Replace Disk 1 With Disk 0 In Computer Management?
May 18, 2010
Its a bit complicated to state my situation, anyways, I have 2 HDD, and the PC won't boot if I removed the old HDD even though I've formatted the old HDD and win7 is on the new HDD.I have 2 physical HDD in PC
(1) 80GB old hdd and noisy. (not SATA)
(2) 500GB SATA hdd and sexy.
My powersupply only supports 1 SATA connection, and I don't have a DVD-Rom.I've unpluged the (2) and replaced it with my dad's SATA DVD-Rom to clean install Win7 64bit on the old (1), after I've finished, I removed the SATA DVD-Rom, I plugged back the (2), installed Win7 64bit ISO again from the (1) on (2), then I organized everything and split the (2) to E: and F:.
Everything's fine until I wanted to remove the old noisy hdd. When I did that, the PC started to bitch on me and didn't want to boot from (2).I've tried to rename (2)'s letter to C:, but it gave me 'invalid parameter' error. I doubt that it'll work by itself since it'll need to rename all the softwares' locations and stuff.so I went through another way, renaming (1) to a random letter like K: and wishing that'll work, I've restarted, shutdown'ed, and unplugged (1), didn't boot from (2).So it left me with only and only solution is by clean install, -but- I can't do it since I don't have an old dvd-rom nor do I have 2 SATA PSU cables... so I go back to the begging and...know that I have only 1 option by installing the win, is by the iso.
Now, what I'm thinking is that there's a possible way(maybe?) that I can replace Disk 0 box by Disk 1 box.Here's a picture to clarify it.So that's it, notice the 2 boxes down there? I'd like to switch Disk 0 by Disk 1 and then remove the old crappy 80gb hdd.
I have five Sata drives. Of these five, Windows 7 Pro 64 "Computer management" reports that two of them still are 100% free despite both having significant usage as reported in "Computer" and "Explorer"
After adding two new SATA hard drives in my computer, I noticed that Disk Management lists SATA Drive C (which contains Win 7) as Disk 2. The other two drives are listed as Disk 0 and Disk 1.Since I connected SATA Drive C in SATA port 1, I was expecting to see it listed as Disk 0. SATA drives D and E are connected to SATA port 2 and 3 but are listed before the one connected in SATA port 1. And since the computer seems to work fine, I'm wondering if the disk numbers listed in Disk Management matter at all?
I have a 1TB hard drive partitions into a C drive and D drive. The operating system is Windows 7 64 bit. The C drive is my every day stuff, and I use D to store media, music, video etc. Today I wanted to access the D drive and it was not there. The C drive is listed as usual. I went to Disk Management and the missing D drive was not there as well. I don't know if this explains things, but I ran a partition analysis program and it showed 500 gigs as unallocated. But that space is also not noted in disk management. Right now I am running partition recovery software to see if the files are somewhere, but it will take a few hours.
I have searched google for ours trying to find a fix for this but to no avail.CD drive and virtual drives dont appear in my computer and whenever i put in a dvd nothing comes up.it appears in device manager and disc management however so i know there is nothing physically wrong with the optical drive. Under disc manager i can see the details about the dvd such as dvd name, size etc.i tried changing drive letter and path but unfortunately that doesnt fix it. the letter "applies" for a second then disappears again.
I have a 2nd HDD connected via USB and installed Ubuntu 11.10. The HDD with Ubuntu will be going into another laptop.Problem:Windows does not display the drive in "My Computer"Drive is showing up in disk management and BIOS. disk management will not allow me to assign a drive letter. Only option is "delete volume" Want to check the 2nd Ubuntu HDD with antivirus before I install it.
so i was trying to change my sound card, but the new sound card wasn't compatible with my computer. So i went ahead and put my old sound card back in, screwed everything back on. turned on my computer, and next thing i know it says, "disk boot failure, insert system disk and press enter". All i did was try to change the sound card. I don't think i unplugged anything else or moved anything around. I made sure everything was in securely too.
After I got my new laptop, I installed antivirus, windows updates, etc, removed bloatware and installed the software that I actually use. Then I created my System Repair disk (single disk). Does this disk include all software and windows updates that were on my computer at the time I created the disk? I have read that System Repair disks will only have the factory settings of Windows 7, but I don't know if this is the case for all System Repair disks or only those that came with the computer and were made before the computer was purchased?I've also read that a System Repair disk could include a system image. Is this true and done by default when the System Repair disk is created?
I had a problem with Win7 not starting and the local shop I bought my computer from performed a Win7 reinstallation. I've just noticed a change in Disk Managagment which I'd appreciate clarification on. I'm running Win 7 Home Premium (64-bit)/TWO hard drives each 500Gb/8Gb of RAM, I also have TWO DVD-Rewriters.
I want to shrink my C drive. The volume shrink in disk management. It says that it is corrupt run chkdsk (something like that) SO I run the error checking and restart. Then it says error can fix error (some long thing with a billion numbers. Then it says run system recovery from control panel to back date the c drive to a before hand restore. So I go through that but right at then end the last button to push it says error on c drive first run error checking.
I've just ran into what appears to be a bug with Disk Management under Windows 7. THe problem seems to go back all the way to OS reporting themselves as NT 5.2 or greater. XP x64 has the problem, Win2K3 server does and Windows 7 does. I don't have any version of Vista to check, so I don't know for sure but I'd bet its there as well. THe 32-bit version of XP which reports itself as NT 5.1 doesn't have the problem.
At any rate, the problem is Disk Management seems to count all Linux partitions as primary, even those which are logical volumes inside extended partitions on MBR drives. As such, if this erroneous count exceeds 4, it will refuse to create any more primary partitions, even though there are less than 4 actual partitions in the MBR table.
who dual boot with Linux could confirm this behavior. I've reported it on some of the MS forums, but no one seems to be interested.
I have a disk which is partitioned into 3 = 1 is just the mft files no drive allocated, c: is my operating system and d: was the operating system. I need to change C: to boot now rather than my d:. When i start up, I have to press f1 to get started and 2 win 7 shows up. I have to move the arrow down to select the second to boot up, how do I change it,
I have a Acer Laptop with windows 7 premium 64bit installed on it. Recently, when I start the laptop, it shows the error message: Smart Failure Predicted on Hard Disk 0: WD5000BEVT-22A0RT0-(S1)
Warning: Immediately back-up your data and replace your hard disk drive. Press F1 to continue.
After pressing F1, windows failed to boot and it stuck at black screen there. I decided to format the laptop.ok,this time my windows booted smoothly. But the problem is,the same warning came out once I start the laptop. After pressing F1, every thing works fine. This laptop is still under warranty period.
My data hard drive is seen in disk management but does not show in windows explorer.I am using windows seven 64 bits.In disk management the drive shows: Layout: simple, type: basic, file system: NTFS, status: healthy(system-active-primary partition) How can I retrieve my data?
I have a Dell Studio XPS 9100 computer with Windows 7 Prof installed. The computer has two physical hard drives that came with the computer. The seccond physical hard drive was not partition or formatted when I received the computer. I divided the second physical HD into three partitions, Page File (D), Image Backup (E), and Data Backup (F). The first physical HD had the following volumes when it came from Dell: OEM partition (39 mb), Recovery partition (10.8 gb), and OS (C) (71 gb)When using Disk Management, normally I would see the HD designation of Disk 0 for the OEM partition, Recovery partition and OS (C) partitions This morning after booting up the computer and looking at Disk Management, I am now seeing the volumes for Disk 0, Page File (D), Image Backup (E), and Data Backup (F). For Disk 1, I am now seeing OEM partition, Recovery partition, and OS (C) partitions.Is it possible for physcial hard drive designations to change and still have the computer operate normally?
i bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
I'm trying to create a new simple volume in 130 GB free disk space. There's no obvious reason why it would refuse to do so - I'm not at the hard limit on number of partitions or anything - but disk management MSC is consistently returning "Not enough space" errors. The only thing I can think of is something to do with the partition order, but if so I have no idea how to fix it non-destructively. I'm in the middle of backups on it, so deleting partitions is a no-go. At the moment I don't understand what's going on.
DISKPART output (Win 7 x64): Code: DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 232 GB 134 GB
I needed to copy files between two PCs and didn't have a USB big enough so I took the HDD out of my Dell Vista laptop and used it as an external drive to transfer the files I needed moving. When I connected it up to the destination PC running windows 7, the drive couldn't be seen in explorer. I had to bring the drive online in Disk Management in order to be able to explore the drive and take the files I needed off of it. All was OK until I put the drive back in the Vista laptop and then found that the drive wouldn't boot. All I get is a blinking cursor after the initial Dell logo screen. like as if the BIOS can't load the drive or something.Can someone please tell me what bringing a drive online in Disk Management does to the MBR of that drive?
So I am here because I am having some hard drive problems. Firstly for my Primary drive i am still running my old 250gb Hard drive (with windows already installed on this drive). Secondly, for my slave drive i have a Samsung Spinpoint 1TB Hard drive that wont display in my bios or in disk management. The 1TB drive seems to spin up fine etc. but i just can get it to display. i can format this new disk. Also i must add that my motherboard is an ASUS p8z68-v-pro board.
