ERROR CODE 0x81000019 Hard Drive Backup + BEEPING NOISE?
Jan 7, 2013
I am getting a beeping sound noise from the top right corner of my vaio laptop. The problem seems to be one my hardware drivers, to make matters worse i cant even back up i just get the error code in the title! I have checked my "system reserved space" which is at 100mb so i have enough memory to back it up. I also had drivers problems with my laptop when trying to establish wifi connection after moving house, "missing driver" i now use a cable.
View 1 Replies
ADVERTISEMENT
Dec 14, 2012
I am using a Dell Inspiron 14 laptop. A few days ago, I noticed that my laptop has become incredibly slow (the system will hang sometimes, and continue as per normal after a while), and this coincided with my laptop beginning to make this weird, sharp beeping sound. At first I did not pay much attention to it, but later this was joined by several BSODs, and my laptop became even slower (games that usually did not lag was now hanging halfway through, and continuing as per normal after a lengthy period of 1 minute or so). I tried to find the origin of the noise, and I think it came from my Internal hard drive sector, and thus decided to open the sector up (in hindsight I probably should not have). After I replaced it, without doing much (just doing the usual IT-amateur stuff, wiping it and blowing it a few times), my situation has now worsened to the point that startup takes a much longer time, and finally now it hangs at the "Starting Windows" screen, but without the Windows 7 logo showing, and my screen later turns black.
View 9 Replies
View Related
Oct 17, 2011
i have an acer aspire 5738z and i am using windows 7 ultimate. every time i boot it up it works fine until i start getting onto internet. when i am using internet say, streaming videos on Internet or playing an online game or watching a movie online, the laptop just freezes. sometimes it freezes for like 2 secs but sometimes over 10 minutes. and then sometimes it comes back on again as normal or i will have to manually restart it from my end. i also tried to find any faults using a registry checker and couldnt find any although i am not pretty sure which is the best registry cleaner to be used. i also find that sometimes the laptop beeps just once before it unfreezes.
View 1 Replies
View Related
Oct 6, 2010
i get a beeping noise now and again when playing games, its just one beep but its done it on desktop a couple of times aswell, as anyone got any ideas and how to stop it.
View 7 Replies
View Related
Oct 15, 2011
I just got a new laptop DELL Inspiron 15R N5110 (i3 processor, 3GB ram, 500 GB hard disk) 2 days back. Suddenly the system started lagging and it hanged last day. When I tried 2 restart, it said there is an error in loading d hard disk. It asked me 2 boot several times. The laptop now have started making clicking noises. Its now even getting heated up also. I ain't able to restart it now. I've my documents saved on d laptop in a separate drive. (I had partitioned d drive as C and D where D is for my personal data). I m very much concerened about the data which is present in d laptop now. Will I be able 2 retrieve it back??? How should I repair it?
View 3 Replies
View Related
Feb 26, 2012
I have 2x160gb intel SSD disks running as RAID0. Recently my motherboard had failed and I replaced it with new one (different model). Couldn't access OS because apparently some RAID data is kept on the motherboard and that was gone, so I decided to use a backup. Booted from windows 7 installation disk and selected backup,
I click on 'repair', get to the 'select a system image backup'. Select 'use the latest available system image (recommended). Click 'next' I get the message 'all disk to be restored will be formatted and replaced with the layout and data in the system image'. Click Yes. But then got an error saying:
"The system image restore failed. The disk that is set as active in BIOS is too small to recover the original system disk. Replace the disk with a larger one and retry the restore operation. (0x80042407)"
Disk is completely empty with only 1 partition (deleted all partitions and reformatted and then created one). Before motherboard problem I had several partitions, but I imagine that restore would recreate them. Why do I get 'disk to small error' when I am restoring on the same disk? RAID configuration problem? Could stripe size be an issue here?
My OS: Windows 7 64 Professional
View 1 Replies
View Related
Jul 9, 2009
I've had an issue with hard drive noise before but after I installed windows seven it's seem to get worse is there anyway I can make the hard drive less loud because it's driving me crazy..
It's a compaq presario CQ60 the hard drive is a samsung
this laptop is new but it seems to get worse I returned this laptop before and got another same one with the same issue..
View 5 Replies
View Related
May 23, 2011
. I have 2 of them, one is a Western Digital Caviar Blue, about 2 years old I think. The second is a Western Digital as well, but I'm unsure of the type and age, it's a 150GB drive. One of these drives are making an odd noise, I suspect it's the main drive, the 500GB Caviar Blue. Reason being is because after starting up my system and selecting either Windows 7 or Windows XP it does a Disk Check before going to the Welcome screen, it does not do the Disk Check every time, but it happens quite often. Disk Check of course displays no issues upon completing. The thing I notice that happens, but not very often, it's about a 1 second kind of low screech noise coming from my computer tower. It is making me worried of my computer health and how much longer is might live.
View 7 Replies
View Related
Jul 23, 2011
Just got a Sager NP1830 laptop with 7 on it. Is it normal for my hard drive indicator to blink like every second?
I also hear pretty audible hard drive activity noise even when the computer is doing nothing. I just switched from a Mac so I'm not sure if this is normal.
View 9 Replies
View Related
Nov 6, 2011
Recently my 1tb hard-drive has starting making these low pitched grumbling noises almost like a vibration when its being accessed. I notice it most when I am defragmenting or gaming. It does not happen when I defragment my other hard drive.
View 3 Replies
View Related
Feb 2, 2011
A couple of weeks ago I did something stupid and lost all my data from my hard drive on my old XP computer. Having now bought a new machine and restored as many files as I can, I have purchased a Seagate Expansion 1TB external drive on which to backup my files (Once bitten, twice shy,)I'm now using Windows 7 Home Premium 64-bit with a 500GB hard drive (not much on it at the moment) but when I tried to do my first backup today using the Windows 7 utility the backup aborted at less than half complete giving me the error message: 0x81000033 "Windows Backup skipped backing up system image because one of the critical volumes is not having enough free space. Free up some space by deleting unnecessary files and try again."I've searched on the Net and found that this is by no means an isolated problem and probably involves a partition (whatever that means) that is too small. MS want to charge a fee for assistance as my Windows 7 was purchased with the computer. All the other so called 'fixes' are so way over my head that I a) don't understand what they are talking about and b) simply don't have the confidence to try them without an idiot's step-by-step guide in front of me.I know it's a bit long winded but my question is, does anyone know of a SIMPLE way to back up my files or have I just wasted my money on an external drive that I cannot use?
View 1 Replies
View Related
Oct 22, 2012
I have an HP tx2627cl table notebook (swivel screen), Win 7 Home prem OS, 4GB ram and a Seagate ext HD (75GB free of 279GB) which will not allow me to backup. I get error message 0x8007045D because of "an i/o device error". I can copy files to that external HD (I, but can't use Windows Backup. I did a check disk of I:/ and got no errors. When I click on Backup to I:/, it starts, says it is creating a shadow copy, runs for a couple of minutes (about 5-6%) then I get the above error message. I have switched USP ports, and tried doing a backup from a "clean boot state" with the recommended settings--all to no avail.
View 3 Replies
View Related
Jun 9, 2009
The Action Center on my setup keeps reminding me of this:
Anyone else received this?
The funny thing is, I have more than enough space. I have 120 gigs free, with an 81 gig backup.
View 3 Replies
View Related
Jun 12, 2010
I get a message that says " Windows skipped backing up system image because one of the critical volumes is not having enough free space. Free up some space by deleting unnecessary files and try again."I am trying to back up to a external HD with 163 GB free out of 232 GB. I have been to windows answers and they have nothing but suggestions that are way over my head. Each moderator has a different solution, it appears that MS is aware of this problem but does not have a cure. How is one supposed to create a backup and restore.
View 3 Replies
View Related
Dec 28, 2012
I have a 3 year old Alienware desktop running Win 7 Professional. I have never had any major problem including running weekly backups to a second internal hard drive using Windows backup. About 3 weeks ago the backup failed and produced the mentioned error code. The description of the error is misleading and makes you think that you have insufficient room on your backup drive. I subsequently replaced the drive with a larger one but the problem persisted. I then researched (including here) the error code and found "solutions" that were all over the map including some frankly worthless responses. The most frequently described cause is attributed to lack of space in a 100 MB "system reserved" partition on the boot drive. When I checked my drive this partition was not present. I had an OS partition, a Recovery partition, and a 16 MB unlabeled partition. I thought that perhaps the 16 MB partition was supposed to be the 100 MB partition and, because it was too small, was causing the backup problem. I then took my computer to Data Doctors.
View 4 Replies
View Related
Dec 29, 2012
I have a 3 year old Alienware desktop running Win 7 Professional (see my profile for more computer specs). I have never had any major problem including running weekly backups to a second internal hard drive using Windows backup. About 3 weeks ago the backup failed and produced the mentioned error code. The description of the error is misleading and makes you think that you have insufficient room on your backup drive. I subsequently replaced the drive with a larger one but the problem persisted. I then researched (including here) the error code and found "solutions" that were all over the map including some frankly worthless responses. The most frequently described cause is attributed to lack of space in a 100 MB "system reserved" partition on the boot drive. When I checked my drive this partition was not present. I had an OS partition, a Recovery partition, and a 16 MB unlabeled partition. I thought that perhaps the 16 MB partition was supposed to be the 100 MB partition and, because it was too small, was causing the backup problem.
View 2 Replies
View Related
Oct 5, 2011
I cannot back up my computer on either of two external hard drives. In both cases I get an error code 0x81000031. I use windows 7, 32-bit and do not think I have Bitlocker on my machine.
View 2 Replies
View Related
Jul 10, 2009
Ok, I've been researching solutions for issues with windows 7 backup for weeks now and have had no luck. My VSS service is running fine, and everything was backing up fine til a short while ago, and has been failing since. I have been backing up to a network share on my file server.
My roommate has been having the same issue for some time now, however he was attempting to do this with an external hard drive. Same error of 0x8100019. I've tried everything I can think of and I've had no leads thus far. Any pointers on this would be helpful.
View 0 Replies
View Related
Aug 7, 2009
3 PC's all running Windows 7 Ultimate
1 Desktop connection via wire to router
2 Laptops connected via Wireless (Linksys wrg54g)
All 3 PC's are visible on all 3 PC's via the Homegroup in Windows Explorer. I can browse/copy/write files on all 3. All sweet. All 3 can print to the 2 Printers connected to the Desktop.
Laptop A is configured to Backup using the Windows 7 Backup to the Desktop. This works fine.
Laptop B however when trying to backup to the desktop I get an error message after I have selected the Drive in the setup screen and I've entered my username/password credentials
The error code is 0x80070043
I've tried everything and I'm quite experienced.
Both laptops for all intents and purposes are identical.
View 9 Replies
View Related
Jan 31, 2011
7 Ultimate on a Lenovo computer, 8 mb RAM, Q8200 CPU. Recently I started getting notifications that my backup failed because the system cannot find the file specified, and the above error code. I'm not specifying any files, and I've reset backup to its default settings, all to no avail. I'm backing up to an external USB hard drive. In fact I bought a new one because I thought the old one was too small
View 3 Replies
View Related
Jan 20, 2012
I have been trying to do a backup with system image since Jan 15th on an Iomega 1TB external HD. Tried about 7 times and each time the backup fails at 57%. The message I receive with each failure is as follows- "Windows backup encountered an error when accessing the remote shared file. The semaphore timeout period has expired. Details: Error code 0x81000039" I chatted with a tech from my external HD manufacturer and he finally told me that the problem was with my OS and settings. I tried doing a backup on a different external HD and still failed at 57%. I have no idea which remote shared file the program is looking for. I have a home network and one other computer. That laptop was turned on so if it was looking for a file there it was available. The tech suggested that I turn off my antivirus and firewall and if I was concerned about intrusion to disconnect from the internet. Did that and the backup still failed. I have the same setup on desktop and laptop Windows 7 SP!, Vipre antivirus and firewall, and I was able to do a backup on my laptop. Another slight problem is when I have the Iomega HD running my computer will freeze randomly. For this reason I don't keep it on all the time but just turn on for a monthly backup. I was able to do one initial backup on that HD with no problem. I was told to look at the windows backup log files but they all have a .etl extension and I do not know how to open them to see if the logs give me any idea what file it is hanging up on.
View 7 Replies
View Related
Mar 19, 2011
win7 Backup aborts with error code 0x80070422
View 4 Replies
View Related
Feb 4, 2013
Windows backup gets to 57% and fails with "Windows Backup failed while trying to read from the shadow copy on one of the volumes being backed up. Please check in the event logs for any relevant errors. (0x81000037)."
View 9 Replies
View Related
Oct 1, 2009
At present I use Vista and will be upgrading to Windows 7 o/a 22 Oct.
My total C & D drives use 110 GB so I would like to puchase something in that area and
it would only be used for emergency backup. I have looked at several but I noticed that
all of them only function with XP & Vista and no mention of Windows 7.
I would appreciate a recommendation that will function with Windows 7.
View 2 Replies
View Related
Oct 1, 2012
I'm trying to backup my data on my laptop to an external hard drive. Windows isn't recognizing it for some reason.
The laptop is an HP running windows 7 and the hard drive is an Eagle Cansus. Using the windows commands in the control panel don't seem to help.
View 3 Replies
View Related
Oct 10, 2012
I have been using a commercial company to back up my computer for the last 2 years. Now I have decided to do my own backups. I already did the first back up to the external drive. Now its time to back up again, when I back up again, will everything be backed up again? Or just the files that have changed?
View 1 Replies
View Related
Sep 1, 2009
Acronis True Image Home 2009
There are manufacturer specific free versions for downloadWestern Digital Edition
Maxtor MaxBlast 5
Seagate DiscWizard
Other Manufacturers may have free versions of Acronis Imaging that I am not aware of.
View 5 Replies
View Related
Oct 10, 2010
I recently had much trouble with my computer and was reinstalling OS many times! XP and windows 7. When I was installing windows 7 there were 3 virtual drives one about 400 mb named windows reserved and 2 others each (300gb) the 3d one was backup. I formatted first 2 deleted partitions, made 1 partition formatted again and then installed windows. The 3d virtual hard drive backup disappeared with all my stuff. Now I just have Local disc C: which is 300 gb and nothing else. So I am missing 300gb virtual hard drive with my stuff, where did it go?
Computer is Inter (R) Core(TM) i3 CPU 530@2.93GHz
MSI Motherboard H55M-E33
Hard drive WDC WD6400AAKS-00E4A0 ATA Device
View 1 Replies
View Related
Jan 19, 2012
I am running "windows backup and restore" on one of my external hard drives and WDsmartware (western digital software that came with my other external drive). WDsmartware eats up WAY to much resources. Would I be better off just using "windows backup and restore" for both drives? are there any free programs out there that are "better' than windows 7 "backup and restore"?
View 5 Replies
View Related
Dec 21, 2012
I'd like to automatically backup certain folders to an external hard drive every time it's plugged in. I've tried Windows 7 Backup tool but it creates an icon and I would like the folder to be able to be navigatable (for the reason that I need to know what has been backed up and what hasn't, also I don't want to restore an entire folder at times, sometimes I just want to restore a couple of files).
How can I make this happen? Using either Windows 7 backup or another tool
View 2 Replies
View Related
Oct 9, 2009
I'm trying to set up the Backup to an internal hard drive called Z: After originally installing win 7 64bit, I had to manually assign a drive letter to the hd before windows would see it. This HD has nothing on it and is not used often so its perfect for my windows backup. However, when I start the backup setup - it does not list that hard drive in my options to backup to. When I manually goto CMD to run "wbadmin start backup -backuptarget:f: -include:c:" it gives me the error saying the HD is read-only and cannot store backups.
Under disk management, I am not allowed to reformat the z: drive - it says "Windows cannot format the system partition on this disk." It lists the Z: drive as being system, active, primary partition - WHY DOES WINDOWS THINK IT IS THE SYSTEM HD? It has 100% free space according to diskmanagement.
I ran a chkdsk on z: (it is still going on step 5) and there doesn't seem to be any errors yet :/ Any suggestions?
View 0 Replies
View Related
