Troubleshooters NOT Working, Getting Error:0x800705B4 And 0x8007045D?
Jun 30, 2012
So I'm not exactily sure when it happened? From the sounds of it, it was when installing the mircrosoft updates sometime last week?? Anywho.. I noticed when trying to run ANY troubleshooter on my Windows 7 (starter, weak I know). Wether it be a network troubleshooter, or the windows update trouble shooter.. any of them I always get one of the following errors: 0x8007045D or 0x800705B4. The further along I got, the more my comp would freeze up, NOT RESPONDING.... 5 minutes to unfreeze each action, then 2 seconds beofre it would freeze up all over again. GRR. So with my own style of troubleshooting.. System Restore... Nope. Didn't fix it. Tried the "FIX-IT" from MS website, as there were known UPDATE issues that sounded similaar.
But it didn't work either. Then saw the recommended CMD, scannow thingy... But no matter how many times I try.. it always freezes at 55% even leaving it on over night. Sigh. I am pretty BLONDE when it comes to computers, anything past standard maintence is far beyond meI have a GATEWAY LT27 Netbook (manf:nov.2011, no warranty) 32bit. NO Disc drive, and it says I have Service Pack 1, I don't know if that has been updated? and that is why I am broken?
I have a dell computer on windows 7, I am getting an error code 0X8007045D i also cannot boot my computer to the home screen, it takes me to the system recovery options i did the command chkdsk /f /r but it tells me "windows cannot run disc check on this volume because it is write protected what do i do now?
I am trying a fresh install of win 7 ultimate after installing a new hdd (it is compatable). After a period of time the following error pops up:error code 0x8007045D win 7I am trying to run chkdsk ?:/f on a PC that has windows and is running using an usb connection to the disk that I want to checkMy problem is when I enter cmd mode it automatically only shows C: etc. What I need to do is change the drive letter to check the other hdd connected to the usb e.g e:
I have an HP tx2627cl table notebook (swivel screen), Win 7 Home prem OS, 4GB ram and a Seagate ext HD (75GB free of 279GB) which will not allow me to backup. I get error message 0x8007045D because of "an i/o device error". I can copy files to that external HD (I, but can't use Windows Backup. I did a check disk of I:/ and got no errors. When I click on Backup to I:/, it starts, says it is creating a shadow copy, runs for a couple of minutes (about 5-6%) then I get the above error message. I have switched USP ports, and tried doing a backup from a "clean boot state" with the recommended settings--all to no avail.
used my Go Pro yesterday and was trying to get some vid off of it(2.39gb worth) and it gets about half way then I get the error. Also Im not sure if this is unrelated but I keep getting a trojan warning from mcafee(I know its not that great but I get it for free soo..) Anyway mcafee says there is 2 trojans on my computer but it cant delete but when I scan with malwarebytes it shows nothing
I'm having trouble with my hard drive, it's a WD elements 320gb hard drive and when I try to put anything on it or take thing off it it give me this message saying it was unable to do it because of an unexpected error "error 0x8007045D: the request could not be performed because of an I/O device error" I have some important files on this hard drive.
i cant install windows 7 on my new computer, got the hdd from my old laptop, idk how to format it but when i click new in windows 7 cd menu it pops up with error : Failed to create a new partion on the selected unused space :Error: 0x8007045d I have also tried : format c:/ in cmd and diskpart or something like that.
i had to reinstall my windows 7 64x dell inspiron 1750 laptop using my windws 7 home premium disc that came with my laptop when i bought it because it was in a constant starup repair loop. the disc worked find until i got to the part where it said "expanding windows files." it was stuck at 0% after a whilr and then a message popped up that said error code:0x8007045D. during the time when it was expanding windows files i could hear my disc running, but after a while it stops.when i tried running the disc again, the error code message didn't pop up, but the expanding windows files was stuck at 0% forever. when i tried turning on my computer without using the disc, it goes directly from the "finding window files" screen to startup repair. it tells me that it can't fix the problem and i click on a link that tells me that the problem is that my boot configuration is corrupt. i have also ried cleaning my disc and it doesn't look like there's any stratches on it.
