Windows 7 Won't Load Drivers For Network Adapters
May 30, 2012
Anyways my problem is that my vaio is running Windows 7 64bit and suddenly one morning NONE of the network adapters were working. No WiFi, no ethernet, no nothing. I figured something just happened to the drivers (happened before) so i'd just reinstall them...except this time I'm hit with:
Code :This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
I have tried everything short of a full restore. I tried downloading the drivers straight from Sony, just the driver files for Atheros, I can't do a restore point since I don't have any from before the problem. I have searched everywhere for a working solution but haven't found anything yet. I would like to avoid sending it in.....it's still under warranty but I don't have a Sony store near me and I'm gonna be going out of town in a couple weeks..
View 6 Replies
ADVERTISEMENT
Feb 18, 2013
where and how do I get drivers and network adapters for hpg6 without installing into my friends computer
View 1 Replies
View Related
Jul 27, 2011
I am having problems with any type of Network Card or Network USB adapter working with my PC running Windows 7. I had a LinkSys WMP54G PCI card working on this computer about a year ago as I was needing to use a wireless connection but then I didn't use it for 6 months. When I went to use it again, it wouldn't pick up connections at all. Thinking it was an issue with the card, I picked up a Edimax 7612UAn USB adapter thinking it should work out of the box.
When I plug the USB adapter in, the standard Windows driver installation tries to run but an error message occurs stating "Device driver software was not successfully installed" accompanied by "Realtek RTL8191SU Wireless LAN 802.11n USB Failed". If I try to install the drivers manually, nothing changes and in Device Manager the following error message is displayed under Device Status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
View 3 Replies
View Related
Nov 24, 2012
miniport network adaptor
View 2 Replies
View Related
Dec 1, 2011
Today, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
View 2 Replies
View Related
Dec 20, 2010
Win7 64 bit reports a problem with the driver for Microsoft ISATAP Adapter and Toredo Tunneling Adapter. Troubleshooting does not automatically fix it and reports that the drivers are OK. I have seen several other reports of this problem but not yet found a cause or fix
View 6 Replies
View Related
Jul 21, 2011
At the moment I'm using Netgear AV200 powerline adapters and need to add 2 more adapters to my setup.Do I have to stick with Netgear or can I use another brand if they are both compliant with HomePlug AV1 standard and the same speed (200Mbps)Edit: Well apparently all powerline adapters are compatible as long as they are the same type (i.e. Homeplug AV or DS2), so I'll be getting more affordable pair of adapters...
View 1 Replies
View Related
Dec 30, 2009
We have just purchased a new computer with Windows 7 at our office and we were told there weren't any wireless network adapters that were compatible yet for 7. All of the other computers are Windows Vista and they have Ativa Wireless Network Adapters that work fine. It will not work with this new computer. Any suggestions of how to get up and running on the Internet?
View 5 Replies
View Related
Dec 27, 2010
My problem is that i bought some 1gb belkin powerline adapters to give me a better connection in my house than my wireless previously did. However i plugged them in and boom "Unidentified Network - No internet access".Now at first i thought it was because i had them plugging in through and extension lead downstairs so i removed all than and plugged them straight into the wall. This didnt help at all.I read some forums about turning of IPV6 cos apparently.
View 9 Replies
View Related
Aug 18, 2012
I have several VPNs and Virtualizing software installed, and they have this virtual network adapters in the network and sharing centre. In the "connect to a network menu", one shows working internet connection, while the other one shows no internet access, How do I get rid of those entries? I dont mind messing with the registry or the system files.
View 2 Replies
View Related
Apr 22, 2010
Whenever I boot up or disable/enable a network adapter it takes 1-3 minutes before I actually connect. After waiting, I'll see the little round circle spinning in the system tray and then i'm able to connect.While waiting for my adapter to work I noticed under tcp/ip settings that my gateway field is blank. If I put it in and go back, it's still blank. When the adapter finally connects it then shows up in the gateway field.Tried uninstalling AV, different drivers for LAN and wireless and reloading OS.
