Whenever I boot up or disable/enable a network adapter it takes 1-3 minutes before I actually connect. After waiting, I'll see the little round circle spinning in the system tray and then i'm able to connect.While waiting for my adapter to work I noticed under tcp/ip settings that my gateway field is blank. If I put it in and go back, it's still blank. When the adapter finally connects it then shows up in the gateway field.Tried uninstalling AV, different drivers for LAN and wireless and reloading OS.
After starting Windows 7, the system is setting up the network connection (blue circle on network sign). I bought my Dell computer 2 weeks ago. It was very fast until this weekend. Starting up takes 10-15 minutes. When the network is found everything works fine again.During the network searching it is possible to access internet by Chrome. IE and Firefox are not working.
- I tried to fix this by enabling all the non-windows related services, but no changes.
- I uninstalled and reinstalled the driver of my network card, with no success.
Today, I managed to redecorate my bedroom; where my computer sat on top of a shaky, wooden desk. That desk is now gone, caput, and replaced by a much bigger, sturdier and prettier glass replacement.Before I dissasembled the computer to re-decorate, I was able to browse the internet at ease. There were no problems at all...However, after the new desk was setup - and all wires replaced in their correct slots, I find that I am unable to connect to the internet, or even the house's network! For the past year, I have been wired to the router using a RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC. It was plugged into an extension cord, in my room, into the Ethernet port in the back of my computer. Downstairs, it's twin was situated no less than 2 feet away from the router - plugged into the first port.Now, when I boot up the computer, the network notification presents the following message: "Unidentified Network. No network access", and sometimes presents a yellow ! next to it. So, I am reduced to typing on my mother's laptop - which has no problems connecting to the network.I am able to use the ipconfig /release command, but unable to use the /renew - it hangs in the command prompt, then tells me that the DHCP server cannot be located. The IP, beforehand, was reverted to 169.254.223.117 - before all of this, I was 192.168.0.5?
At the moment I'm using Netgear AV200 powerline adapters and need to add 2 more adapters to my setup.Do I have to stick with Netgear or can I use another brand if they are both compliant with HomePlug AV1 standard and the same speed (200Mbps)Edit: Well apparently all powerline adapters are compatible as long as they are the same type (i.e. Homeplug AV or DS2), so I'll be getting more affordable pair of adapters...
We have just purchased a new computer with Windows 7 at our office and we were told there weren't any wireless network adapters that were compatible yet for 7. All of the other computers are Windows Vista and they have Ativa Wireless Network Adapters that work fine. It will not work with this new computer. Any suggestions of how to get up and running on the Internet?
I am having problems with any type of Network Card or Network USB adapter working with my PC running Windows 7. I had a LinkSys WMP54G PCI card working on this computer about a year ago as I was needing to use a wireless connection but then I didn't use it for 6 months. When I went to use it again, it wouldn't pick up connections at all. Thinking it was an issue with the card, I picked up a Edimax 7612UAn USB adapter thinking it should work out of the box.
When I plug the USB adapter in, the standard Windows driver installation tries to run but an error message occurs stating "Device driver software was not successfully installed" accompanied by "Realtek RTL8191SU Wireless LAN 802.11n USB Failed". If I try to install the drivers manually, nothing changes and in Device Manager the following error message is displayed under Device Status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
My problem is that i bought some 1gb belkin powerline adapters to give me a better connection in my house than my wireless previously did. However i plugged them in and boom "Unidentified Network - No internet access".Now at first i thought it was because i had them plugging in through and extension lead downstairs so i removed all than and plugged them straight into the wall. This didnt help at all.I read some forums about turning of IPV6 cos apparently.
I have several VPNs and Virtualizing software installed, and they have this virtual network adapters in the network and sharing centre. In the "connect to a network menu", one shows working internet connection, while the other one shows no internet access, How do I get rid of those entries? I dont mind messing with the registry or the system files.
I have this device "WAN Miniport (IKEv2)" under Network Adapters and it's always listed as not working. I disabled it a long time ago but it always comes up as an error when I scan my computer. It won't update the driver, Windows always says that there was an error, and as far as I can see it doesn't do anything but it won't let me remove it even though it isn't working.
Win7 64 bit reports a problem with the driver for Microsoft ISATAP Adapter and Toredo Tunneling Adapter. Troubleshooting does not automatically fix it and reports that the drivers are OK. I have seen several other reports of this problem but not yet found a cause or fix
Upgraded to windows 7 ultimate 64bit from vista ultimate 64 bit. That didnt fix it. I'm desparate. I've tried everything I can find. It has a realtek 8169 nic on board sabertooth x85. I tried USB adapter and where it normally loads it just says it's installed but shows up in device manager. Like thw tealtek nic with yellow triangle on it. If I try an update driver it returns "parameter is incorrect" message. Its not connected and the is no IP using ipconfig. I Lost all my software CDs and emails with serials etc in a house fire last year.
