Windows 7 Backup Fails With Error Code: 0x80070002?
Jan 31, 2011
7 Ultimate on a Lenovo computer, 8 mb RAM, Q8200 CPU. Recently I started getting notifications that my backup failed because the system cannot find the file specified, and the above error code. I'm not specifying any files, and I've reset backup to its default settings, all to no avail. I'm backing up to an external USB hard drive. In fact I bought a new one because I thought the old one was too small
View 3 Replies
ADVERTISEMENT
Jul 10, 2009
Ok, I've been researching solutions for issues with windows 7 backup for weeks now and have had no luck. My VSS service is running fine, and everything was backing up fine til a short while ago, and has been failing since. I have been backing up to a network share on my file server.
My roommate has been having the same issue for some time now, however he was attempting to do this with an external hard drive. Same error of 0x8100019. I've tried everything I can think of and I've had no leads thus far. Any pointers on this would be helpful.
View 0 Replies
View Related
Oct 2, 2012
How do I correct the problem. notebook has never completed the backup?
View 1 Replies
View Related
Aug 6, 2011
So I have been wanting to fix this issue for a while. I want to have a fresh backup file on my computer to use incase anything ever goes wrong and I have to revert to a earlier time. My last backup was back in December and has stopped working since then. I have done a lot to this computer and If I ever have to do a system restore that's the only backup point I could revert to and that's bad. I would loose A LOT of stuff on my PC. Okay so every time I try and run the backup or when it runs on its own I get this error message: The system can not find the file specified. With error code 0x80070002 at the bottom of more information. I'm using a 1TB USB External HDD. Brand is Green Drive. My PC is an HP and is using a motherboard that they shipped it with. This is my motherboard just incase anyone wants to see, because I read this might be a USB chip set issue. [URL] I'm using Windows 7 x64bit.
View 5 Replies
View Related
Jul 22, 2012
So I tried creating a backup.I can launch the backup wizard, select the drive I want to save the backup on, then I select "Let Windows decide" (I also tried selecting let me choose and selecting different folders, no difference), after that I get the "overview" but when I click on "Save settings and run backup". That's where the popup error appears saying "The System cannot find the file specified. (0x8007002)"Clicking OK just closes the popup and the wizard.
View 1 Replies
View Related
Dec 6, 2011
During belkin uninstall get error code: -5005 : 0x80070002 windows 7
View 1 Replies
View Related
Oct 24, 2009
I'm having probleam installing the is UG version of Windows 7 Pro for students. I followed the directions here, and converted the iso into usb bootable disk, and everytime i run the disk it keeps getting me an error.
"Windows was unable to locate required installation file [boot.wim]. Verify that the installation source is valid. and restart the installation."
Error code: 0x80070002
I am trying to do a dual boot, keeping my current xp into Asus eee box b202.
Am I missing something here?
View 2 Replies
View Related
Jul 26, 2012
After my computer got a virus, I decided to perform a clean install. In the middle of installing, it says, "The file does not exist. Makes sure all files required for
installation are available , and restart Error code:0x80070002".
View 9 Replies
View Related
Jul 6, 2012
while I try the troubleshooting wizard in my computer, I receive the message which says that it can not continue due to the error code 0x80070002. this is because I want to reactivate a software called epiinfo7 which has stopped working. so how this error code can be removed?
View 1 Replies
View Related
Mar 7, 2010
When attempting to backup a system image and/or selected libraries or files on an OEM installation of Windows 7 Home Premium 64-bit, I am receiving an error message. The initial pop-up states: The Last Backup Did Not Complete Successfully When I click on the pop-up to check the backup and select �More Details,� I see the following message. The System cannot find the file specified Error Code: 0x80070002 No additional information is provided. (And no clue is provided regarding what �file� is not found.) While I am attempting to backup to an external hard drive connected via eSATA, this error also occurs when I attempt a backup to either an external USB drive or a DVD.
I have attempted to run various backup scenarios wherein [a] Windows selects what to backup, [b] I choose a system image only, [c] I choose libraries only, or [d] I choose a very small data directory in a directory outside of the libraries. The error is always the same. When the system image is included, the backup does run for a time before the error message occurs � and a significant amount of data is written to the drive. When I run a file-only backup, the error is almost instantaneous. So far, in attempting to resolve the problem I have taken the following steps (although not necessarily in this order): Confirmed the registry profiles image paths are accordance with the information found at: The Storage Team at Microsoft - File Cabinet Blog : Common causes and solutions to Backup, System Restore, and Complete PC Backup problems - updated!. Everything was correct, no problems found. Ran the system file checker (sfc /scannow) with no errors reported. Scanned all hard drives (chkdsk x: /r) Confirmed that VSS and Windows Backup Services are running via services.msc Although I didn�t think it applied, I tested the Hotfix suggested at: You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM. No success. Reviewed the information at Error code 0x80070002 when you back up files in Windows 7 however the scenarios did not apply and therefore the solutions were not available to me. Checked the error logs at C:WindowsLogsWindowsBackup, but the error log is empty . Ran a Clean Boot via msconfig.exe Attempted to run Backup in Safe Mode, but of course Backup & Restore cannot be run in safe mode, even if I try to start the services manually (Error 1084). Reset Backup Files Configuration, using instructions at: Backup User and System Files - Reset to Default Configuration I am extraordinarily frustrated. This is a new computer, and an almost new installation of Windows. I have obviously missed something, but don�t know what it is. I am desperate for a solution.
View 9 Replies
View Related
May 7, 2012
I have tried to install this update six times today (07/05/12) after it was flagged as an important update this morning. Looking at my update history it also failed to instal on the 18th October last year but it has not bothered me since and i have not noticed it until now. Of the seven attempts I had the following error codes from earliest to latest : 800B0100, 80246007, 80010108, 8024200D, 8024200D, 8024200D, 8024200D. I have followed advice from MS running KB947821 and FIX IT also disabled my Norton 360 firewalls and auto protect but to no avail. Also I do not have a DVD with Windows 7 as it was not supplied with my PC and I don't want to restore my computer and lose all my installed software.
View 3 Replies
View Related
Sep 1, 2012
I have a lop top with Windows 7 64 bit OS. Of lately, Windows update keeps failing to install some software updates. Here are the details of the s/w that would not install[CODE]
View 2 Replies
View Related
Nov 16, 2009
Just installed 64-bit Win 7. Everything works well except backup fails. The error is "Away Mode". Unlike Vista, not way to turn Away Mode off.
Suggestions? 3rd party utility? Trick? MSI board in HP desktop - now way to get to BIOS to turn off.
View 4 Replies
View Related
Dec 4, 2009
My Windows Updates fails Error Code :WindowsUpdate_80070652
Definition Update for Windows Defender - KB915597 (Definition 1.71.471.0)
Any thoughts ??
View 5 Replies
View Related
Oct 27, 2009
upgrade my system from Windows XP Pro SP3. The setup starts and gets past creating a user account, setting a computer name etc and then restarts and looks like Windows 7 is going to startup and then I get a BLUE SCREEN OF DEATH with:
STOP: C000021a [Fatal System Error}
The intial session process or system process terminated unexpectedly with a status of 0x00000000 (0xC0000001 0x00100400)
It then mentions about dumping the memory out to disk and reboots. If i press F8 and attempt to boot SAFE MODE I get a requester saying that setup cannot be completed in Safe Mode. If try the startup recovery the first time it says it fixed a problem and wants to restart again but it has fixed nothing. Next time the startup recovery just runs and doesn't appear to finish.
I have run the Windows Memeory Diagnostic within the setup and memory checks out fine. I initially thought the onboad audio chipset was the issue and disabled that but it made no difference. I did get one successful installation but it eventually crashed and burned with the same error after approximately 12 hours.
View 9 Replies
View Related
Jun 12, 2010
I get a message that says " Windows skipped backing up system image because one of the critical volumes is not having enough free space. Free up some space by deleting unnecessary files and try again."I am trying to back up to a external HD with 163 GB free out of 232 GB. I have been to windows answers and they have nothing but suggestions that are way over my head. Each moderator has a different solution, it appears that MS is aware of this problem but does not have a cure. How is one supposed to create a backup and restore.
View 3 Replies
View Related
Dec 28, 2012
I have a 3 year old Alienware desktop running Win 7 Professional. I have never had any major problem including running weekly backups to a second internal hard drive using Windows backup. About 3 weeks ago the backup failed and produced the mentioned error code. The description of the error is misleading and makes you think that you have insufficient room on your backup drive. I subsequently replaced the drive with a larger one but the problem persisted. I then researched (including here) the error code and found "solutions" that were all over the map including some frankly worthless responses. The most frequently described cause is attributed to lack of space in a 100 MB "system reserved" partition on the boot drive. When I checked my drive this partition was not present. I had an OS partition, a Recovery partition, and a 16 MB unlabeled partition. I thought that perhaps the 16 MB partition was supposed to be the 100 MB partition and, because it was too small, was causing the backup problem. I then took my computer to Data Doctors.
View 4 Replies
View Related
Dec 29, 2012
I have a 3 year old Alienware desktop running Win 7 Professional (see my profile for more computer specs). I have never had any major problem including running weekly backups to a second internal hard drive using Windows backup. About 3 weeks ago the backup failed and produced the mentioned error code. The description of the error is misleading and makes you think that you have insufficient room on your backup drive. I subsequently replaced the drive with a larger one but the problem persisted. I then researched (including here) the error code and found "solutions" that were all over the map including some frankly worthless responses. The most frequently described cause is attributed to lack of space in a 100 MB "system reserved" partition on the boot drive. When I checked my drive this partition was not present. I had an OS partition, a Recovery partition, and a 16 MB unlabeled partition. I thought that perhaps the 16 MB partition was supposed to be the 100 MB partition and, because it was too small, was causing the backup problem.
View 2 Replies
View Related
Mar 19, 2011
win7 Backup aborts with error code 0x80070422
View 4 Replies
View Related
Feb 4, 2013
Windows backup gets to 57% and fails with "Windows Backup failed while trying to read from the shadow copy on one of the volumes being backed up. Please check in the event logs for any relevant errors. (0x81000037)."
View 9 Replies
View Related
Jan 15, 2013
I have had many failed attempts at backingup my pc and keep getting the following error message"Backup encountered a problem while backing up file C:UsersSeanDesktop2013-01 (Jan). Error The system cannot find the file specified. (0x80070002))"
View 4 Replies
View Related
Feb 2, 2011
A couple of weeks ago I did something stupid and lost all my data from my hard drive on my old XP computer. Having now bought a new machine and restored as many files as I can, I have purchased a Seagate Expansion 1TB external drive on which to backup my files (Once bitten, twice shy,)I'm now using Windows 7 Home Premium 64-bit with a 500GB hard drive (not much on it at the moment) but when I tried to do my first backup today using the Windows 7 utility the backup aborted at less than half complete giving me the error message: 0x81000033 "Windows Backup skipped backing up system image because one of the critical volumes is not having enough free space. Free up some space by deleting unnecessary files and try again."I've searched on the Net and found that this is by no means an isolated problem and probably involves a partition (whatever that means) that is too small. MS want to charge a fee for assistance as my Windows 7 was purchased with the computer. All the other so called 'fixes' are so way over my head that I a) don't understand what they are talking about and b) simply don't have the confidence to try them without an idiot's step-by-step guide in front of me.I know it's a bit long winded but my question is, does anyone know of a SIMPLE way to back up my files or have I just wasted my money on an external drive that I cannot use?
View 1 Replies
View Related
Oct 22, 2012
I have an HP tx2627cl table notebook (swivel screen), Win 7 Home prem OS, 4GB ram and a Seagate ext HD (75GB free of 279GB) which will not allow me to backup. I get error message 0x8007045D because of "an i/o device error". I can copy files to that external HD (I, but can't use Windows Backup. I did a check disk of I:/ and got no errors. When I click on Backup to I:/, it starts, says it is creating a shadow copy, runs for a couple of minutes (about 5-6%) then I get the above error message. I have switched USP ports, and tried doing a backup from a "clean boot state" with the recommended settings--all to no avail.
View 3 Replies
View Related
Jun 9, 2009
The Action Center on my setup keeps reminding me of this:
Anyone else received this?
The funny thing is, I have more than enough space. I have 120 gigs free, with an 81 gig backup.
View 3 Replies
View Related
Oct 5, 2011
I cannot back up my computer on either of two external hard drives. In both cases I get an error code 0x81000031. I use windows 7, 32-bit and do not think I have Bitlocker on my machine.
View 2 Replies
View Related
Aug 7, 2009
3 PC's all running Windows 7 Ultimate
1 Desktop connection via wire to router
2 Laptops connected via Wireless (Linksys wrg54g)
All 3 PC's are visible on all 3 PC's via the Homegroup in Windows Explorer. I can browse/copy/write files on all 3. All sweet. All 3 can print to the 2 Printers connected to the Desktop.
Laptop A is configured to Backup using the Windows 7 Backup to the Desktop. This works fine.
Laptop B however when trying to backup to the desktop I get an error message after I have selected the Drive in the setup screen and I've entered my username/password credentials
The error code is 0x80070043
I've tried everything and I'm quite experienced.
Both laptops for all intents and purposes are identical.
View 9 Replies
View Related
Jan 20, 2012
I have been trying to do a backup with system image since Jan 15th on an Iomega 1TB external HD. Tried about 7 times and each time the backup fails at 57%. The message I receive with each failure is as follows- "Windows backup encountered an error when accessing the remote shared file. The semaphore timeout period has expired. Details: Error code 0x81000039" I chatted with a tech from my external HD manufacturer and he finally told me that the problem was with my OS and settings. I tried doing a backup on a different external HD and still failed at 57%. I have no idea which remote shared file the program is looking for. I have a home network and one other computer. That laptop was turned on so if it was looking for a file there it was available. The tech suggested that I turn off my antivirus and firewall and if I was concerned about intrusion to disconnect from the internet. Did that and the backup still failed. I have the same setup on desktop and laptop Windows 7 SP!, Vipre antivirus and firewall, and I was able to do a backup on my laptop. Another slight problem is when I have the Iomega HD running my computer will freeze randomly. For this reason I don't keep it on all the time but just turn on for a monthly backup. I was able to do one initial backup on that HD with no problem. I was told to look at the windows backup log files but they all have a .etl extension and I do not know how to open them to see if the logs give me any idea what file it is hanging up on.
View 7 Replies
View Related
Jan 7, 2013
I am getting a beeping sound noise from the top right corner of my vaio laptop. The problem seems to be one my hardware drivers, to make matters worse i cant even back up i just get the error code in the title! I have checked my "system reserved space" which is at 100mb so i have enough memory to back it up. I also had drivers problems with my laptop when trying to establish wifi connection after moving house, "missing driver" i now use a cable.
View 1 Replies
View Related
Jun 15, 2012
Critical updates were installed for my Windows 7 Ultimate 32-bit desktop yesterday, today I put the computer on and just after the Windows loading screen I receive a Bluescreen for a millisecond before computer immediately restarts. I am them prompted to do a repair when computer restarts which after many minutes brings up the error message 0x80070002. The computer is a self build and has been fine for 3 years but this appears to be a major problem. I cannot afford to lose my files (most are backed up but not all since I only back up every month to an external drive). From the repair screen, I have tried to restore the computer before critical updates were installed (what I feel is causing the problem) but the restore point fails. I cannot enter the desktop and now the startup repair simply hangs.
View 1 Replies
View Related
Jul 12, 2012
Last night before I went to bed there was a Windows update, and this morning when I turned the pc on, it just went to this screen saying that something was wrong and i needed to repair. I clicked the repair box, but it didn't wanna do that. So I went into the system recovery tool to go back to (the only restore point) which is yesterday, but when I try and do that, it says "Details: An unspecified error occurred during System Restore. (0x80070002)
I don't know alot about computers, and I'm currently writing this on my laptop, since I can't enter my computer in any way
View 1 Replies
View Related
Mar 12, 2011
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
View 1 Replies
View Related