Change Simple Volume To Primary In Disk Management?
Jul 25, 2011i haved shrinked my hard and the disks are now dynamic and with green border in the top
View 1 Replies
ADVERTISEMENT
Disk Management Tool Won't Allow New Simple Volume
Feb 8, 2012I'm trying to create a new simple volume in 130 GB free disk space. There's no obvious reason why it would refuse to do so - I'm not at the hard limit on number of partitions or anything - but disk management MSC is consistently returning "Not enough space" errors. The only thing I can think of is something to do with the partition order, but if so I have no idea how to fix it non-destructively. I'm in the middle of backups on it, so deleting partitions is a no-go. At the moment I don't understand what's going on.
DISKPART output (Win 7 x64):
Code: DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 232 GB 134 GB
[code].....
Logical Partitioning In Disk Management - Only Getting Simple Volume Option?
Sep 22, 2011When I select unallocated space in disk management All I get is "New Simple Volume" option. How do I create an extended partition and then logicals on it? I can do this ever so easily in gparted and may resort to that but a bit infuriated at how clunky this seems in disk management.
View 1 Replies View RelatedConverting Simple Volume To Primary Volume?
May 11, 2010[email]amtemirak@hotmail.comSpoiler :[spoiler]
View 1 Replies View RelatedConversion Of Drive C Simple Volume To Primary Partition Windows 7?
Jun 3, 2011i had windows 7 OS in drive c . while i was partitioning drive c using disk management, disk 0 which has all recovery image drive c were converted to simple type.
View 5 Replies View RelatedVolume Shrink In Disk Management
Dec 10, 2012I want to shrink my C drive. The volume shrink in disk management. It says that it is corrupt run chkdsk (something like that) SO I run the error checking and restart. Then it says error can fix error (some long thing with a billion numbers. Then it says run system recovery from control panel to back date the c drive to a before hand restore. So I go through that but right at then end the last button to push it says error on c drive first run error checking.
View 3 Replies View RelatedShrink Volume Option In Disk Management
Apr 22, 2012I used Shrink Volume option in disk management and then create new volume of the un-partition volume,after that desktop restart and windows corrupt,I am installing windows 7 professional,after license agreement the 0xE0000100 error coming,i have tried to install XP also but could not install.
View 2 Replies View RelatedShrink Volume Support In Windows 7 Disk Management?
Aug 14, 2012Windows Disk Management utility has provided Extend / Shrink volume support.I got to knowthat FSCTL_SHRINK_VOLUME ioctl is provided for supporting shrink volume feature.I am interested to know what support is provided by File system driver and otherstorage modules to achieve shrink volume feature.Actually Linux does not have support for online shrink volume. So interested to know what are the support provided by Windows storage stack.
View 2 Replies View RelatedChange Of Physical HD Designations In Disk Management?
Jan 11, 2011I have a Dell Studio XPS 9100 computer with Windows 7 Prof installed. The computer has two physical hard drives that came with the computer. The seccond physical hard drive was not partition or formatted when I received the computer. I divided the second physical HD into three partitions, Page File (D), Image Backup (E), and Data Backup (F). The first physical HD had the following volumes when it came from Dell: OEM partition (39 mb), Recovery partition (10.8 gb), and OS (C) (71 gb)When using Disk Management, normally I would see the HD designation of Disk 0 for the OEM partition, Recovery partition and OS (C) partitions This morning after booting up the computer and looking at Disk Management, I am now seeing the volumes for Disk 0, Page File (D), Image Backup (E), and Data Backup (F). For Disk 1, I am now seeing OEM partition, Recovery partition, and OS (C) partitions.Is it possible for physcial hard drive designations to change and still have the computer operate normally?
View 6 Replies View RelatedPartitioning Windows 7 Primary Volume?
Sep 14, 2012my pc operating system is installed in c drive which is 25 gb in size, and d drive is 50 gb.is it possible to shrink 5 gb space of d drive and add it to c drive?
View 6 Replies View RelatedDynamic Volume To Primary Partition
Apr 6, 2011I'm currently running Win XP Pro. on dynamic disks with the system partition mirrored.I have a 20GB simple volume on one of the dynamic disks which I had intended to install a copy of Windows 7 Enterprise on, intending to dual-boot as I changed over from XP to 7, but it appears that you can't install Windows 7 on a dynamic disk as "setup cannot find a location for temporary files." According to Microsoft my only option is to revert the existing dynamic disk/s to basic - losing everything on it including my XP installation.Microsoft says not to mix volumes and partitions on the same disk, but a third party application called Dynamic Disk Converter claims to be able to change simple volumes back to primary partitions - though it isn't clear from the documentation if this can be done to just one volume out of several on a dynamic disk.My options appear to be:
1. Get another hdd for Windows 7.
2. Break the XP mirror and convert one dynamic disk back to basic for Windows 7 - losing my RAID protection
3. Ignore Microsoft's advice and see if Dynamic Disk Converter actually can convert a simple volume back to a primary partition, risking my whole installation.
Can't Create New Simple Volume
Sep 13, 2012wondering if this is a limitation of having 4 primary partitions.my lenovo came with 4 primary partitions (all tagged with dark blue color in diskmgmt):
[code]...
I can shrink the 650gb by say 300gb, and it will make a 350gb unallocated partition.If i try to create a new simple volume from the 350gb, disk mgmt throws errors saying 'not enough space to complete operation'
Why Drive C Changed Into Simple Volume
Oct 24, 2011My all partition turned into simple volume. What do I have to do?
View 2 Replies View RelatedCan't Extend Volume In Computer Management
Feb 5, 2011I am am running Windows 7 64, and my C drive was 150GB, and the other drive was 450GB. I decided to extend or expand it by deleting one of the volumes. However, I have come across a speed bump while doing this. After deleting my unused partition which was 450GB, and right clicked on the C drive to extend, but the extend option is greyed out. The shrink volume seems to be clickable though.
View 5 Replies View RelatedReplace Disk 1 With Disk 0 In Computer Management?
May 18, 2010Its a bit complicated to state my situation, anyways, I have 2 HDD, and the PC won't boot if I removed the old HDD even though I've formatted the old HDD and win7 is on the new HDD.I have 2 physical HDD in PC
(1) 80GB old hdd and noisy. (not SATA)
(2) 500GB SATA hdd and sexy.
My powersupply only supports 1 SATA connection, and I don't have a DVD-Rom.I've unpluged the (2) and replaced it with my dad's SATA DVD-Rom to clean install Win7 64bit on the old (1), after I've finished, I removed the SATA DVD-Rom, I plugged back the (2), installed Win7 64bit ISO again from the (1) on (2), then I organized everything and split the (2) to E: and F:.
Everything's fine until I wanted to remove the old noisy hdd. When I did that, the PC started to bitch on me and didn't want to boot from (2).I've tried to rename (2)'s letter to C:, but it gave me 'invalid parameter' error. I doubt that it'll work by itself since it'll need to rename all the softwares' locations and stuff.so I went through another way, renaming (1) to a random letter like K: and wishing that'll work, I've restarted, shutdown'ed, and unplugged (1), didn't boot from (2).So it left me with only and only solution is by clean install, -but- I can't do it since I don't have an old dvd-rom nor do I have 2 SATA PSU cables... so I go back to the begging and...know that I have only 1 option by installing the win, is by the iso.
Now, what I'm thinking is that there's a possible way(maybe?) that I can replace Disk 0 box by Disk 1 box.Here's a picture to clarify it.So that's it, notice the 2 boxes down there? I'd like to switch Disk 0 by Disk 1 and then remove the old crappy 80gb hdd.
Disk Numbers In Disk Management Matters?
Jun 26, 2010After adding two new SATA hard drives in my computer, I noticed that Disk Management lists SATA Drive C (which contains Win 7) as Disk 2. The other two drives are listed as Disk 0 and Disk 1.Since I connected SATA Drive C in SATA port 1, I was expecting to see it listed as Disk 0. SATA drives D and E are connected to SATA port 2 and 3 but are listed before the one connected in SATA port 1. And since the computer seems to work fine, I'm wondering if the disk numbers listed in Disk Management matter at all?
View 9 Replies View RelatedChange Primary Partition Size?
Jul 24, 2011back to make my main partition (C: ) where I installed windows only 50gb big. What I wonder is, is it possible to decrease the second partition in size and move that extra size to the main partition without damaging data on both partitions?
View 5 Replies View RelatedChange Active Primary Drive
Nov 28, 2009In switching over from XP to 7 I found myself also buying almost all new components, except hard drives. Due to a number of events that no one would believe humanly possible, I managed to establish my "C:" and "D:" drives on hard drive 1, whereas hard drive 0 is a bunch of free space. The computer boots up to Windows 7 on "C:" on HD 1.
I want to switch cables on the SATA drives and then designate the new HD0 (which was HD1) as the primary active partition, but as we all know, I can't just switch cables as then the computer does not know to boot off HD0.
What the heck do I do to accomplish this?
Change Primary Hard Drive?
Nov 18, 2011So I have a 64MB SSD that I use as my boot drive, then I have 1TB in SATA. I have Windows loaded on my SSD and everything works great. What I want to know, how do I move the primary drive to the SATA? Right now, SSD is "C" and SATA is "E".
View 12 Replies View RelatedMigrate Primary Partition To Another Hard Disk?
Aug 25, 2012Its possible to move my Primary partition to another Hard disk? I have 160GB seagate and i want to buy 80GB hard disk to move my Primary partition(160GB seagate) in 80GB hardisk?
View 3 Replies View RelatedCan't Change Default Docs Location - SSD/AHCI Primary + HDD/IDE?
Aug 1, 2012I just built a new desktop, got a 60GB SSD to boot Windows7 (and maybe a couple applications) from, and a 1.5TB HDD for storage. I'm trying to change the default location of My Docs, Downloads, etc from the SSD to the HDD (maybe change the location of the whole User folder?) so that my SSD stays clean with just the necessities.My problem is that I can't access the right-click menu that allows you to change the default location.Note: When I first installed Windows 7, all of my SATA ports were in IDE mode. I was able to access the "change folder location" menu for My Docs, etc, at this time. I changed the SATA port with my SSD to AHCI mode, which really boosted the boot speed, but I couldn't access the menu anymore after that.
View 2 Replies View RelatedHard Disk Security Primary Master Lock?
Feb 4, 2013i have a hard drive, but the problem is, my little brother set up a password on it.. i think he messed with the bios, and he forgot the password he set, and i got all my important data in it.. i tried to remove the hard disk and try to access it from another computer, but the hard disk is still protected by the password, and i reset the BIOS but password rested
View 6 Replies View RelatedDisk Management Correct Layout
Jul 18, 2012I had a problem with Win7 not starting and the local shop I bought my computer from performed a Win7 reinstallation. I've just noticed a change in Disk Managagment which I'd appreciate clarification on. I'm running Win 7 Home Premium (64-bit)/TWO hard drives each 500Gb/8Gb of RAM, I also have TWO DVD-Rewriters.
View 2 Replies View RelatedDisk Management Bug With Ext3 Partitions?
Jun 25, 2011I've just ran into what appears to be a bug with Disk Management under Windows 7. THe problem seems to go back all the way to OS reporting themselves as NT 5.2 or greater. XP x64 has the problem, Win2K3 server does and Windows 7 does. I don't have any version of Vista to check, so I don't know for sure but I'd bet its there as well. THe 32-bit version of XP which reports itself as NT 5.1 doesn't have the problem.
At any rate, the problem is Disk Management seems to count all Linux partitions as primary, even those which are logical volumes inside extended partitions on MBR drives. As such, if this erroneous count exceeds 4, it will refuse to create any more primary partitions, even though there are less than 4 actual partitions in the MBR table.
who dual boot with Linux could confirm this behavior. I've reported it on some of the MS forums, but no one seems to be interested.
0 MB GPT Protective Partition In Disk Management?
Jul 30, 2012In the Disk Management, I have an extra 0 MB GPT Protective Partition. Is that normal?
View 4 Replies View RelatedDisk Management Boot Drive?
Apr 7, 2012I have a disk which is partitioned into 3 = 1 is just the mft files no drive allocated, c: is my operating system and d: was the operating system. I need to change C: to boot now rather than my d:. When i start up, I have to press f1 to get started and 2 win 7 shows up. I have to move the arrow down to select the second to boot up, how do I change it,
View 19 Replies View RelatedWindows Wont Load After Change A Drive Type From Primary To Logical?
Sep 13, 2011I had 3 drives. my windows7 was installed on drive C. And I had 130GB unallocated space. I wanted to make new drive in this space with Minitool Partition Wizard.I read in mintool site that you can only have 3 primary drives. My E Drive was not important for me and I convert it to a logical drive and made a restart.Buuuut after restart my Windows 7 wont boot. Now I have fedora 15 and I see that all my drives and files are ok.
View 1 Replies View RelatedDisk Management But Does Not Show In Windows Explorer
Nov 14, 2010My data hard drive is seen in disk management but does not show in windows explorer.I am using windows seven 64 bits.In disk management the drive shows: Layout: simple, type: basic, file system: NTFS, status: healthy(system-active-primary partition) How can I retrieve my data?
View 8 Replies View RelatedPartitioning Hard Drive Using Disk Management
Sep 22, 2011i bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
View 7 Replies View RelatedBringing A HDD Online In Disk Management Does / What To MBR Of That Drive
Nov 20, 2011I needed to copy files between two PCs and didn't have a USB big enough so I took the HDD out of my Dell Vista laptop and used it as an external drive to transfer the files I needed moving. When I connected it up to the destination PC running windows 7, the drive couldn't be seen in explorer. I had to bring the drive online in Disk Management in order to be able to explore the drive and take the files I needed off of it. All was OK until I put the drive back in the Vista laptop and then found that the drive wouldn't boot. All I get is a blinking cursor after the initial Dell logo screen. like as if the BIOS can't load the drive or something.Can someone please tell me what bringing a drive online in Disk Management does to the MBR of that drive?
View 5 Replies View RelatedSecond Harddrive Not Showing In Bios/disk Management
Dec 10, 2011So I am here because I am having some hard drive problems. Firstly for my Primary drive i am still running my old 250gb Hard drive (with windows already installed on this drive). Secondly, for my slave drive i have a Samsung Spinpoint 1TB Hard drive that wont display in my bios or in disk management. The 1TB drive seems to spin up fine etc. but i just can get it to display. i can format this new disk. Also i must add that my motherboard is an ASUS p8z68-v-pro board.
View 9 Replies View Related