Windows 7 Won't Load If Remove Optical Drive (error Code 0x490)
Apr 1, 2012
I want to remove my optical drive (ASUS dvd/rw) as I never use it, however after I disconnected it Windows wont load. It begins to load and then flashes a blue screen and restarts. If I plug my optical drive back in everything is boots up fine. how I can remove my drive and still be able to boot?
Things I have tried (with no success):
- Disabling and uninstalling the drive from the control panel
- checking boot priority (SSD is my boot drive), optical drive is now completely removed from boot sequence in BIOS (it was 3rd)
In windows repair (following the restart from blue screen) I found this:
Root cause found recent driver installation or uprgrade may be preventing the system from starting Repair Action: system files integrity check and repair Result: Failed Error Code: 0x490
View 1 Replies
ADVERTISEMENT
Jan 13, 2013
I've had trouble with my machine starting. I've done all the advice the 7 Forum suggests, running start up 3 times...etc and it will work for a day or two, then not start. Then if I hit the reset button a couple of times, it will go into the start up repair and I end up with this message: Repair Action/ System files Integrity check and repair Result Failed / Error code = 0x490 Time Taken / 700863 ms I've run sfc from an elevated window and it says everything is fine.
View 4 Replies
View Related
Jun 28, 2011
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory
View 6 Replies
View Related
Jun 14, 2010
I�m running a single Windows 7 Ultimate x86 OS on my laptop and it used to work very well �till earlier today once I get back home trying to use my computer as usual to find out that it always runs the startup repair after showing the words �windows is loading files� instead of starting windows normally. Once the diagnostic & repair process is done it tells me that Startup Repair cannot repair this computer automatically. When I view the details I get the following under Root cause found:
Boot configuration is corrupted.
Repair action: Partition table repair.
Result: Failed. Error code = 0x490
After many times doing the previous repairs with no result I went to Command Prompt in order to check my system drive to find out that both �Windows� & �Program Files� directories are not existed there anymore. Instead, there�s a �Windows.old� directory that contains those 2 system directories as well as �Users� & �PerfLogs� directories plus the �autoexec.bat� & �config.sys� files. Sure there�s noway to use the system restore tool or anything else even using my Windows boot DVD. Still can�t use the cmd commands single handedly to fix this.As I said earlier I have never faced such problem before plus I have no idea how to regain my windows since I can never format my system drive as I need to backup all the files, settings, bookmarks & favorites located in my user profile first.
View 9 Replies
View Related
Apr 24, 2009
I've got a big problem this morning. My Windows 7 won't boot! All it does is restart at the loading screen. Win 7 is the only OS i have on the PC atm.
Apparantly i have a corrupted boot file and i have no idea how to fix it in win 7
it says: Root cause found:
Boot configuration is corrupt
Repair action: Partition table repair
Result: Failed. Error code = 0x490
View 2 Replies
View Related
Oct 6, 2012
got a dell 531s aint sure for the specs right off hand, BUT i got this error code after putting my hard drive into a different tower an I can NOT get it to go away.i've done everything possible that I'd found online an everything. I'm ready to just part it out to my sister & brother in laws but my fiance needs a computer
View 5 Replies
View Related
Jul 6, 2012
while I try the troubleshooting wizard in my computer, I receive the message which says that it can not continue due to the error code 0x80070002. this is because I want to reactivate a software called epiinfo7 which has stopped working. so how this error code can be removed?
View 1 Replies
View Related
Jun 16, 2012
I have an Alienware M14x R1 with a SSD - Crucial M4 in the main spot and the stock HD in the optical drive. I have never had any issues with any of this stuff before this clean install - and I have done clean installs previously. I also used Parted Magic to Secure Erase my SSD and HD before install.I am experiencing some pretty frustrating problems:
1. I have NO INTERNET CONNECTION (everyone keeps telling me to install drivers...how can I do this without internet connection??)
2. Windows is not recognizing my second hard drive in the optical drive even though it did when I was installing and showed it at the section where you can add new partitions etc
3. My display adpater is not working as I have a 1600x900 screen and I can only go up to 1024x768...
View 8 Replies
View Related
Nov 24, 2009
Ive Googled this and there seems to be lots of info but no resolution that I can find. I have a Buffalo NAS drive which I can see in Explorer but cant access - I keep getting an error code 1208. I am using the standard W7 Home Professional security and Microsoft Security Essentials. Ive rung Buffalo and they have indicated its a Samba issue with Windows 7.
Is there any resolution to this issue yet (without requiring a Registry hack)?
View 0 Replies
View Related
Sep 16, 2012
The HDD had bad sectors and CHKDSK didn't complete, so I cloned the bad HDD onto a new good one.When I try to login I Explorer appears to crash and I get an the error code: 0xc0000022. I am able to login to safe mode though.Here is what I have tried1.Ran CHKDSK 2. Ran SFC /scannow3. Tried to run Win 7 Ultimate x64 SP1 setup.exe but I get "unknown error has occured" following the repair guide (Repair Install)The last thing I want to do is a new format, though it is looking like that will be my option
View 4 Replies
View Related
Oct 25, 2010
My friend has an HP Pavilion DV6 Entertainment Notebook with Windows 7 Home Premium 64bit installed. It's only about 3 months old. I rebuilt the unit with a fresh copy of Win 7 HP 64bit as I did not want all the bloat-ware that came with the machine. The issue is that the unit is unable to see the optical drive (no optical drive icon). In the device manager, there is an exclamation mark next to the optical drive. It was working originally. Windows 7 normall takes care of the drivers for this drive doesn't it? Is the optical drive faulty. I've tried un-installing and re-installing but still hasn't corrected itself.
View 3 Replies
View Related
Nov 18, 2011
im off to my first computer build and i've got basically everything except for an optical drive, i saw this video about using a flash drive to boot win 7, im a little cautious in doing this cuz the vid is already 2 years old, im wondering if its still possible? I dunno if i can post the link of the vid here so you guys can put some input if that way of booting win 7 still works or if theres another way to do it, i do have the windows7 os but am still waiting for my optical drive wich would arrive next week, and im really excited to boot my pc that ive already installed everything else and am just waiting for that optical drive
View 15 Replies
View Related
Jan 9, 2012
Why do area51reopened close "[Solved] Optical drive disappears in windows 7" it was never solved. Shall this remain a mystery to us all?
View 2 Replies
View Related
Oct 29, 2011
Windows cannot load drivers code 10?
View 2 Replies
View Related
Dec 17, 2010
wil i be able to install windows 7 from a external optical drive? and if so. what would be a good optical drive to get? that is really good and reliable?
View 5 Replies
View Related
Dec 30, 2011
what do i need to upgrade to be able to play dvd's on my notebook that has windows 7 starter
View 4 Replies
View Related
Mar 7, 2012
My DVD optical drive appears as CD drive and doesn't react to any disc. The latest driver is installed.
View 5 Replies
View Related
Oct 18, 2012
Almost new Inspiron 5720- Home Premium. i7 quad.
After installing three or four updates yesterday my laptop now clicks the optical drive a couple of times as I start any video or music file on the hard drive. Not a fatal flaw, but, very irritating just the same. Did a system restore to the morning before the updates- same behavior remains. Installed updates again, removed them one at a time, same thing. Restored to over a week ago, same behavior! What is up with this clicking. The files start and play immediately, no problem there, I'd just like the optical drive to mind it's own business. Movie discs play fine, burns stuff fine, just go to your corner and SHUT UP!
View 6 Replies
View Related
Oct 17, 2011
Get error code 0xCOAA0301 returned from drive. Found it's a known problem so tried solutions inc Windows troubleshooter. It says fault fixed and and drive shows up in explorer and will play music cds. As soon as screen for repair disc comes up drive is shown as disconnected even though it can be heard running. Netbook tries to create disc then returns error message.
View 2 Replies
View Related
Jan 7, 2013
I am getting a beeping sound noise from the top right corner of my vaio laptop. The problem seems to be one my hardware drivers, to make matters worse i cant even back up i just get the error code in the title! I have checked my "system reserved space" which is at 100mb so i have enough memory to back it up. I also had drivers problems with my laptop when trying to establish wifi connection after moving house, "missing driver" i now use a cable.
View 1 Replies
View Related
Nov 4, 2011
My HP Pavilion with Windows 7 is not seeing my Samsung TS-H653L CD/DVD reader/writer. When checking my Device Manager for this unit, it shows the following message: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)." I tried to "update this driver" but the answer is that "this driver is up to date". Can't find any website with Samsung TS-H653L driver updates. Tried removing the driver and rebooting but same thing happens.
View 3 Replies
View Related
Dec 27, 2011
would like to install Windows 7 home edition on my wifes Acer notebook, running xp at present.there is no optical drive. can I use my HP laptop'if so
View 1 Replies
View Related
Feb 3, 2013
I currently do not have any internal optical drive, but I do have a USB optical drive instead. Would it be possible to boot up Windows 7 from the external drive in the UEFI Bios? This is for a new computer without a formatted hard drive, if it helps.
View 4 Replies
View Related
Oct 12, 2011
I am using an HP Pavillion DV9700 laptop
BIOS F.2C
AMD Turion 64x2 TL-60 2.00 GHz
2 GB on board
Windows 7 Home Premium, 32-bit OS, all updates installed
Somewhere, after a Windows 7 update many months ago, the problem started. I had no problems before. It started with the OS not recognizing the optical disk drive that came installed with the laptop. The computer's set-up BIOS recognizes the drive as being there. The optical drive does not show in Device Manager. I tried changing out the disk drive, it did not work. Soon, Windows 7 would occasionally lock up at the boot screen, but work fine on a cold reboot following a lock-up.
But then the lock-ups became permanent and cyclical. No amount of reboots would facilitate. I went to do a clean install using an external USB optical drive and accidentally discovered it cured the problem! The laptop will not lock up if the external USB optical drive is hooked up and turned on when starting the computer. I tried a clean install of the operating system. I tried updating the drivers. Windows 7 always recognizes I had problems booting and sends the error messages to Microsoft.
View 5 Replies
View Related
Jan 17, 2013
Free down load vga remove for windows 7?
View 2 Replies
View Related
Jan 15, 2012
I installed a new DVD program and my DVD Rom stopped responding. When I checked he Device Manager It said "A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)"
View 4 Replies
View Related
Jan 12, 2009
It seems as though my two optical dvd-rom & dvd-ram drives are working only intermittently, since loading windows 7 64 ultimate from vista 64 ultimate.
While there are many drivers that I have saved as downloads plus those that can be found online there are drivers that are only available via disk, so having the optical drives consistently function properly is of the utmost importance.
Anyone with any suggestions are solutions please let us all know your thoughts.
View 9 Replies
View Related
Jun 23, 2011
I have a Toshiba Satellite Laptop which is running Windows 7 Home Premium 64 bit.I don't know how long it has been since the DVD drive stop functioning. Whenever I insert a factory DVD,CD, or even custom/ blanks my drive does not recognize the inserted device. For some reason, which I cant understand, the drive itself clocks, but the OS isn't recognizing anything. When I checked the drivers, it said they were up to date.
View 3 Replies
View Related
Jan 8, 2012
My cd/dvd/bluray read/write drive on my laptop suddenly disappeared. All "my Computer" shows is my C: drive, whereas I used to have a D: drive. I was uninstalling a few programs before it happened, one of which was Daemon ProTools, which I suspect to be the culprit.
I read that the program TestDisk might be able to help. I ran it but only my hard drive shows up in the program too. When I insert a disk, I can hear the drive reading it, so I know it didn't become disconnected.
View 6 Replies
View Related
Jan 14, 2011
I presently have a 6 year old Dell X300 running XP, it has been a good machine but is getting 'tired' and I am looking at getting something new. The type of machines I am looking at like a HP Pavilion dm1 or a Lenovo Thinkpad X100/ 120 (new) running windows 7 of course. They do not come up a optical drive.So my question is what happens in the case of a HD failure?With the X300 I have reloaded windows on to the new HD using the CD drive and recovery disks provided.But in 2011 what is the way of being prepared for a HD failure with machines that have no optical drive and no windows 7 supplied reinstallation cds/dvds?Is there way of doing it thru a USB flask drive? is that the answer?
View 9 Replies
View Related
Sep 16, 2012
I just bought a new desktop PC ASUS CM6870 and already I got a problem with windows 7; my optical drive do not play dvd , blu-ray or cd or rw etc... it only play one cd once , after that nothing! I try to find the problm, I watch the motherboard and click CD-ROM Drive properties, on the device status you can read: " Windows cannot start this hardware devicecause its configuration information (in the registry) is incomplete or damaged. (code 19)and an otherplace I can't remeber where they write " ATAPI BD E DHI2E3SH ATA device has a driver problem " spend 1200$ and only 3 days of use
View 2 Replies
View Related
