Error Code: 0x80070002 Windows 7
Oct 2, 2012How do I correct the problem. notebook has never completed the backup?
View 1 Replies
ADVERTISEMENT
Windows 7 Backup Fails With Error Code: 0x80070002?
Jan 31, 20117 Ultimate on a Lenovo computer, 8 mb RAM, Q8200 CPU. Recently I started getting notifications that my backup failed because the system cannot find the file specified, and the above error code. I'm not specifying any files, and I've reset backup to its default settings, all to no avail. I'm backing up to an external USB hard drive. In fact I bought a new one because I thought the old one was too small
View 3 Replies View RelatedDuring Belkin Uninstall Get Error Code: -5005 : 0x80070002 Windows 7
Dec 6, 2011During belkin uninstall get error code: -5005 : 0x80070002 windows 7
View 1 Replies View RelatedInstall Error Code: 0x80070002
Oct 24, 2009I'm having probleam installing the is UG version of Windows 7 Pro for students. I followed the directions here, and converted the iso into usb bootable disk, and everytime i run the disk it keeps getting me an error.
"Windows was unable to locate required installation file [boot.wim]. Verify that the installation source is valid. and restart the installation."
Error code: 0x80070002
I am trying to do a dual boot, keeping my current xp into Asus eee box b202.
Am I missing something here?
Error Code 0x80070002 When Clean Installing?
Jul 26, 2012After my computer got a virus, I decided to perform a clean install. In the middle of installing, it says, "The file does not exist. Makes sure all files required for
installation are available , and restart Error code:0x80070002".
Remove The Error Code 0x80070002 From Laptop?
Jul 6, 2012while I try the troubleshooting wizard in my computer, I receive the message which says that it can not continue due to the error code 0x80070002. this is because I want to reactivate a software called epiinfo7 which has stopped working. so how this error code can be removed?
View 1 Replies View RelatedWindows 7U Cannot Boot Due To 0x80070002 Error?
Jun 15, 2012Critical updates were installed for my Windows 7 Ultimate 32-bit desktop yesterday, today I put the computer on and just after the Windows loading screen I receive a Bluescreen for a millisecond before computer immediately restarts. I am them prompted to do a repair when computer restarts which after many minutes brings up the error message 0x80070002. The computer is a self build and has been fine for 3 years but this appears to be a major problem. I cannot afford to lose my files (most are backed up but not all since I only back up every month to an external drive). From the repair screen, I have tried to restore the computer before critical updates were installed (what I feel is causing the problem) but the restore point fails. I cannot enter the desktop and now the startup repair simply hangs.
View 1 Replies View RelatedWindows 7 Backup Error 0x80070002
Aug 6, 2011So I have been wanting to fix this issue for a while. I want to have a fresh backup file on my computer to use incase anything ever goes wrong and I have to revert to a earlier time. My last backup was back in December and has stopped working since then. I have done a lot to this computer and If I ever have to do a system restore that's the only backup point I could revert to and that's bad. I would loose A LOT of stuff on my PC. Okay so every time I try and run the backup or when it runs on its own I get this error message: The system can not find the file specified. With error code 0x80070002 at the bottom of more information. I'm using a 1TB USB External HDD. Brand is Green Drive. My PC is an HP and is using a motherboard that they shipped it with. This is my motherboard just incase anyone wants to see, because I read this might be a USB chip set issue. [URL] I'm using Windows 7 x64bit.
View 5 Replies View RelatedWindows Backup Error 0x80070002 At End Of Wizard
Jul 22, 2012So I tried creating a backup.I can launch the backup wizard, select the drive I want to save the backup on, then I select "Let Windows decide" (I also tried selecting let me choose and selecting different folders, no difference), after that I get the "overview" but when I click on "Save settings and run backup". That's where the popup error appears saying "The System cannot find the file specified. (0x8007002)"Clicking OK just closes the popup and the wizard.
View 1 Replies View RelatedWindows 7 Won't Repair Or Start - Error# 0x80070002
Jul 12, 2012Last night before I went to bed there was a Windows update, and this morning when I turned the pc on, it just went to this screen saying that something was wrong and i needed to repair. I clicked the repair box, but it didn't wanna do that. So I went into the system recovery tool to go back to (the only restore point) which is yesterday, but when I try and do that, it says "Details: An unspecified error occurred during System Restore. (0x80070002)
I don't know alot about computers, and I'm currently writing this on my laptop, since I can't enter my computer in any way
An Error Occurred Starting Vegas Pro Error 0x80070002 (message Missing)?
Mar 12, 2011I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
View 1 Replies View RelatedCan't Install Windows 7 Service Pack 1 - Error 0x80070002
May 29, 2011I have Win 7 Ultimate 32-bit. I have never had SP1 before. I recently used system restore to roll back a few days and now when I try to install have Win 7 Ultimate 32-bit. I have never had SP1 before. I recently rolled back my PC a few day with system restore, then updated Windows to the newest updates. I downloaded SP1 32-bit and when I try to install it, it installs right to almost the end and gives me: Error 0x80070002.
View 1 Replies View RelatedError 0x80070002 While Making A Clean Install Of Windows 7 X64?
Jun 1, 2011After saving money for quite while, i was able to finally buy a new pc, i had assembled other pc`s for my friends and never had any trouble installing windows on their systems, but now, every time i try to install windows 7 x64, the computer hangs while extracting windows files, then, after some time it prompts me with the error 0x80070002, saying that it didn`t find the required files, so i tried with many suggestions:- Updated to the latest BIOS.- Switched the RAM modules from A2 and B2 to A1 and B1 (my cpu fan was in the way so i had to buy another, and yup, i`m living on cup noodles).
- Ran memtest x86+ for 8 hours (no errors)- Ran sea tools but it didn´t detect any drives (still don´t know why, and the windows 7 installer detects the hdd just fine, also tried it on another computer and works fine)- Switched sata cables, switched sata connectors.- Switched from ahci to ide on the Bios, but it didn´t detect any drives after that, so i returned to ahci.- Disassembled all the pc and re-assembled it, re-checked every connection with every install guide 3 times- Tryied to install again, several times, with the same problem, never getting beyond the 48% extraction, mostly 12%, 9% and so on.And right now, i´m poor, un-able to work, and dangerously nearing towards un-employement (sold my previous computer to buy this one, my savings are gone, and can´t afford to get sick, a little problem called "living in Mexico"
Error 0x80070002 While Making A Clean Install Of Windows 7 X64
Oct 3, 2012i just upgrade my windows 7 ultimate to windows 8 9200 then i guess i delete some files and now im having problem with this 0x80070002 error.
View 1 Replies View RelatedError (0x8007045D And 0x80070002) While Installing Windows 7 Ultimate 64bit
Nov 14, 2011i've recently decided to reinstall windows 7 64bit because my computer started freezing up occasionally while browsing, playing games or even watching Internet videos... the freezes would pass after a few minutes and the computer would recover and start up/shut down would take a long time as well. so i thought that reinstalling windows might work as i haven't done it in a long while. but i encountered a problem while installing windows 7 64bit, i receive these errors (0x8007045d and later after trying a few things it changed to 0x80070002 both times it stated something about files missing or being corrupt) while on the "extracting windows files" section of the setup.
i've done a clean install every single time and formated my hdd (seagate barracuda 7200.10 320gb) but got an error every single time but at various %'s (once it went up to 70% other times it would get stuck as soon as 5%). i've tried switching ram's, switching dvd drives, disconnecting my gpu but nothing seems to work... has my hdd died? or perhaps my mobo or cpu is acting up? i burned my windows 7 iso's myself via imgburn - i've used the slowest possible burn speed (x2) and did it multiple times but every single dvd gave same error. also i've tried multiple iso's and downloaded them multiple times as well to confirm they didn't get corrupted while downloading.
my specs:
os: formatted hdd right now but previously i used windows 7 64bit
motherboard: intel bearlake g31 (i think, not sure... its such an old mobo)
cpu: intel core 2 duo 3.3ghz
gpu: geforce 9600gt - tried removing but didn't work
ram: ocz 2x2gb 800mhz ddr2 - tried switching to an exact same pair from another computer but it didn't work
hdd: seagate barracuda 7200.10 320gb
dvd-rom: not sure but i tried two different ones, both producing errors
Error: 0x80070002
Dec 19, 2009I have just upgraded from Vista to Windows 7 ( A few days) and after a look around thought I'd do a Back-up but I received an error message that it couldn't be completed with Error - 0x80070002.