I used Shrink Volume option in disk management and then create new volume of the un-partition volume,after that desktop restart and windows corrupt,I am installing windows 7 professional,after license agreement the 0xE0000100 error coming,i have tried to install XP also but could not install.
I've worked on many before and as you know most of the time you can force a drive to spinup and cough up at least sOME data.... every now and then I get a harder case.
dealing with this caused a question in my mind: I have the bad drive [PATA notebook drive -seagate momentus] attached to a usb bridge device that I use for all such issues. in this case, when I do a fresh start, with the external bridge powered up before cold boot, once 7 Ultimate gets coherent I run disk Management - the scan will popup the box saying "this disk needs to be initialized" and I give it the go - it gives "device not ready".that does not surprise me since the drive seems to only spin [motor runs] sporadically.
What I'd like to know is: what is the applet "seeing" - what is it in disk management that recognizes there is something akin to a Disk out there on one of the device ports?the followon question would then be: what low-level tool can I use that can attempt communication with the drive's firmware to try to get a spinup command or something to give me a chance???
I have seen an old macintosh drive - WD if I recall - that was in similar state. sometimes I could get a read via the usb bridge, but no data. finally after days of trying I gradually was able to start reading - it would spin very slowly and erratically, taking literally days to complete the forensic tool's scan....
Computer on my work bench that I use to look up answers on google and download drivers or other software for customers computers that im fixing. I also have an IDE and SATA to USb adaptor to hook up a hard drive to the computer. I use this to run disk checks on the drive or to backup data. This computer has Win XP for years, but it started having more and more random issues so I decided to wipe it and install win 7. ever since doing this I'm running into a problem form time to time.
I searched the forum and had seen a similar thread , but lost track of it and so i decided to post a new thread.My problem is this-My Laptop hard disk of 500gb shows missing in the Local Disk Management & the status indicates FAILED.It so happened that by mistake I formatted a drive (H: ) using a program WintoFlash. & the problem was i had ran the program from the H: drive itself. So i ended up formatting the H:half way & the laptop restarted. Since then it didnt load the OS.I finally decided to remove the hard disk from the laptop & hook it to a spare computer which i already have . (500gb & Windows 7 installed)I checked My Computer & the drives didnt show up. So i checked the Local Disk Management & found a cross mark on my hard disk. & it showed missing. & status as Failed.his is how it looks:Shot at 2012-09-19Is there anyway i can get my data back?
Though there is 200 GB space available in my C drive I cannot create a disk partition using disk management , i am getting the available shrink space to be zero when I click the shrink volume.. but I do have free space..My system is Dell Vostro 1440.. How should I make the partition now?
Windows Disk Management utility has provided Extend / Shrink volume support.I got to knowthat FSCTL_SHRINK_VOLUME ioctl is provided for supporting shrink volume feature.I am interested to know what support is provided by File system driver and otherstorage modules to achieve shrink volume feature.Actually Linux does not have support for online shrink volume. So interested to know what are the support provided by Windows storage stack.
I had Windows 7 Prof. 32 Bit version installed on C. I had two more volumes D and E.So i needed one more volume therefore i shrinked the D and took 16 GB from it and made it new volume as NTFS formatted drive M. When doing it windows showed some warning that "you wont be able to boot except from your current installation" I cant remember exactly.After that the colour changed from blue to geenish yellow.When i restarted the windows logo started and the system crashes and BSOD with STOP Error : 0x0000007b (0x80786B58, 0xC000034, 0X0000000, 0X0000000)I ran diskpart Here are the results:My all 4 partition had become dynamic and i think this is the reason that windows wont boot.
There was originally just one HDD and I wanted all my "Media" to be in one partition and then Programme Files etc. in another (being C). This was just so that I could copy the entire 'Drive' I had created making moving videos and photos around easier.So I used the built in disk partition manager and created some unallocated space, then called that space Drive (A) - But now that (A) drive is full and I want to add an additional 40Gb to it from the original C, but I the "Extend Volume" option is greyed out on the (A) drive even with the 40Gb as Unallocated.
I'm running Windows 7 Ultimate 64 bit.Windows detects my external HDD but doesn't show up in My Computer. Drive is detected in Disk Management, indicated as "not initialized". When I try to initialize the drive, it gives me the following error,"The request could not be performed because of an I/O device error".What I've tried doing:Do a clean instll of windows - Don't work Uninstall external HDD driver, turned off power, turn it back on again, reinstalled driver - don't work Tested the same external HDD on another Windows 7 system - No problems, detected and able to access Tried plugging on different ports - Don't work.
