when i plug in any thing into my usb plug it will say it failed to load drivers and then it shows up onder other devices in the computor management screen. It will show the name of the device but will not find the drivers. I can plug in the same devices into my lap top that has same windows7 on it and they will work.
View 1 Repliesevery time I clicked on my devices and printers section, it will never fully load. The green loading bar will only get so far then it would just sit there and not load anything. Also it won't load no matter which path I take. I have tried to research solutions for this matter such as I have tried putting my bluetooth on enabled, turning off my printer spooler and removing ccleaner but nothing has helped.
View 1 Replies View RelatedWindows 7 v6.1 32 bit. PC on home network, Two PCs on cable and up to five on wireless. Network Printer. The Devices and Printers page of Control Panel will not load. Green bar starts across the top of the screen but does not complete. Printer still works with MS Office programs. Logitech Web Cam also works. The page opens in Safe Mode. The page does not open when all startup items are disabled in MSConfig
View 9 Replies View Relatedi have an old windows xp pc that my son uses for chat and homework for printing. the problem i,ve now got is he and a friend of his has formatted the pc and installed windows 7.i do know that some of the devices do not have windows 7 drivers because i once checked when he asked me could he have win 7 on it. i didnt bother to upgrade the pc as there was no need.the problem he now has is that everything works but there is nothing on the monitor. it says no input. i have researched on google and the answer i get is because there is no win 7 driver for the nVidia GeForce FX5200.
View 6 Replies View RelatedOwners of HP tx1000 or Authentec biometric devices can now use them on Windows 7.
Authentec has released their drivers now updated to use the biometric framework.
I am not at all very good with computers, it even took me a minute to figure out my OS lol! but i have a serious problem: My USB drivers are no longer reading my phones and other devices the message i get is "USB Device Not Recognized", When i click the message and go through the troubleshoot it gets no where. It's like my computer doesn't even realize that the devices and drivers are malfunctioning, also i don't know if it is related but it seems like files, apps and folders are constantly being deleted without my consent and no one else has access to my pc. i suspect foul play hidden in my system.
View 4 Replies View RelatedI see a lot of questions on drivers and devices for Virtual machines. (Hyper-V, VMware, "XP mode", Virtual PC, etc)
Its important to understand that the devices the virtual machines see are not the actual hardware in the machine.
That is to say...the virtual machine might know that there is a network card available to use, but it doesn't know that the physical network card is a Broadcom 3c905 (for example). The virtual machine thinks that it is a pre-defined device that is written specifically for use in the virtual machine.
Same goes with other hardware, your Nvidia 9800 GTX would show up in the VM as a totally different piece of hardware. And this virtual piece of hardware does not have the features or power of the 9800 GTX nor does it require its device drivers.
Virtual machines use 2 types of devices. Emulated and Synthetic.
Emulated - Drivers/Devices that require a lot of physical box overhead to process for the virtual machine. Basically there is a lot of translation that the hypervisor (virtual pc, hyper-v, etc) must perform for the virtual device to utilize the physical device. These are the types of devices/drivers you will see used in Virtual PC and MS Virtual Server 2005 and some others.
Synthetic - Virtual Devices/Drivers that are highly optimized to perform very seamlessly with the underlying physical device. Hypervisor intervention/translation is kept minimal and therefore performance is greatly improved. Virtual machines using synthetic drivers are often said to be "enlightened". These are generally seen in bare metal hypervisors like Hyper-V and ESXi.
The important thing to take away from this post is that the actual physical devices in your computer are NOT what the virtual machine sees.
The network traffic from your virtual machine is passing through the physical network card, but the virtual machine will "see" a totally different device than what is actually in the computer. This goes for any device.
A couple days ago, I installed Windows 7 (through MSDNAA).
I have a problem with some devices. The situation can be seen here:
I tried updating driver software through windows and it said it was unable to find drivers
I have no idea what the "Unknown Device" may be. The "Multimedia Video controller" I'm guessing is my Nvidia graphics card? The Mass Storage Device I think is my Magicgate memory card slot, but I'm not sure.
I have an Nvidia 8400M GT graphics card and judging by what I've seen on the resolution window (and device manager), I'm currently running on my standard VGA graphics device, and not my Nvidia.
I manually searched for the drivers for my graphics card off the Nvidia site, but every time I try to install it, I get this messege
]I've already tried reformatting and reinstalling windows 7, now I'm running out of ideas. Can anybody please help?
I'm using a Sony Vaio TP3 computer. It's a "desktop" with laptop components and was initially running on Vista.
I have been unable to connect to anything on my wired network, for about the last week. I don't remember making any changes however, I just became unable to connect.I having done a little troubleshooting.1. I can connect to the shares of my Windows Home Server if I use the IP address. The name does not resolve.2. Flushed DNS and restarting DNS server. Flushing DNS works on one client, to allow browsing by the name & restarting DNS works on the other. However neither works after a restart.3. Only my Wifi clients are experiencing this issue. My wired clients, desktops, PS3, Xbox 360, and Boxee can connect perfectly.This issue is not limited to my server. I can't connect to shares on my desktop, nor print to my wired printer.Some network background:I have DSL through CenturyLink and have a Linksys E2000 router.
View 2 Replies View RelatedI installed Windows 7 Professional over the weekend and after installing all the Windows updates the computer ran extremely well. Today, I installed Office 2007 and didn't have any problems. When I turned off the computer there were about 20 updates for Office that got automatically installed.
When I turned on the computer again, the starting process was painfully slow, and the display resolution was not correct. On the Device Manager, the display adapter includes the correct NVIDIA adapter but there is a warning "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" (But it worked fine before I turned it off!) If I update the driver software, it says that the one I have is up to date! This also occurs with the coprocessor.
Some drivers are not signed and Window 7 will refuse to load them. What to do? Turn on test signing which allows Windows 7 to load unsigned drivers. To enable this you have to open a command prompt as administrator and type the following command: Code: C:>bcdedit -SET TESTSIGN NO
View 4 Replies View RelatedI'm rather new to Windows 7 but I've done my fair share of installing versions of XP and Vista to my machines and I've never run into this issue.
I have a Dell XPS M1330 computer with 3GB ram. I chose to install the 32 version of Windows 7 Pro from Vista Home. Everything, including Aero was confirmed would work when I ran the upgrade advisor. I did a clean installation after backing up all my files and loaded the most current drivers from the Dell website that were applicable to my serial number.
My problem is that when the OS is shut down or restarted PROPERLY, some drivers don't load properly and I'm stuck with a frozen home screen. I definatly know that my trackpad and video drivers aren't loading because the cursor will not move and the screen resorts to the lowest resolution possible.
However, if I do a hard re-boot by pressing and holding the power button, effectively triggering my safe-mode prompts, everything loads properly. It seems VERY strage to me that this would happen - I would expect it to either work or fail - not a combination of both!
I'm just curious if this is something anyone else has come accross - or if I should call Dell and make sure the drivers are current for 7 and try re-installing everything.
I am building a workstation atm for my grandmother -
Spec's -
Spoiler :
Mobo - Gigabyte 990FXA-UD7 AMD 990FX AM3+
PCU - AMD Phenom II X6 1100T Black Edition 3.3Ghz
HDD - WD Caviar Blue 500GB SATA HD 7200/16MB/SATA-6G
I have been trying to use the installer dvd to try and repair windows. At the screen where I can select to load drivers, I don't see an option from the place that says "Select an operating system that you want to repair". I hit next, and I go the startup repair from recovery tools. Every time I run the tool, I get a message that says that the tool may have completed successfully, reboot to find out
View 9 Replies View RelatedI would like to use a specific driver but when I don't have my eGPU connected the driver causes BSODs. Is it possible to have to bootup options one with the driver loaded and one without. I googled about that a lot but I wouldn't find anything. I even willing to upgrade to windows 7 Ultimate if it won't work on Home Premium
View 2 Replies View RelatedCan someone please explain how this works? like where does it put the files etc and can i install the latest NVIDIA drives through the load drivers option during windows 7 install?
View 1 Replies View Relatedwhen i tried to install the software cd ripping software bonkenc
on my new windows 7 laptop i get this message
Unable to load ASPI drivers! CD ripping disabled
i followed this link
The BonkEnc Project - I get the message "Unable to load ASPI drivers! CD ripping disabled!"
as they said on the site when i google the problem but then i got confused.
because there are now windows 7 drivers here
Adaptec - Windows ASPI Package
are these drivers on my machine some where and windows just cant find them.
I upgraded from 7000 x64 to 7057 x64 and now I can't load unsigned drivers even after changing the option in advanced options with boot into F8. I use a Rosewill RNX-G300E wireless PCI adapter so I can't connect to the internet.
View 0 Replies View RelatedWhen I try to install windows 7 it asks me where to install but it comes up with "No drives were found. Click Load Drivers to provide a mass storage driver for installation".My pc is a Acer Aspire ax3300 Desktop.In the Advanced BIOS Features the 1st Boot Device shows: HDD :P1 -WDC WD6400AkS-22A7B2,I am trying to install windows because I tried factory restoring and the upstairs electric switch just happened to switch off and when i turned back on i got the following message on the black screen:/Windows/system32/winload.exe.I managed to get it up and running with usb booting and then I started to install the drivers as the Hard drive deleted everything on it, so it did not have any Acer software. When I installed a few drivers it started to crash every 30 seconds and would take 1 minute until I could move the mouse, then it would do the exact thing. I don't know what I can do but I have took the SATA cables? out of the hard drive and waited 20 minutes, put them back in but the same thing happens. I have clicked the load Default settings on the CMOS Set up Utility but that hasn't done anything either.
View 7 Replies View RelatedWindows 7 is asking me to load drivers through media like usb ,cd/dvd, floppy disks etc.
View 1 Replies View RelatedWindows cannot load drivers code 10?
View 2 Replies View RelatedI'm having a problem with catalyst drivers. I installed Windows 7 32-bit yesterday and everything was working fine until I installed catalyst control center, which now causes the system to stay stuck on the blue windows wallpaper without explorer or mouse cursor. I can get to safe mode and perform a system recovery, then I can boot normally. I also tried multiple versions of drivers, but it always does the same thing. Im using Radeon HD5770, Gigabyte P43T-ES3G Mobo, Intel Core2Quad 2,5 GHz (not sure about the exact model number) and 4 GB Ram. Everything worked fine before reinstalling windows and my system specs are exactly the same as they were before.
View 7 Replies View RelatedI am running windows 7 home edition. A couple months ago I got the bad image date virus that disable my google chrome and my epson workforce printer, I had found it disable my print spooler, I got rid the the virus, but it did more damage, I uninstalled the printer drivers and went through the windows services and set them all to automatic, but I cannot reinstall the driver.
Then I saw my graphics and sound drivers are out dated but I cannot update them either, it just times out when I try to update them. I noticed when I try to update other programs, they hang up on the system restore point, so I tried to create a new one. I get the shadow volume cannot be created message, I set the shadow volume services to automatic, and went through all the dependency's but I still can't create a restore point, I am guessing the problems are related
Anyways my problem is that my vaio is running Windows 7 64bit and suddenly one morning NONE of the network adapters were working. No WiFi, no ethernet, no nothing. I figured something just happened to the drivers (happened before) so i'd just reinstall them...except this time I'm hit with:
Code :This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
I have tried everything short of a full restore. I tried downloading the drivers straight from Sony, just the driver files for Atheros, I can't do a restore point since I don't have any from before the problem. I have searched everywhere for a working solution but haven't found anything yet. I would like to avoid sending it in.....it's still under warranty but I don't have a Sony store near me and I'm gonna be going out of town in a couple weeks..
I bought a new hard drive but toshiba said it isn't formatted correctly and now my drivers don't load
View 1 Replies View RelatedI am having issues with the atheros ethernet, when I try to update drivers I get the following "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
View 1 Replies View RelatedOk so I recently moved from vista to windows 7 and everything is great except that about 40% of the time when I restart my computer, the mousepad and video card drivers don't load up. The mousepad stops responding and the resolution goes to 800x600. When I look in device manager those two drivers say they failed to initialize and need a restart, I will post the exact error messages soon. Then when I restart everything runs fine. But this consistently happens, I believe it happens everytime I install something new and then restart. I can't figure out how to stop this from happening, anyone know what to do?
View 4 Replies View RelatedIm running into a very strange situation.
Im running 7 Ultimate on a Lenovo 3000 N100 Laptop that I use for work.
Originally I had the RTM that i revieved from work (HP). Once 7 was released to the public I purchased the Ultimate anytime Upgrade to make my copy of 7 my own. Here is my issue, With the RTM installed I had no problems. But once I entered my new key I started having boot problems.
Every other boot, when I get to the login screen It seem that my graphics driver and my touchpad driver did not load and I must shut down and reboot.
when I reboot it then works fine. i have done a Fresh Install 3 times,
Downloaded updated drivers for my chipset, graphics, and touchpad. Could it be a BioS issue?
I was wondering if anybody has ever encountered this or knows how to remedy this.
I have a new monitor, and also a new USB to RS 2343 converter cable that both came with a CD that apparently has Drivers for the devices on them.
They don't start automatically in auto-play to load, and my reading of the file labels in the CD makes no sense to me.
So, with the CD in the drive just sitting there, what do I do to actually get the PC to recognize the Drivers in the Folder(s), and load them in the appropriate places ?
How to Load SATA Drivers in Windows System Recovery Options ?
View 0 Replies View Relatedi cant load the drvers (dell printer all in one 962) on my windows 7 laptp. dells web site dont have them'
View 2 Replies View Related