I just installed a fresh new copy of Windows 7 Professional 64 bit to my newly bought free dos computer yesterday. Later I installed my motherboard drivers, monitor drivers and optical disk drivers. I also installed CC cleaner.
Now I am trying to partition my 500GB Hardisk. The C: drive is around 465GB so I want to reduce C: to 150GB (OS+Programs/Software) and make another D: drive which will have the rest 315GB (Personal files + games).
The problem now is there is a limit in the shrink volume amount. And this limit i quite big. It only lets me reduce the C: drive to 243GB. Here is the Screenshot:
I tried disabling Shadows Copy, Paging File, Hibernation and System Restore but its still the same. I also tried defragging using the default windows defragger but nothing worked.
Although there isn't an interface specficially designed for it, you can actually view the progress of a volume shrink operation in Windows 7, and cancel a shrink that is in-progress, using the Disk Defragmenter tool.Volume shrink can take a long time, especially if you have a very full, or fragmented hard drive. Being able to view the shrink progress can be pretty handy!
why does shrink volume only display 350gb available to shrink out of a total of 703 gb on (C drive? the Hewlett Packard is fresh out of the box. it was partitioned with 200MB system files, the 703GB partition contains 25GB of files, 150MB partition unallocated. a (D drive HP created for emergency (nice feature). any suggestions on what to do with 150MB since it is so small (mb). windows 7.
I like to listen to music loudly sometimes. I have both the volume mixer and my application's volume set to maximum levels, but it's not loud enough for my liking. Is there any way to increase the maximum sound volume in Windows 7?
When I go to the normal shrink partition in my Windows 7, it won't allow me to do it. What do I need to do to get my pc to allow me to shrink the C; in order to allow large Drive partition/
Started with a 500 gig hard drive, was able to shrink it to half. My goal is a partition size of 100 gb. The entire contents of drive is less than 50 gb. I did away with the page file so as not to cause a problem as a none move able file. No hyber.sys file either. So right now the size of the partition is about 238 gb, but when I try to shrink it further it tells me that it can only be shrank by 7 more megs.
Windows Disk Management utility has provided Extend / Shrink volume support.I got to knowthat FSCTL_SHRINK_VOLUME ioctl is provided for supporting shrink volume feature.I am interested to know what support is provided by File system driver and otherstorage modules to achieve shrink volume feature.Actually Linux does not have support for online shrink volume. So interested to know what are the support provided by Windows storage stack.
I deleted all shadow copies, first via Disk Cleanup and then via vssadmin, all per your instructions. It didn't help. I then went in and disabled System protection. It didn't help either.Disk manager still says I only have 462756 MB shrink space out of a total of 953867 MB (NTFS), leaving 491111 MB after shrinkage. That's not enough - I need to shrink the C volume to 96 GB, because I want to move to my empty RAID SSD (2 disks/mirror) with 107.13 GB (NTFS). I assume the reason I cannot use Seagate's disk utility to execute the move is that it cannot move from a larger partition to a smaller, but it hasn't actually told me that - it just doesn't follow instructions.)
My os partition size is 222 GB. Free space in OS partition is 85 GB. I want to Move 80 GB free space of OS partition to second Partion(F:) to do this, I tried to Shrink the OS volume. But size of available space for shrinking is only 707 MB.But there is 85GB free space in my OS partion. why this occurs?
I want to shrink my C drive. The volume shrink in disk management. It says that it is corrupt run chkdsk (something like that) SO I run the error checking and restart. Then it says error can fix error (some long thing with a billion numbers. Then it says run system recovery from control panel to back date the c drive to a before hand restore. So I go through that but right at then end the last button to push it says error on c drive first run error checking.
i using win 7 pro..but i cannot start De-fragment..so i cant shrink volume hd because this 2 thing are related...so what must do??? my restore point not work
I used Shrink Volume option in disk management and then create new volume of the un-partition volume,after that desktop restart and windows corrupt,I am installing windows 7 professional,after license agreement the 0xE0000100 error coming,i have tried to install XP also but could not install.
I bought a USB A4 Tech HU-200 HeadPhone Its volume is quite high even when the windows volume is at 0, When its at max 100 it works like dedicated speakers Is there any way to reduce the volume beyond the lowest volume of windows 7?
