HDD Went Bad Error Code 0xc0000022 Can't Repair New Cloned Drive?
Sep 16, 2012
The HDD had bad sectors and CHKDSK didn't complete, so I cloned the bad HDD onto a new good one.When I try to login I Explorer appears to crash and I get an the error code: 0xc0000022. I am able to login to safe mode though.Here is what I have tried1.Ran CHKDSK 2. Ran SFC /scannow3. Tried to run Win 7 Ultimate x64 SP1 setup.exe but I get "unknown error has occured" following the repair guide (Repair Install)The last thing I want to do is a new format, though it is looking like that will be my option
Get error code 0xCOAA0301 returned from drive. Found it's a known problem so tried solutions inc Windows troubleshooter. It says fault fixed and and drive shows up in explorer and will play music cds. As soon as screen for repair disc comes up drive is shown as disconnected even though it can be heard running. Netbook tries to create disc then returns error message.
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+ 2 Hitachi HDT725032VLA SCSI 320 gb hard drives Nvidia Geforce 8800 GS Graphics Card 3gb of system memory
When I attempt to open various programs (Genie Backup, Adobe X for example) I get this error message. I've had problems with the OS, and would really like to back up my files and do a clean install.
Since installing the latest Windows Update (Critical Update) I am unable to re-boot.The computer posts and gets to the windows screen and when about to load up into explorer I get the following error message in a Box. "The application was unable to start correctly (0xc0000022). Click OK to close the applciation. The actual application is explorer.exe. Application error. If I click on OK the screen goes blank. (Black screen) Hitting CTR ALT Del gives me the options but when hitting on Start Task Manager I receive the same error this time the applciaton being Task Manager with the same error code as above. I am able to start up in Safe Mode and have tried to both use the built in Startup Repair (which is unable to fix the problem) and also have tried to go back to a previous version via System Restore without any luck. The same errors appear each time.
i am trying to create a restore point in my system but everytime i am getting this message: Error message was: "System Restore" did not complete successfully. Your computer's system files and settings were not changed."Details: An unspecified error occurred during System Restore (0xc0000022)." i've even run System File Checker [SFC] and scan it but it shows that there is no integrity error. but after that while creating a restore point same error message was there. so,how should i create a restore point?
I installed Windows 7 on my D: drive and it was only 80GB, and had everything running to my satisfaction. Started adding a few programs from my Vista install and thought the drive was to small, so cloned the drive unto a backup drive and installed a 1TB drive. Cloned the image back unto the new drive, but when I try to dual boot, it doesn't see Windows 7. I tried booting from the Windows 7 disk, to do a startup repair, but it doesn't see Windows 7 installed on the new drive.
I installed my sandisk pulse ssd 256gb sata iii on my sata ii moo via pcie sata iii card. every now and then I get the boot disk error messages - CTRL-AL-DEL to restart . I set it as my primary disk boot and disabled the wd blue from appearing on bios hasrd disk selection (which also has os installed)
I know I don't get sata iii speed on my mobo but am more worried about boot disk error messages.
any fix for this? should I reinstall my win 7 ultimate 64 bit upgrade on the ssd and start afresh? at the same time save all data to external hdd and wipe the OS clean off the wd 500gb - then copy all music and sundry back to the wd blue?
I plan to get windows 8 asap while the upgrade version is on offer till end of January 2013.
after my hardware plan works will a clean install of windows 8 pro upgrade wipe my ssd clean fixing the problem?
I installed Win 7 to a SataIII drive/port with the intention of doing a bootable clone to a SataII drive/port. However on completion of the first install I realised that my cloning software was not capable of cloning the SRP (system reserved partition)Plan B ? Installed a second copy of Win 7 to the SataII drive/port on a single partition (no SRP) with the intention of cloning over the SataIII drive to eliminate the SRPWas hesitant to do this as the clone software wipes the SataIII drive so as a tester I cloned the SataII drive with the single partition to a spare SataII drive and it copied ok. Unfortunately when I disconnected the SataIII and SataII source drive the recently cloned spare SataII drive would not boot. The boot manager prompts the user to accept either of the two installed versions of Win 7 and whichever you nominate the spare SataII drive fails to boot. I installed the Win 7 repair disc to fix the start up but it displayed a message that it was unable to fix it.
Desktop runs Windows 7 (64bit) Laptop runs XP (32 bit)I have programs on my laptop that I want to be able to run on my desktop. Programs that I no longer have install information/CD keys for. I have no trouble making partitions. A 'clean' install of XP onto the partition allows me to dual boot flawlessly using EasyBCD.What i *want* to do is be able to 'clone' my XP drive to the partition to be able to run those programs.
I had been thinking about upgrading to Windows 7 for sometime, and after my Raid array failed I wasn't forced to but it happened to be perfect timing.
Instead of waiting till my replacement drive arrived, I installed Windows 7 on a different drive temporarily.
After I received my new drive, I setup my array again and installed Windows 7 once again without a hitch. After installing all of my programs, games, etc. I started to notice both the User folder and Documents & Settings folders were both identical and were being updated simultaneously.
I know I didn't properly remove the old installation, but I've never seen Windows do this before. Very Odd. I've formatted the other drive and everything is good now, but I thought it was odd and wondered if it was a bug or a known issue.
Ive Googled this and there seems to be lots of info but no resolution that I can find. I have a Buffalo NAS drive which I can see in Explorer but cant access - I keep getting an error code 1208. I am using the standard W7 Home Professional security and Microsoft Security Essentials. Ive rung Buffalo and they have indicated its a Samba issue with Windows 7.
Is there any resolution to this issue yet (without requiring a Registry hack)?
I want to remove my optical drive (ASUS dvd/rw) as I never use it, however after I disconnected it Windows wont load. It begins to load and then flashes a blue screen and restarts. If I plug my optical drive back in everything is boots up fine. how I can remove my drive and still be able to boot?
Things I have tried (with no success):
- Disabling and uninstalling the drive from the control panel
- checking boot priority (SSD is my boot drive), optical drive is now completely removed from boot sequence in BIOS (it was 3rd)
In windows repair (following the restart from blue screen) I found this: Root cause found recent driver installation or uprgrade may be preventing the system from starting Repair Action: system files integrity check and repair Result: Failed Error Code: 0x490
I am getting a beeping sound noise from the top right corner of my vaio laptop. The problem seems to be one my hardware drivers, to make matters worse i cant even back up i just get the error code in the title! I have checked my "system reserved space" which is at 100mb so i have enough memory to back it up. I also had drivers problems with my laptop when trying to establish wifi connection after moving house, "missing driver" i now use a cable.
In the last few months I have been getting error messages in my Yahoo mail account. It will not go to next email and returns an 'Error Code 5' or recently an 'Error Code 15'. It says "Sorry for the inconvenience. You have stumbled upon an unexpected, temporary problem." This happens every other email. What are these codes and why is this happening?
i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
Every time I try to log in to my user, (which is administrator) I am met by a box containing the error in the title. I am able to use safe mode fine (which I'm using now) and have tried doing numerous scans and fixes such as SFC-Scannow, Norton Antivirus and System Restore but each one cannot find any threats. Close to the time this started happening, I turned off my laptop by the power switch instead of using the "Start" menu as it was taking ages to switch off.
can't play black ops 2 on my pc. says "the application was unable to start correctly (0xc0000022) click to close application" asrock z77 extreme4i7 377016gb g.skill viper memory (4x4gb) ddr3-1600 cl9ocz agility4 ssd 256gb sata3seasonic m12ii-750 power suppply 750watts m-series
I am using Windows 7 32-bit Premium. I'm trying to run a Batch file with several dll's, and I'm getting this error:Banner: Error Occurred - Add LicenseBody: Unable to enumerate resources. Error Code: 15106I have tried to google this, but I haven'tAlso, if I even try to register any of the Batch's DLLs manually, I get this error:Banner: RegSvr32body: The Module "C:Bla Bla Bla...." was loaded but the call to "INSERT DLL HERE" failed with error code 0x80028011c.For more information about this problem, search online using the error code as a search term.
i downloaded a disk image iso file for one of my programs. i mounted and ran the image. the setup.exe file runs fine but when i make any selction i get a "error calling shell execute. error code: 5" message and the program terminates.i tried it on a xp machine and also burned a cd but am still getting the error message
I am having great difficulty downloading and installing AVG 2012. Keeps on saying goodbye before installing and i am getting message that says MSI engine failed to install. Can't download. have tried 2 system restore points but still same.
i copied the old hard drive from a lenovo laptop onto a samsung 830 SSDeverything works great except it won't recognize USB when i plug something in (in this case, a USB backup drive).it's strange because i hear that sound like it's in, and the light comes on the USB device, but "my computer" does not show the USB and the backup software does not show the USBwhat i've done so far is go to device manager and check everything under USB, they all say they are working properly.
I just purchased a second Dell M6300 and cloned the hd using Acronis. The cloning is supposed to produce a bootable drive. My problem is that the M6300 I just purchased has a 64 bit processor. After installing the 32 bit cloned hd my 64 bit unit won't boot. I tried using the Windows repair utility but that could not fix the issue. I tried installing Windows 7 32bit software again but it won't allow me to install it without booting to windows as I want to keep the programs and data already on the hd. Any ideas on how to get my cloned 32 bit os to boot on a 64 bit computer?
recently my 1Tb seagate decided that it's S.M.A.R.T. would fail so I went out and bought a 500gb to back up my data using HDClone as I've only used about 390gb on the TB and now I can't get the cloned HDD to boot at first when I booted it the screen would just stay at the flashing underscore which I recognized as an OS issue and I booted it with the recovery disk that did not recognize there was even an OS to fix. I can view all of the files if I use it as a removable disk so I know the clone worked I just can't get it to boot
My new ssd is running great, it feels like a new car.
But I am having trouble with my backups. When I unplug the ssd and try to boot off the hdd (which worked before I installed my ssd) I get boot manager screens.
How can boot off my clones? I'm using Windows 7 and did not change the BIOS except to boot off of CD for the ssd install.
I just cloned my ssd to my external hdd for work. On my external is an 80 gb partition that holds the clone of the ssd, the remainder of the space is a partition called G: When I boot from my ssd I can't access either partition on the external drive, although windows sees both partitions in the disk manager and says that it is in conflict with the data on my ssd. When I boot from the external I am unable to see let alone access the G: partition. I am aiming to be able to access the G: partition both from my ssd and from the ssd clone partition. Just a side note, when I plug the external into my netbook, everything is fine and I can both see and access both partitions.
I have windows 7 x64 installed, and need to copy that partition to another partition on the same drive, and be able to boot between the two using EasyBCD. One will be normal/office stuff, the other will be music production stuff.I copied the partition (C) using Acronis (bootCD mode) no problem, then copied that Acronis clone to the new partition (D). Booted back in to windows and used EasyBCD to add the new partition (D) to the boot menu with a new name.Now when I boot I get the boot choices as expected, but no matter which one I choose, it always boots into the original partition (C)? I've used EasyBCD quite a bit before without problems but this one is driving me nuts.
My problem is I have installed lion in one partition and cloned my windows to other partition. In GPT, Lion booting properly, but clonned system reserved and windows are unable to boot. If if use repair disc, it says not the proper version. ( created from the running windows). I don't have installation disc for windows ( home premium). I want to make the windows bootable.
