So I have a 64MB SSD that I use as my boot drive, then I have 1TB in SATA. I have Windows loaded on my SSD and everything works great. What I want to know, how do I move the primary drive to the SATA? Right now, SSD is "C" and SATA is "E".
View 12 RepliesIn switching over from XP to 7 I found myself also buying almost all new components, except hard drives. Due to a number of events that no one would believe humanly possible, I managed to establish my "C:" and "D:" drives on hard drive 1, whereas hard drive 0 is a bunch of free space. The computer boots up to Windows 7 on "C:" on HD 1.
I want to switch cables on the SATA drives and then designate the new HD0 (which was HD1) as the primary active partition, but as we all know, I can't just switch cables as then the computer does not know to boot off HD0.
What the heck do I do to accomplish this?
I have two other hard drives in my computer. My operating system now is on "E" drive. I'm wanting to replace my "E" drive with a larger and faster drive.
I am currently backing up my entire "E" drive on my "C" drive.
Is it possible to simply pull out my current "E" drive and install a new "E" drive and then restore my backup to my new "E" drive? Or is it more complicated than that?
I had 3 drives. my windows7 was installed on drive C. And I had 130GB unallocated space. I wanted to make new drive in this space with Minitool Partition Wizard.I read in mintool site that you can only have 3 primary drives. My E Drive was not important for me and I convert it to a logical drive and made a restart.Buuuut after restart my Windows 7 wont boot. Now I have fedora 15 and I see that all my drives and files are ok.
View 1 Replies View RelatedI've had a Windows 7 PC that's motherboard recently broke so I have been trying to use the hard drive with another PC. The PC I'm trying to put it into has all Windows 7 compatible parts. I get to the starting windows screen and it restarts the computer and gives me the option to Launch Startup repair. I launched startup repair and it says that it cannot fix the problems automatically. I can hookup the hard drive as a secondary hard drive and access all of the files on it but I cannot make it primary it just wont boot. The computer that the hard drive originally came from did not include a recovery/install CD.
View 1 Replies View RelatedI've just installed windows 7 ultimate 64 bit on my new laptop and when I checked my computer only one local disk was visible. When I checked disk management, this was the one shown. The disk has no name and file type.
View 4 Replies View RelatedI bought a new 2 Tb hard drive because my primary one was getting full. I would like to do a fresh install on the primary drive once I have moved over all the games, videos, pictures, etc. that I don't want to lose. I can format the primary drive and reinstall windows without affecting the content on the second drive, correct? Is there anything I need to know?
View 7 Replies View RelatedI'm having an BSOD error, and it also refuses to write a minidump and kerneldump. So I can`t use any analysis tools. And yes, it's enabled!
Stop message: *** STOP: 0x00000F4 (0x0000000000000003, 0xFFFFFA800F209B30, 0xFFFFFA800F209E10, 0xFFFFF80003787240)
After restart it sometimes does not find the primary hard drive. The error pops up from time to time. Sometimes from browsing the web, downloading or playing a game. It even pops up while I`m not doing anything at all. I did a checkdisk and it turned out clean.
I installed Ubuntu on a older Toshiba laptop. When I boot up it asks me to select either Windows 7 or Ubuntu. I want to get rid of the Ubuntu disk partition and give that 2.9 GB space to my primary hard drive. I go into compmgmt.msc but I can't execute any commands on that disk partition.
View 3 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedIs it possible and feasible to change the hard drive to a solid state drive on a Toshiba Satellite Pro L300-1FK laptop.
View 5 Replies View Relatedback to make my main partition (C: ) where I installed windows only 50gb big. What I wonder is, is it possible to decrease the second partition in size and move that extra size to the main partition without damaging data on both partitions?
View 5 Replies View RelatedBasically i brought an OEM version of windows the other day ,Installed fine and all was going well till my hard drive started playing up. So iv invested in a new hard drive but....how do i go about uninstalling this copy and putting it on the new drive, Because i was told it could only be installed on one pc ?
View 2 Replies View RelatedThis is quite a problem, I have a very small HDD that i was forced to use instead of my 700GB external HDD. How can I change this? Changing the path would not work due to it being the path of the small drive being "C"
View 7 Replies View RelatedWindows 7 Home Premium Under Windows Explorer 'Computer' all of the my drives and storage devices are listed. I am trying to change the icon associated with my esata external hard drive.
View 1 Replies View RelatedI have built a computer for video editing and named the hard drives (C for the main drive, (M for the drive holding my music, (P for the drive for photos, and I named the drive to store my videos (V. However when I tried to write path to the V: drive I was told V: is an invalid path, I suppose because of the confusion with a followed by a / which would give you a / which can be confused with V but is not exactly the same. I went to My Computer and right clicked on the V: drive and clicked on "rename" in the drop down menu and changed the name to "Storage" but the (V persisted. Then I renamed again and named the drive "Storage (S" and now in "My Computer" the drive is shown as "Storage (S (V" When writing a path to put videos on this drive can I use either S:/ or V:/ to get videos into this drive? Is there some way to remove the (V
View 2 Replies View Relatedhow can i change a hard drive in a touch smart 610 hp, but i do not have cd for all the window 7 and audio programs.
View 3 Replies View RelatedI just re-replaced my Segate ST31000340AS with a new Segate ST32000641AS (64m / 600mb) double the old drive. Did a clean install the 5.9 number did not change. Anyone knows why?
View 13 Replies View RelatedI have a toshiba satellite laptop and had to replace the hard drive. I am trying to reload Windows 7 from a USB. I went into the settings and changed it to boot from USB but the computer is not recognizing it. It gives me a black screen that says "Check cable connection! PXE-MOF: Exiting Intel PXE ROM. No bootable device--insert boot disk and press any key" I also have tried using a Windows 7 upgrade cd that says it contains the full version but got the same message.
View 3 Replies View Relatedi haved shrinked my hard and the disks are now dynamic and with green border in the top
View 1 Replies View RelatedI just built a new desktop, got a 60GB SSD to boot Windows7 (and maybe a couple applications) from, and a 1.5TB HDD for storage. I'm trying to change the default location of My Docs, Downloads, etc from the SSD to the HDD (maybe change the location of the whole User folder?) so that my SSD stays clean with just the necessities.My problem is that I can't access the right-click menu that allows you to change the default location.Note: When I first installed Windows 7, all of my SATA ports were in IDE mode. I was able to access the "change folder location" menu for My Docs, etc, at this time. I changed the SATA port with my SSD to AHCI mode, which really boosted the boot speed, but I couldn't access the menu anymore after that.
View 2 Replies View RelatedI have two 1TB drives, each containing 4 partitions, used for backing up 4 computers. These drives are regularly switched between buildings as part of our backup strategy, always having one off-site. I have assigned drive letters M,N,O,P to respective partitions. When I swap the drives, the drive letters get reset and have to be manually reassigned. assigning the drive letters, including USBDM, but get no results.
Computers: HP Compaq 8200 Elite - CMT - 1 x Core i5 2500 / 3.3 GHz - RAM 4 GB - SSD 1 x 160 GB - DVD�RW (�R DL) / DVD-RAM - HD Graphics 2000 - Gigabit Ethernet - Windows 7 Professional 64-bit - Intel vPro Technology Docking Stations: ICY DOCK MB877SK Hard Drives: SAMSUNG Spinpoint F3 HD103SJ 1TB
Its possible to move my Primary partition to another Hard disk? I have 160GB seagate and i want to buy 80GB hard disk to move my Primary partition(160GB seagate) in 80GB hardisk?
View 3 Replies View Relatedi have a hard drive, but the problem is, my little brother set up a password on it.. i think he messed with the bios, and he forgot the password he set, and i got all my important data in it.. i tried to remove the hard disk and try to access it from another computer, but the hard disk is still protected by the password, and i reset the BIOS but password rested
View 6 Replies View RelatedI recently purchased a new motherboard. After reinstalling windows, I noticed that my primary partition is also on my Storage Drive. Is there a way to change it back to only the SSD?
View 2 Replies View Relateda friend is trying to download a big file from an ftp program to his pc, unfortunately it keeps downloading to his 30G partition that only has windows on it instead of the 1TB drive he's designated for download. The question is, how can he ensure that windows will download ftp files to his 1TB with plenty of room instead of downloading it to his Windows 7 partition drive? He says that Windows creates a ghost temp file of what he's downloading on the 30G and thats why he's having this issue..
View 1 Replies View Relatedhow can i convert extended drive to primary drive while doing allocation of drive during allocation of drive
View 2 Replies View RelatedMy disk crashed and had to reload everything, I took it to Toshiba service center. Before the crush my hard disk was just one big physical disk now I have: C: physical 150.84 GB(boot, page file, crush dump, primary partition)If so can you please tell me how to do it, never done this before, partitioning, and I don't want to make a mess out of it.
View 8 Replies View RelatedAny good guide or book I can read for SSD's. I wanna learn which one to choose, how to install. Wanna use it as a primary drive for the OS, and have a secondary drive. How to setup my OS and computer to do that.
View 9 Replies View RelatedI have a new Laptop with Windows 7 Home edition (factory installed). It has only primary C: partition.
Is there any tweak to partition the HDD directly using windows without re-formatting the HDD
I just got my laptop back from Acer and they had given me a new hard drive. I restored a disk image backup that I had made from Acronis True Image. The backup seemed a little strange going in, but none the less it worked anyway. I then went to Disk Management to look at the setup and noticed that my primary partition is now listed as a Logical. I'm posting a screen shot of the partions and someone tell me if that looks right to them and if not how do I get my C drive back to Primary. As I said it boots ok but when I did the recovery with Acronis it didn't seem to go as smoothly as it should have.
View 9 Replies View Related