I Had format hd and during that i made resize for the active partition; after that i found that thier was Data i lose it (was on the old Desktop of Win7). How i can return back that DATA?
View 2 RepliesEvery time i plug my external storage device to my computer, i am asked to "you need to format the disk in drive F: Before you can use it. Do you want to format it?" I checked my drive and its File system is RAW. I don't want format it because all my important data are in it.
View 2 Replies View Relatedwhile converting dynamic to basic we need any external hard disk for backuping or by software we can do it????
View 4 Replies View RelatedI have an HP s5-1200z computer with Windows 7 Home Premium 64 Bit. I have been reading and trying different things for the last three days trying to upgrade my hard drive. The computer came with a 500GB and I want to use my 1TB instead. The first thing that I did was create a system image and a system repair disc. I then restarted my computer and booted from the system repair disc. I selected my keyboard setup and then received an error stating �This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows�I can not figure out why I am getting this error message. Many post say that it is because 32 bit vs 64 bit. My computer is 64 bit and the repair disc that I made is 64 bit as well. With no luck on upgrading my hdd I decided to take a different approach. I then cloned my 500GB to my 1TB using Easeus Partition Master Home Edition. Everything seems to be on the 1TB HDD it stated it was successful. I then removed the source hdd and installed the 1TB destination hdd, I turned the computer on and received an error "bootmgr is missing press ctrl+alt+delete to reboot." I also spent many more hours researching this problem, I can not find a solution. Many articles say boot from system repair disc and click repair your computer" when I try to do that I still continue to receive the error "This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows"I have read that having more than one hdd connected at once can cause boot errors. But I do not believe this is the case because my computer can only hold one hdd.I also downloaded the Windows Home Premium x64 from mydigitallife to try and repair my pc from there only to receive the same error.
View 5 Replies View Relatedwhen i trying to connect my harddrive it will show format hard drive but how i get my data back without format?
View 1 Replies View RelatedSomething on my hard drive is eating up the space even though I un-install applications and then it shows lots of space, but in a few moments that space is gone.
I have run Malwarebytes and deleted a lot of my files that is suspected of Virus/Spyware, yet the same thing happens repeatedly.
What software can I use to ensure I get rid of this 'thing' that is eating away or growing on my hard disk?
i have 500gb external hard disk n 3 partition in it.. now al 3 disks am not able to open . tried formatting but it gives error msg saying i cant format the disk..tried using command prompt as well but no use .so how can i format the diskd now?
View 1 Replies View RelatedI bought new hp laptop.. it came with 500 GB harddisk, windows 7 home basic, I didn't get any windows cd apart from recovery in hard disk. My windows is installed in c: and that is the only drive that it have... now the situation..
1) I want to partition my harddisk without losing windows means I don't want to format C: drive
2) I also want to install linux in dual mode with windows..
Second question is related to first one because I don't need any method that may lead to situation like I can't install any other operating system.
I had installed ubuntu 10.10 on my lap Dell N5010 model recently, After few days i got blue screen error message then i decided to format my hard disk, with a windows 7 ultimate version which i got through internet. then i thought to format the system completely so while installing i went to advanced disk options and deleted all drives when i did this the drive which has name primary is detected after installation. the drivers which are under category of logical are not getting displayed in my computer and also in partition manager it is showing as unusable space.
View 1 Replies View RelatedOS: Dual-boot Windows XP Professional x32, Windows 7 Ultimate x64. (Windows XP earlier OS)CPU: AMD Athlon 7750 x2RAM: 4GBGPU: Nvidia GeForce 9500gtHDD: Seagate 500GB. For the last two days whenever I am starting my PC, just after the MB logo, I am shown a black screen where at the bottom it is written 4th Master Hard Disk S.M.A.R.T. Status BAD. On searching the net, I found that it indicates my HDD is dying. I am going to buy a new one. How do I transfer the data from the old one to the new HDD? I am not concerned about installed programs, only things like data files, images, songs and such things
View 9 Replies View RelatedHow I could partition my internal hdd without wiping all data from it, and then sharing the partitioned drive within my home network. Also, I was wondering how I could tell what drive letters are already assigned to my laptop's usb ports.
View 2 Replies View RelatedI have a 2TB hard drive which i have partitioned into 3 partitions, (249GB for C:, 1000GB for D: data, 613GB for E: data). Now the 1000GB partition which is filled with data has disappeared from My computer. It happened after installing a dual boot with linux and using the 613GB as unallocated space for the linux partitions, (I have since removed the linux and partitions on the E: 613GB and created a ntfs primary partition again).
I have uploaded a screenshot that you can see that partition is not in my computer and in Disk management it only shows by "Disk 0" and not under volumes. I have tried using 'Diskpart' To assign a drive letter but under 'list volume' nothing appears. I have also done a a partition details which shows no volume, dont know if I am able to merge the partition in anyway or if the partition table that needs to be fixed
Attached Files:
Partitions.jpg 467.78K
1 downloads
What software or way to format the hard drive data, making it safe to delete data no recovery possible. Such as DBAN, but erased too long. I tested a 160G hard disk data erase, with six hours or so
View 5 Replies View RelatedMy System was working fine yesterday.I turned it off and came back today and tried turning it on.It took the System to Automatic Repair and got stuck there
- When ii restarted it. it said "Select a proper Boot Device"
- I Booted into BIOS and it stopped getting Detected
- I reseated the HDD and it was getting detected again
- I took it out and connected a friends system and checked
- It took a while to Start his OS.
- Then In Computer Management my hdd being shown as "931.2Gb Unallocated"
- How to get it Back..
- I have 6+ years photographs on it.
- But not aware which option should i use so i can recover my data back.
- It is a western Digital 1TB HDD
my external hard disk is readable by pc but its ask for format to it tell me what to do to save the data in it.
View 1 Replies View RelatedWhen I turn on my laptop it says:
"SMART Failure Predicted on Hard Disk 0: TOSHIBA MK3017GAS-(PM). WARNING: Immediately back-up your data and replace your hard disk drive. A failure may be imminent. Press F1 to Continue".
And then when I push F1 it just have a blank screen.
I have a Acer Laptop with windows 7 premium 64bit installed on it. Recently, when I start the laptop, it shows the error message: Smart Failure Predicted on Hard Disk 0: WD5000BEVT-22A0RT0-(S1)
Warning: Immediately back-up your data and replace your hard disk drive. Press F1 to continue.
After pressing F1, windows failed to boot and it stuck at black screen there. I decided to format the laptop.ok,this time my windows booted smoothly. But the problem is,the same warning came out once I start the laptop. After pressing F1, every thing works fine. This laptop is still under warranty period.
get data from hdd without formatting it?
View 2 Replies View RelatedCurrently I'm interested in upgrading to Windows 7 from Vista, unfortunately I've accumulated a collection of programs and media that I would not be interested in losing.
View 3 Replies View RelatedMy minister has an hp laptop that uses Vista and I have suggested that she should convert to System Seven. So my question is this, how can it be done without losing any data, preferably and can it be done and have it run effectively with no bugs.
View 7 Replies View RelatedWin7 64bit had separate partitions for data and os, after some bootup issues the windows partition is ok but data partitions show zero bytes - cannot lose valuable data!
View 1 Replies View RelatedI purchased an internal bay that supports 3 removable SATA hard drives. I had 2 hard drives (1-OS, 1-Data). When I installed the unit, one the first boot, I could see both drives.One the second boot, It had formed a RAID 0 to show it as one large drive. Reason for install was to have 2 different boot drives that would utilize the remaining drive as a data disc. Now when I try to decouple them, it says I will lose all data.
View 3 Replies View RelatedI have a Samsung QX410 with Windows 7, 64 bit. When i bought it, i had made a set of 4 recovery disks (i dont really know how they work, or what they do). A few days back my laptop slid and fell down, and since then i have had this trouble. My windows is not loading up.....it takes me to a black screen.
how i recover the windows using those CDs? And also if i use them, does that save my data on D drive or not? I dont really have any data that i want to save on my C drive. What other options do i have to save my data ?
I've 4 Partition created on my Hard Drive..!!1. System Usable Partition (Reserved for System by its own)2. Local Partition (In which Windows is Installed)3. Another Partition (for Storage purpose)4. One more Partition (for Storage purpose)So, when today I tried to shrink my one of the partition (except system usable & C Drive/Local Drive) the the Windows alerted me with the Message : "Your Operating System won't boot after changing the drive to Dynamic Drive" ....!!After this message appears I clicked yes..!!The partition is been made
View 10 Replies View Relatedafter shrinking my hard drive it has changed to dynamics and i cant even install windows on a different disk,what shuold i do?
View 2 Replies View RelatedI have a large 4000 x 25 Excel 2003 spreadsheet that keeps losing rows of data. I normally add 5-10 rows a day and over the last few weeks I have noticed that a couple of days data has disappeared every so often. The sheet is being closed cleanly and saved. Fortunately I have a daily backup so I have been able to go back. the data is there for two days after it was originally entered and then disappears. There has been no restore of the data and the rows have not been accidentally deleted.
View 3 Replies View RelatedIf password of the bit locker of windows 7 is lost and no recovery key is kept how to regain the drive without losing data???
View 2 Replies View RelatedSo currently I have Windows Xp and Windows 7 /32bit installed. Windows XP on C Drive and Windows 7 on D.I would like to install Windows 7 /64 bit over windows XP so I can use more than 4G Ram. So I would have both 32 and 64 bit windows on the same PC. I have few questions: Can I somehow upgrade from XP to 7 without losing data and files? Will I still be able to go on the Windows 7 /32Bit?
View 3 Replies View Relatedif a partition drive is formatted by mistake how the data can be restored...
View 2 Replies View RelatedPen - drive - needs formatting - how can i save or retrieve data - before formatting
View 2 Replies View RelatedLow disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View Related