Unable To Remove Raid

Jun 18, 2011

Cloned the 2 hdds to the single using Norton Ghost. It works fine and the PC boots no problem - but only if the bios (Asus) is set to 'configure sata as RAID'. If I change to 'configure sata as IDE' it won't boot (bsod during windows loading screen).

The PC clearly thinks the new, single hdd is still a raid system - which presumably could cause problems when I upgrade the mobo. I have tried Windows 7 repair, fixmbr, fixboot, rebuild bcd... none of it makes any difference!

View 9 Replies


ADVERTISEMENT

Cannot Remove The RAID

Jun 13, 2011

I did have 2 hdds in RAID 0, and wanted to switch to a single disk (so I could swap the motherboard without issue).Cloned the 2 hdds to the single using Norton Ghost. It works fine and the PC boots no problem - but only if the bios (Asus) is set to 'configure sata as RAID'. If I change to 'configure sata as IDE' it won't boot (bsod during windows loading screen).The PC clearly thinks the new, single hdd is still a raid system - which presumably could cause problems when I upgrade the mobo. I have tried Windows 7 repair, fixmbr,fixboot, rebuild bcd... none of it makes any difference! How can I get the PC to realise it's just a single disk?

View 4 Replies View Related

Remove RAID Members Without Losing Data?

Oct 3, 2012

I purchased an internal bay that supports 3 removable SATA hard drives. I had 2 hard drives (1-OS, 1-Data). When I installed the unit, one the first boot, I could see both drives.One the second boot, It had formed a RAID 0 to show it as one large drive. Reason for install was to have 2 different boot drives that would utilize the remaining drive as a data disc. Now when I try to decouple them, it says I will lose all data.

View 3 Replies View Related

Office 2010 Unable To Remove It From Add/Remove Programs?

Jul 25, 2011

I am attempting to uninstall (and then reinstall) Office 2010 Prof Plus. I am not able to remove it from Add/Remove programs, have read through some help info and attempted to use the Windows Fixit, Revo & Ripoutoffice2007, none of which have removed it (Revo didn't take it out and then pulled up a million 'left over' files, none of which I deleted).

View 2 Replies View Related

Toshiba M400 RAID Utility Removal - Installer Unable To Detect HDD

Jan 13, 2011

I'm currently reformatting my Toshiba M400-S5032 to install Windows 7. Problem is that due to the PC coming with a RAID utility, the installer is unable to detect the HDD. How to get rid of the RAID?

View 4 Replies View Related

Fixed "Unable To Load RAID Drivers For Windows 7 Installation"?

Nov 29, 2012

I am currently attempting to install Windows 7 on an SSD RAID Array, and I have encountered several issues (this has been a one step forward, two steps backward affair). The issue that I am currently facing is the fact that I am unable to load RAID drivers during the OS installation.As is normal for this kind of installation I choose "Custom" and I cannot see any drives listed, this is the point at which I click on "Load Drivers" and then I select "Browse". My challenge is that regardless of how I "insert the drivers", which is to say whether I put them on a separate USB drive (FAT32 partitioned), or take the Windows 7 installation DVD out and insert a CD with drivers - I simply cannot navigate to the drivers.Because I am unable to load the RAID drivers I simply cannot proceed with the OS installation.*** Note ****As of writing this I came across a program called RT Seven Lite, which has allowed me to create a "slip streamed" Windows 7 installation - using the program I was able to integrate the troublesome drivers into the Windows 7 installation disk.

View -1 Replies View Related

Windows 7 Raid 0 Setup / Missing Raid Controller Driver

Nov 19, 2011

Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..

View 1 Replies View Related

Pci Sata 6 Raid Card That Has At Least 4 Slots For 4 X 2tb Hard Drives For A Raid 5?

Aug 24, 2012

I need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5

View 3 Replies View Related

"Unable To Load RAID Drivers For Windows 7 Installation"

Nov 28, 2012

I am currently attempting to install Windows 7 on an SSD RAID Array, and I have encountered several issues (this has been a one step forward, two steps backward affair). The issue that I am currently facing is the fact that I am unable to load RAID drivers during the OS installation.

