My disk crashed and had to reload everything, I took it to Toshiba service center. Before the crush my hard disk was just one big physical disk now I have: C: physical 150.84 GB(boot, page file, crush dump, primary partition)If so can you please tell me how to do it, never done this before, partitioning, and I don't want to make a mess out of it.
View 8 Repliesmy pc operating system is installed in c drive which is 25 gb in size, and d drive is 50 gb.is it possible to shrink 5 gb space of d drive and add it to c drive?
View 6 Replies View RelatedI've got a 320GB drive on a Vista Premium Home notebook.
Few user files are actually on the notebook, rather the files are on my desktop, and are processed via the network, or temporarily copied to the notebook.
Currently, C drive is 285.04GB with 246GB free.
HP's recovery partition is 13.05GB, with 2.4GB free.
I am going to shrink the C drive, so I can add a separate partition for my own files, this partition could be shared with Windows 7.
How much space should I leave for Windows 7 Home?
I would end up with the following partitions:
C: For Vista
H: For Howard's files
W: For Windows 7 Home
Unallocated: Likely 32GB, in case I wish to add Ubuntu Linux.
D: Recovery partition for HP. I use image backup so this is not really useful.
I have two opreating system installed but in drive D win xp was not working therefore i tried to installed the win xp in drive D and i have already installed a win 7 in Drive C and i encrypt the drive E, F with Bitlocker ..when i install the win xp then win 7 was not reachable and not work correctly then i again installed the win 7 in drive C and want to partition the drive E,F then there was a problem created while in partitioning because i forgot the un encryption of these drives.
View 1 Replies View RelatedThere was a time when I had Windows 7 and absolutely adored it.
For certain reasons I tried to go back but fail epically (yes, I'm a teenager!) and now I have two active drive partitions and it's still looking for Windows Seven's bootmgr.w/eand now I need either one of four questions answers so I can get back on my new computer. [(BTW, I am starting to hate the way I need to tweak things.)]
The questions are:If I install windows seven on my usb flash drive (which I tweaked to make the computer look at it like a USBHDD,) will it wipe out the OS on my grandpa's computer? How can I make BIOS look-up and process boot.ini instead? How can I run the Windows Vista install off my FlashHD [as I call it. :P]Is it even possible? Would it work better or, once again, is it possible to install Vista on my flash drive and use it to run on my grandpa's computer. My computer is an Acer AspireOne [I will deservingly accept flaming due to my poorness and poor sense of choice].
I am looking to use my 1TB seagate SATA II drive for my Windows 7 installation, and was wondering how I should go about partitioning it and how large each partition should be or what I sould put on each partition.
My system will be used for the following:
Computer Games that take up a lot of space (World In Conflict, Empire Total War, Battlefield 2, Call of Duty, etc.)
Music
Video files/ recordings (I have a Hauppauge tv card)
Some Photos
Basic apps like office
Data files
Which of the above items should I put on the OS partition, and which should get their own partitions? How large should the OS partition be compared to the other partitions? Seperate partition for games?
Having one giant drive might be nice to try, but then I would have no where to put my excess video files if I ever needed to reformat. The 1TB drive accomodates whatever video files I can't store on my 2 smaller drives and currently has 120 GB of video on it.
In addition to my 1TB drive, I also have 2 more internal drives, a 250GB Maxtor ATA which is filled with video files and a 200GB WD SATA that I use for my TV card and storing the recordings I make until I have a chance to edit them or move them to a differet drive.
I have a seperate 250GB external drive for backing up data files and music, so the backup issue is taken care of.
How to partition my 250gb hard drive into 3 volumes on windows 7?
View 7 Replies View Relatedi have a question about partitioning a 2TB external hard drive that is formatted for 1.8 TB, i would like to partiotion it into (2) 500G partitions and whats ever is left as another partition, i dont remember how to go about doing it, if i think i remember correctly, i have to delete the partiotion first ( there is not data on it at the moment ) then partition the drive as stated above, i will be using partition home wizard 6.0, also, cant i just "resize the 1.8TB drive to what i want ?. or is it better to delete it and re partion the drive
View 1 Replies View RelatedI got a question for you maybe you can answer for me. I have a single 1terabyte sata drive with windows 7 on it. I used to have Windows xp pro on it but i upload Windows 7, i just delete the "old windows" that Windows 7 left me. Now i have accumulated alot of files in my documents file which i use for video purposes which take up about 530 gigs.
i can't wipe my hard drive clean to install the new update rc which i recieved as a beta tester. Is there any way to partition the drive only where Windows 7 is at leaving my 530 gigs in a seperate partition so that i can install dual os's. The two os's will be Windows 7 rc and Xp Pro. the only reason i made the switch is because i built my new computer with 4 gigs of memory running core 7 processor but xp only sees 3 gigs.
i bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
View 7 Replies View RelatedI have a 1tb HD and I want to partition it to install another operating system. There is no "unallocated space". How do I go about making my partition?
View 8 Replies View RelatedI have 4 physical hard drives, 2 of them are 150GB and 2 of them are 1000GB. Both are mirrored at the pre O/S level in order to provide redundancy. On the 150GB mirror I installed the host operating system (Win Server 2008 R2 with Hyper-V) and the 1000GB mirror is just a Data drive. I've created my Virtual server in Hyper-V and allocated it 500GB from the 1000GB mirror. When I start up the virtual Server in order to install the o/s I will be asked whether to partition this "Virtual hard drive" i.e., have a C: drive for the virtual o/s and a d: drive for the virtual data. Of course they would be on the same physical disk anyway so should I bother partitioning the Virtual 500GB drive.
View 1 Replies View RelatedI recently purchased a new motherboard. After reinstalling windows, I noticed that my primary partition is also on my Storage Drive. Is there a way to change it back to only the SSD?
View 2 Replies View RelatedI just partitioned my external 3.0Tb hard drive using the device manager in Win 7. At first I had one partition of around 2.8Tb, I shrunk the existing partition to around 1.9Tb and then Windows created 3 partitions instead of 2. I ended up with 1 partition of 1.9Tb, 1 partition unallocated of around 100Gb and a 3rd partition of 746Gb unallocated. I was then able to create a simple volume on the 100Gb partition which left me with the 746Gb partition unallocated. When I try to format the 746Gb partition all the options are greyed out - I cannot create a simple volume or delete the partition. I also cannot extend my other 2 partitions to use the unallocated space. When I delete the 100Gb partition I can then extend the 1.9Tb partition and end up with a 2Tb partition and the remaining 746Gb unallocated. Is there any way to recover the 746Gb of unallocated space? Seems a waste to have a 3Tb drive that only has 2Tb of useable space.
View 6 Replies View Relateda friend is trying to download a big file from an ftp program to his pc, unfortunately it keeps downloading to his 30G partition that only has windows on it instead of the 1TB drive he's designated for download. The question is, how can he ensure that windows will download ftp files to his 1TB with plenty of room instead of downloading it to his Windows 7 partition drive? He says that Windows creates a ghost temp file of what he's downloading on the 30G and thats why he's having this issue..
View 1 Replies View Relatedhow can i convert extended drive to primary drive while doing allocation of drive during allocation of drive
View 2 Replies View RelatedI created a partition and installed XP on it and the game installs correctly (installation wouldn't even start on Win7) and it runs. However, the drivers I got when I bought the laptop are only compatible with Win7 (video drivers, wifi/lan drivers, the audio driver works fine on XP however).Because of this driver problem, I have no graphics driver to run the game (I know it works because I can start the game and hear the audio). I also couldn't connect to the internet to find and update drivers on that specific machine.
So I searched for them on another computer but after hours of searching, downloading and transferring the files to my Acer, failed to find any compatible with XP.The Acer website which I downloaded these drivers from mentions they work on XP in the description but they wouldn't install, giving the error 'not support on this operating system' or similar.FYI the hardware for the drivers I needed were: - Lite-on Wireless LAN 3rd WiFi BGN Atheros HB97 (OR Broadcom LAN BCM57780 for ethernet connection)- Intel VGA Chip UMAHas
Any good guide or book I can read for SSD's. I wanna learn which one to choose, how to install. Wanna use it as a primary drive for the OS, and have a secondary drive. How to setup my OS and computer to do that.
View 9 Replies View RelatedI have a new Laptop with Windows 7 Home edition (factory installed). It has only primary C: partition.
Is there any tweak to partition the HDD directly using windows without re-formatting the HDD
I just got my laptop back from Acer and they had given me a new hard drive. I restored a disk image backup that I had made from Acronis True Image. The backup seemed a little strange going in, but none the less it worked anyway. I then went to Disk Management to look at the setup and noticed that my primary partition is now listed as a Logical. I'm posting a screen shot of the partions and someone tell me if that looks right to them and if not how do I get my C drive back to Primary. As I said it boots ok but when I did the recovery with Acronis it didn't seem to go as smoothly as it should have.
View 9 Replies View RelatedHere's the scenario: I have a 1TB disk with several partitions on it.
#1: Primary partition with Vista on it.
#2: A 500GB primary partition used as storage/backup.
#3: A 50GB partition encrypted with Truecrypt, Logical drive
Now, I want to create a new Primary partition at the end of the drive, so I can install another copy of Windows 7. Notice my 500GB storage partition does not need to be Primary, but it is, and I cannot create any more Primary partitions. How can I change the storage partition to a logical drive, and have my new partition be Primary?
I plugged in my old IDE hard drive and had it set up as a slave and when I try booting up I get to the Windows splash screen and I hear my primary drive click and then the activity light stays solid and it won't boot. I tried a couple times and it wouldn't work so I unplugged the secondary drive and it booted right up
View 3 Replies View RelatedI have two other hard drives in my computer. My operating system now is on "E" drive. I'm wanting to replace my "E" drive with a larger and faster drive.
I am currently backing up my entire "E" drive on my "C" drive.
Is it possible to simply pull out my current "E" drive and install a new "E" drive and then restore my backup to my new "E" drive? Or is it more complicated than that?
In switching over from XP to 7 I found myself also buying almost all new components, except hard drives. Due to a number of events that no one would believe humanly possible, I managed to establish my "C:" and "D:" drives on hard drive 1, whereas hard drive 0 is a bunch of free space. The computer boots up to Windows 7 on "C:" on HD 1.
I want to switch cables on the SATA drives and then designate the new HD0 (which was HD1) as the primary active partition, but as we all know, I can't just switch cables as then the computer does not know to boot off HD0.
What the heck do I do to accomplish this?
So I have a 64MB SSD that I use as my boot drive, then I have 1TB in SATA. I have Windows loaded on my SSD and everything works great. What I want to know, how do I move the primary drive to the SATA? Right now, SSD is "C" and SATA is "E".
View 12 Replies View RelatedI have recently partitioned my c drive, to create a new drive g, i installed w7 on g and its fine and works...
c drive did have a version of vista on, i planned on downgrading it to xp...
i messesd something up trying to install xp over vista so booting up using w7, i manually deleted all the files from the c drive.... now its totally fubar, it wont let me install anything on it atall...
how can i format the c drive which is my primary partition... or so something with it? combine it back into the g partition or anything..???
i can only access my pc booting up using w7, which is running on the g partition..
So earlier this year I constructed my first computer, which I sunk about 2k into and made fantastic . But, having no experience, I installed a 32 bit Windows 7 OS, thereby limiting my available RAM. Since I am a gamer, this is a bit of an issue. Now I have a new SSD, and I was wondering if I could simply load a 64 bit OS onto that drive and boot from there, thereby avoiding the reformatting of my current drive.
The primary drive is a 1TB regular hard drive, the secondary is a 64Gig Samsung 830 SSD.
Got a new 2TB hard drive (f and have it installed, obviously showing up as an empty drive at the moment. Is it possible to use my old 320GB (c drive as boot only but still have the new one as the primary drive, programs install there, download there etc? PC is a homebuild running Win 7 64bit.
View 9 Replies View RelatedI've had a Windows 7 PC that's motherboard recently broke so I have been trying to use the hard drive with another PC. The PC I'm trying to put it into has all Windows 7 compatible parts. I get to the starting windows screen and it restarts the computer and gives me the option to Launch Startup repair. I launched startup repair and it says that it cannot fix the problems automatically. I can hookup the hard drive as a secondary hard drive and access all of the files on it but I cannot make it primary it just wont boot. The computer that the hard drive originally came from did not include a recovery/install CD.
View 1 Replies View Relatedtoday I backed up my files when prompted by the little flag icon, they went on an external HDD. Updated everything. Went back to pc after tea, and when i switch on it can't boot windows.
1.. it asks me to put the cd in, when i do it goes through to the option to upgrade, repair or custom. If i try to custom install it tells me no drives were found.
2It won't let me upgrade either.So i put the disc for the motherboard etc in and ask it to repair it says IDE drive doesn't exist or ALL primary partitions are occupied
I've just installed windows 7 ultimate 64 bit on my new laptop and when I checked my computer only one local disk was visible. When I checked disk management, this was the one shown. The disk has no name and file type.
View 4 Replies View Related