drive
Shortly after the modification I noticed that I was no longer able to boot into the original OS. Instead I was being presented with a "Repair Windows" option. Figuring that my EasyBCD "tampering" may have had something to do with the issue I decided to change the names back to "Windows 7" in the Windows Boot Menu. However doing so had no positive impact on boot up of the original OS.
After booting again into the original OS I accepted the "Repair Windows" option, and then left the computer over night to do it's "thing". After completion of the "Repair" the situation has deteriorated -
* Windows doesn't load (the same as before)
* Windows doesn't present a "Repair Windows" option (it did before)
* The computer reboots a short period after the "Starting Windows" screen is presented
As a side note the drive is in good health, and all data on it can be read from within Windows 7 when I boot to the SSD OS.
Can't Boot Into Original OS After Dual Boot Configuration
Feb 23, 2012I recently added a hard drive to my computer (SSD), and installed Windows 7 x64 onto it. The result being a dual boot system, which by default boots to the SSD, and optionally (by Windows Boot Menu), can be booted to the original drive (standard mechanical drive).
Initial setup went fine, however I decided to customize the Windows Boot Menu, so that logical names could be associated with each operating system instance. To do this I used EasyBCD and I altered the names in the Windows Boot Menu from: Quote: Windows 7 Windows 7 to... Quote: Windows 7 - SSD Windows 7 - Standard Drive Shortly after the modification I noticed that I was no longer able to boot into the original OS. Instead I was being presented with a "Repair Windows" option. Figuring that my EasyBCD "tampering" may have had something to do with the issue I decided to change the names back to "Windows 7" in the Windows Boot Menu. However doing so had no positive impact on boot up of the original OS.
After booting again into the original OS I accepted the "Repair Windows" option, and then left the computer over night to do it's "thing". After completion of the "Repair" the situation has deteriorated -
* Windows doesn't load (the same as before)
* Windows doesn't present a "Repair Windows" option (it did before)
* The computer reboots a short period after the "Starting Windows" screen is presented
As a side note the drive is in good health, and all data on it can be read from within Windows 7 when I boot to the SSD OS.
Maintain Dual Monitor Configuration When Mass-upgrading To Windows 7 From XP?
Jul 19, 2012it's possible to maintain a dual monitor, extended desktop configuration when moving a relatively large network from XP Professional to 7 Enterprise. As it stands now, after the Win 7 image finishes installing the secondary monitor does not automatically attach leaving the user to have to do so when they log on for the first time. We have seen cases where the second monitor does attach, but the primary monitor has switched.how to set the secondary monitor to attach at first logon essentially maintaining the former XP extended desktop configuration?
View 3 Replies View Related"System Configuration Cannot Save The Original Boot Configuration For Later Restoration"
Nov 15, 2012I'm having trouble with my very new computer (Lenovo Y480 with Windows 7 Home Premium 64 bit), which I've narrowed down to the following sequence:
1. I restored computer to original factory settings (to rule out possible causes)
2. I ran msconfig, and checked the boxes 'Safe Mode' and 'Networking.' I got the following error message:"System configuration cannot save the original boot configuration for later restoration. Boot changes will be reverted. The system cannot find the file specified"
3. The default boot option disappeared from the boot menu (Windows 7, default OS, current OS).
4. When I restarted my computer, it would not boot and gave me the error 0xc00034, stating that the file BootBCD was missing.
I did not do anything else with my computer after restoring the factory settings, and I did not connect to the internet. I originally encountered the problem when I wanted to try installing Windows updates in safe mode after some of the installations failed. I have replicated the error several times, including after successfully installing all Windows updates.
Configuration On Dual Displays
Jun 14, 2012I might not be asking this the right way, but let me try to elaborate.I have a W7 64 bit PC with an ATI Radeon HD 5570 video card. I have my monitor connected and I have a flatscreen TV that is connected to the video card through an HDMI cable.When I want to watch content through my PC on my flatscreen I have to go into Control Panel/Display and manually change the setting to dual display. Is there not a way to automatically send the signal without having to get into the Control Panel?
View 2 Replies View RelatedOdd Configuration: Setting Up Dual Monitors
Nov 1, 2009Ok, so I just added Windows 7 to my lineup. After an epic battle with permission problems between XP and 7, I finally managed to fix it and have moved on to a slightly more odd yet annoying problem- my dual monitors.
The way I used to have my monitors set up was my monitor on the right had my task bar and icons... but the monitor on my left was the main monitor. That way when a program opened it would open on my left monitor (which is right in front of me) while still allowing me complete access to everything under my taskbar and all my icons to my right.
Is there any way to do that in Windows 7? When I select "Make this my main display" it moves the task bar over to that monitor, which is annoying. Any suggestions?
Note: for those of you curious on how to do this in XP or Vista- pick the monitor you want to be your main monitor (the one programs open on) and pick the one you want to have your taskbar. Let's use my setup- main monitor on the left/Task bar and stuffs on the right).
- Go to display, right click on the right monitor and uncheck "attached". This will turn it off. Now all you have is the left monitor with taskbar and stuff all over it.
