Windows 7 Cannot Load Drivers Code 10?
Oct 29, 2011Windows cannot load drivers code 10?
View 2 Replies
ADVERTISEMENT
Windows Cannot Load The Device Driver, Code 39
Nov 4, 2011My HP Pavilion with Windows 7 is not seeing my Samsung TS-H653L CD/DVD reader/writer. When checking my Device Manager for this unit, it shows the following message: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)." I tried to "update this driver" but the answer is that "this driver is up to date". Can't find any website with Samsung TS-H653L driver updates. Tried removing the driver and rebooting but same thing happens.
View 3 Replies View RelatedWindows 7 Won't Load If Remove Optical Drive (error Code 0x490)
Apr 1, 2012I want to remove my optical drive (ASUS dvd/rw) as I never use it, however after I disconnected it Windows wont load. It begins to load and then flashes a blue screen and restarts. If I plug my optical drive back in everything is boots up fine. how I can remove my drive and still be able to boot?
Things I have tried (with no success):
- Disabling and uninstalling the drive from the control panel
- checking boot priority (SSD is my boot drive), optical drive is now completely removed from boot sequence in BIOS (it was 3rd)
In windows repair (following the restart from blue screen) I found this:
Root cause found recent driver installation or uprgrade may be preventing the system from starting Repair Action: system files integrity check and repair Result: Failed Error Code: 0x490
Windows 7 Will Not Start, OS Is Not Able To Load Drivers?
Mar 31, 2012I have been trying to use the installer dvd to try and repair windows. At the screen where I can select to load drivers, I don't see an option from the place that says "Select an operating system that you want to repair". I hit next, and I go the startup repair from recovery tools. Every time I run the tool, I get a message that says that the tool may have completed successfully, reboot to find out
View 9 Replies View RelatedWindows 7 Asking To Load Drivers Through Media (CD / DVD Or USB)
Aug 22, 2011Windows 7 is asking me to load drivers through media like usb ,cd/dvd, floppy disks etc.
View 1 Replies View RelatedWindows Doesn't Load After Installing Ati Drivers?
Jun 13, 2012I'm having a problem with catalyst drivers. I installed Windows 7 32-bit yesterday and everything was working fine until I installed catalyst control center, which now causes the system to stay stuck on the blue windows wallpaper without explorer or mouse cursor. I can get to safe mode and perform a system recovery, then I can boot normally. I also tried multiple versions of drivers, but it always does the same thing. Im using Radeon HD5770, Gigabyte P43T-ES3G Mobo, Intel Core2Quad 2,5 GHz (not sure about the exact model number) and 4 GB Ram. Everything worked fine before reinstalling windows and my system specs are exactly the same as they were before.
View 7 Replies View RelatedUnable To Update Or Load Any Drivers In Windows 7
Jul 3, 2011I am running windows 7 home edition. A couple months ago I got the bad image date virus that disable my google chrome and my epson workforce printer, I had found it disable my print spooler, I got rid the the virus, but it did more damage, I uninstalled the printer drivers and went through the windows services and set them all to automatic, but I cannot reinstall the driver.
Then I saw my graphics and sound drivers are out dated but I cannot update them either, it just times out when I try to update them. I noticed when I try to update other programs, they hang up on the system restore point, so I tried to create a new one. I get the shadow volume cannot be created message, I set the shadow volume services to automatic, and went through all the dependency's but I still can't create a restore point, I am guessing the problems are related
Windows 7 Won't Load Drivers For Network Adapters
May 30, 2012Anyways my problem is that my vaio is running Windows 7 64bit and suddenly one morning NONE of the network adapters were working. No WiFi, no ethernet, no nothing. I figured something just happened to the drivers (happened before) so i'd just reinstall them...except this time I'm hit with:
Code :This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
I have tried everything short of a full restore. I tried downloading the drivers straight from Sony, just the driver files for Atheros, I can't do a restore point since I don't have any from before the problem. I have searched everywhere for a working solution but haven't found anything yet. I would like to avoid sending it in.....it's still under warranty but I don't have a Sony store near me and I'm gonna be going out of town in a couple weeks..
Device Is Not Working Properly Because Windows Cannot Load Drivers
Jan 27, 2012I am having issues with the atheros ethernet, when I try to update drivers I get the following "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
View 1 Replies View RelatedSATA Drivers - Load In Windows Recovery Options
Sep 24, 2010How to Load SATA Drivers in Windows System Recovery Options ?
View 0 Replies View RelatedLoad Dell Printer Photo All-in-one 962 Drivers On Windows 7?