emachines em350 netbook with windows 7 installed. For some reason it got messesd up and he tried to do a system restore. Since then when you try to boot up its saying input a password to unlock the harddrive which we dont know. After you input wrong code 3 times you get option to continue which takes you to black screen saying no bootable device detected press any key to continue. Next i tried to do clean install with windows 7 from a usb this goes fine untill it asks for missing cd/dvd driver i have found away round this which is to select cancel then when back on install now screen swap the usb to another port and continue. This works so i select terms and so on then get to part where it asks where to install windows now i have formated and made a active partition on the hard drive but when i try to click next i get error code 0x8007045d this is where im stuck.
i've recently decided to reinstall windows 7 64bit because my computer started freezing up occasionally while browsing, playing games or even watching Internet videos... the freezes would pass after a few minutes and the computer would recover and start up/shut down would take a long time as well. so i thought that reinstalling windows might work as i haven't done it in a long while. but i encountered a problem while installing windows 7 64bit, i receive these errors (0x8007045d and later after trying a few things it changed to 0x80070002 both times it stated something about files missing or being corrupt) while on the "extracting windows files" section of the setup.
i've done a clean install every single time and formated my hdd (seagate barracuda 7200.10 320gb) but got an error every single time but at various %'s (once it went up to 70% other times it would get stuck as soon as 5%). i've tried switching ram's, switching dvd drives, disconnecting my gpu but nothing seems to work... has my hdd died? or perhaps my mobo or cpu is acting up? i burned my windows 7 iso's myself via imgburn - i've used the slowest possible burn speed (x2) and did it multiple times but every single dvd gave same error. also i've tried multiple iso's and downloaded them multiple times as well to confirm they didn't get corrupted while downloading.
my specs: os: formatted hdd right now but previously i used windows 7 64bit motherboard: intel bearlake g31 (i think, not sure... its such an old mobo) cpu: intel core 2 duo 3.3ghz gpu: geforce 9600gt - tried removing but didn't work ram: ocz 2x2gb 800mhz ddr2 - tried switching to an exact same pair from another computer but it didn't work hdd: seagate barracuda 7200.10 320gb dvd-rom: not sure but i tried two different ones, both producing errors
Today I decide to make a clean install of Windows.Boot from DVD and try to install ... when goes to 25 - 50% give me this error: 0x8007045DTelling me that are broken files (whatever). I try with a different DVD but the result is the same.I need to work and I can't install Windows.
none of my error sounds are working!!! it doesn't matter if they are the default sounds or custom ones, they won't work!!! they won't even work when I go into system sounds and hit 'test' still no sound played but if I navigate to C:\windows\media and double click the sound files, they play in Windows Media Player just fine they just won't work when the error sound needs to I tried restarting the computer but still NONE of my error sounds will work!!! I also tried to reassociate the error sounds in the system sound setting but still won't sound the startup and shutdown sounds DO NOT work either.
I go to install the drivers and i reboot, yes i did everything correctly. even tryed vista drivers. I try to open up ATI control panel which is showing that its there and i get an error message. I goto the directx tool and its showing nothing for my display. which is very odd? It shows my card in device manager. Somehow i think my card and the drivers are not connecting. Ive tried to clean install the drivers probably 10 different times and nothing has worked.
nfs run starting error stopped working.i also copied fix.what can i do? pls hlp me.my conf is intel core i3,6gb ram,500gb,dh61ww,1696mb inbuild graphics.
I've been having an issue with my PC ever since I've installed an Avermedia Live Gamer Capture Card. It literally broke my computer the first time causing my graphics card to die out immediately after starting windows was complete. I managed to install fresh copy of win7 x64 and has been running alright, but my kaspersky internet security 2013 wont come up on start up and I went to uninstall and reinstall and the uninstaller gets stopped by error 1719 and refuses to uninstall. Also my computer somewhat froze with a weird alien sounding *** that was going on and then finally froze and i rebooted my PC and nothing again so far but I still cant go without an antivirus.
Error es displayed - "Internet everywhere has stopped working: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". i went to Orange and they said the problem might be the O/S bt my technician checked it and its ok. i was givn a patch application at orange and still the problem is nt solved. um using Windows 7 Home Basic laptop, Intel Pentium processor P6100 with a 3GB ddr3 memory nd 320GB HDD. but it works well with my Pentium 4 desktop.
It's a Toshiba Laptop with Windows 7 Installed. (Original Copy). However, just about 2 day's back, I could not use my Microphone Inbuilt as it was not working. Fyi, the Speakers are working perfectly. Have checked the Laptop and found the Drivers all installed, but could not find any error. We have been using this Laptop for mostly skype calls and used extensively. It would be almost 3 months now. But just a couple of days back that the Mic did not start functioning.
I had the same 3 updates continually installing everytime I logged on. They were sucessful in update history but kept comming back. I ran the system rediness tool, but it didn't help. I ran the microsoft fix it soultions for windows update normal then aggressive. Now I get this error while checking for updates. I tried to run sfc /scannow and then sfc /verifyonly but get the following error: windows resource protection could not perform the required operation. I also tried to install the latest service pack got the following error: error_sxs_componet_store_corrupt(0x80073712). When I look at programs->installed updates nothing listed, also when I look at programs->turn on/off windows features nothing listed.
I bought the Editors Keys Studio Series SL300 Microphone. The Mic is supposed to have all of the required drivers already installed inside of it so that when you plug it into the computer it will be ready to go (it's a USB Mic btw). The problem is when I plug the mic in, it says that the USB Audio Device is not working properly. When I look under the properties for that device it says: Device Status-This device cannot start. (Code 10). I've tried troubleshooting the device and everything but nothing is working. All of the other devices installed in the mic are working properly, just not this one. Since it won't work properly the mic does not even get detected by my laptop, it doesn't show up under detected recording devices.
I've been using the same outlook 2010 for over a year now, with no problems..2 days ago I started getting 'Microsoft Outlook has stopped working' messages. The message pops up every time after about 30 seconds from starting Outlook. I've made another outlook account under a different windows profile and it works just fine..so not sure what the problem is. I've tried to make a new acct on the original profile, but still doesnt work.
ive been having a problem with internet explorer crashing since i bought my laptopim using ie9 and i keep getting the msg saying internet explorer has encountered a problem and needs to close (i appoligize if its not the exact words). than it closes all my programs down. i dont know if it has to do with another problem i have been having while playing facebook games and watching movies using flash player. right out of the blue my game or movie (whichever im doing) freezes than either says i need to update flashplayer or it just shows a big "!" were my game or movie should be.
Lately whenever I attempt to install a new application I get the "application has stopped working" error message. Has happened now with several different applications. Sometimes I get an installation error 1001. Does anyone know why this occurs? Do I have a corrupt system file or registry? I have tried several different registry cleaners to no avail.
I constantly get a loop of "Windows Explorer has stopped working" errors. I've been trying to resolve this for hours now, I've looked at other threads similar to my problem but nothing seems to work. I'm currently on Safe Mode as this is the only way I can do anything without getting the error.
Here is AppCrash report: Version=1 EventType=APPCRASH EventTime=129004320084720403 ReportType=2 ...........
I have no restore points in system restore, already tried.
i am running windows 7 home premium 64 bit on my core i3 lennovo laptop Problem is that i have been running a 2nd monitor and about a month ago the laptop screen went crazy and stopped working but the monitor kept working so i just went along with that. All has been fine but 2 days ago a tried to log in and the computer froze so i manually restarted it to find the startup repair come up, it did its thing, restarted a few times over a day and then it said that the problem could not be repaired, i tried it again and the same thing happened.I saw the infinite loop tutorial so i tried it and got to the final stages and it said that the action could bot be performed because of an i/o error.I searched around and saw that people have used chkdisk And sfc scannow. I tried these but kep geting the same messge about the i/o error.
My mom has an HP Mini 210-1044NR laptop. It no longer boots up right. I've tried to get the desktop screen to load in normal mode and safe mode, yet I keep getting the same error message.It says Windows Explorer has stopped working. Windows can check online for a solution to the problem the next time you go online.If I click close the program, it gives her a black screen and nothing happens. I cannot get to the start menu, even. Ctrl + Alt + Del brings up task manager, but it doesn't really give me much to work with.I did have the desktop loaded at one point, but then it all froze up and shut down.The problem details are:Problem Event Name: InPageErrorError Status Code: c0000010Faulting Media Type: 00000003OS Version:6.1.7600.2.0.0.768.11Locale ID: 1033Is there any way to fix this? Maybe bring the desktop back up? Or even get to the start menu to run something and fix it? I am going crazy trying to figure out what to do