So, please, can someone explain this and how to overcome it.
0x80070002 Error Can't Start Computer
Jun 6, 2011I recently have had major issues with my HP pavilion dv6 laptop. I bought it about a year ago, and it has worked reasonably well until now. I downloaded some iso files, and I wanted to run them, because they were an old game that I really liked of my friends, but he sold it. I tried to copy it onto a disk, but the disk was playing up, so I downloaded DAEMON tools lite so that I could install it. I then had to restart the computer, as you have to with new software, and It seemed fine. I then turned on the computer the next day, and the CHKDSK program ran. I didn't worry about this too much, it happens occasionally.but when the computer started up properly; it wouldn't run any programs. when I tried to get things to go, it would always come up with a balloon in the corner saying that the file system structure is corrupt or unusable, please run CHKDSK on file system C:. So I did. The next day(today), everything worked fine. I could do just about everything. I told CHKDSK and the memory diagnostics tool to run while I was at school. I didn't notice anything bad at the time. Everything worked when I got home from school; except that most of my gadgets had no writing on them, which concerned me a little, and some of my startup programs didn't start.
View 4 Replies View RelatedError 0x80070002 When Saving Image
Oct 21, 2009While trying to save an image to an external hard drive, I get a message saying "Failed to complete, file 0x8007002 not found". I'm running the Windows 7 Evaluation copy.
View 5 Replies View RelatedError Occurred While Troubleshooting 0x80070002
Jul 14, 2012What does this mean and how do I fix it.
View 2 Replies View RelatedReady Mediacenter Error 0x80070002?
Oct 22, 2012Play Ready Mediacenter error 0x80070002
View 1 Replies View RelatedUnable To Complete Backup - Error 0x80070002?
Mar 7, 2010When attempting to backup a system image and/or selected libraries or files on an OEM installation of Windows 7 Home Premium 64-bit, I am receiving an error message. The initial pop-up states: The Last Backup Did Not Complete Successfully When I click on the pop-up to check the backup and select �More Details,� I see the following message. The System cannot find the file specified Error Code: 0x80070002 No additional information is provided. (And no clue is provided regarding what �file� is not found.) While I am attempting to backup to an external hard drive connected via eSATA, this error also occurs when I attempt a backup to either an external USB drive or a DVD.
I have attempted to run various backup scenarios wherein [a] Windows selects what to backup, [b] I choose a system image only, [c] I choose libraries only, or [d] I choose a very small data directory in a directory outside of the libraries. The error is always the same. When the system image is included, the backup does run for a time before the error message occurs � and a significant amount of data is written to the drive. When I run a file-only backup, the error is almost instantaneous. So far, in attempting to resolve the problem I have taken the following steps (although not necessarily in this order): Confirmed the registry profiles image paths are accordance with the information found at: The Storage Team at Microsoft - File Cabinet Blog : Common causes and solutions to Backup, System Restore, and Complete PC Backup problems - updated!. Everything was correct, no problems found. Ran the system file checker (sfc /scannow) with no errors reported. Scanned all hard drives (chkdsk x: /r) Confirmed that VSS and Windows Backup Services are running via services.msc Although I didn�t think it applied, I tested the Hotfix suggested at: You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM. No success. Reviewed the information at Error code 0x80070002 when you back up files in Windows 7 however the scenarios did not apply and therefore the solutions were not available to me. Checked the error logs at C:WindowsLogsWindowsBackup, but the error log is empty . Ran a Clean Boot via msconfig.exe Attempted to run Backup in Safe Mode, but of course Backup & Restore cannot be run in safe mode, even if I try to start the services manually (Error 1084). Reset Backup Files Configuration, using instructions at: Backup User and System Files - Reset to Default Configuration I am extraordinarily frustrated. This is a new computer, and an almost new installation of Windows. I have obviously missed something, but don�t know what it is. I am desperate for a solution.
Windows 7 Code 28 Driver - Mass Storage Controller Driver - Error Code 28
Jun 13, 2012i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
View 1 Replies View RelatedError "HRESULT=0x80070002" When Installing Itunes
Mar 8, 2012Here is the error I get when trying to install itunes.An error occurred during installation of assembly
'Microsoft.VC80.CRT,version="8.0.50727.
4053",type="win32",publicKeyToken="1fc8b3b9a1e18e3b",processo
rArchitecture='x86'. Please refer to Help and
Support for more information. HRESULT: 0x80070002
Here is the error when trying to install "Visual C++ 2008 SP1 Redistributable Package (x86)"
error 1935.An error occurred during the installation of assembly
'Microsoft.VC90.ATL,version="9.0.30729.1",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="86x",type="Win32"'.Please refer to help and support for more information. HRESULT=0x80070002.
I believe this has something to do with the windows update I installed previously. I am not 100% sure I did install it before the errors started happening, but I am pretty sure. I have full administrative permissions. I was able to install a ".NET" frame work, however, it did not fix my problem.
Email Error Code 5 / Error Code 15
Jan 19, 2010In the last few months I have been getting error messages in my Yahoo mail account. It will not go to next email and returns an 'Error Code 5' or recently an 'Error Code 15'. It says "Sorry for the inconvenience. You have stumbled upon an unexpected, temporary problem." This happens every other email. What are these codes and why is this happening?
View 1 Replies View RelatedError: System File Integrity Check And Repair Error Code 0X490
Jun 28, 2011i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory
Error Occured - Add License... Error Code 15106?
Sep 9, 2011I am using Windows 7 32-bit Premium. I'm trying to run a Batch file with several dll's, and I'm getting this error:Banner: Error Occurred - Add LicenseBody: Unable to enumerate resources. Error Code: 15106I have tried to google this, but I haven'tAlso, if I even try to register any of the Batch's DLLs manually, I get this error:Banner: RegSvr32body: The Module "C:Bla Bla Bla...." was loaded but the call to "INSERT DLL HERE" failed with error code 0x80028011c.For more information about this problem, search online using the error code as a search term.
View 1 Replies View RelatedError Calling Shell Execute. Error Code: 5?
Jul 31, 2012i downloaded a disk image iso file for one of my programs. i mounted and ran the image. the setup.exe file runs fine but when i make any selction i get a "error calling shell execute. error code: 5" message and the program terminates.i tried it on a xp machine and also burned a cd but am still getting the error message
View 1 Replies View RelatedError Code 31 Windows 7
Jul 8, 2011my name is urbain.i,m busy installing cs5 production in my computer,now it,s show me error(s) 31,132.
View 1 Replies View RelatedWindows 7 Error Code 0146
Jan 8, 2012It ran in safe mode with networking so I was able to email all of the files I wanted WHEW! That was until today and now it won't load to any screen except for the screen that gives you the choice to repair, or to run windows normally. Either one brings me to the login screen but the login never comes up. The screen just sits there with the mouse. I have a dell inspiron, that we purchased 1 year and 1 month ago ergh! This means that the warranty is out. I have read so many forums, and tried to launch repair and it just won't do it. Dell won't send me a new recovery disk because I don't have the warranty anymore, but rather as others have stated Dell states that it is the hard drive as an easy answer. I don't believe it. Why does it load in safe mode, well except for today? I just need my laptop to be working. It is a life line in my house. From the things I have read on here it could be a virus or malware issue that is corrupting the boot sector. But I don't know what else to do about repairing it. The installation cds are not working. I have used f8 to load from the disk drive and it got to the starting set up and stopped.
View 5 Replies View RelatedError Code 0X8007045D On Windows 7?
Nov 29, 2012I have a dell computer on windows 7, I am getting an error code 0X8007045D i also cannot boot my computer to the home screen, it takes me to the system recovery options i did the command chkdsk /f /r but it tells me "windows cannot run disc check on this volume because it is write protected what do i do now?
View 3 Replies View RelatedError Code 0x8007045D Windows 7?
Nov 2, 2011I am trying a fresh install of win 7 ultimate after installing a new hdd (it is compatable). After a period of time the following error pops up:error code 0x8007045D win 7I am trying to run chkdsk ?:/f on a PC that has windows and is running using an usb connection to the disk that I want to checkMy problem is when I enter cmd mode it automatically only shows C: etc. What I need to do is change the drive letter to check the other hdd connected to the usb e.g e:
View 5 Replies View Related