windows boot configuration data file does not contain a valid OS entry (0xc0000098)Trying to fix my aunts laptop (Toshiba satellite/windows 7). Tried a recovery disc, which was painfully slow but no joy.
[code]....
I did the diskpart thing in command prompt:
vol 0= E dvd rom
vol 1= C 100mb partition (active)
vol 2= D 232gb partition
One of my friends has a Windows 7 computer, but suddenly it could not start,I got an error like this
File: BootBCD
Status: 0xc0000098
Info: The Windows Boot Configuration Data file does not contain a valid OS entry
And I ran a Code: chkdsk c: /f /r followed by a Code: Bootrec /RebuildBcd , where it asked me, if I want to add the entry to the BCD store, and of course I answered yes Afterwards I rebooted the computer, but it came up with a blank screen. I then tried to restart the computer and it keeps coming up with a blank screen. I tried to repair using the Windows 7 - cd's repair, but with no succes. It found the Windows 7 Home Professionel, but when I tried to repair it, it says, that it could not find the OS (something like noOSInstalled). I then came into cmd again, and tried first with Code: BootRec , but it could not find the OS.Now I set it to run Code: chkdsk over the night, but what can I do, if I comes up with the blank screen again? Do I have to reinstall the computer, or are there other solutions?
CHKDSK found ad sectors in the following files Code: WindowsassemblyNATIVE~1.303PRESEN~1FFB7C7~1PRESEN~1.DLL
WindowsassemblyNATIVE~2.303SYSTEM~3.SER559EBA~1SYSTEM~1.DLL If this indicates something
Maybe I have to try with F8, when I restarts the computer for the first time after running the Code: BootRec .
I am working on Samsung notebook with Intel atom processor (without DVD Rom). I installed antivirus and later restarted the machine. After the restarting it tells me "windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation dics and restart your computer and other procedures
2. Chose your language settings and click nex
3. Click repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File : ootBCD
Status: 0xc0000098
The windows boot configuration data file does not contain a valid OS entry.
had a few problems dual booting and managed to get every thing fine. Installed easyBCD and clicked install to the wrong partitionNow when i boot after the bios it appears "windows failed to start, a recent hardware change might be the problem." Offers solutions to boot from CD which i have but wont boot. Will just appear the same screen.file:\boot\bcdinfo the windows boot configuration data file does not contain a valid OSDell inspiron 1720
View 1 Replies View RelatedI was trying to get my laptop to boot into safe mode to get rid of a file. I went to msconfig and picked Safe Boot, after I restarted my laptop, I got the message:Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have the disc, contact your system administrator or computer manufacturer for assistance.File: BootBCD Status: 0xc0000034 Info: The Windows Boot Configuration Data file is missing required information.When I hit enter, it just restarts my laptop and brings me to the same screen. My laptop did not come with a installation disc.. The only thing I did was change a setting which I thought was going to boot me into safemode in msconfig.
I tried to install new updates of Ableton live and the machine crashed badly... and since them it has really gone a bit wonky. When I press the on button to boot up the laptop I get the following message.The Windows Boot Configuration Data (BCD) Store file contains some invalid information.[CODE]I have a back up on another external drive ..... plus I have made a repair disk and so on when I first got the machine.
View 2 Replies View RelatedI was messing around with the partition editor in Fedora 14 and accidentally changed the file type on the boot partition. When I go through the startup repair and do the command prompt method, when I enter bcdedit I get the message "The boot configuration data store could not be opened. The system cannot find the file specified"When I do bootrec.exe /fixboot it give me this. "The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded an that the volume is not corrupted" /fixmbr says that it completes successfully btw.
View 2 Replies View RelatedI'm trying to get a Toshiba satellite L300D to start Win-7. It gives an error message:
"An error occurred while attempting to read the boot configuration data"
Not really sure what that means, but my guess is thats a file that it isn't finding. My pic isn't very clear, the Status is 0xc000000f, again not sure what that means. This machine has been running and well behaved for a long time.
I am running Windows 7 64 bit Ultimate on two PCs on my home network. I went to use one yesterday and was presented with a black screen. I rebooted the PC hoping that would solve my issue and was presented with the following error message while trying to reboot:
Windows failed to start. A recent hardware or software change might be the cause.
File: BOOTBCD
Status: 0xc000000d
Info: An error occurred while attempting to read the boot configuration data
I checked my other PC and saw that it had been updated with several Windows patches yesterday. I'm guessing that the broken PC had an issue installing or rebooting from one of the patches. I ran the repair utility on the windows 7 dvd as instructed by the error message. It was unable to find a previous installation of windows with an error box saying: The file or directory C:BootBCD is corrupt and unreadable please run Chkdsk utility.
I tried the auto repair anyway, which appears to be working until the end when it gives me the "The file or directory C:BootBCD is corrupt and unreadable please run Chkdsk utility" error again. Then it says it can't save the fixes and says it can't be repaired. When I check the details it says I need to "repair offline" and that it cannot find an OS installed.
In my searches for an answer, I read about rebuilding the BCD through the command prompt. I ran the following commands:
BOOTREC /FIXMBR - said it was successful
BOOTREC /FIXBOOT - said it was successful
BOOTREC /REBUILDBCD - failed saying The file or directory C:BootBCD is corrupt and unreadable please run Chkdsk utility
I ran chkdsk and got no errors. I only have one hard drive, but when I go to a command prompt (from the repair section on the Windows 7 Install disk) it defaults to D:. I checked C: and it appears to be making the reserved system space drive C:, which would explain why I can't find a windows install on it. Worst case, If I just go down the path of re-installing windows without formatting the drive, will it pickup my old settings?
Here is what system info I could get (from the BIOS startup diagnostics):
Main Processor: AMD Athalon 64x2 Dual Core Processor 3800+
Memory Testing: 2030592K +64M shared memory
Memory Information: DDR2 533 Dual Channel, 128 bit
CPU L2 cache size: 512K x 2
I'm getting this every time I boot up my computer. It happened after I had my computer on "sleep". When I woke up and tried to open my laptop, it shut off and showed me this:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc an restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: BootBCD
Status: 0xc0000001
Info: An error occurred while attempting to read the boot configuration data.
It simply takes me to the same screen when I hold "F8". So I cannot get the "Repair your computer." Option. I do not have the windows installation disc. Also, all I can do is basically start up my computer and it takes me to that screen every time.
im getting that message upon startup. Im running windows 7.It requests for the windows recovery CD to be inserted, so when I put the CD in to boot I get a "windows is loading files" then a starting windows with the windows logo then just a black screen with a cursor, I left it like this several times for at least an hour an nothing happened.I can't press F8 to access safe mode etc, nothing will happen.Pressing F12 to boot from CD just does the same thing as putting the CD in normally.
View 1 Replies View RelatedI'm getting this every time I boot up my computer.It happened after I had my computer on "sleep". When I woke up and tried to open my laptop, it shut off and showed me this:Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc an restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
File: BootBCD
Status: 0xc000000
1Info: An error occurred while attempting to read the boot configuration data.
[code]....
I have built my own computer and I have a ASUS P9X79 Pro motherboard, an Asus GT440 graphics card and a Corsair 120gb SSD. I'm trying to get win 7 to install on this brand new SSD. No other drives connected. The BIOS which has been flashed and is up to date finds both the DVD drive and the SSD. I've set boot priority to the DVD drive and I keep getting this MSG below. My SSD is brand new and this would be new install........ Windows failed to start. A recent hardware or software change might be the cause. o
File:EFIMicrosoftBootBCD
STATUS: 0xc0000178
Info: An error occurred while attempting to read the boot configuration data.
ok i had some recent windows updates succesfuly and rebooted, since that at start up im getting "Error msg : Boot configuration data editor has stopped working"any way to sort this ? what cause it ?Have tryed system restore several diffirent restore dates but still the same.
View 4 Replies View RelatedI'm getting this error after a forced shut down. I'm told to insert installation disk and repair but I don't get this option, I'm just returned to the same error message. I have tried restarting and loading windows from the installation disc. I'm told that windows is loading and the windows logo appears but after a while it goes to a black screen with only the mouse cursor showing.
File: ootBCD
Status: 0xc0000001
Info: an errr occurred while attempting to read the boot configuration data
My computer crashed and i have no internet for one of my three computers it says Wireless Network Connection doesn't have Valid IP Configuration?
View 1 Replies View RelatedMy landlord recently updated his apple router and i am now unable to connect to the internet. The flow of internets is from the ATT high speed connection that goes from the modem, then to an apple router, and then plugs into his ethernet port which sends it to the ethernet port at my apartment.When I use the windows 7 networking utility it tells me that <device name> does not have a valid ip configuration.[CODE]
View 2 Replies View RelatedI can't get wireless for some reason and get the msg: "Wireless doesn't have a valid IP configuration", with "unidentified network, no network access". In the past, I could just plug in to the wired connection and theIn suddenly, it would recognize the wireless. I can't seem to get it to work after reboot, turning off the router, etc. I've looked through other posts and tried various things and I don't have bonjour anywhere either that i can tell. [code]
View 5 Replies View RelatedHowever, recently my dad needed to reboot our modem several times because he was encountering problems with his laptop. This got the wireless working for a little while, but the need came to restart the modem again, so he did. Unfortunately, this put the wireless on the modem out of action. Originally, my laptop wouldn't even recognize the network's existence, but after a 3-hour-long tech support call to AT&T, our internet service provider, I finally got my laptop to recognize the network. Although the tech support lady through doing numerous things to both the laptop and modem, my laptop still will not connect fully to the network. By "will not connect fully" I mean that it gives me an error message, saying "connection unsuccessful", and on the list of networks, listed next to my network it says "Limited Access".
I've attempted to troubleshoot the problem multiple times, and so far the only thing that comes up is the message "Windows cannot connect to [name of my network]", and something saying I don't have a valid IP configuration. I have full access to the modem's configuration as well, and I've checked the firmware and other things to see if there is a problem with the modem. After numerous tests and diagnostics, nothing seems to come up that says there is anything wrong with the modem, but the limited access problem still occurs for my Dad's, my Sister's, and my laptop
I've had this problem since I bought a new desktop PC with windows 7 installed. Every once in a while my internet stops working (router+modem) and a yellow exclamation mark appears. When I use the windows solution utility I get two different messages:
a)either my wireless network connection does not have a valid IP
b) the default gateway is not available
I am using d-link dwa-127 wireless adapter since my computer does not have an integrated wifi card, and I have already removed norton, which could possibly be blocking my conncection. I have tried setting my IP manually, but it does not work.
At the beginning it all functioned normally, and even now it works, but it did not before. I also noticed that when it does not work it says 'Unidentified network', and when it does it says 'Smuc' (the ssid of our network). The internet as such is working this whole time, I always check it on my laptop with windows XP and an integrated WiFi card.
I have been using Windows 7 beta (386) with no problems up until a few days ago.I've run into the The Network Adaptor "Local Area Connection" does not have a valid IP Configuration message. When I go to Network Sharing I see that I am connected to an Unidentified Network but unable to connect to the internet. This has happened all of a sudden.
View 9 Replies View Relatederror I have read all the different guides on how to solve this problem and have yet to find a way to solve it it also doesn't
View 6 Replies View RelatedWe are setting up in a new office building that has a network. All of our phones are on VOIP. We have Windows 7 machines and a few macs.
When we connect to the network (either directly, or through a router or switch) only the phones will connect and work.
When we try to connect our machines we get the error "local are connection doesn't have a valid ip configuration"
I have wired internet broadband connection .After rebooting the computer,i can not not connect to the internet .while trouble shooting the networker adapter in device manager,i got message that local area connection does not have a valid ip configuration The detailed ipconfig are given below
Windows IP Configuration
Host Name . . . . . . . . . . . . : RAM-PC
Primary Dns Suffix . . . . . . . :
[Code].....
The computer which has the problem is an Acer Aspire X3400, 64-bit operating system. I get the unidentified network no internet access thing come up when i click on the little symbol at the bottom which has the yellow warning triangle infront of it. I have tried disabling the connection and restoring it. Releasing the ip and renewing it. I have tried to update the driver (ethernet cable) but it says it is up to date. In the driver management there is a yellow triangle next to the USB network interface.
View 1 Replies View RelatedOne of my computers is getting the "local area connection doesn't have a valid ip configuration" error from troubleshooting my network. My network is an "Unidentified Network" with NO NETWORK or INTERNET ACCESS. This happened ever since I installed a new modem. The modem is WORKING with all other computers. My NIC card for the computer that is not connecting, is also working since I tested it on another modem. I had to call the ISP to activate the new modem. I spoke with them and they said nothing is blocked on their end.So I've narrowed it down to my computer since there is no hardware issue. I connect by LAN, FYI. I've tried new cables, etc. My computer has no "BONJOUR" in it nor does it have any firewalls set up, just Windows Security Essentials.I noticed in my IPCONFIG /ALL that no IP shows up for my default gateway (should be 192.168.0.1). DHCP is enabled. I tried static IP as well to no avail.
View 11 Replies View Relatedwhen i start pc i see( Local area connection doesn t have a valid IP configuration) no connection ?
View 2 Replies View RelatedHaving a problem connecting to the internet with a Ethernet connected desktop. I am getting the following error '"Local Area Connection" doesn't have a valid IP configuration'. I have tried everything I have found on internet using my laptop with no success. This is in an apartment building so no access to the router.
What I've tried:
- Laptop works when connected to the same ethernet jack
- Desktop does not work when connected to another ethernet jack
- Reset winstock and ip/tcp stack cmd "netsh winsock reset catalog" and netsh int ip reset reset.log"
- Reinstalling drivers
- Do not have bonjour dns services
- Reinstalled windows 7 not formatting
i have an HP touchsmart computer running windows 7 home premium 64bit and im in the army living in the barracks so my only internet source is a hotspot that they have set up for us in the barracks my problem is that when i try to connect to it it says "Wireless Network Connection dosnt have a valid ip configuration".i have went through the cmd and did the ipconfig/all, ipconfig/release, ipconfig/renew with no luck iv reinstalled my drivers for my wireless card this is what i got with my ipconfig/all. [code]
View 5 Replies View RelatedIs what i get when i run the internet trouble shooter. I try to find a wireless network on my laptop and i connect to one but it sometimes it says (when i go to network sharing place) that it is an unidentified network. i try connecting to others but i don't know the security key.
View 4 Replies View RelatedI've been at this all day its a brand new computer(that might be the problem right there but i doubt it) I tried renew and release method and have unidentified network Public network as well even though i do not have wireless on the comp. The local area connection says no network access as well. Every other computer currently works wired or wireless so i know the ethernet isn't the problem either.
ipconfig /all Ipconfig001.jpg picture by frostbanana - Photobucket