- Right click the right monitor again. Check "attached" AND "Primary". Click apply. Right monitor turns back on. Everything refreshes and task bar is on the right monitor.
- Right click left monitor and click "Primary". Task bar + icons are still on the right monitor, but now all programs open on the left one.
Dual Boot Windows 7 64 And Xp 32 Dual Boot Same Drive?
Sep 12, 2011i have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies View RelatedWindows 7 And Linux Fedora Dual Boot With Dual Drives?
Feb 4, 2011dual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies View RelatedInteral Network Security With Dual Router Configuration?
Jun 4, 2012I was a bit of a loss and maybe it's because I have been out of the game for a long time but I came across a disturbing development. I call century link because my router was not connecting at the proper speed of 7 mbps. That problem was easily remedied over the phone but the lady said she could see several devices connected. This lost me a bit because I have a double router configuration. The Actiontech PK5000 i turned into nothing more that an internet modem. I disabled the DHCP and configured my Linksys E1200 for all the internal DHCP so there is only one cable going to the PK5000. I should technically speaking look like one user on there network with natural protection from the second router. I may be kidding myself or man I'm getting old but if someone can tell me how that works it would be fun to know and what would even be funner to know is how to stop it
View 1 Replies View RelatedWindows 7 Boot Configuration Is Corrupt?
Aug 21, 2011well now ive got this really weird problem that only seems to be affecting windows 7 on my computer...i duel boot between both xp and 7; 7 is what i use most of the time and only really keep xp as back up and the fact that im to lazy to move partitions and files around. but to the problem...when i start up windows 7 as its booting up as far as i can tell it just keeps sucking up my physical memory...once i do get into an account(administrator which has nothing on it) and open task manager(which takes a long time to start up log on and bring it up) i see that my physical memory usage just keeps going up and up untill it evetually uses to much and i cant use my mounse.....then itll keep going untill its completly locked up and i have to use the power button to shut it down...this has been going on for bout a week now...ive tried taken off all hardware(exept video card which is because i have no on board) and tried windows start up repair(which does nothing) and i cant use my disc right now because it wont let me boot into it(gives me i/o error i think my cd drive is dieing....only bout 6 years old now heh) this problem only happens with windows 7 on xp i have no problem i boot up and can leave it going.also sorry for any spelling mistakes but im tired right now and left my glasses in the other room.
View 2 Replies View RelatedWindows 7 64-bit Boot Configuration Is Corrupt?
Mar 21, 2011It was doing this once before, but this time there is no BSOD. My system is biostar TH55b hd mobo, Asus ATI 5450 HD Graphics, 4 gigs ram, and several hundred gigs oh hd space. The description of the issue is that my pc freezes daily without any specific messages. Wish I could give you a better desription. This is a fresh reinstall of the os. Also there isn't any bluescreen hence there's no dump file, atleast that I know of.
View 8 Replies View RelatedWindows Could Not Change Computer's Boot Configuration
Jan 29, 2012I just built a new PC and currently trying to install windows 7 64 bit Home ed for the first time. It gets pretty far into the install but errors out stating that "Windows could not change the computer's boot configuration." My BIOS has the latest version (Asus P8Z68/PRO/Gen3). I don't have any RAID set up, just a simple 64 GB SSD.
View 3 Replies View RelatedWindows 7 Won't Boot With RAID Configuration And IDE Controller Card
Jun 4, 2012My win 7 machine boots perfectly with two SATA mirrored drives and a Promise Ultra 133 TX2 IDE controller card with no drives attached. But when I connect drives to either IDE1 or IDE2, the machine will not even get to win start up.
View 1 Replies View RelatedWindows 7 Boot Configuration Data File Is Missing?
Oct 25, 2012I was trying to get my laptop to boot into safe mode to get rid of a file. I went to msconfig and picked Safe Boot, after I restarted my laptop, I got the message:Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have the disc, contact your system administrator or computer manufacturer for assistance.File: BootBCD Status: 0xc0000034 Info: The Windows Boot Configuration Data file is missing required information.When I hit enter, it just restarts my laptop and brings me to the same screen. My laptop did not come with a installation disc.. The only thing I did was change a setting which I thought was going to boot me into safemode in msconfig.
Windows 7 Boot Configuration Is Corrupt 0x460 On Logon Screen?
Sep 3, 2012I am trying to fix my girlfriend's computer, which freezes on the windows log-on screen. (I am accessing these forums from my computer.)If I input her password in quickly, then it freezes with "Welcome" in the center of the screen and "Windows 7 Home Premium" at the bottom.If I am slow inputting her password, then it freezes before I get a chance to input the password.After a few minutes, the computer shuts down. When I boot it up, it says something about the computer overheating.I have tried a few things like system repair, etc, but not in any sort of rigorous way (and honestly, I don't remember which ones I have tried so I wouldn't mind starting from scratch, step-by-steph.
View 5 Replies View RelatedWindows 7 Boot Configuration Data (BCD) Store File Error?