Note: My Headphone does not have any soft of driver or software
I have been using DVD Shrink 3.2 with Win XP for years to make backups and archive my valuable DVDs. I now have a new computer running Win 7 and DVD Shrink no longer seems to load properly or work correctly. I still need to be able to back up my own DVDs-what programs are available in Win 7 to do that?. I have just begun using the new computer and have not begun to exoplore all the features of Win 7
so i have a blue yeti, and i'm an online animator/voice actor. whenever i record audio on my blue yeti (or any other mic) i record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as i yell or whatever. this is what you're supposed to do if you don't want your audio levels peaking and making your recording sound horrible and corrupted. however, afterwards, it means i have really quite recordings. not a problem right? now that it's recorded right, i can boost the volume of the entire clip afterwards right? wrong. i'm not an audio expert so i must be missing something. but why in gods name would the audio distort and peak after it's recorded successfully? it's all there, it's all clean audio. if i turn the volume on my speakers all the way up it sounds crystal clear! all i want to do is do that inside the computer so that when i upload it to Internet people don't have to turn their speakers so far up. but if i increase the clips volume in the computer, it distorts! it sounds awful! why?! i tried in sony acid and audacity and they both do the same thing! i can take sound effects, and recordings made by other producers and crank them up nice and loud, but mine just fall apart!
I've been trying for the past two days to re-install windows 7. It would work fine if I had more disk space available which is my problem. I have 74.5GB's available on my laptop, but unable to get more than 3GB clear at a time, and I need about 7GB's to reinstall my windows 7.When I try to shrink the partition, it tells me to run a chkdsk. I've ran chkdsk several times but it always stops at 9% and gives me an error.
I have just run PartedMagic on a new Windows 7 system to shrink C: in order to be able to create an E: (Data) partition. On rebooting, I get the following error message: Windows failed to start.
A recent hardware or software change might be the cause.
To fix the problem: 1. Insert your windows installation disk and restart your computer. 2. Choose your language settings, and click "Next." 3. Click "Repair your computer."
If you do not have this disk, contact your system administrator or computer manufacturer for assistance.
File: Windowssystem32winload.exe Status: 0xc0000225 Info: The selected entry could not be loaded because the application is missing or corrupt.
As it is a new machine, it was supplied with no system disk and I don't have a Windows 7 Installation Disk to hand. I guess that either the boot sector has been corrupted, the partition table has been corrupted or most likely that the system partition has been moved slightly.
Incidentally, the system is an Acer Aspire 5742 According to PartedMagic, the partitions are now allocated as follows:
I've set up a homegroup specifically to stream Bluray movies to my mum's computer, but my sister wants in on the action and connects to my computer to watch my collection of movies even when I tell her not to. I wouldn't mind but this consumes quite alot of bandwidth. Are there any ways to limit my sharing to just my mum? Or to kick and/or ban my sister's computer from my homegroup?
I just received a new keyboard today: Thermaltake Challenger Ultimate. I went from a Logitech G15.
First thing I did was connect the keyboard and install the software that came along on the CD, it probably also installed the correct drivers. First after this did I uninstall the software and drivers from the old Logitech G15. But before that, and now after, the volume buttons on my new keyboard is still not adjusting the volume when I press them.
A speaker-icon like this shows up when I press the volume buttons, so its not that the keys are not working: (ignore the text behind it, its me writing an assignment)
I recently got this problem, that my volume hotkeys stopped working, (Acer Aspire 5560G) AMD High Definition Audio. I also tryed plug in other keyboard that have's volume hotkeys but still doesn't work.
I'm running wampserver on a windows 7 machine. My problem is that when I try to download from the site my max download speed i 300kb/s. I used to run the server on windows xp and there was never any problems with bandwidth limit. So I moved back to the xp machine and the problem was gone. So is there a way to remove the bandwidth limit in windows 7?
I wonder if there is any way I can limit my windows 7 home premium to some programs. I use my pc as a music studio computer and know very well what software I use ant what I dont care about, is there any way I can limit windows to that software, which I pick out? My aim is to optimise windows to highest performance in studio computing.
