I plugged in my old IDE hard drive and had it set up as a slave and when I try booting up I get to the Windows splash screen and I hear my primary drive click and then the activity light stays solid and it won't boot. I tried a couple times and it wouldn't work so I unplugged the secondary drive and it booted right up
View 3 RepliesI am using an HP Pavillion DV9700 laptop
BIOS F.2C
AMD Turion 64x2 TL-60 2.00 GHz
2 GB on board
Windows 7 Home Premium, 32-bit OS, all updates installed
Somewhere, after a Windows 7 update many months ago, the problem started. I had no problems before. It started with the OS not recognizing the optical disk drive that came installed with the laptop. The computer's set-up BIOS recognizes the drive as being there. The optical drive does not show in Device Manager. I tried changing out the disk drive, it did not work. Soon, Windows 7 would occasionally lock up at the boot screen, but work fine on a cold reboot following a lock-up.
But then the lock-ups became permanent and cyclical. No amount of reboots would facilitate. I went to do a clean install using an external USB optical drive and accidentally discovered it cured the problem! The laptop will not lock up if the external USB optical drive is hooked up and turned on when starting the computer. I tried a clean install of the operating system. I tried updating the drivers. Windows 7 always recognizes I had problems booting and sends the error messages to Microsoft.
Got a new 2TB hard drive (f and have it installed, obviously showing up as an empty drive at the moment. Is it possible to use my old 320GB (c drive as boot only but still have the new one as the primary drive, programs install there, download there etc? PC is a homebuild running Win 7 64bit.
View 9 Replies View RelatedI've had a Windows 7 PC that's motherboard recently broke so I have been trying to use the hard drive with another PC. The PC I'm trying to put it into has all Windows 7 compatible parts. I get to the starting windows screen and it restarts the computer and gives me the option to Launch Startup repair. I launched startup repair and it says that it cannot fix the problems automatically. I can hookup the hard drive as a secondary hard drive and access all of the files on it but I cannot make it primary it just wont boot. The computer that the hard drive originally came from did not include a recovery/install CD.
View 1 Replies View RelatedI installed Ubuntu on a older Toshiba laptop. When I boot up it asks me to select either Windows 7 or Ubuntu. I want to get rid of the Ubuntu disk partition and give that 2.9 GB space to my primary hard drive. I go into compmgmt.msc but I can't execute any commands on that disk partition.
View 3 Replies View RelatedI recently purchased a new motherboard. After reinstalling windows, I noticed that my primary partition is also on my Storage Drive. Is there a way to change it back to only the SSD?
View 2 Replies View RelatedI cant get my Windows 7 to start up. I'm not sure if this is my PCs problem or windows. It starts up, gives me the ASUS screen where I can go into setup (though messing around in it hasn't helped yet). otherwise it goes to black screen where I can choose start windows normally or launch troubleshoot. if I pick start normally the windows logo comes up, loads, tursn black, and resets the PC. If I choose troubleshoot, it goes black for several minutes, shows the Windows 7 BG, and just gets stuck there. I'm not sure what to try to get it to boot.
View 1 Replies View Relateda friend is trying to download a big file from an ftp program to his pc, unfortunately it keeps downloading to his 30G partition that only has windows on it instead of the 1TB drive he's designated for download. The question is, how can he ensure that windows will download ftp files to his 1TB with plenty of room instead of downloading it to his Windows 7 partition drive? He says that Windows creates a ghost temp file of what he's downloading on the 30G and thats why he's having this issue..
View 1 Replies View Relatedhow can i convert extended drive to primary drive while doing allocation of drive during allocation of drive
View 2 Replies View RelatedI have Windows XP64 and XP 2005 installed on adjacent partitions on an 80 GB IDE hard drive. I had been accustomed to using BIOS to choose the drive and EasyBCD to choose the OS. A few days ago I was unable to boot into this drive because I kept getting the error "NTLDR missing (press Ctrl-Alt-Del)." I tried using Microsoft's BCSetup2 (I think that's what it's called) but couldn't get a floppy disk to boot.