As is normal for this kind of installation I choose "Custom" and I cannot see any drives listed, this is the point at which I click on "Load Drivers" and then I select "Browse". My challenge is that regardless of how I "insert the drivers", which is to say whether I put them on a separate USB drive (FAT32 partitioned), or take the Windows 7 installation DVD out and insert a CD with drivers - I simply cannot navigate to the drivers.

Because I am unable to load the RAID drivers I simply cannot proceed with the OS installation.

As of writing this I came across a program called RT Seven Lite, which has allowed me to create a "slip streamed" Windows 7 installation - using the program I was able to integrate the troublesome drivers into the Windows 7 installation disk.

View 5 Replies View Related

Unable To Add / Remove Programs

May 24, 2012

So, I wanted to free up some space on my hard drive, and I found this. The funny thing is, I don't even have 2.95 TB on my hard drive. Its a 640 GB. Anyway, I was wondering if any on here could tell me a way to fix this problem, and to get the "Uninstall or change a program" feature to stop lying to me.

View 1 Replies View Related

Unable To Safely Remove?

Mar 31, 2011

I'm having a little problem with safely removing any of my external hard drives that I connect. The USB icon will show in the taskbar and when I place my mouse over it, it says Safely Remove Hardware and Eject Media. But when I click it, it won't show the external drives to eject. I have even tried to the eject option by right clicking my external drive in my computer. But the eject option is not there anymore. Can anyone help me with this

View 9 Replies View Related

Unable To Remove USB Device?

Feb 25, 2012

For quite some time I have been unable to to eject any USB/external hard drive devices that I have plugged into my computer. Using Process Explorer I've looked at the processes that are interfering with being to be able to eject devices.

Even if I do not have any files or programs open from that device, each one will have two explorer.exe processes running. However when I use find handle with Process Explorer on my main external hard drive there are these several processes running.

System I:$Extend$RmMetadata$TxfLog$TxfLog.blf
System I:$Extend$RmMetadata$TxfLog$TxfLogContainer00000000000000000001
System I:$Extend$RmMetadata$Txf
System I:$Extend$RmMetadata$TxfLog$TxfLogContainer00000000000000000002
svchost I:System Volume Information racking.log
svchost I:$Extend$ObjId
explorer.exe I:
explorer.exe I:

I am able to Close Handle on the explorer and svchost processes, but when I try on the system ones I get an error message reading, "Error opening process: the handle is invalid".

have to shut my comp down every time I want to eject.

View 2 Replies View Related

Unable To Remove History

Mar 12, 2012

i have lost the favorite bar on my home page so i am unable to access the history

View 2 Replies View Related

Bios Change From Raid To Non Raid On Dell Xps435

Jan 1, 2013

I had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.

View 4 Replies View Related

Unable To Safely Remove External Hdd?

Jan 30, 2011

I am unable to remove my external HDD (Samsung S2). I installed Usb safely remove, but without any success. It won't work with forced stop either.

View 8 Replies View Related

Unable To Remove Read Only Attribute

Dec 18, 2012

I use Adobe Lightroom 4 to manage my photos. I had to reload my photos the other day. Today I was making changes in the data in my photos, when I finshed and saved the data I recevied a message that the photo was Read Only. Inless I get this resolved I will not be able to edit any of my prints.

View 4 Replies View Related

Converting To Raid 0 Windows 7, Not Hardware Raid 0

Apr 25, 2012

I have tried to find the way to do this, but without success as I cannot see the wood for the trees.

I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.

View 2 Replies View Related

Raid Better With MB Config Or Separate Raid Controller

Aug 12, 2012

Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?

View 1 Replies View Related

Unable To Hide Program In ADD/REMOVE PROGRAMS?

Oct 9, 2010

Unable to Hide Program in ADD/REMOVE PROGRAMS..........

View 2 Replies View Related

Unable To Remove Any Registry Key In The HKEY_LOCAL_MACHINE Hive

Jun 26, 2011

I cannot, for the life of me, delete any key in the HKLM hive. Things I've tried: Logging in as administratorRunning an elevated regeditSetting Full Permissions to edit the keyTaking ownership of the keyDoing all of the above in regedt32Running in safe modeMalwarebyte's Reg AssassinReinstalling Windows (I didn't reinstall for this purpose, I had a different reason for doing so, but the reinstall didn't change anything.)I'm running Windows 7 Ultimate.

View 9 Replies View Related

Unable To Remove 'Mous Without Borders' Splash?

Aug 14, 2012

I installed Mouse without Borders but when I realized that it would not work across the internet, I uninstalled it. I still get the splash on my screen when I start the computer. How do I get rid of it?

View 1 Replies View Related

Remove AVG From Screen Unable To Access Mails

Jan 22, 2012

want to remove AVG from my laptop AVG is preventing me from accessing my emails what should I do I want easy access to my mails.

View 1 Replies View Related

Unable To Remove Program From Control Panel In Windows 7

Jan 11, 2012

Unable to remove windows essentials from control panel. receive a message saying it is removed but it is still listed and the icon remains. Also, another problem is that I cannot get into my windows mail. receive notes that wlidcli.dll and msmail.dll is missing and needs to be installed. receives codes 800ccc0f and 0x0040609. How do I either reinstall the missing drivers? and/or remove the program from my computer. Info Utility version 1.0.0.2

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU 540 @ 3.07GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3895 Mb
Graphics Card: Intel(R) HD Graphics, 1723 Mb
Hard Drives: C: Total - 943709 MB, Free - 898514 MB;
Motherboard: Dell Inc., 0C2KJT
Antivirus: Microsoft Security Essentials, Updated and Enabled

View 5 Replies View Related

Unable To Remove KB940289 To Install MS Office 2010?

Aug 22, 2010

When I want to install windows office 2010 x64 it gives me error "you cannot install the 64-bit version of the office 2010 because you have 32-bit office products installed".he 32-bit office product which is installed in my computer is "Compatibility Pack for the 2007 office system" that is KB940289. I uninstalled every piece of Microsoft Office 2007 but I can't uninstall KB940289. I tried all the 3 Microsoft fix this installer clear utility but It cannot uninstall KB940289. Unless the KB940289 is uninstalled it won't let me install Windows office 2010.I don't want to format my computer just for removing KB940289. Do you guys have any idea how to remove it?

View 2 Replies View Related

Unable To Remove Or Find The File Name For Bear-share?

Feb 9, 2013

how con i remove bear share from my computer

View 2 Replies View Related

Unable To Remove Norton Security Scan As It Claims To Be Always Running?

Jan 15, 2013

My laptop has suddenly seized up and I think it might be to do with a security conflict - Norton security scan appears to now be on my laptop through, I think, some vigorous pop-ups which must have got past me. I've just installed - reinstalled - AVG 2013 (no idea why I lost it in the first place) so feel reasonably protected and want to try to get rid of Norton Security Scan to see if that unblocks the slowness. But it won't uninstall, claiming always to be running.

View 1 Replies View Related

Hardware RAID 1 To Windows 7 RAID 1

Jul 10, 2012

I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.

View 1 Replies View Related

SB600 ATI RAID AHCI Drivers? (BSOD On Boot If In RAID/AHCI Mode.)

Jan 6, 2009

anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).

Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.

(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)

I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.

Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.

Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.

View 0 Replies View Related

Unable To Remove The Cyberlink Folder From The Program Files Folder?

Sep 9, 2012

I am unable to remove the cyberlink folder from the Program Files folder I am getting the following error message

View 5 Replies View Related

Unable To Remove Old Program And Thus Cannot Install New Program

Feb 25, 2012

I have been using a program called Raw Therapee. I downloaded a new version and on installing it quit saying the old version must be removed. I could not find it listed in Revo Unistaller Pro, so I did a forced uninstall with the location of the main executable. This removed a lot of stuff. I checked the program folder and the folder and many files were still there, so I deleted them. I did a CCleaner in between and after. I then unhide and show system files and deleted the folders in the Appdata of main user and admin account, couldn't find it anywhere else.
CCleaner again and reboot. Went to install the new version again and it claimed that the old version was still installed. I did a search for *aw The* and found an entry in the hidden Program Data Folder. In the Admin account it will not let me in this folder to delete any remnants of the old version of Raw Therapee.

View 5 Replies View Related

Remove Flash Memory Without Removing Safely Remove?

May 23, 2011

can i remove my flash memory without removing safely remove

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved