Immediately Backup Data And Replace Hard Disk Drive
Jul 25, 2012
I have a Acer Laptop with windows 7 premium 64bit installed on it. Recently, when I start the laptop, it shows the error message: Smart Failure Predicted on Hard Disk 0: WD5000BEVT-22A0RT0-(S1)
Warning: Immediately back-up your data and replace your hard disk drive. Press F1 to continue.
After pressing F1, windows failed to boot and it stuck at black screen there. I decided to format the laptop.ok,this time my windows booted smoothly. But the problem is,the same warning came out once I start the laptop. After pressing F1, every thing works fine. This laptop is still under warranty period.
When I turn on my laptop it says: "SMART Failure Predicted on Hard Disk 0: TOSHIBA MK3017GAS-(PM). WARNING: Immediately back-up your data and replace your hard disk drive. A failure may be imminent. Press F1 to Continue". And then when I push F1 it just have a blank screen.
How I could partition my internal hdd without wiping all data from it, and then sharing the partitioned drive within my home network. Also, I was wondering how I could tell what drive letters are already assigned to my laptop's usb ports.
So let me explain my situation. I have a 15 month old laptop, with a dying hard drive. Quite frequently when it spins up, the hard drive makes a horrible buzzing/scraping noise. I decided I will invest the money and replace it for the $100 and get a faster one (7200 rpm).
Here's the catch. I have an upgrade disk on order, and only an OEM backup disk (Vista) to reformat.
Whats the best way to replace the hard disk and use an upgrade media to use 7 on my computer?
I manage a large array of disks and rely on Robocopy via batch files to backup only changed data. This has served me well for a year or so now. However, last week I had a drive go flakey. For some reason all of the folders on the drive beginning with letters K through Z got trashed. Since no one realized this the backup script ran on schedule and promptly deleted all folders on my backup drive beginning with letters K through Z.
I've used a couple of backup programs in the past and I'm fairly sure this issue is not adressed.
drives partially failed and deleted all folders beginning with letters K through Z. When my backup script ran it deleted all of the same folders on the backup drive. I received a reply from a user (don't have access to the name right now) who suggested a freeware sync package which most likely would work. However, company policy states that no freeware is to be run on our systems. While I could probably get away with it a question comes to mind - Why isn't this a standard feature in commercially available backup software. There must be a name for this type of option. Does anyone know of a commercially available package and / or what this feature might be called? I can't be the only person who has run into this problem.
I want to upgrade to a bigger hard drive on my laptop but also want to upgrade to Windows 7 (from XP). How do I install the new hard drive, install the new OS, but sill get all my data and software fdrom my old hard drive onto the new one with the new OS?
new hard drive? I want to replace my slow green drive with a wd 7200 rpm black driveBefore I install windows 8. Can I use windows 7 drive image program to do this?
OS: Dual-boot Windows XP Professional x32, Windows 7 Ultimate x64. (Windows XP earlier OS)CPU: AMD Athlon 7750 x2RAM: 4GBGPU: Nvidia GeForce 9500gtHDD: Seagate 500GB. For the last two days whenever I am starting my PC, just after the MB logo, I am shown a black screen where at the bottom it is written 4th Master Hard Disk S.M.A.R.T. Status BAD. On searching the net, I found that it indicates my HDD is dying. I am going to buy a new one. How do I transfer the data from the old one to the new HDD? I am not concerned about installed programs, only things like data files, images, songs and such things
Got a new PC (Windows 7 Home Premium 64bit) with a 1TB drive. I added an extra internal drive which happens to be one of my old 300GB XP drives (231GB free). There are some apps on the old drive (Photoshop 6.0) which still run & I'd like to use them. Can I run Windows Backup and create an image on the old drive even though there are 70GB's of apps & files on there already?? Does the backup wizard partition or format the selected drive in the process of backing up? Obviously I'd like to keep accessing that stuff if I can.
I Had format hd and during that i made resize for the active partition; after that i found that thier was Data i lose it (was on the old Desktop of Win7). How i can return back that DATA?
I have a 2TB hard drive which i have partitioned into 3 partitions, (249GB for C:, 1000GB for D: data, 613GB for E: data). Now the 1000GB partition which is filled with data has disappeared from My computer. It happened after installing a dual boot with linux and using the 613GB as unallocated space for the linux partitions, (I have since removed the linux and partitions on the E: 613GB and created a ntfs primary partition again).
I have uploaded a screenshot that you can see that partition is not in my computer and in Disk management it only shows by "Disk 0" and not under volumes. I have tried using 'Diskpart' To assign a drive letter but under 'list volume' nothing appears. I have also done a a partition details which shows no volume, dont know if I am able to merge the partition in anyway or if the partition table that needs to be fixed
What software or way to format the hard drive data, making it safe to delete data no recovery possible. Such as DBAN, but erased too long. I tested a 160G hard disk data erase, with six hours or so
My System was working fine yesterday.I turned it off and came back today and tried turning it on.It took the System to Automatic Repair and got stuck there
- When ii restarted it. it said "Select a proper Boot Device"
- I Booted into BIOS and it stopped getting Detected
- I reseated the HDD and it was getting detected again
- I took it out and connected a friends system and checked
- It took a while to Start his OS.
- Then In Computer Management my hdd being shown as "931.2Gb Unallocated"
- How to get it Back..
- I have 6+ years photographs on it.
- But not aware which option should i use so i can recover my data back.
I have a folder that I'd like to periodically mirror to an external hard disk. How can I easily copy the source to the target, deleting files now deleted in the source, updating files that have been changed in the source, and adding new files to the destination. Would an XCOPY with the appropriate set of switches do the trick - maybe something like
I have a 500 GB SimpleTech hard drive (outboard) that I recently discovered to be full. Upon exploring its contents, I discovered many backup files and have no idea how/why they were created. I deleted several of the older files to make room for files I wished to store, and then explored further. On the hard drive, I find one folder named HPLAPTOP01 and another named WindowsImageBackup, between them holding many GB worth of files with names: Backup Set yyyy-mm-dd xxxxxx. Is Win 7 creating these backups, or is the SimpleTech drive doing it?
I do this quite often and I am very annoyed. Everytime I connect a hard drive [xp, vista, or windows 7] and try to access it I get the message that I don't have the right to view it. I have to use the "take ownership" feature. I am an administrator so what gives.running windows 7 professional with microsoft security essentials and windows firewall?
installed a 60GB SSD a couple of years ago when they were quite expensive. I planned to use it solely for the operating system (Windows 7 Ultimate x 64). However over the years, it has become full to overflowing. I would like to clean it up and return it to the operating system only. Unfortunately I do not have the original disks or access to the installation programs for most of the information on the SSD. I have two other hard drives in the system - a 500GB Velociraptor that I originally wanted to hold all the programs and a 1000GB for the data. Can anyone tell me the best way to transfer the data off the SSD without screwing up my system?
At present I use Vista and will be upgrading to Windows 7 o/a 22 Oct.
My total C & D drives use 110 GB so I would like to puchase something in that area and it would only be used for emergency backup. I have looked at several but I noticed that all of them only function with XP & Vista and no mention of Windows 7.
I would appreciate a recommendation that will function with Windows 7.
Its a bit complicated to state my situation, anyways, I have 2 HDD, and the PC won't boot if I removed the old HDD even though I've formatted the old HDD and win7 is on the new HDD.I have 2 physical HDD in PC
(1) 80GB old hdd and noisy. (not SATA) (2) 500GB SATA hdd and sexy.
My powersupply only supports 1 SATA connection, and I don't have a DVD-Rom.I've unpluged the (2) and replaced it with my dad's SATA DVD-Rom to clean install Win7 64bit on the old (1), after I've finished, I removed the SATA DVD-Rom, I plugged back the (2), installed Win7 64bit ISO again from the (1) on (2), then I organized everything and split the (2) to E: and F:.
Everything's fine until I wanted to remove the old noisy hdd. When I did that, the PC started to bitch on me and didn't want to boot from (2).I've tried to rename (2)'s letter to C:, but it gave me 'invalid parameter' error. I doubt that it'll work by itself since it'll need to rename all the softwares' locations and stuff.so I went through another way, renaming (1) to a random letter like K: and wishing that'll work, I've restarted, shutdown'ed, and unplugged (1), didn't boot from (2).So it left me with only and only solution is by clean install, -but- I can't do it since I don't have an old dvd-rom nor do I have 2 SATA PSU cables... so I go back to the begging and...know that I have only 1 option by installing the win, is by the iso.
Now, what I'm thinking is that there's a possible way(maybe?) that I can replace Disk 0 box by Disk 1 box.Here's a picture to clarify it.So that's it, notice the 2 boxes down there? I'd like to switch Disk 0 by Disk 1 and then remove the old crappy 80gb hdd.
I've had this laptop for a few months now and I got another hard drive called Data which is empty, my other hard drive called OS is where everything goes and I wondered if I can move games and other files to my Data hard drive without corrupting them. And if possible can I move a file called Program Files to my Data hard drive without causing any problems. My pc takes a long time to restart which I guess my OS decides. My OS got is 80gb of 238GB and my Data is 332gb big, with no files in it.
I have a newer computer (HP Pavilion Slimline) with Windows 7 and 64bit system. My old hard drive is out of a dead (won't power up) HP Pavilion Slimline Vista 32bit. I pulled the old drive and connected it through a harness and the USB on the new computer. When I open the devices and printers program the old drive is there but when I open the icon all I get is the properties etc. but no way to access any data on the old drive. Do I need a program or is the drive dead? It powers and runs and when it is connected and I open the properties I'm told the old drive is working properly.
My relatively new Dell desktop power supply died so trying to retrieve my data (pictures and docs) off the internal hard drive. Hooked it up with an adapter I have used in the past which seems to work fine and I can see the drive when I look on windows explorer on my laptop. The only problem is the Windows 7 operating system is preventing me from access the data stating I don�t have security access or right to copy the data.
I've been using Windows 7 pro 64bit for a while. My issue is that I want to put in a new hard drive and install windows 7 on that without loosing or moving all my data onto my new hard drive. Can someone tell me what is the most painless way to go abouts doing this?
I had a message about errors when I plugged in my WD external hard drive. I let the Error Checking run and when it finished it said I needed to format the disk. I cancelled this and looked in my computer and although the drive appeared, no details (i.e. space usage) was present.
I re-ran Error Checking with "Scan for and attempt recovery of bad sectors" checked. After running this the drive appeared properly in My Computer.
However there are many files missing, and the space usage of what is there doesn't match up with what my computer says.
Files I can physically see: ~ 120 Gb. Space usage according to Explorer: ~420 Gb. So it looks like tha data may still be there but Windows can't see it? Edit: BTW, forgot to say, all this is booted into Windows 7 not XP on my dual boot system.