I used Shrink Volume option in disk management and then create new volume of the un-partition volume,after that desktop restart and windows corrupt,I am installing windows 7 professional,after license agreement the 0xE0000100 error coming,i have tried to install XP also but could not install.
View 2 RepliesI want to shrink my C drive. The volume shrink in disk management. It says that it is corrupt run chkdsk (something like that) SO I run the error checking and restart. Then it says error can fix error (some long thing with a billion numbers. Then it says run system recovery from control panel to back date the c drive to a before hand restore. So I go through that but right at then end the last button to push it says error on c drive first run error checking.
View 3 Replies View RelatedWindows Disk Management utility has provided Extend / Shrink volume support.I got to knowthat FSCTL_SHRINK_VOLUME ioctl is provided for supporting shrink volume feature.I am interested to know what support is provided by File system driver and otherstorage modules to achieve shrink volume feature.Actually Linux does not have support for online shrink volume. So interested to know what are the support provided by Windows storage stack.
View 2 Replies View RelatedWhen I select unallocated space in disk management All I get is "New Simple Volume" option. How do I create an extended partition and then logicals on it? I can do this ever so easily in gparted and may resort to that but a bit infuriated at how clunky this seems in disk management.
View 1 Replies View RelatedAlthough there isn't an interface specficially designed for it, you can actually view the progress of a volume shrink operation in Windows 7, and cancel a shrink that is in-progress, using the Disk Defragmenter tool.Volume shrink can take a long time, especially if you have a very full, or fragmented hard drive. Being able to view the shrink progress can be pretty handy!
View 1 Replies View Relatedwhy does shrink volume only display 350gb available to shrink out of a total of 703 gb on (C drive? the Hewlett Packard is fresh out of the box. it was partitioned with 200MB system files, the 703GB partition contains 25GB of files, 150MB partition unallocated. a (D drive HP created for emergency (nice feature). any suggestions on what to do with 150MB since it is so small (mb). windows 7.
View 8 Replies View RelatedI'm trying to create a new simple volume in 130 GB free disk space. There's no obvious reason why it would refuse to do so - I'm not at the hard limit on number of partitions or anything - but disk management MSC is consistently returning "Not enough space" errors. The only thing I can think of is something to do with the partition order, but if so I have no idea how to fix it non-destructively. I'm in the middle of backups on it, so deleting partitions is a no-go. At the moment I don't understand what's going on.
DISKPART output (Win 7 x64):
Code: DISKPART> list disk
Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 232 GB 134 GB
[code].....
i haved shrinked my hard and the disks are now dynamic and with green border in the top
View 1 Replies View RelatedI deleted all shadow copies, first via Disk Cleanup and then via vssadmin, all per your instructions. It didn't help. I then went in and disabled System protection. It didn't help either.Disk manager still says I only have 462756 MB shrink space out of a total of 953867 MB (NTFS), leaving 491111 MB after shrinkage. That's not enough - I need to shrink the C volume to 96 GB, because I want to move to my empty RAID SSD (2 disks/mirror) with 107.13 GB (NTFS). I assume the reason I cannot use Seagate's disk utility to execute the move is that it cannot move from a larger partition to a smaller, but it hasn't actually told me that - it just doesn't follow instructions.)
View 1 Replies View RelatedMy os partition size is 222 GB. Free space in OS partition is 85 GB. I want to Move 80 GB free space of OS partition to second Partion(F:) to do this, I tried to Shrink the OS volume. But size of available space for shrinking is only 707 MB.But there is 85GB free space in my OS partion. why this occurs?
View 4 Replies View RelatedHow to Shrink a Partition or Volume in Windows 7 ?
View 0 Replies View Relatedi using win 7 pro..but i cannot start De-fragment..so i cant shrink volume hd because this 2 thing are related...so what must do??? my restore point not work
View 3 Replies View RelatedI just installed a fresh new copy of Windows 7 Professional 64 bit to my newly bought free dos computer yesterday. Later I installed my motherboard drivers, monitor drivers and optical disk drivers. I also installed CC cleaner.
Now I am trying to partition my 500GB Hardisk. The C: drive is around 465GB so I want to reduce C: to 150GB (OS+Programs/Software) and make another D: drive which will have the rest 315GB (Personal files + games).
The problem now is there is a limit in the shrink volume amount. And this limit i quite big. It only lets me reduce the C: drive to 243GB. Here is the Screenshot:
I tried disabling Shadows Copy, Paging File, Hibernation and System Restore but its still the same. I also tried defragging using the default windows defragger but nothing worked.
When I go to the normal shrink partition in my Windows 7, it won't allow me to do it. What do I need to do to get my pc to allow me to shrink the C; in order to allow large Drive partition/
View 4 Replies View RelatedStarted with a 500 gig hard drive, was able to shrink it to half. My goal is a partition size of 100 gb. The entire contents of drive is less than 50 gb. I did away with the page file so as not to cause a problem as a none move able file. No hyber.sys file either. So right now the size of the partition is about 238 gb, but when I try to shrink it further it tells me that it can only be shrank by 7 more megs.
View 3 Replies View RelatedI am am running Windows 7 64, and my C drive was 150GB, and the other drive was 450GB. I decided to extend or expand it by deleting one of the volumes. However, I have come across a speed bump while doing this. After deleting my unused partition which was 450GB, and right clicked on the C drive to extend, but the extend option is greyed out. The shrink volume seems to be clickable though.
View 5 Replies View RelatedIts a bit complicated to state my situation, anyways, I have 2 HDD, and the PC won't boot if I removed the old HDD even though I've formatted the old HDD and win7 is on the new HDD.I have 2 physical HDD in PC
(1) 80GB old hdd and noisy. (not SATA)
(2) 500GB SATA hdd and sexy.
My powersupply only supports 1 SATA connection, and I don't have a DVD-Rom.I've unpluged the (2) and replaced it with my dad's SATA DVD-Rom to clean install Win7 64bit on the old (1), after I've finished, I removed the SATA DVD-Rom, I plugged back the (2), installed Win7 64bit ISO again from the (1) on (2), then I organized everything and split the (2) to E: and F:.
Everything's fine until I wanted to remove the old noisy hdd. When I did that, the PC started to bitch on me and didn't want to boot from (2).I've tried to rename (2)'s letter to C:, but it gave me 'invalid parameter' error. I doubt that it'll work by itself since it'll need to rename all the softwares' locations and stuff.so I went through another way, renaming (1) to a random letter like K: and wishing that'll work, I've restarted, shutdown'ed, and unplugged (1), didn't boot from (2).So it left me with only and only solution is by clean install, -but- I can't do it since I don't have an old dvd-rom nor do I have 2 SATA PSU cables... so I go back to the begging and...know that I have only 1 option by installing the win, is by the iso.
Now, what I'm thinking is that there's a possible way(maybe?) that I can replace Disk 0 box by Disk 1 box.Here's a picture to clarify it.So that's it, notice the 2 boxes down there? I'd like to switch Disk 0 by Disk 1 and then remove the old crappy 80gb hdd.
After adding two new SATA hard drives in my computer, I noticed that Disk Management lists SATA Drive C (which contains Win 7) as Disk 2. The other two drives are listed as Disk 0 and Disk 1.Since I connected SATA Drive C in SATA port 1, I was expecting to see it listed as Disk 0. SATA drives D and E are connected to SATA port 2 and 3 but are listed before the one connected in SATA port 1. And since the computer seems to work fine, I'm wondering if the disk numbers listed in Disk Management matter at all?
View 9 Replies View Relatedi am having 2 drivers in my system window 7 o.s. but after installing of another o.s i.e linux mint 12 i lost my main data driver partition. but dat lost driver is present in disk management, but it not able to perform any operation over that , it is having 2 enable operation i.e delete volume and help and i dont't have to delete that volume.
View 1 Replies View RelatedI have a Realtek built-in sound card. I've got a GA-990FXA-UD3 GIGABYTE mobo, and that's all I'd think matters.It was working a little while ago (Yesterday) with no problems.When I got home, the little speaker thingy on the bottom right had an error thing next to it.So, I looked in the volume settings to check stuff out, and but when I click "OK," it goes back to the lonely, empty, no speaker'd room.
View 7 Replies View RelatedI had a problem with Win7 not starting and the local shop I bought my computer from performed a Win7 reinstallation. I've just noticed a change in Disk Managagment which I'd appreciate clarification on. I'm running Win 7 Home Premium (64-bit)/TWO hard drives each 500Gb/8Gb of RAM, I also have TWO DVD-Rewriters.
View 2 Replies View RelatedI've just ran into what appears to be a bug with Disk Management under Windows 7. THe problem seems to go back all the way to OS reporting themselves as NT 5.2 or greater. XP x64 has the problem, Win2K3 server does and Windows 7 does. I don't have any version of Vista to check, so I don't know for sure but I'd bet its there as well. THe 32-bit version of XP which reports itself as NT 5.1 doesn't have the problem.
At any rate, the problem is Disk Management seems to count all Linux partitions as primary, even those which are logical volumes inside extended partitions on MBR drives. As such, if this erroneous count exceeds 4, it will refuse to create any more primary partitions, even though there are less than 4 actual partitions in the MBR table.
who dual boot with Linux could confirm this behavior. I've reported it on some of the MS forums, but no one seems to be interested.
In the Disk Management, I have an extra 0 MB GPT Protective Partition. Is that normal?
View 4 Replies View RelatedI have a disk which is partitioned into 3 = 1 is just the mft files no drive allocated, c: is my operating system and d: was the operating system. I need to change C: to boot now rather than my d:. When i start up, I have to press f1 to get started and 2 win 7 shows up. I have to move the arrow down to select the second to boot up, how do I change it,
View 19 Replies View RelatedMy data hard drive is seen in disk management but does not show in windows explorer.I am using windows seven 64 bits.In disk management the drive shows: Layout: simple, type: basic, file system: NTFS, status: healthy(system-active-primary partition) How can I retrieve my data?
View 8 Replies View RelatedI have a Dell Studio XPS 9100 computer with Windows 7 Prof installed. The computer has two physical hard drives that came with the computer. The seccond physical hard drive was not partition or formatted when I received the computer. I divided the second physical HD into three partitions, Page File (D), Image Backup (E), and Data Backup (F). The first physical HD had the following volumes when it came from Dell: OEM partition (39 mb), Recovery partition (10.8 gb), and OS (C) (71 gb)When using Disk Management, normally I would see the HD designation of Disk 0 for the OEM partition, Recovery partition and OS (C) partitions This morning after booting up the computer and looking at Disk Management, I am now seeing the volumes for Disk 0, Page File (D), Image Backup (E), and Data Backup (F). For Disk 1, I am now seeing OEM partition, Recovery partition, and OS (C) partitions.Is it possible for physcial hard drive designations to change and still have the computer operate normally?
View 6 Replies View Relatedi bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
View 7 Replies View RelatedI needed to copy files between two PCs and didn't have a USB big enough so I took the HDD out of my Dell Vista laptop and used it as an external drive to transfer the files I needed moving. When I connected it up to the destination PC running windows 7, the drive couldn't be seen in explorer. I had to bring the drive online in Disk Management in order to be able to explore the drive and take the files I needed off of it. All was OK until I put the drive back in the Vista laptop and then found that the drive wouldn't boot. All I get is a blinking cursor after the initial Dell logo screen. like as if the BIOS can't load the drive or something.Can someone please tell me what bringing a drive online in Disk Management does to the MBR of that drive?
View 5 Replies View RelatedSo I am here because I am having some hard drive problems. Firstly for my Primary drive i am still running my old 250gb Hard drive (with windows already installed on this drive). Secondly, for my slave drive i have a Samsung Spinpoint 1TB Hard drive that wont display in my bios or in disk management. The 1TB drive seems to spin up fine etc. but i just can get it to display. i can format this new disk. Also i must add that my motherboard is an ASUS p8z68-v-pro board.
View 9 Replies View RelatedI've worked on many before and as you know most of the time you can force a drive to spinup and cough up at least sOME data.... every now and then I get a harder case.
dealing with this caused a question in my mind:
I have the bad drive [PATA notebook drive -seagate momentus] attached to a usb bridge device that I use for all such issues. in this case, when I do a fresh start, with the external bridge powered up before cold boot, once 7 Ultimate gets coherent I run disk Management - the scan will popup the box saying "this disk needs to be initialized" and I give it the go - it gives "device not ready".that does not surprise me since the drive seems to only spin [motor runs] sporadically.
What I'd like to know is: what is the applet "seeing" - what is it in disk management that recognizes there is something akin to a Disk out there on one of the device ports?the followon question would then be: what low-level tool can I use that can attempt communication with the drive's firmware to try to get a spinup command or something to give me a chance???
I have seen an old macintosh drive - WD if I recall - that was in similar state. sometimes I could get a read via the usb bridge, but no data. finally after days of trying I gradually was able to start reading - it would spin very slowly and erratically, taking literally days to complete the forensic tool's scan....
Windows 7 my computer shows disks my two partitions device manager and disk management do not show my hard drive
View 3 Replies View Related