Feb 17, 2012I tried to install new updates of Ableton live and the machine crashed badly... and since them it has really gone a bit wonky. When I press the on button to boot up the laptop I get the following message.The Windows Boot Configuration Data (BCD) Store file contains some invalid information.[CODE]I have a back up on another external drive ..... plus I have made a repair disk and so on when I first got the machine.
View 2 Replies View RelatedThe Windows Boot Configuration Data File Does Not Contain A Valid OS Entry
Mar 2, 2012One of my friends has a Windows 7 computer, but suddenly it could not start,I got an error like this
File: BootBCD
Status: 0xc0000098
Info: The Windows Boot Configuration Data file does not contain a valid OS entry
And I ran a Code: chkdsk c: /f /r followed by a Code: Bootrec /RebuildBcd , where it asked me, if I want to add the entry to the BCD store, and of course I answered yes Afterwards I rebooted the computer, but it came up with a blank screen. I then tried to restart the computer and it keeps coming up with a blank screen. I tried to repair using the Windows 7 - cd's repair, but with no succes. It found the Windows 7 Home Professionel, but when I tried to repair it, it says, that it could not find the OS (something like noOSInstalled). I then came into cmd again, and tried first with Code: BootRec , but it could not find the OS.Now I set it to run Code: chkdsk over the night, but what can I do, if I comes up with the blank screen again? Do I have to reinstall the computer, or are there other solutions?
CHKDSK found ad sectors in the following files Code: WindowsassemblyNATIVE~1.303PRESEN~1FFB7C7~1PRESEN~1.DLL
WindowsassemblyNATIVE~2.303SYSTEM~3.SER559EBA~1SYSTEM~1.DLL If this indicates something
Maybe I have to try with F8, when I restarts the computer for the first time after running the Code: BootRec .
Windows Boot Configuration Data File Does Not Contain A Valid OS Entry
Aug 31, 2012windows boot configuration data file does not contain a valid OS entry (0xc0000098)Trying to fix my aunts laptop (Toshiba satellite/windows 7). Tried a recovery disc, which was painfully slow but no joy.
[code]....
I did the diskpart thing in command prompt:
vol 0= E dvd rom
vol 1= C 100mb partition (active)
vol 2= D 232gb partition
Windows Could Not Update Computers Boot Configuration.and Setup Closes
Nov 17, 2010when i tried to install windows 7 ultimate 32 bit from dvd.i get this error windows could not update computers boot configuration.and setup closes.
View 9 Replies View RelatedBoot Configuration Is Corrupt 0x460 At Starting Windows 7 Screen?
Oct 12, 2012Before doing anything what i did was to write zeros on the HDD because i wanted to format completely the hard drive and get rid of any virus infecting the HDD.The problem is not on my DVD, i have used it in the past to fix/format many computers and also tried running the setup from another CD of windows 7 and also a Windows XP one but it freeze on the same point.It looks like this.So if it is not a DVD problem, what could cause it, how do i fix it.The Computer has no OS installed since i wrote zeros on the HDD (FULL DATA ERASE) When i try to do this clean install thing it just freezes on this point after loading the necessary setup files.I tried changing the BOOT SEQUENCE to 1-> CD, 2-> HDD, 3-> Other Removable Devices.I tried disabling the FLOPPY DISK from the Boot Sequence and CMOS (seen this in another thread).I tried other DVD's, not working,
View 2 Replies View RelatedHow Do I Keep Win7, Dump XP From Dual Drive, Dual Boot ?
Nov 12, 2009As currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
Dual Boot Windows 7 And Vista Boot Error Winload.exe
Oct 14, 2009I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies View RelatedRestore Points Missing From Windows 7 After Boot In Xp (dual Boot)
Aug 8, 2012I have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies View RelatedInstalled AntiVirus - Windows 7 Boot Configuration Data File Does Not Contain Valid OS Entry
Jan 21, 2012I am working on Samsung notebook with Intel atom processor (without DVD Rom). I installed antivirus and later restarted the machine. After the restarting it tells me "windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation dics and restart your computer and other procedures
2. Chose your language settings and click nex
3. Click repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File : ootBCD
Status: 0xc0000098
The windows boot configuration data file does not contain a valid OS entry.
Windows 7 Won't Load - Error Occurred While Attempting To Read Boot Configuration Data
Feb 11, 2011I'm trying to get a Toshiba satellite L300D to start Win-7. It gives an error message:
"An error occurred while attempting to read the boot configuration data"
Not really sure what that means, but my guess is thats a file that it isn't finding. My pic isn't very clear, the Status is 0xc000000f, again not sure what that means. This machine has been running and well behaved for a long time.
Cannot Boot Windows 7 After Installing Opensuse 12.1 On Dual Boot
Apr 6, 2012I installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies View RelatedWindows 7 Won't Boot After Installing Ubuntu Dual Boot?
Dec 3, 2010I can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies View RelatedDual Boot - Change OS Name In Windows Boot Manager
Mar 11, 2009How to Change the OS Name in Windows Boot Manager ?
View 0 Replies View Related