Being that there wasn't much on this hard drive, other than the Windows OS's, I decided to reinstall the Win64 on the first partition. I find now that EasyBCD does not install on my XP64, so evidently I must have had it installed on the XP MCE partition. I'm wondering now how I can go about accessing the MCE on that other partition, or finding or remaking the boot loader.
My disk crashed and had to reload everything, I took it to Toshiba service center. Before the crush my hard disk was just one big physical disk now I have: C: physical 150.84 GB(boot, page file, crush dump, primary partition)If so can you please tell me how to do it, never done this before, partitioning, and I don't want to make a mess out of it.
View 8 Replies View RelatedAny good guide or book I can read for SSD's. I wanna learn which one to choose, how to install. Wanna use it as a primary drive for the OS, and have a secondary drive. How to setup my OS and computer to do that.
View 9 Replies View RelatedI have a new Laptop with Windows 7 Home edition (factory installed). It has only primary C: partition.
Is there any tweak to partition the HDD directly using windows without re-formatting the HDD
I have been a having a problem with my inspiron 1525 with windows 7 32-bit loaded on it. Whenever I play any DVD it either locks up the drive, explorer and the wait chain says that its waiting for network io or the playback comes out garbled. Usually this happens if I boot up the PC and then warm reboot it and the drive won't even eject. I have forced ejected it with a paper clip but explorer doesn't even recognize that it just finally starts to spin up the drive outside the pc. and an attempted bios update but that almost fried my motherboard but it flashed itself back to A13 from A17 automatically. the Drive I am using is pbds dvd+-rw ds-8w1p
View 4 Replies View RelatedCan i format the primary partition in a dual booted system that is xp and windows 7 where xp is the primary partiyion. And would the other os still work
View 1 Replies View RelatedI just got my laptop back from Acer and they had given me a new hard drive. I restored a disk image backup that I had made from Acronis True Image. The backup seemed a little strange going in, but none the less it worked anyway. I then went to Disk Management to look at the setup and noticed that my primary partition is now listed as a Logical. I'm posting a screen shot of the partions and someone tell me if that looks right to them and if not how do I get my C drive back to Primary. As I said it boots ok but when I did the recovery with Acronis it didn't seem to go as smoothly as it should have.
View 9 Replies View RelatedHere's the scenario: I have a 1TB disk with several partitions on it.
#1: Primary partition with Vista on it.
#2: A 500GB primary partition used as storage/backup.
#3: A 50GB partition encrypted with Truecrypt, Logical drive
Now, I want to create a new Primary partition at the end of the drive, so I can install another copy of Windows 7. Notice my 500GB storage partition does not need to be Primary, but it is, and I cannot create any more Primary partitions. How can I change the storage partition to a logical drive, and have my new partition be Primary?
I have two other hard drives in my computer. My operating system now is on "E" drive. I'm wanting to replace my "E" drive with a larger and faster drive.
I am currently backing up my entire "E" drive on my "C" drive.
Is it possible to simply pull out my current "E" drive and install a new "E" drive and then restore my backup to my new "E" drive? Or is it more complicated than that?
In switching over from XP to 7 I found myself also buying almost all new components, except hard drives. Due to a number of events that no one would believe humanly possible, I managed to establish my "C:" and "D:" drives on hard drive 1, whereas hard drive 0 is a bunch of free space. The computer boots up to Windows 7 on "C:" on HD 1.
I want to switch cables on the SATA drives and then designate the new HD0 (which was HD1) as the primary active partition, but as we all know, I can't just switch cables as then the computer does not know to boot off HD0.
What the heck do I do to accomplish this?
So I have a 64MB SSD that I use as my boot drive, then I have 1TB in SATA. I have Windows loaded on my SSD and everything works great. What I want to know, how do I move the primary drive to the SATA? Right now, SSD is "C" and SATA is "E".
View 12 Replies View RelatedI have recently partitioned my c drive, to create a new drive g, i installed w7 on g and its fine and works...
c drive did have a version of vista on, i planned on downgrading it to xp...
i messesd something up trying to install xp over vista so booting up using w7, i manually deleted all the files from the c drive.... now its totally fubar, it wont let me install anything on it atall...
how can i format the c drive which is my primary partition... or so something with it? combine it back into the g partition or anything..???
i can only access my pc booting up using w7, which is running on the g partition..
I just bought a cheap laptop from Walmart yesterday with windows 7. I am not a fan of it so I wanted to see if I could dual boot windows xp. Luckly it is a IDE machine not sata. So I Downloaded a copy of windows xp (I have a license key for all the people who would shun me for it, it is paid for). Well when I was making a new partition to install windows xp on I set the new partition to active, rebooted and wala, my computer won't boot because I'm a bone head sometimes. I have access to another windows 7 comp that is Extremly slow and I put emphasis on Extremly
View 4 Replies View RelatedSo earlier this year I constructed my first computer, which I sunk about 2k into and made fantastic . But, having no experience, I installed a 32 bit Windows 7 OS, thereby limiting my available RAM. Since I am a gamer, this is a bit of an issue. Now I have a new SSD, and I was wondering if I could simply load a 64 bit OS onto that drive and boot from there, thereby avoiding the reformatting of my current drive.
The primary drive is a 1TB regular hard drive, the secondary is a 64Gig Samsung 830 SSD.
Here's my setup:
Corrupt Vista install on Primary HD
Win 7 (and soon to be Linux and maybe XP) on a second.
I want to be able to take out the primary hd to move it to a NAS unit and just have the second hd in. Problem is, the current bootloader is on the Vista drive. I need to know if there is a way to move this to the Win 7 HD without having to reinstall Win 7 at this time, though I know I will have to when it is released.
I created a new partition, and accidentally made it my primary partition (C: being my primary one and D: being by other one) now whenever I boot up I get NTLDR missing ctrl+alt+del to restart. So I downloaded the windows 7 repair files from one website and tried to fix it, but I failed and now I wanted to know is there any other way I can fix using command prompt or will I just have to reinstall windows 7.
View 4 Replies View Relatedtoday I backed up my files when prompted by the little flag icon, they went on an external HDD. Updated everything. Went back to pc after tea, and when i switch on it can't boot windows.
1.. it asks me to put the cd in, when i do it goes through to the option to upgrade, repair or custom. If i try to custom install it tells me no drives were found.
2It won't let me upgrade either.So i put the disc for the motherboard etc in and ask it to repair it says IDE drive doesn't exist or ALL primary partitions are occupied
I've just installed windows 7 ultimate 64 bit on my new laptop and when I checked my computer only one local disk was visible. When I checked disk management, this was the one shown. The disk has no name and file type.
View 4 Replies View RelatedI want to delete the hidden primary partition that came by default from transcend 4 GB pen drive model TS4GJFV30. It is preventing the drive to boot with windows 7. Also it is not allowing the drive to play media files on media peripherals.
View 3 Replies View RelatedI bought a new 2 Tb hard drive because my primary one was getting full. I would like to do a fresh install on the primary drive once I have moved over all the games, videos, pictures, etc. that I don't want to lose. I can format the primary drive and reinstall windows without affecting the content on the second drive, correct? Is there anything I need to know?
View 7 Replies View RelatedI recently reformatted my Windows 7 32bit system on my primary HDD (C). When I open My Computer, my secondary HDD (D) appears, but when I try to open it, it shows as empty. However, if I look at the properties of D, it says that only 200gb out of 500gb of free space is available. I booted into a live version of Ubuntu and the secondary HDD appears with all data in it and accessible, so I know there is nothing physically wrong with the drive. I know that I could brute force this problem by making a copy of the drive in Ubuntu, then reformatting it in Win7, but I'm hoping there's an easier solution that I'm just not aware of.
View 5 Replies View Relatedi had windows 7 OS in drive c . while i was partitioning drive c using disk management, disk 0 which has all recovery image drive c were converted to simple type.
View 5 Replies View Related