Windows 7 Locks Up On Boot - Related To CD / DVD Optical Disk Drive
Oct 12, 2011
I am using an HP Pavillion DV9700 laptop
BIOS F.2C
AMD Turion 64x2 TL-60 2.00 GHz
2 GB on board
Windows 7 Home Premium, 32-bit OS, all updates installed
Somewhere, after a Windows 7 update many months ago, the problem started. I had no problems before. It started with the OS not recognizing the optical disk drive that came installed with the laptop. The computer's set-up BIOS recognizes the drive as being there. The optical drive does not show in Device Manager. I tried changing out the disk drive, it did not work. Soon, Windows 7 would occasionally lock up at the boot screen, but work fine on a cold reboot following a lock-up.
But then the lock-ups became permanent and cyclical. No amount of reboots would facilitate. I went to do a clean install using an external USB optical drive and accidentally discovered it cured the problem! The laptop will not lock up if the external USB optical drive is hooked up and turned on when starting the computer. I tried a clean install of the operating system. I tried updating the drivers. Windows 7 always recognizes I had problems booting and sends the error messages to Microsoft.
I currently do not have any internal optical drive, but I do have a USB optical drive instead. Would it be possible to boot up Windows 7 from the external drive in the UEFI Bios? This is for a new computer without a formatted hard drive, if it helps.
I plugged in my old IDE hard drive and had it set up as a slave and when I try booting up I get to the Windows splash screen and I hear my primary drive click and then the activity light stays solid and it won't boot. I tried a couple times and it wouldn't work so I unplugged the secondary drive and it booted right up
I purchased a new PC with Windows 7 in June 2012. It came with a Samsung optical disk containing Windows 7. I am eligible for the $14.99 USD upgrade to Windows 8.Will there be an installation disk for Windows 8 available at this price and if not, then how much more will it cost?If not, then how should I ensure that I can easily install Windows 8 after a hard disk crash? Do I have to keep my Samsung optical disk of Windows 7?
I have an Alienware M14x R1 with a SSD - Crucial M4 in the main spot and the stock HD in the optical drive. I have never had any issues with any of this stuff before this clean install - and I have done clean installs previously. I also used Parted Magic to Secure Erase my SSD and HD before install.I am experiencing some pretty frustrating problems:
1. I have NO INTERNET CONNECTION (everyone keeps telling me to install drivers...how can I do this without internet connection??)
2. Windows is not recognizing my second hard drive in the optical drive even though it did when I was installing and showed it at the section where you can add new partitions etc
3. My display adpater is not working as I have a 1600x900 screen and I can only go up to 1024x768...
2 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled PXE-M0F: Exiting Nvidia Boot Agent DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
I cant get my Windows 7 to start up. I'm not sure if this is my PCs problem or windows. It starts up, gives me the ASUS screen where I can go into setup (though messing around in it hasn't helped yet). otherwise it goes to black screen where I can choose start windows normally or launch troubleshoot. if I pick start normally the windows logo comes up, loads, tursn black, and resets the PC. If I choose troubleshoot, it goes black for several minutes, shows the Windows 7 BG, and just gets stuck there. I'm not sure what to try to get it to boot.
My friend has an HP Pavilion DV6 Entertainment Notebook with Windows 7 Home Premium 64bit installed. It's only about 3 months old. I rebuilt the unit with a fresh copy of Win 7 HP 64bit as I did not want all the bloat-ware that came with the machine. The issue is that the unit is unable to see the optical drive (no optical drive icon). In the device manager, there is an exclamation mark next to the optical drive. It was working originally. Windows 7 normall takes care of the drivers for this drive doesn't it? Is the optical drive faulty. I've tried un-installing and re-installing but still hasn't corrected itself.
im off to my first computer build and i've got basically everything except for an optical drive, i saw this video about using a flash drive to boot win 7, im a little cautious in doing this cuz the vid is already 2 years old, im wondering if its still possible? I dunno if i can post the link of the vid here so you guys can put some input if that way of booting win 7 still works or if theres another way to do it, i do have the windows7 os but am still waiting for my optical drive wich would arrive next week, and im really excited to boot my pc that ive already installed everything else and am just waiting for that optical drive
wil i be able to install windows 7 from a external optical drive? and if so. what would be a good optical drive to get? that is really good and reliable?
After installing three or four updates yesterday my laptop now clicks the optical drive a couple of times as I start any video or music file on the hard drive. Not a fatal flaw, but, very irritating just the same. Did a system restore to the morning before the updates- same behavior remains. Installed updates again, removed them one at a time, same thing. Restored to over a week ago, same behavior! What is up with this clicking. The files start and play immediately, no problem there, I'd just like the optical drive to mind it's own business. Movie discs play fine, burns stuff fine, just go to your corner and SHUT UP!
My HP laptop HD crashed, am trying to replace it with a Kingston HyperX 120GB SSD. I do not have Windows installation disks, only have Windows Recovery Disks. All installation instructions I have found for SSD's is for cloning, which I cannot do since the HD is deadI have installed the SSD, booted into BIOS, this simple BIOS version doesn't allow me to change anything on the HD, but it does recognize it and let me do a HD test, so it does recognize the SSD. I then put the Windows Recovery disk in the CD drive, attempted to boot up, but the CD drive just spins and spins but never boots up. I thought the CD drive might be bad, so I tried an external USB CD drive with the Recovery disk, but it does the same (just spins). I even got a new Windows 7 installation disk (from another PC) to see if it will boot from it, but get nothing but a spinning CD I have not done anything yet to the HyperX SSD, haved not formatted or partitioned it.I thought this would be done by Recovery on the OS installationThe BIOS is set up to first boot from the CD drive, so the boot order is not the issue.
Yesterday night I finally got the time around to finish the fresh installation of Windows 7, and I created a hard link for both my "Program Files" and "Program Files (x86)" using the command prompt in the Windows 7 installation disk.
The hard link points to another partition(E:) which I use to store Program Files purely. However, at the time of creating the hard link using the Windows 7 Installation disc, the volume letters were different than what it was in Windows. Now when I tried to access my files from Windows, it would give me an error. To better illustrate the problem,
The image above shows the hard link in (C:) and the volume which I link to (E:)
The image above shows the hard link and the directory it links to in E:. Notice that the Internet Explorer 8 on taskbar is no longer available. On the other hand, when I tried to install Firefox on "C:Program Files (x86)", it would be put in "C:ProgramData" which appears to be a new backup system that Microsoft used in case "Program Files" folder was deleted.
I know I'm in for another re-install, but what should I do to make the hard links work properly?
I want to remove my optical drive (ASUS dvd/rw) as I never use it, however after I disconnected it Windows wont load. It begins to load and then flashes a blue screen and restarts. If I plug my optical drive back in everything is boots up fine. how I can remove my drive and still be able to boot?
Things I have tried (with no success):
- Disabling and uninstalling the drive from the control panel
- checking boot priority (SSD is my boot drive), optical drive is now completely removed from boot sequence in BIOS (it was 3rd)
In windows repair (following the restart from blue screen) I found this: Root cause found recent driver installation or uprgrade may be preventing the system from starting Repair Action: system files integrity check and repair Result: Failed Error Code: 0x490
I installed a new DVD program and my DVD Rom stopped responding. When I checked he Device Manager It said "A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)"
It seems as though my two optical dvd-rom & dvd-ram drives are working only intermittently, since loading windows 7 64 ultimate from vista 64 ultimate.
While there are many drivers that I have saved as downloads plus those that can be found online there are drivers that are only available via disk, so having the optical drives consistently function properly is of the utmost importance.
Anyone with any suggestions are solutions please let us all know your thoughts.
I have a Toshiba Satellite Laptop which is running Windows 7 Home Premium 64 bit.I don't know how long it has been since the DVD drive stop functioning. Whenever I insert a factory DVD,CD, or even custom/ blanks my drive does not recognize the inserted device. For some reason, which I cant understand, the drive itself clocks, but the OS isn't recognizing anything. When I checked the drivers, it said they were up to date.
My cd/dvd/bluray read/write drive on my laptop suddenly disappeared. All "my Computer" shows is my C: drive, whereas I used to have a D: drive. I was uninstalling a few programs before it happened, one of which was Daemon ProTools, which I suspect to be the culprit.
I read that the program TestDisk might be able to help. I ran it but only my hard drive shows up in the program too. When I insert a disk, I can hear the drive reading it, so I know it didn't become disconnected.
I presently have a 6 year old Dell X300 running XP, it has been a good machine but is getting 'tired' and I am looking at getting something new. The type of machines I am looking at like a HP Pavilion dm1 or a Lenovo Thinkpad X100/ 120 (new) running windows 7 of course. They do not come up a optical drive.So my question is what happens in the case of a HD failure?With the X300 I have reloaded windows on to the new HD using the CD drive and recovery disks provided.But in 2011 what is the way of being prepared for a HD failure with machines that have no optical drive and no windows 7 supplied reinstallation cds/dvds?Is there way of doing it thru a USB flask drive? is that the answer?
I just bought a new desktop PC ASUS CM6870 and already I got a problem with windows 7; my optical drive do not play dvd , blu-ray or cd or rw etc... it only play one cd once , after that nothing! I try to find the problm, I watch the motherboard and click CD-ROM Drive properties, on the device status you can read: " Windows cannot start this hardware devicecause its configuration information (in the registry) is incomplete or damaged. (code 19)and an otherplace I can't remeber where they write " ATAPI BD E DHI2E3SH ATA device has a driver problem " spend 1200$ and only 3 days of use
I have ordered the parts for a new computer which I am going to build, however the Windows 7 I have is a disc and I have not ordered an optical drive. Do I need to now buy one or is there a way around this?
I have a disk which is partitioned into 3 = 1 is just the mft files no drive allocated, c: is my operating system and d: was the operating system. I need to change C: to boot now rather than my d:. When i start up, I have to press f1 to get started and 2 win 7 shows up. I have to move the arrow down to select the second to boot up, how do I change it,
I have a Toshiba 64-bit home premium. Satallite. I got a pop up message related to optical drive power to turn it on. I checked the notification area where the icon resides. i'm not understanding the purpose. When i point to the icon, it says its off. When I right click on lthe icon the drop down list gives me options; eg. optical drive auto lock >> unlock timed settings >> confirm power on/off >> notify power on/off.
I took out my internal optical drive from my Sony Vaio F13 laptop and put in SSD. Now I bought USB/SATA cabel and I connected the optical drive to the laptop, it is recognized in windows but it is treated as a hard drive (or removable disk). When I double click it in My Computer it says "Insert a disk into Removable disk. Is there a way to make my optical drive work via USB like this?
I've a problem with my optical drive. After finalizing the disk during burning when it is again inserted it is just throwing out the disk without reading the contents in it. But it is reading the disks which were previously written using the same optical drive.Those disks which are thrown out when inserted into another optical drive of another system it is reading them.
I am using Windows 7, Enterprise, 32-bit OS. It's Dell E5400 notebook. My machine for sometime was a part of a domain. Now I have changed from Domain to Work group. I don't know what went wrong, but I cannot access neither optical drive nor pen drive at usb. I went for take ownership at security tab at their properties. But there was not security tab there. I formatted my pen drive with NTFS file system and found security tab. But no use. I cannot take ownership. I am getting these errors : "an error occurred while applying security information to: :F" and "access is denied" I went in safe mode. Everything was accessible there. From safe mode, I tried to give permission to "administrators" including my user account, but same error occurred.