I am running Windows 7 Home Premium (64 bit) on a Dell Inspiron 560. I am using a DI-524 D-Link wireless router. I have an Acer Aspire One Net Book running Windows XP Home it is equipped with an internal wireless network adapter. I can connect/communicate with router and access the internet with no problems whatever. However, when I connect an external wireless network adapter e.g. Alpha AWUS036H I cannot get a connection when I disable my internal network adapter. I have also tried the Trendnet TEW-424UB USB external wireless network adapter and the symptoms are exactly the same. If I leave home and use another Wireless point of access I have no trouble connecting using the external adapters which means the problem is confined to my personal home network. I have removed and reinstalled my router, and the network adapters drivers etc. I have uninstalled my Norton Firewall and and disabled my Windows firewall to no avail. I have removed my WEP security features and tried to run it open with no improvement. I have connected the external network adapters on a neighbours computer running XP to see if I could connect to my home network. That didn't work as well. Bottom line is I simply cannot get an external wireless network adapter to work with my router. Yet my internal netbook adapter connects with no problems at all.
I have over 50 virtual networking adapters in device manager, I have posted this question in many forums, and still cannot get rid of these pesky unused extra adapters. I know they have been created by using Virtualbox, and by creating many virtual machines and updating virtualbox. Unfortunately, I have tried uninstalling virtualbox and the drivers all remain in devicemanager. DeviceMgmt also does not allow me to uninstall or delete the adapters, (When I do they just stay there, even after rebooting.)I most likely have to go into the registry and delete them, but they are in so many different places there, I need to know the correct place to delete them. I have a bet that this is the forum where I will get the answer for this even though I have posted in virtualbox forums, technet, MSDN, superuser, serverfault, and stackoverflow.
Anyways my problem is that my vaio is running Windows 7 64bit and suddenly one morning NONE of the network adapters were working. No WiFi, no ethernet, no nothing. I figured something just happened to the drivers (happened before) so i'd just reinstall them...except this time I'm hit with:
Code :This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
I have tried everything short of a full restore. I tried downloading the drivers straight from Sony, just the driver files for Atheros, I can't do a restore point since I don't have any from before the problem. I have searched everywhere for a working solution but haven't found anything yet. I would like to avoid sending it in.....it's still under warranty but I don't have a Sony store near me and I'm gonna be going out of town in a couple weeks..
How do you download legacy hardware i need to install network adapters ISATAP and teredo tunneling and 6to4 adapters cause its giving me a code 10 error
My Network Adapters has suddenly disappeared after a Critical update by Windows update, now my network is X'ed out. I already did reformat and still nothing and in the past all I do is to System restore but after a while it had errors and I was forced to reformat but after that there's still no connection.
In Windows Home Premium 64bit we encounter this problem on a machine after trying to uninstall a norton product manually.The norton software led to serious problems of randomly emerging BSODs.As system uninstall did not work we researched a tutorial on how to manually uninstall the soft.t can be found here Enterprise Support - Symantec Corp. - How to manually uninstall the Symantec Endpoint Protection client from Windows Vista, Windows 7, and Windows 2008 R2 64-bitEverything worked smoothly until the last three steps of the routine failed (12.-14We can not uninstall/delete the wireless network adapters as described. After clicking "uninstall" there is the window that asks for confirmation (to uninstall) but after clicking "yes" the device manager window simply refreshes - and the device remains unchanged.
The comp started BSOD'ing out of nowhere, a new adapter I think called ISATAP or something like that shows up under network adapters in device manager which had a yellow exclamation icon. (Code: 31). Disabling or uninstalling its drivers resulted in BSOD's. Googled around and found the only way to fix it was to delete some registry entries, so without backing up the registry I deleted some keys. I don't remember which keys but the image above is the result. I got Ubuntu live booted up and using it to post this because my Win 7 installation obviously can't connect to the Internet.
*I tried reinstalling drivers (Marvel Yukon & Belkin), disabling and enabling stuff but nothing seems to be happening.
*Got some registry fixing tools or whatever, still the same.
I recently uninstalled all of my wireless network devices, these were a simple Wireless Card which was in a PCI slot and a wireless USB adapter, I uninstalled them from the device manager, and now under "Network Devices" I have about 32 'Microsoft 6to4 adapters' all with the yellow triangle on them, and then also there are 2 Microsoft ISATAP adapters, again with the yellow triangles. also, when I click on them, they say "This device cannot be started (error code:10)"And also now, my fast ethernet port has a yellow triangle on it too, but windows cannot find a driver.
I bought this Fujitsu laptop for less than a year. Its only for my school work. It takes forever to bootup, startup and it sometime hangs when I open up a program or typing.For the bootup, it takes very long time on the window logo, after that the black screen, followed by the welcome page with the loading cursor. Each of this process take a long time. For startup, its not so long but its still quite lag. For the opening up of program and typing, everytime I open up my visual studio, it will take a long time to show up and even if it showed up, it will be "not responding".So I will have to open it a second time before I can start using itWhen I am typing my codes, it will randomly hang and show that the program is not responding. I am still able to move my cursor though.
My problem is windows 7 hangs and freeze when access 2003 server Enterprise edition. This is not a small network, one of the biggest network.i have doubt on individual users on domain. before 2 months we had department wise users mean, for example Accounts@domainname.local. But after we created the individual users like john@domainname.local to all users. this is i believe the cause of problem. When we acess the server via the software it freezed for 5 seconds and then repeat to normal state. And after some time it hangs for 2 minutes.
So I bought a new Hitachi Deskstar 2 SATA-600 2 TB (3,5'') harddrive yesterday. (I had a WD 320 GB harddrive before changing to the 2TB.)And now, my computer takes maybe 4-5 minutes to show the boot screen (the screen that first appears when you boot your computer, often a green, blue or black one). And while the computer boots up, I can hear this ticking noise from the fans. Demonstration (the best I can):and so on. But when it finally boots (when the boot screen comes up) the fan-noise stops, and goes back to the "normal" noise.But my computer is working fine otherways. My computer is not slow other than the startup, and every program or game is working perfectly fine.I think maybe it have something to do with the size of the harddrive? Could there be problems changing from a 320GB to 2TB? [code]
My laptop was working fine until about two days ago. I can't remember doing anything harmful to it specifically but suddenly significant loading issues have manifested. Today it took me about fifteen to twenty minutes simply to get to the stage where the computer was usable. Once it reached this stage, everything is fine and nice and speedy again. I have run virus checks using Malwarebytes and AVG (nothing detected), run CCleaner, defragged and removed all unnecessary start-up programs, resulting in no improvement whatsoever.
My specs are as follows: OS Version: Microsoft Windows 7 Home Premium 32 bit Processor: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz, x64 Family 6 Model 37 Stepping 2 Processor Count: 4 RAM: 2546 Mb Graphics Card: NVIDIA GeForce GT 330M, 1024 Mb Hard Drives: C: Total - 596211 MB, Free - 527235 MB; Motherboard: TOSHIBA, NWQAA, 1.00, 123456789AB Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled
My computer's startup is very slow. I'm pretty sure my system is clean from any kind of malware, I just think it's all the programs that run on startup that is causing this problem.
I have Win 7 Enterprise x64 installed for few months, and it started to clog up. When I start it up, after wallpaper shows up, hard drive starts to grind like I'm defragmenting it, and it keeps doing it for half a minute.If I try to start up firefox during those initial seconds, it works slow, and so do other programs. I have 15+ GB free on my main C drive. I thought about clean install but the pain of reinstalling the programs and settings makes me cringe so I would like to try to clean the computer up.What programs do you recommend for the job? I can check for viruses and malware with Security Essentials, are there other programs that could possibly check if I have too much startup programs, and somehow optimize Windows back?
I have just installed a new Dell 660 desktop, everything is fine bar the boot time,when starting the Dell sign comes up with the blue bar, as it reaches halfway it freezes for about 1 to 2 minutes, at the same time there are two notes saying f2 and f12, when the blue line is complete the next page shows and asks me to choice, on pressing enter up comes W7 and everything runs okay. As i have only basic knowledge of computing i would be most grateful if any answers be put in simple language, i am now using DVI instead of VGA that is the only change i have made from my old desktop
For a quick run down of specs, I'm running Home premium 64-bit on an Advent Roma 4001, Intel Dual Core T4400, 4GB RAM and 500GB HD.
It's during the log-in screen that it tends to hang, on both the "Please wait..." and "Welcome" messages it takes between 30 seconds - 2 minutes, but the main problem occurs after logging in. The CPU usage, apart from System Idle Process (of course) is pretty much zero, and the RAM usage is down at about 30MB. Everything seems responsive, however, when I attempt to open a program or process I'm getting incredible lag, the type of unresponsiveness that would tempt you to do a hard reset.
The strange thing is it doesn't actually appear to be unresponsive. The programs all load given time and, for all running slowly for an amount of time, still run. What I have noticed is that svchost.exe seems to kick in at an undefined time and puts the RAM usage up to about 62,000K, with the CPU usage still being very low. When terminating the process, the theme will lose it's transparenecy and revert to a white theme, with processes continuing to run extremely slowly, until a few minutes pass, the windows 7 theme (with transparency) kicks in again and everything loads up immediately. After that, everything's fine - lightning fast.
I've tried chkdsk, messing around with msconfig and various other things to no avail. Am I missing something here? I'm stumped. I think given the problems I've been having aside from this (booting) I'm tempted to put it down to a faulty CPU or Harddrive (the 500GB size supports that probability, I think).
When starting up my pc this morning, the startup was exceptionally slow. It initially said it had to install various drivers that were missi. I kept receiving a message saying that windows could not connect to the System Event Notification Service. My McAffee antivirus software keeps turn off the firewall as well.