Dec 1, 2012i cant load the drvers (dell printer all in one 962) on my windows 7 laptp. dells web site dont have them'
View 2 Replies View RelatedSATA Drivers - Load In Windows XP Setup On Dual Boot
Feb 27, 2010How to Load SATA Drivers in Windows XP Setup on Dual Boot PC ?
View 0 Replies View RelatedNew SATA Controller Card, Windows Wont Boot, How To Load Drivers
Oct 27, 2011Quick summary: SATA Controllers on motherboard are not working. Ordered and installed a PCI-E SATA Controller Card. Connected Hard Drive & DVD Drive to new card ports. Upon attempting to boot installed windows 7, it spontaneously restarts before loading. It seems that I need to get the Controller Card's drivers installed. i try startup repair mode, and I can load the driver and see the Windows 7 installation after that, but then I don't know how to permanantly add the drivers for this installation.
View 1 Replies View RelatedBSOD Installing Drivers After A Fresh Windows Install, Code 0xf4
Aug 12, 2012My computer was suffering from random bsods and viruses before. I atributed the bsods to viruses, but after reinstalling windows 7, I found that the bsods still happened. It seems to happen when installing drivers, or running prime95. Booting into safe mode allows me to pretty much do anything.
When crashing, it does a slow crash, where I can move the mouse around, but the startbar and any other programs dont respond. Explorer then crashes, followed shortly by a bluescreen.
Does Not Load Some Drivers
Nov 11, 2009I installed Windows 7 Professional over the weekend and after installing all the Windows updates the computer ran extremely well. Today, I installed Office 2007 and didn't have any problems. When I turned off the computer there were about 20 updates for Office that got automatically installed.
When I turned on the computer again, the starting process was painfully slow, and the display resolution was not correct. On the Device Manager, the display adapter includes the correct NVIDIA adapter but there is a warning "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" (But it worked fine before I turned it off!) If I update the driver software, it says that the one I have is up to date! This also occurs with the coprocessor.
Some Drivers Refuse To Load
Jan 11, 2009Some drivers are not signed and Window 7 will refuse to load them. What to do? Turn on test signing which allows Windows 7 to load unsigned drivers. To enable this you have to open a command prompt as administrator and type the following command: Code: C:>bcdedit -SET TESTSIGN NO
View 4 Replies View RelatedDoes Not Load Some Drivers (intermittent)
Oct 26, 2009I'm rather new to Windows 7 but I've done my fair share of installing versions of XP and Vista to my machines and I've never run into this issue.
I have a Dell XPS M1330 computer with 3GB ram. I chose to install the 32 version of Windows 7 Pro from Vista Home. Everything, including Aero was confirmed would work when I ran the upgrade advisor. I did a clean installation after backing up all my files and loaded the most current drivers from the Dell website that were applicable to my serial number.
My problem is that when the OS is shut down or restarted PROPERLY, some drivers don't load properly and I'm stuck with a frozen home screen. I definatly know that my trackpad and video drivers aren't loading because the cursor will not move and the screen resorts to the lowest resolution possible.
However, if I do a hard re-boot by pressing and holding the power button, effectively triggering my safe-mode prompts, everything loads properly. It seems VERY strage to me that this would happen - I would expect it to either work or fail - not a combination of both!
I'm just curious if this is something anyone else has come accross - or if I should call Dell and make sure the drivers are current for 7 and try re-installing everything.
Usb Devices Will Not Load Drivers?
Aug 27, 2011when i plug in any thing into my usb plug it will say it failed to load drivers and then it shows up onder other devices in the computor management screen. It will show the name of the device but will not find the drivers. I can plug in the same devices into my lap top that has same windows7 on it and they will work.
View 1 Replies View RelatedSATA HDD - Cannot Get Drivers To Load
Aug 31, 2011I am building a workstation atm for my grandmother -
Spec's -
Spoiler :
Mobo - Gigabyte 990FXA-UD7 AMD 990FX AM3+
PCU - AMD Phenom II X6 1100T Black Edition 3.3Ghz
HDD - WD Caviar Blue 500GB SATA HD 7200/16MB/SATA-6G
Windows 7 Refuses To Load And System Repair Wont Load
Jun 25, 2012I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
View 1 Replies View RelatedSelect Which Drivers To Load Each Time?
Feb 14, 2012I would like to use a specific driver but when I don't have my eGPU connected the driver causes BSODs. Is it possible to have to bootup options one with the driver loaded and one without. I googled about that a lot but I wouldn't find anything. I even willing to upgrade to windows 7 Ultimate if it won't work on Home Premium
View 2 Replies View RelatedLoad Drivers In Win7 Install
Dec 26, 2009Can someone please explain how this works? like where does it put the files etc and can i install the latest NVIDIA drives through the load drivers option during windows 7 install?
View 1 Replies View RelatedUnable To Load ASPI Drivers
Jan 4, 2010when i tried to install the software cd ripping software bonkenc
on my new windows 7 laptop i get this message
Unable to load ASPI drivers! CD ripping disabled
i followed this link
The BonkEnc Project - I get the message "Unable to load ASPI drivers! CD ripping disabled!"
as they said on the site when i google the problem but then i got confused.
because there are now windows 7 drivers here
Adaptec - Windows ASPI Package
are these drivers on my machine some where and windows just cant find them.
Can't Load Unsigned Drivers In 7057 X64
Mar 22, 2009I upgraded from 7000 x64 to 7057 x64 and now I can't load unsigned drivers even after changing the option in advanced options with boot into F8. I use a Rosewill RNX-G300E wireless PCI adapter so I can't connect to the internet.
View 0 Replies View RelatedNo Drivers Were Found Click Load
Nov 29, 2011When I try to install windows 7 it asks me where to install but it comes up with "No drives were found. Click Load Drivers to provide a mass storage driver for installation".My pc is a Acer Aspire ax3300 Desktop.In the Advanced BIOS Features the 1st Boot Device shows: HDD :P1 -WDC WD6400AkS-22A7B2,I am trying to install windows because I tried factory restoring and the upstairs electric switch just happened to switch off and when i turned back on i got the following message on the black screen:/Windows/system32/winload.exe.I managed to get it up and running with usb booting and then I started to install the drivers as the Hard drive deleted everything on it, so it did not have any Acer software. When I installed a few drivers it started to crash every 30 seconds and would take 1 minute until I could move the mouse, then it would do the exact thing. I don't know what I can do but I have took the SATA cables? out of the hard drive and waited 20 minutes, put them back in but the same thing happens. I have clicked the load Default settings on the CMOS Set up Utility but that hasn't done anything either.
View 7 Replies View RelatedNew Hard Drive Doesn't Load Drivers?
Jul 20, 2012I bought a new hard drive but toshiba said it isn't formatted correctly and now my drivers don't load
View 1 Replies View RelatedDrivers Are Corrupted Or Missing (Code 39)
Oct 26, 2011All my USB drives are gone. I get the message, "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)". One of the solutions I saw was to remove any UpperFilter and LowerFilter keys in two registry values. I did that, disabled and enabled the drives but still no go. I also ran Microsoft Fixit but it was useless.
View 3 Replies View RelatedThe Drivers For This Device Are Not Installed, (Code 28)
May 31, 2011The drivers for this device are not installed. (Code 28)
View 2 Replies View RelatedGraphics And Mousepad Drivers Fail To Load On Restart?
Oct 5, 2010Ok so I recently moved from vista to windows 7 and everything is great except that about 40% of the time when I restart my computer, the mousepad and video card drivers don't load up. The mousepad stops responding and the resolution goes to 800x600. When I look in device manager those two drivers say they failed to initialize and need a restart, I will post the exact error messages soon. Then when I restart everything runs fine. But this consistently happens, I believe it happens everytime I install something new and then restart. I can't figure out how to stop this from happening, anyone know what to do?
View 4 Replies View RelatedVideo And Touchpad Drivers Wont Load On Every Other Boot
Nov 3, 2009Im running into a very strange situation.
Im running 7 Ultimate on a Lenovo 3000 N100 Laptop that I use for work.
Originally I had the RTM that i revieved from work (HP). Once 7 was released to the public I purchased the Ultimate anytime Upgrade to make my copy of 7 my own. Here is my issue, With the RTM installed I had no problems. But once I entered my new key I started having boot problems.
Every other boot, when I get to the login screen It seem that my graphics driver and my touchpad driver did not load and I must shut down and reboot.
when I reboot it then works fine. i have done a Fresh Install 3 times,
Downloaded updated drivers for my chipset, graphics, and touchpad. Could it be a BioS issue?
I was wondering if anybody has ever encountered this or knows how to remedy this.
Cd Drivers Don't Start Automatically In Auto-play To Load
Nov 27, 2009I have a new monitor, and also a new USB to RS 2343 converter cable that both came with a CD that apparently has Drivers for the devices on them.
They don't start automatically in auto-play to load, and my reading of the file labels in the CD makes no sense to me.
So, with the CD in the drive just sitting there, what do I do to actually get the PC to recognize the Drivers in the Folder(s), and load them in the appropriate places ?