View 7 Replies
View Related
Dec 27, 2011
I have this device "WAN Miniport (IKEv2)" under Network Adapters and it's always listed as not working. I disabled it a long time ago but it always comes up as an error when I scan my computer. It won't update the driver, Windows always says that there was an error, and as far as I can see it doesn't do anything but it won't let me remove it even though it isn't working.
View 8 Replies
View Related
Mar 30, 2012
Upgraded to windows 7 ultimate 64bit from vista ultimate 64 bit. That didnt fix it. I'm desparate. I've tried everything I can find. It has a realtek 8169 nic on board sabertooth x85. I tried USB adapter and where it normally loads it just says it's installed but shows up in device manager. Like thw tealtek nic with yellow triangle on it. If I try an update driver it returns "parameter is incorrect" message. Its not connected and the is no IP using ipconfig. I Lost all my software CDs and emails with serials etc in a house fire last year.
View 6 Replies
View Related
May 31, 2011
I am running Windows 7 Home Premium (64 bit) on a Dell Inspiron 560. I am using a DI-524 D-Link wireless router. I have an Acer Aspire One Net Book running Windows XP Home it is equipped with an internal wireless network adapter. I can connect/communicate with router and access the internet with no problems whatever. However, when I connect an external wireless network adapter e.g. Alpha AWUS036H I cannot get a connection when I disable my internal network adapter. I have also tried the Trendnet TEW-424UB USB external wireless network adapter and the symptoms are exactly the same. If I leave home and use another Wireless point of access I have no trouble connecting using the external adapters which means the problem is confined to my personal home network. I have removed and reinstalled my router, and the network adapters drivers etc. I have uninstalled my Norton Firewall and and disabled my Windows firewall to no avail. I have removed my WEP security features and tried to run it open with no improvement. I have connected the external network adapters on a neighbours computer running XP to see if I could connect to my home network. That didn't work as well. Bottom line is I simply cannot get an external wireless network adapter to work with my router. Yet my internal netbook adapter connects with no problems at all.
View 2 Replies
View Related
Sep 9, 2012
I have over 50 virtual networking adapters in device manager, I have posted this question in many forums, and still cannot get rid of these pesky unused extra adapters. I know they have been created by using Virtualbox, and by creating many virtual machines and updating virtualbox. Unfortunately, I have tried uninstalling virtualbox and the drivers all remain in devicemanager. DeviceMgmt also does not allow me to uninstall or delete the adapters, (When I do they just stay there, even after rebooting.)I most likely have to go into the registry and delete them, but they are in so many different places there, I need to know the correct place to delete them. I have a bet that this is the forum where I will get the answer for this even though I have posted in virtualbox forums, technet, MSDN, superuser, serverfault, and stackoverflow.
View 7 Replies
View Related
Apr 9, 2010
How to Install Ralink based Belkin Network Adapters ?
View 0 Replies
View Related
Mar 23, 2012
How do you download legacy hardware i need to install network adapters ISATAP and teredo tunneling and 6to4 adapters cause its giving me a code 10 error
View 1 Replies
View Related
Jul 17, 2012
My Network Adapters has suddenly disappeared after a Critical update by Windows update, now my network is X'ed out. I already did reformat and still nothing and in the past all I do is to System restore but after a while it had errors and I was forced to reformat but after that there's still no connection.
View 5 Replies
View Related
Jun 18, 2012
In Windows Home Premium 64bit we encounter this problem on a machine after trying to uninstall a norton product manually.The norton software led to serious problems of randomly emerging BSODs.As system uninstall did not work we researched a tutorial on how to manually uninstall the soft.t can be found here Enterprise Support - Symantec Corp. - How to manually uninstall the Symantec Endpoint Protection client from Windows Vista, Windows 7, and Windows 2008 R2 64-bitEverything worked smoothly until the last three steps of the routine failed (12.-14We can not uninstall/delete the wireless network adapters as described. After clicking "uninstall" there is the window that asks for confirmation (to uninstall) but after clicking "yes" the device manager window simply refreshes - and the device remains unchanged.
View 4 Replies
View Related
Jan 12, 2013
The comp started BSOD'ing out of nowhere, a new adapter I think called ISATAP or something like that shows up under network adapters in device manager which had a yellow exclamation icon. (Code: 31). Disabling or uninstalling its drivers resulted in BSOD's. Googled around and found the only way to fix it was to delete some registry entries, so without backing up the registry I deleted some keys. I don't remember which keys but the image above is the result. I got Ubuntu live booted up and using it to post this because my Win 7 installation obviously can't connect to the Internet.
*I tried reinstalling drivers (Marvel Yukon & Belkin), disabling and enabling stuff but nothing seems to be happening.
*Got some registry fixing tools or whatever, still the same.
View 6 Replies
View Related
Jun 24, 2011
I recently uninstalled all of my wireless network devices, these were a simple Wireless Card which was in a PCI slot and a wireless USB adapter, I uninstalled them from the device manager, and now under "Network Devices" I have about 32 'Microsoft 6to4 adapters' all with the yellow triangle on them, and then also there are 2 Microsoft ISATAP adapters, again with the yellow triangles. also, when I click on them, they say "This device cannot be started (error code:10)"And also now, my fast ethernet port has a yellow triangle on it too, but windows cannot find a driver.
View 1 Replies
View Related
Apr 18, 2012
whenever i try to connect yo a wireless network with my samsung laptoprv 510 it cant connect its gives me an error with my wireless adapter i have downloaded the drivers but yet still no progress
View 2 Replies
View Related
Nov 10, 2012
Hw do I download wireless drivers for samsung RV510
View 4 Replies
View Related
Jul 15, 2012
is there anyone to use network load balancing on windows 7 without using expensive NLB modem. People told me to use VMware with Kerio but is there anyway to use it on win 7 w/o the 2 above and work with IDM + utorrent, since i got 2 fibre internet connection?
[URL]
View 1 Replies
View Related
Mar 31, 2012
I have been trying to use the installer dvd to try and repair windows. At the screen where I can select to load drivers, I don't see an option from the place that says "Select an operating system that you want to repair". I hit next, and I go the startup repair from recovery tools. Every time I run the tool, I get a message that says that the tool may have completed successfully, reboot to find out
View 9 Replies
View Related
Aug 22, 2011
Windows 7 is asking me to load drivers through media like usb ,cd/dvd, floppy disks etc.
View 1 Replies
View Related
Oct 29, 2011
Windows cannot load drivers code 10?
View 2 Replies
View Related
Jun 13, 2012
I'm having a problem with catalyst drivers. I installed Windows 7 32-bit yesterday and everything was working fine until I installed catalyst control center, which now causes the system to stay stuck on the blue windows wallpaper without explorer or mouse cursor. I can get to safe mode and perform a system recovery, then I can boot normally. I also tried multiple versions of drivers, but it always does the same thing. Im using Radeon HD5770, Gigabyte P43T-ES3G Mobo, Intel Core2Quad 2,5 GHz (not sure about the exact model number) and 4 GB Ram. Everything worked fine before reinstalling windows and my system specs are exactly the same as they were before.
View 7 Replies
View Related
Jul 3, 2011
I am running windows 7 home edition. A couple months ago I got the bad image date virus that disable my google chrome and my epson workforce printer, I had found it disable my print spooler, I got rid the the virus, but it did more damage, I uninstalled the printer drivers and went through the windows services and set them all to automatic, but I cannot reinstall the driver.
Then I saw my graphics and sound drivers are out dated but I cannot update them either, it just times out when I try to update them. I noticed when I try to update other programs, they hang up on the system restore point, so I tried to create a new one. I get the shadow volume cannot be created message, I set the shadow volume services to automatic, and went through all the dependency's but I still can't create a restore point, I am guessing the problems are related
View 3 Replies
View Related
Dec 6, 2009
In Control Panel, when I click Network & Sharing Center, it freezes and does not recover. I am logged in as Administrator. I have no Internet connection; the taskbar icon for Wireless is greyed out.
View 3 Replies
View Related
Jan 27, 2012
I am having issues with the atheros ethernet, when I try to update drivers I get the following "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
View 1 Replies
View Related
