Cloned Drive

May 16, 2009

I installed Windows 7 on my D: drive and it was only 80GB, and had everything running to my satisfaction. Started adding a few programs from my Vista install and thought the drive was to small, so cloned the drive unto a backup drive and installed a 1TB drive. Cloned the image back unto the new drive, but when I try to dual boot, it doesn't see Windows 7. I tried booting from the Windows 7 disk, to do a startup repair, but it doesn't see Windows 7 installed on the new drive.

Any ideas?

View 9 Replies


ADVERTISEMENT

System Image Same As Cloned Drive?

Sep 29, 2012

So I have a system image from Windows Backup and Restore. Is it the same thing as a Cloned drive? If not, what differences are there?

View 3 Replies View Related

Windows 7 Cloned Drive Wont Boot?

Feb 16, 2013

I installed Win 7 to a SataIII drive/port with the intention of doing a bootable clone to a SataII drive/port. However on completion of the first install I realised that my cloning software was not capable of cloning the SRP (system reserved partition)Plan B ? Installed a second copy of Win 7 to the SataII drive/port on a single partition (no SRP) with the intention of cloning over the SataIII drive to eliminate the SRPWas hesitant to do this as the clone software wipes the SataIII drive so as a tester I cloned the SataII drive with the single partition to a spare SataII drive and it copied ok. Unfortunately when I disconnected the SataIII and SataII source drive the recently cloned spare SataII drive would not boot. The boot manager prompts the user to accept either of the two installed versions of Win 7 and whichever you nominate the spare SataII drive fails to boot. I installed the Win 7 repair disc to fix the start up but it displayed a message that it was unable to fix it.

View 1 Replies View Related

HDD Went Bad Error Code 0xc0000022 Can't Repair New Cloned Drive?

Sep 16, 2012

The HDD had bad sectors and CHKDSK didn't complete, so I cloned the bad HDD onto a new good one.When I try to login I Explorer appears to crash and I get an the error code: 0xc0000022. I am able to login to safe mode though.Here is what I have tried1.Ran CHKDSK 2. Ran SFC /scannow3. Tried to run Win 7 Ultimate x64 SP1 setup.exe but I get "unknown error has occured" following the repair guide (Repair Install)The last thing I want to do is a new format, though it is looking like that will be my option

View 4 Replies View Related

Make Win7/XP Dual Bootable With Cloned XP Drive?

Nov 25, 2012

Desktop runs Windows 7 (64bit) Laptop runs XP (32 bit)I have programs on my laptop that I want to be able to run on my desktop. Programs that I no longer have install information/CD keys for. I have no trouble making partitions. A 'clean' install of XP onto the partition allows me to dual boot flawlessly using EasyBCD.What i *want* to do is be able to 'clone' my XP drive to the partition to be able to run those programs.

View 3 Replies View Related

Documents And User Files Cloned On Second Drive Issue

Feb 11, 2010

I had been thinking about upgrading to Windows 7 for sometime, and after my Raid array failed I wasn't forced to but it happened to be perfect timing.

Instead of waiting till my replacement drive arrived, I installed Windows 7 on a different drive temporarily.

After I received my new drive, I setup my array again and installed Windows 7 once again without a hitch. After installing all of my programs, games, etc. I started to notice both the User folder and Documents & Settings folders were both identical and were being updated simultaneously.

I know I didn't properly remove the old installation, but I've never seen Windows do this before. Very Odd. I've formatted the other drive and everything is good now, but I thought it was odd and wondered if it was a bug or a known issue.

View 3 Replies View Related

Cloned To SSD Now Laptop Does Not See Usb

Oct 21, 2012

i copied the old hard drive from a lenovo laptop onto a samsung 830 SSDeverything works great except it won't recognize USB when i plug something in (in this case, a USB backup drive).it's strange because i hear that sound like it's in, and the light comes on the USB device, but "my computer" does not show the USB and the backup software does not show the USBwhat i've done so far is go to device manager and check everything under USB, they all say they are working properly.

View 1 Replies View Related

Using Cloned 32 Bit Windows 7 Hd On A 64 Bit System

Jan 3, 2012

I just purchased a second Dell M6300 and cloned the hd using Acronis. The cloning is supposed to produce a bootable drive. My problem is that the M6300 I just purchased has a 64 bit processor. After installing the 32 bit cloned hd my 64 bit unit won't boot. I tried using the Windows repair utility but that could not fix the issue. I tried installing Windows 7 32bit software again but it won't allow me to install it without booting to windows as I want to keep the programs and data already on the hd. Any ideas on how to get my cloned 32 bit os to boot on a 64 bit computer?

View 5 Replies View Related

Unable To Boot Cloned Hdd?

May 3, 2011

recently my 1Tb seagate decided that it's S.M.A.R.T. would fail so I went out and bought a 500gb to back up my data using HDClone as I've only used about 390gb on the TB and now I can't get the cloned HDD to boot at first when I booted it the screen would just stay at the flashing underscore which I recognized as an OS issue and I booted it with the recovery disk that did not recognize there was even an OS to fix. I can view all of the files if I use it as a removable disk so I know the clone worked I just can't get it to boot

View 9 Replies View Related

Cannot Boot To (cloned) Hdd After Ssd Install

Nov 22, 2012

My new ssd is running great, it feels like a new car.

But I am having trouble with my backups. When I unplug the ssd and try to boot off the hdd (which worked before I installed my ssd) I get boot manager screens.

How can boot off my clones? I'm using Windows 7 and did not change the BIOS except to boot off of CD for the ssd install.

View 1 Replies View Related

Cloned Ssd To Partitioned External Now Can't See Partition

Oct 4, 2012

I just cloned my ssd to my external hdd for work. On my external is an 80 gb partition that holds the clone of the ssd, the remainder of the space is a partition called G: When I boot from my ssd I can't access either partition on the external drive, although windows sees both partitions in the disk manager and says that it is in conflict with the data on my ssd. When I boot from the external I am unable to see let alone access the G: partition. I am aiming to be able to access the G: partition both from my ssd and from the ssd clone partition. Just a side note, when I plug the external into my netbook, everything is fine and I can both see and access both partitions.

View 3 Replies View Related

Dual Boot With Cloned Copy

Jan 8, 2011

I have windows 7 x64 installed, and need to copy that partition to another partition on the same drive, and be able to boot between the two using EasyBCD. One will be normal/office stuff, the other will be music production stuff.I copied the partition (C) using Acronis (bootCD mode) no problem, then copied that Acronis clone to the new partition (D). Booted back in to windows and used EasyBCD to add the new partition (D) to the boot menu with a new name.Now when I boot I get the boot choices as expected, but no matter which one I choose, it always boots into the original partition (C)? I've used EasyBCD quite a bit before without problems but this one is driving me nuts.

View 4 Replies View Related

Any Way To Dual Boot On Cloned Windows?

Feb 5, 2012

My problem is I have installed lion in one partition and cloned my windows to other partition. In GPT, Lion booting properly, but clonned system reserved and windows are unable to boot. If if use repair disc, it says not the proper version. ( created from the running windows). I don't have installation disc for windows ( home premium). I want to make the windows bootable.

View 1 Replies View Related

Changing Product Key On Cloned Installation?

Jan 10, 2013

had a hard drive fail on a netbook, and I put in a drive from another of the same brand that had died for other reasons. The new drive took like fish to water - no blue screens, etc. And Windows even updated, as did MSE.

But I'd like to make this machine honest by entering the Windows 7 product key that's associated with the motherboard, so the next owner will never have a problem. Will I have a problem doing that? I don't want to lose what I already have.

View 6 Replies View Related

Reactivate Windows 7 If It Is Cloned To The Same System?

Jun 15, 2011

I just upgraded my XP system to Win 7 home premium 64bit.But after I installed it, I realized that the my HD is pretty old and may go out soon. So I ordered a new HD and it should be here in a few days.I know I can clone my current installation and copy it to the new HD, but will I have to reactivate win 7 if it is cloned to the same system?

View 5 Replies View Related

Using Cloned 32bit Windows 7 Hdd On A 64bit System?

Feb 23, 2012

I just purchased a second Dell M6300 and cloned the hd using Acronis. The cloning is supposed to produce a bootable drive. My problem is that the M6300 I just purchased has a 64 bit processor. After installing the 32 bit cloned hd my 64 bit unit won't boot. I tried using the Windows repair utility but that could not fix the issue. I tried installing Windows 7 32bit software again but it won't allow me to install it without booting to windows as I want to keep the programs and data already on the hd. how to get my cloned 32 bit os to boot on a 64 bit computer?

View 1 Replies View Related

Boot Disk Error With Cloned Windows 7 64 Bit On Ssd?

Dec 23, 2012

I installed my sandisk pulse ssd 256gb sata iii on my sata ii moo via pcie sata iii card. every now and then I get the boot disk error messages - CTRL-AL-DEL to restart . I set it as my primary disk boot and disabled the wd blue from appearing on bios hasrd disk selection (which also has os installed)

I know I don't get sata iii speed on my mobo but am more worried about boot disk error messages.

any fix for this? should I reinstall my win 7 ultimate 64 bit upgrade on the ssd and start afresh? at the same time save all data to external hdd and wipe the OS clean off the wd 500gb - then copy all music and sundry back to the wd blue?

I plan to get windows 8 asap while the upgrade version is on offer till end of January 2013.

after my hardware plan works will a clean install of windows 8 pro upgrade wipe my ssd clean fixing the problem?

View 6 Replies View Related

Clone Hard Drive To 64gb Flash Drive And Restore To Another Hard Drive?

Nov 14, 2012

I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.

View 3 Replies View Related

External Hard Drive - Drive Letter Changed - Unable To Change Back?

Aug 21, 2012

I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.

View 2 Replies View Related

Hard Drive Partition: Adding Free Space Back To C Drive?

Sep 7, 2012

I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.

There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.

View 4 Replies View Related

Windows 7 Doesn't Assign Drive Letter With 2nd Western Dig Elements Drive

Apr 25, 2011

I have Win 7 home premium on an HP laptop with 4 usb ports. I have 2 Western Digital Elements 1.5 TB drives for backups. If I plug in one of the drives, Win assigns a drive letter, but if I add the second one it doesn't.

To troubleshoot, I've plugged each drive into every usb port on the laptop, and each port reads each drive alone, but if I plug in the second drive while the first is still in, it shoes up in devices but does not get a drive letter. I tried assigning a different drive letter to the device plugged in first, but Win still doesn't assign a letter to the second drive.

View 1 Replies View Related

Accidentally Changed Hard Drive With OS To Dynamic Drive.startup Fail?

Sep 23, 2010

My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....

View 8 Replies View Related

Windows 7 Laptop Cannot Access Drive From WinXP Machine Via USB Drive Dock?

Oct 13, 2012

Background: I have a WinXP desktop machine with a hard drive that may have a virus/trojan/rootkit/etc. Normal scans on the WinXP machine with MSE or ThreatFire have not discovered the problem. But the best way to scan a drive is to remove it and treat it as a purely 'dummy' data drive plugged into a usb drive dock and run the scan from a clean machine. This way any infected programs and/or O.S. on the drive will have no control to mask or hide themselves. My other computer is an HP Windows 7 laptop. So I removed the hard drive from the WinXP machine and via the USB drive dock and the Windows 7 laptop saw the WinXP drive icon appear. However, double-clicking that icon results in the popup window message[CODE]

View 4 Replies View Related

Random Floppy Drive Seek And Hard Drive Light Flashing?

Dec 13, 2011

I've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place

View 7 Replies View Related

Hard Drive Partition: Adding Free Space Back To C: Drive

Jan 15, 2013

I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.

I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.

There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.

View 2 Replies View Related

BitLocker Drive Encryption - Suspend Or Resume Protection On Windows 7 Drive

Jan 13, 2012

How to Suspend or Resume BitLocker Protection on Windows 7 Drive ?

View 0 Replies View Related

Internal Flash Reader - No Drive Letters (not A Hide Empty Drive)

Oct 8, 2012

Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.

View 4 Replies View Related

Low Disk Space, Can Transfer Data On D Drive To An External Hard Drive

Nov 13, 2012

Low disk space, Can transfer data on D drive to an external hard drive

View 5 Replies View Related

New Disk Drive - Cloning One Partition Of Multi-part Drive?

Aug 13, 2012

I have a generic System 7 64 bit system with a 1 TB SATA drive. It has one hard drive which I have partitioned into 4 partitions, with C: being where I put all the system software. The board has mulitple SATA ports.Change considered: cloning the C: partition onto a new SSD so that I can get the performance boost of an SSD. There are some heat problems with existing hard drive so I probably need to change it out, so I would also like to clone the D:, E:, and F: partitions to a new hard drive.I have cloned a single physical drive to another physical drive, and the software (Ghost, or the like) usually handles it ok, so that all I need to do is adjust some partition sizes, and then disconnect the old hard drive and everyting is good. This includes cloning a single hard drive with multiple partitions to being cloned to a new single hard drive with identical numbers of partitions.Compared to my prior experience, is there something different about cloning one partition only vs cloning the whole drive. My proposed plan is:

1) Install SSD
2) clone C: to SSD only
3) clone D: E: F: of old drive to new drive.
4) remove old drive.

View 5 Replies View Related

One Drive Appears To Have Duplicated Itself By Populating Any Drive Letter Thats Free?

Oct 12, 2012

One drive appears to have duplicated itself by populating any drive letter thats free! Tried simply deleting the ones not needed but they reappear?

View 1 Replies View Related

Windows 7 Bit-locker Drive Encryption Leading Drive Format In XP

Feb 14, 2010

I have two hard disks-500GB and 80GB,so installed win 7 on 500GB HDD and 80GB was kept as slave.And i locked a drive present in 80GB using Bitlocker.Since week when i use win 7 ,after 20 min the display screen turned to black screen.So installed XP on 80GB drive.Now when i try to open the drive which i locked using Bitlocker is asking for format,that drive has important information.How can i retrieve the data from that drive?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved