Windows 7 Will Not Boot, Computer Did Not Come With A Install Disk?

Mar 26, 2011

My mom's computer started having issues booting a day ago, it seemed like something was draining all of her cpu's power. I verified that was not the case, and ran the computer in safe-mode. I downloaded Ccleaner and cleaned her registry with it (Yes, I verified that the registry values it removed/modified were safe, most of the having to do with programs I know were removed from the computer.) After a re-booting it appears the BCD has gone corruptit would be an easy fix, but her computer, (Bought at the store in a IVY Tech college.) did not come with a windows install disk, so repairing the BCD has proven difficult. Is there any other way I can do it? (I did ensure she made some recovery disk's when she bought it, but as far as I call tell, all they can do is fully restore windows.)

View 2 Replies


ADVERTISEMENT

Install Windows 7 On An ISO Disk Via Disk Boot?

Dec 28, 2011

So, I need to know if I can install windows 7 x64 via direct boot when I start up my computer it is in ISO format. So like my default boot will be my DVD drive to install it. can I do that with it being ISO format?

View 12 Replies View Related

DVD Will Not Boot Windows 7 Pro Install Disk?

Jul 1, 2011

Gateway GT5636E w/Windows Vista Home Premium 32. Trying to install Microsoft Windows 7 Pro 64. The system is 64 bit compatible and I do have the BIOS set to start DVD optical Drive first and I know I need to do a clean install. Don't go there please.I am using an offical Microsoft install DVD. I place the 64 bit DVD in while Vista is running and shut down as instructions indicate. Upon reboot the system seems to ignore the DVD and reboots to Vista. Also, the 64 bit install disk will not even read in Vista. The 32 bit install disk will read in Vista.

View 22 Replies View Related

Cannot Boot Hard Disk With Windows 7 In A Different Computer?

Nov 21, 2012

My computer had a problem with the Board so I am trying to boot the hard disk (the O.S is Windows 7) in a diferent computer but when it Shows the Welcolme Screen I always get blue screen. The other computer is a diferent model but I had done this before With Windows XP and it Worked with some drivers problems but It worked.

View 5 Replies View Related

Disk Error When Trying To Install Windows 7 Pro As Dual Boot

Jun 11, 2011

I've been trying to install Windows 7 Pro upgrade as dual boot with XP Home, and keep getting the message (something like) "Disk read error - press ctr-alt-del to restart" at the first boot during the installation processHave checked the hard drive for errors, and there are none. Have replaced the hard drive with a brand new one, and get the same result.[I also tried installing Windows 7 Home Premium upgrade, and get the same result.] [code]

View 4 Replies View Related

F4400 Series Disk Cannot Install In Computer Which Is Windows 7

Oct 29, 2011

why my HP Deskjet F4400 series disk cannot install in my computer which is window 7

View 1 Replies View Related

Install Windows 7 On Intel Computer With Hp Os Recovery Disk?

Nov 29, 2011

I have two computers. One is a HP P6820 and came with Windows 7 Operating System Recovery Disks. The other is an Intel DG35EC and has Windows XP Home Edition. How can I use The HP Recovery disks to install Windows 7 unto the Intel computer replacing Windows XP? I tried using the HP OSR disks on the Intel computer to instal Windows 7 but it didn't

View 1 Replies View Related

Unable To Install Windows 7 - Computer Sees The Disk As Being Blank

Oct 23, 2011

I have an odd problem with my Windows 7 installation. The computer I'm trying to install it on is running Windows XP, and any time I try to boot from the disk (I have it set to be first in the boot sequence), it seems to just skip over the disk altogether and run boot from the hard drive (into Windows XP). I looked into this further, and it turns out that the computer sees the disk as being blank (0 bytes out of 0 total bytes).

When I put it into other computers, it is read fine, and I have even used this disk to install multiple copies of Windows 7 on other computers. The computer that isn't working can read any other disk fine, and has never had DVD-drive related problems. I've even tried copying the files from the Windows 7 disk onto another DVD, as well as a portable USB drive, but those didn't seem to work either (it gave me some error about the disk not being bootable).

View 3 Replies View Related

Win 7 Disk Won't Boot Computer

Oct 9, 2009

I have my serial number that I got from Microsoft a while back and I burned the iso to a bootable dvd however when I try to boot with the burned disk, all that happens is I get a black screen with a flashing cursor at the top of the screen. I left the computer like this for aproximately 2 hours tonight and it never ended up booting up.

I've tried using imgburn as well as magiciso to burn the image to the disk and both of them have made coasters of several dvd disks now.

From what I remember when I first installed Win 7, I was atleast able to double click on the setup.exe program and it would bring up a windows 7 window in vista that was like an installer. However when I try that now, I just get a message telling me that autorun.dll is either not made for this version of windows or it is corrupt. I can't imagine the iso file becoming corrupt from simply sitting on a drive that I rarely use between the last time that I burned the iso image to a dvd and installed Win 7 and now.

Perhaps this is a common issue that somebody here knows how to deal with. Apparently MS isn't allowing any more downloads of the iso so I'm pretty much stuck with the iso that I have an hoping that it's not really corrupt.

View 9 Replies View Related

Boot Mgr Not Found On Install Disk?

Dec 31, 2011

I have a digital download verson of Windows 7 Pro64 that i am trying to install over my Vista Home premium 32 install. I have burned the contents of the download to a DVD, however when i try to boot to the DVD it says BOOTMGR is missing. The file structure is the same on the 7 DVD as it is on the Vista disk, and both have BOOTMGR on the top of the Disk.I do have hardware that supports 64bit, and i can boot from the Vista CD, so i think the issue is with the burnt 7 Disk.

View 2 Replies View Related

Can You Install 7 Upgrade From A Dvd Boot Disk?

Nov 8, 2009

I am trying to install windows 7 upgrade from a bootable dvd. I get the prompt to install and then it thinks for a while and comes back with the message:"A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert it now.

Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."

I looked around the web and noticed this was a common issue with Vista, but I cannot seem to get it past this point. I have tried pointing it to any and all possible drivers I can think of for the IDE, SATA, motherboard, etc.

Then I decided to just try it from within windows xp, and it worked. I was able to install everything fine. So my question is if it can be installed from the disk like it appears everyone is saying, or if certain hardware requires it to be done from within windows.

I tried copying the driver folder from the system32 folder after 7 had been installed hoping the needed drivers would be in there, but when I browsed to it, it said no device drivers found.

Any suggestions around this? Is it even necessary? I am wanting a system that would be equivalent to formatting the hdd and then installing. Do I get that by installing within XP and then deleting the windows.old folder?

This is a relatively older Dell XPS 400, although everything worked fine once 7 was installed from within xp.

View 5 Replies View Related

Install Disk Fails To Boot Into Setup

Nov 22, 2009

I have downloaded windows 7 home premium upgrade ISO from the microsoft store. The burned the iso to disk using the image burner in windows.

My problem is that the disk will boot, and a "windows is loading" screen appears which only takes a minute. Then a windows background appears on screen with a cursor. That is all. No setup at all. What might be wrong here. I would like to make a bootable disk that works.

I can run setup from an OS, but that is not what I want to be able to do.

View 9 Replies View Related

How To Install The Removable Disk In Computer

Oct 22, 2012

how to install the removable disk in my computers.

View 2 Replies View Related

Got A New Unformatted Computer, Can't Get An Install Disk To Load

May 4, 2012

i bought a wiped comp on ebay, it's a dell latitude d800. it originally had xp on it, i'm trying to boot win 7 ultimate. problem is it has not been partitioned at all, when i turn it on it says "no boot sector on hard disk", then "no bootable devices--strike f1 to retry boot, f2 for setup utility" i tried going straight to the boot menu on startup and loading from the dvd drive, but it is saying the same message as before.

View 7 Replies View Related

Computer Freezes During Boot, And During Windows 7 Install?

Sep 3, 2010

I when I went over to my desktop after getting up this morning I found that it didn't react to me moving the mouse, and the screen stayed black even when I turned it on. I turned it off, then back on. It froze during the windows boot screen (black screen + logo ) It kept doing that. Tried System Restore, it froze during that too.On Windows 7 install it freezes during the Expanding phase at random points.What I've tried:Installing on another harddrive. (same result)Windows Restore Memory Diagnostic (no Errors)Chkdsk (not /r the short version, will have to make a boot cd to do that)

View 4 Replies View Related

Computer Will Not Boot, Asks For Installation Disk. Repair Doesn't Load

Jan 2, 2013

Today I booted up my computer and got a screen saying something went seriously wrong with my computer and that I should repair it from an installation disk. I load up windows onto a USB, boot it and click the repair option. It's been about half an hour and nothing has shown up. Is it still loading or perhaps something is very wrong with my PC?

View 2 Replies View Related

Computer Fails To Boot After Fresh Install Of Windows 7 Ultimate

Feb 13, 2012

Ok so after years of running XP, I finally got an external HDD to back all my crap on and Windows 7 Ultimate. I backed up all my stuff, ran the win7 DVD through start up, reformated my hard drive, installed windows 7.

It installed fine, rebooted a couple of times through the install, finishes, and logs me to the desktop. Its all working fine, I can use the net etc. I shut it down to restart it, and it doesn't start back up. It gets to the bios window where it decides to start off the dvd or hdd, just prior to where it should normally change to the 'windows is loading' screen, and just sits there, blinking and doing nothing.

I've done three installs, I took out the hard drive, reformated it with another computer, made sure it had a ntfs file system, everything, it's working fine. But every single time I install windows 7, It logs me into the desktop for the first time, I can do everything fine, but then if I Shutdown or restart, it hangs on the screen prior to windows loading. I can't even choose a boot option.

I've seen some ideas on other forums, pulling the power out, resetting the bios/cmos, changing boot sequence, unplugging all non-essential hardware.. nothing. It's like as soon as I install windows 7 my hard drive isn't there anymore.

Specs:
Abit AX78 - Latest BIOS version
AMD 9950 quad core 2.6
4GB DDR2-800
ATi HD 5870
Western Digital 500GB

View 14 Replies View Related

Windows 7 Disk Boot Failure Insert System Disk And Press Enter?

Jan 5, 2012

windows 7 disk boot failure insert system disk and press enter

View 1 Replies View Related

Disk Boot Failure Windows 7 No Disk

Mar 25, 2012

I tried to add a new 1TB HDD into my computer. not realizing what i was doing wrong. i just threw it in there no software or anything. now my PC is getting "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" and i no longer have my windows 7 disk. is there anything i can do ?

View 1 Replies View Related

Computer Won't Boot Up To Install Restoration Files?

Aug 24, 2012

When I lost my internet connection I tried to uninstall my wireless program to re-install it. The windows installer wouldn't uninstall so I loaded files from the computers internal restoration disk to repair some old files. Now my computers not working at all. It won't boot up to install the restoration files. It might tell pop in a restoration disk and then say it can't boot up from a dvd drive. How do I boot up my computer and install the new system?

View 1 Replies View Related

Computer Won't Boot After ATI FirePro V5700 Install

Jan 6, 2012

I have a ASUS M5A78L-M-LX mother board. When I install the FirePro neither monitor will respond.Inserted correctly.Also when inserted, the VGA on the mother board will not work. Once removed the VGA works?

View 2 Replies View Related

Long Boot Times On New Computer After Install Of Equipment

Jul 9, 2012

I recently purchased a new PC and it was working very well the first few days. I eventually installed a power source and video card from my previous computer into my new computer, and I began to have issues. When I boot up computer, I will see a solid underscore for about at least a minute before it finally boots up. Previous to this, it would boot up in under 10 seconds. I installed an Antec earth watts 500 and a nvidia gts 450. I updated the drivers. Other factors: Installed avg free, malwarebytes free, installed a couple of games and some programs like MSI Afterburner. I scanned my entire system with both of the security programs listed earlier. I checked my connections inside the computer and everything is snug and secure. I couldn't see any issues.

View 2 Replies View Related

Gigabyte GeForce 6600 Driver Install Causes Computer To Not Boot?

Apr 25, 2012

What can I do to make my graphics card work perfect but not messing up the pc I have tried downloading the drivers got hold of various versions tried them but they kept on giving me the problem, with a black screen after window logo loading.

View 9 Replies View Related

Hard Disk Boot Failure Insert System Disk Press Enter

Mar 29, 2012

im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.

View 6 Replies View Related

Disk Boot Failure, Insert System Disk And Press Enter?

Aug 27, 2011

I woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.

View 5 Replies View Related

Disk Boot Failure, Insert System Disk And Press Enter

Oct 13, 2010

I've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.

View 9 Replies View Related

BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER

Feb 17, 2010

I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.

However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine.
I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?

View 10 Replies View Related

Disk Boot Failure Insert System Disk And Press Enter

Jan 10, 2013

My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order

View 3 Replies View Related

Disk Boot Failure, Insert System Disk

Sep 5, 2011

When starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.

View 3 Replies View Related

Does Repair Disk Include All Software On The Computer At Time Disk Was Made

May 31, 2012

After I got my new laptop, I installed antivirus, windows updates, etc, removed bloatware and installed the software that I actually use. Then I created my System Repair disk (single disk). Does this disk include all software and windows updates that were on my computer at the time I created the disk? I have read that System Repair disks will only have the factory settings of Windows 7, but I don't know if this is the case for all System Repair disks or only those that came with the computer and were made before the computer was purchased?I've also read that a System Repair disk could include a system image. Is this true and done by default when the System Repair disk is created?

View 1 Replies View Related

Cannot Install 0x80070714 When Try To Install Windows 7 Into Clean Disk / Installation Just Stops

Feb 13, 2013

I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved