Can't Backup, Error Code 0x8007045D

Oct 22, 2012

I have an HP tx2627cl table notebook (swivel screen), Win 7 Home prem OS, 4GB ram and a Seagate ext HD (75GB free of 279GB) which will not allow me to backup. I get error message 0x8007045D because of "an i/o device error". I can copy files to that external HD (I, but can't use Windows Backup. I did a check disk of I:/ and got no errors. When I click on Backup to I:/, it starts, says it is creating a shadow copy, runs for a couple of minutes (about 5-6%) then I get the above error message. I have switched USP ports, and tried doing a backup from a "clean boot state" with the recommended settings--all to no avail.

View 3 Replies


ADVERTISEMENT

Error Code 0X8007045D On Windows 7?

Nov 29, 2012

I have a dell computer on windows 7, I am getting an error code 0X8007045D i also cannot boot my computer to the home screen, it takes me to the system recovery options i did the command chkdsk /f /r but it tells me "windows cannot run disc check on this volume because it is write protected what do i do now?

View 3 Replies View Related

Error Code 0x8007045D Windows 7?

Nov 2, 2011

I am trying a fresh install of win 7 ultimate after installing a new hdd (it is compatable). After a period of time the following error pops up:error code 0x8007045D win 7I am trying to run chkdsk ?:/f on a PC that has windows and is running using an usb connection to the disk that I want to checkMy problem is when I enter cmd mode it automatically only shows C: etc. What I need to do is change the drive letter to check the other hdd connected to the usb e.g e:

View 5 Replies View Related

[INSTALL] Windows 7 64x Reinstall Error Code: 0x8007045D

Jan 24, 2012

i had to reinstall my windows 7 64x dell inspiron 1750 laptop using my windws 7 home premium disc that came with my laptop when i bought it because it was in a constant starup repair loop. the disc worked find until i got to the part where it said "expanding windows files." it was stuck at 0% after a whilr and then a message popped up that said error code:0x8007045D. during the time when it was expanding windows files i could hear my disc running, but after a while it stops.when i tried running the disc again, the error code message didn't pop up, but the expanding windows files was stuck at 0% forever. when i tried turning on my computer without using the disc, it goes directly from the "finding window files" screen to startup repair. it tells me that it can't fix the problem and i click on a link that tells me that the problem is that my boot configuration is corrupt. i have also ried cleaning my disc and it doesn't look like there's any stratches on it.

View 8 Replies View Related

Windows 7 Error Code 0x8007045d During Clean Install

May 7, 2012

emachines em350 netbook with windows 7 installed. For some reason it got messesd up and he tried to do a system restore. Since then when you try to boot up its saying input a password to unlock the harddrive which we dont know. After you input wrong code 3 times you get option to continue which takes you to black screen saying no bootable device detected press any key to continue. Next i tried to do clean install with windows 7 from a usb this goes fine untill it asks for missing cd/dvd driver i have found away round this which is to select cancel then when back on install now screen swap the usb to another port and continue. This works so i select terms and so on then get to part where it asks where to install windows now i have formated and made a active partition on the hard drive but when i try to click next i get error code 0x8007045d this is where im stuck.

View 9 Replies View Related

Backup Error Code: 0x81000033

Feb 2, 2011

A couple of weeks ago I did something stupid and lost all my data from my hard drive on my old XP computer. Having now bought a new machine and restored as many files as I can, I have purchased a Seagate Expansion 1TB external drive on which to backup my files (Once bitten, twice shy,)I'm now using Windows 7 Home Premium 64-bit with a 500GB hard drive (not much on it at the moment) but when I tried to do my first backup today using the Windows 7 utility the backup aborted at less than half complete giving me the error message: 0x81000033 "Windows Backup skipped backing up system image because one of the critical volumes is not having enough free space. Free up some space by deleting unnecessary files and try again."I've searched on the Net and found that this is by no means an isolated problem and probably involves a partition (whatever that means) that is too small. MS want to charge a fee for assistance as my Windows 7 was purchased with the computer. All the other so called 'fixes' are so way over my head that I a) don't understand what they are talking about and b) simply don't have the confidence to try them without an idiot's step-by-step guide in front of me.I know it's a bit long winded but my question is, does anyone know of a SIMPLE way to back up my files or have I just wasted my money on an external drive that I cannot use?

View 1 Replies View Related

Backup Error Code: 0x80780048

Jun 9, 2009

The Action Center on my setup keeps reminding me of this:

Anyone else received this?

The funny thing is, I have more than enough space. I have 120 gigs free, with an 81 gig backup.

View 3 Replies View Related

Windows 7 Will Not Backup Error Code 0x81000033

Jun 12, 2010

I get a message that says " Windows skipped backing up system image because one of the critical volumes is not having enough free space. Free up some space by deleting unnecessary files and try again."I am trying to back up to a external HD with 163 GB free out of 232 GB. I have been to windows answers and they have nothing but suggestions that are way over my head. Each moderator has a different solution, it appears that MS is aware of this problem but does not have a cure. How is one supposed to create a backup and restore.

View 3 Replies View Related

Error Code 0x81000033 When Using Windows 7 Backup?

Dec 28, 2012

I have a 3 year old Alienware desktop running Win 7 Professional. I have never had any major problem including running weekly backups to a second internal hard drive using Windows backup. About 3 weeks ago the backup failed and produced the mentioned error code. The description of the error is misleading and makes you think that you have insufficient room on your backup drive. I subsequently replaced the drive with a larger one but the problem persisted. I then researched (including here) the error code and found "solutions" that were all over the map including some frankly worthless responses. The most frequently described cause is attributed to lack of space in a 100 MB "system reserved" partition on the boot drive. When I checked my drive this partition was not present. I had an OS partition, a Recovery partition, and a 16 MB unlabeled partition. I thought that perhaps the 16 MB partition was supposed to be the 100 MB partition and, because it was too small, was causing the backup problem. I then took my computer to Data Doctors.

View 4 Replies View Related

Error Code 0x81000033 When Using Windows 7 Backup

Dec 29, 2012

I have a 3 year old Alienware desktop running Win 7 Professional (see my profile for more computer specs). I have never had any major problem including running weekly backups to a second internal hard drive using Windows backup. About 3 weeks ago the backup failed and produced the mentioned error code. The description of the error is misleading and makes you think that you have insufficient room on your backup drive. I subsequently replaced the drive with a larger one but the problem persisted. I then researched (including here) the error code and found "solutions" that were all over the map including some frankly worthless responses. The most frequently described cause is attributed to lack of space in a 100 MB "system reserved" partition on the boot drive. When I checked my drive this partition was not present. I had an OS partition, a Recovery partition, and a 16 MB unlabeled partition. I thought that perhaps the 16 MB partition was supposed to be the 100 MB partition and, because it was too small, was causing the backup problem.

View 2 Replies View Related

Cannot Backup On External HD - Error Code 0x81000031

Oct 5, 2011

I cannot back up my computer on either of two external hard drives. In both cases I get an error code 0x81000031. I use windows 7, 32-bit and do not think I have Bitlocker on my machine.

View 2 Replies View Related

Backup Fails, Error Code 0x8100019

Jul 10, 2009

Ok, I've been researching solutions for issues with windows 7 backup for weeks now and have had no luck. My VSS service is running fine, and everything was backing up fine til a short while ago, and has been failing since. I have been backing up to a network share on my file server.

My roommate has been having the same issue for some time now, however he was attempting to do this with an external hard drive. Same error of 0x8100019. I've tried everything I can think of and I've had no leads thus far. Any pointers on this would be helpful.

View 0 Replies View Related

Backup / Network Error Code Is 0x80070043

Aug 7, 2009

3 PC's all running Windows 7 Ultimate

1 Desktop connection via wire to router

2 Laptops connected via Wireless (Linksys wrg54g)

All 3 PC's are visible on all 3 PC's via the Homegroup in Windows Explorer. I can browse/copy/write files on all 3. All sweet. All 3 can print to the 2 Printers connected to the Desktop.

Laptop A is configured to Backup using the Windows 7 Backup to the Desktop. This works fine.

Laptop B however when trying to backup to the desktop I get an error message after I have selected the Drive in the setup screen and I've entered my username/password credentials

The error code is 0x80070043

I've tried everything and I'm quite experienced.

Both laptops for all intents and purposes are identical.

View 9 Replies View Related

Windows 7 Backup Fails With Error Code: 0x80070002?

Jan 31, 2011

7 Ultimate on a Lenovo computer, 8 mb RAM, Q8200 CPU. Recently I started getting notifications that my backup failed because the system cannot find the file specified, and the above error code. I'm not specifying any files, and I've reset backup to its default settings, all to no avail. I'm backing up to an external USB hard drive. In fact I bought a new one because I thought the old one was too small

View 3 Replies View Related

Backup Failed At 57% Several Times With Error Code 0x81000039

Jan 20, 2012

I have been trying to do a backup with system image since Jan 15th on an Iomega 1TB external HD. Tried about 7 times and each time the backup fails at 57%. The message I receive with each failure is as follows- "Windows backup encountered an error when accessing the remote shared file. The semaphore timeout period has expired. Details: Error code 0x81000039" I chatted with a tech from my external HD manufacturer and he finally told me that the problem was with my OS and settings. I tried doing a backup on a different external HD and still failed at 57%. I have no idea which remote shared file the program is looking for. I have a home network and one other computer. That laptop was turned on so if it was looking for a file there it was available. The tech suggested that I turn off my antivirus and firewall and if I was concerned about intrusion to disconnect from the internet. Did that and the backup still failed. I have the same setup on desktop and laptop Windows 7 SP!, Vipre antivirus and firewall, and I was able to do a backup on my laptop. Another slight problem is when I have the Iomega HD running my computer will freeze randomly. For this reason I don't keep it on all the time but just turn on for a monthly backup. I was able to do one initial backup on that HD with no problem. I was told to look at the windows backup log files but they all have a .etl extension and I do not know how to open them to see if the logs give me any idea what file it is hanging up on.

View 7 Replies View Related

Windows 7 Backup Aborts With Error Code 0x80070422

Mar 19, 2011

win7 Backup aborts with error code 0x80070422

View 4 Replies View Related

Windows 7 Backup Aborts With Error Code 0x81000037

Feb 4, 2013

Windows backup gets to 57% and fails with "Windows Backup failed while trying to read from the shadow copy on one of the volumes being backed up. Please check in the event logs for any relevant errors. (0x81000037)."

View 9 Replies View Related

ERROR CODE 0x81000019 Hard Drive Backup + BEEPING NOISE?

Jan 7, 2013

I am getting a beeping sound noise from the top right corner of my vaio laptop. The problem seems to be one my hardware drivers, to make matters worse i cant even back up i just get the error code in the title! I have checked my "system reserved space" which is at 100mb so i have enough memory to back it up. I also had drivers problems with my laptop when trying to establish wifi connection after moving house, "missing driver" i now use a cable.

View 1 Replies View Related

Error: 0x8007045D

Jan 4, 2010

I can's get past "error code 0x8007045D" while installing Windows 7. I'm working off the CD Disk that was sent to me. Any help?

View 5 Replies View Related

Error 0x8007045D While Transferring From SD Card?

Dec 30, 2012

used my Go Pro yesterday and was trying to get some vid off of it(2.39gb worth) and it gets about half way then I get the error. Also Im not sure if this is unrelated but I keep getting a trojan warning from mcafee(I know its not that great but I get it for free soo..) Anyway mcafee says there is 2 trojans on my computer but it cant delete but when I scan with malwarebytes it shows nothing

View 2 Replies View Related

Request Could Not Be Performed Because Of I / O Error 0x8007045D

Nov 6, 2011

I'm having trouble with my hard drive, it's a WD elements 320gb hard drive and when I try to put anything on it or take thing off it it give me this message saying it was unable to do it because of an unexpected error "error 0x8007045D: the request could not be performed because of an I/O device error" I have some important files on this hard drive.

View 1 Replies View Related

Can't Install Windows 7 - Error: 0x8007045d

Jun 12, 2012

i cant install windows 7 on my new computer, got the hdd from my old laptop, idk how to format it but when i click new in windows 7 cd menu it pops up with error : Failed to create a new partion on the selected unused space :Error: 0x8007045d I have also tried : format c:/ in cmd and diskpart or something like that.

View 1 Replies View Related

Troubleshooters NOT Working, Getting Error:0x800705B4 And 0x8007045D?

Jun 30, 2012

So I'm not exactily sure when it happened? From the sounds of it, it was when installing the mircrosoft updates sometime last week?? Anywho.. I noticed when trying to run ANY troubleshooter on my Windows 7 (starter, weak I know). Wether it be a network troubleshooter, or the windows update trouble shooter.. any of them I always get one of the following errors: 0x8007045D or 0x800705B4. The further along I got, the more my comp would freeze up, NOT RESPONDING.... 5 minutes to unfreeze each action, then 2 seconds beofre it would freeze up all over again. GRR. So with my own style of troubleshooting.. System Restore... Nope. Didn't fix it. Tried the "FIX-IT" from MS website, as there were known UPDATE issues that sounded similaar.

But it didn't work either. Then saw the recommended CMD, scannow thingy... But no matter how many times I try.. it always freezes at 55% even leaving it on over night. Sigh. I am pretty BLONDE when it comes to computers, anything past standard maintence is far beyond meI have a GATEWAY LT27 Netbook (manf:nov.2011, no warranty) 32bit. NO Disc drive, and it says I have Service Pack 1, I don't know if that has been updated? and that is why I am broken?

View 1 Replies View Related

Error (0x8007045D And 0x80070002) While Installing Windows 7 Ultimate 64bit

Nov 14, 2011

i've recently decided to reinstall windows 7 64bit because my computer started freezing up occasionally while browsing, playing games or even watching Internet videos... the freezes would pass after a few minutes and the computer would recover and start up/shut down would take a long time as well. so i thought that reinstalling windows might work as i haven't done it in a long while. but i encountered a problem while installing windows 7 64bit, i receive these errors (0x8007045d and later after trying a few things it changed to 0x80070002 both times it stated something about files missing or being corrupt) while on the "extracting windows files" section of the setup.

i've done a clean install every single time and formated my hdd (seagate barracuda 7200.10 320gb) but got an error every single time but at various %'s (once it went up to 70% other times it would get stuck as soon as 5%). i've tried switching ram's, switching dvd drives, disconnecting my gpu but nothing seems to work... has my hdd died? or perhaps my mobo or cpu is acting up? i burned my windows 7 iso's myself via imgburn - i've used the slowest possible burn speed (x2) and did it multiple times but every single dvd gave same error. also i've tried multiple iso's and downloaded them multiple times as well to confirm they didn't get corrupted while downloading.

my specs:
os: formatted hdd right now but previously i used windows 7 64bit
motherboard: intel bearlake g31 (i think, not sure... its such an old mobo)
cpu: intel core 2 duo 3.3ghz
gpu: geforce 9600gt - tried removing but didn't work
ram: ocz 2x2gb 800mhz ddr2 - tried switching to an exact same pair from another computer but it didn't work
hdd: seagate barracuda 7200.10 320gb
dvd-rom: not sure but i tried two different ones, both producing errors

View 4 Replies View Related

Email Error Code 5 / Error Code 15

Jan 19, 2010

In the last few months I have been getting error messages in my Yahoo mail account. It will not go to next email and returns an 'Error Code 5' or recently an 'Error Code 15'. It says "Sorry for the inconvenience. You have stumbled upon an unexpected, temporary problem." This happens every other email. What are these codes and why is this happening?

View 1 Replies View Related

Windows 7 Code 28 Driver - Mass Storage Controller Driver - Error Code 28

Jun 13, 2012

i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed

View 1 Replies View Related

Backup Error - Backup Was Not Successful

Aug 3, 2009

Does anyone know what would cause the following backup error?

The backup was not successful. The error is: Windows Backup encountered a problem while determining additional locations of one of the users included in backup. (0x81000038).

View 6 Replies View Related

Error: System File Integrity Check And Repair Error Code 0X490

Jun 28, 2011

i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490

My Hardware is:

AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory

View 6 Replies View Related

Error Occured - Add License... Error Code 15106?

Sep 9, 2011

I am using Windows 7 32-bit Premium. I'm trying to run a Batch file with several dll's, and I'm getting this error:Banner: Error Occurred - Add LicenseBody: Unable to enumerate resources. Error Code: 15106I have tried to google this, but I haven'tAlso, if I even try to register any of the Batch's DLLs manually, I get this error:Banner: RegSvr32body: The Module "C:Bla Bla Bla...." was loaded but the call to "INSERT DLL HERE" failed with error code 0x80028011c.For more information about this problem, search online using the error code as a search term.

View 1 Replies View Related

Error Calling Shell Execute. Error Code: 5?

Jul 31, 2012

i downloaded a disk image iso file for one of my programs. i mounted and ran the image. the setup.exe file runs fine but when i make any selction i get a "error calling shell execute. error code: 5" message and the program terminates.i tried it on a xp machine and also burned a cd but am still getting the error message

View 1 Replies View Related

0x8007045D - Windows 7 Won't Install?

Jan 11, 2011

Today I decide to make a clean install of Windows.Boot from DVD and try to install ... when goes to 25 - 50% give me this error: 0x8007045DTelling me that are broken files (whatever). I try with a different DVD but the result is the same.I need to work and I can't install Windows.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved