I got a question for you maybe you can answer for me. I have a single 1terabyte sata drive with windows 7 on it. I used to have Windows xp pro on it but i upload Windows 7, i just delete the "old windows" that Windows 7 left me. Now i have accumulated alot of files in my documents file which i use for video purposes which take up about 530 gigs.
i can't wipe my hard drive clean to install the new update rc which i recieved as a beta tester. Is there any way to partition the drive only where Windows 7 is at leaving my 530 gigs in a seperate partition so that i can install dual os's. The two os's will be Windows 7 rc and Xp Pro. the only reason i made the switch is because i built my new computer with 4 gigs of memory running core 7 processor but xp only sees 3 gigs.
I am looking to use my 1TB seagate SATA II drive for my Windows 7 installation, and was wondering how I should go about partitioning it and how large each partition should be or what I sould put on each partition.
My system will be used for the following:
Computer Games that take up a lot of space (World In Conflict, Empire Total War, Battlefield 2, Call of Duty, etc.)
Music
Video files/ recordings (I have a Hauppauge tv card)
Some Photos
Basic apps like office
Data files
Which of the above items should I put on the OS partition, and which should get their own partitions? How large should the OS partition be compared to the other partitions? Seperate partition for games?
Having one giant drive might be nice to try, but then I would have no where to put my excess video files if I ever needed to reformat. The 1TB drive accomodates whatever video files I can't store on my 2 smaller drives and currently has 120 GB of video on it.
In addition to my 1TB drive, I also have 2 more internal drives, a 250GB Maxtor ATA which is filled with video files and a 200GB WD SATA that I use for my TV card and storing the recordings I make until I have a chance to edit them or move them to a differet drive.
I have a seperate 250GB external drive for backing up data files and music, so the backup issue is taken care of.
I have a HP m7667c, which has two SATA drives. The motherboard is ASUS P5BW-LA (or Basswood-UL8E). I've never successfully installed vista before because of it kept asking for SATA drive. I wonder if there is a solution for this problem with Window 7?
I think I have RAID on in the BIOS configuration but I don't really want to turn it off because in that way my old WinXP would die. I just wanted to give Windows 7 a try before I completely change to it. Could anyone help me? I could provide more information about the desktop if necessary.
I am running XP on a SATA HDD. I have installed Win 7 on a second partition with some problems. The main problem was random BSOD's. This I believe, I have traced back to the fact that the MoBo runs Nvidia chips. Have downloaded the updated Nvidia Win 7 chip drivers. So, I uninstalled Win 7 and removed boot loader via BCDEDIT.
What I would now like to try is to install Win 7 on a separate IDE HDD connected to the primary IDE controller. This is so I can sort out the Nvidia driver problem.
I can see problems with this. My questions are the following: What will I set the IDE HDD to be, Master or Slave? Then boot off DVD/ROM and then install Win 7 as normal onto IDE HDD. If yes, I take it that the Windows 7 bootloader will not be installed on the XP SATA HDD. If this is the case then I should be able to use EasyBCD to add the XP on the SATA HDD. Most critical part of the whole deal will be to set the SATA HDD (with XP) to boot FIRST. I have been down this track before and the MoBo sets the IDE as Drive 0 (FIRST boot HDD).
I know that there is a simple answer to this. I just cannot see the forest for the trees at present.
I built a new computer. Rather expensive, but it should perform well. -Anyway-, I bought a brand new hard drive with the expectation of installing windows 7 on it and then working from there. The hard drive is recognized in the BIOS, the CMOS, and anything at all I've checked, but when I put the windows 7 64 bit disk in and try to do a custom install, seeing as I have nothing on the disk from which to upgrade, my hard drive does not show up in the section in which 7 asks where I want to install.
Motherboard is GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard, hard drive is Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive.
The hard drive is plugged into the top SATA port (It has like, 10).
i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?
Intel D975XBX2 Marvell SATA driver needed for Windows 7
Installed Windows 7 (62 bit) onto Intel D975XBX2 ATX Motherboard.
I can not get windows to recognize the SATA drives attached to the internal Marvell card.
BIOS see the drives, just not windows.
Attempted to install both Windows XP 64 and Vista 64 Intel drivers (STOR_allOS_8.7.0.1007_PV), but the install fails with "system does not meet the minimum requirements)
My disk crashed and had to reload everything, I took it to Toshiba service center. Before the crush my hard disk was just one big physical disk now I have: C: physical 150.84 GB(boot, page file, crush dump, primary partition)If so can you please tell me how to do it, never done this before, partitioning, and I don't want to make a mess out of it.
I've got a 320GB drive on a Vista Premium Home notebook.
Few user files are actually on the notebook, rather the files are on my desktop, and are processed via the network, or temporarily copied to the notebook.
Currently, C drive is 285.04GB with 246GB free.
HP's recovery partition is 13.05GB, with 2.4GB free.
I am going to shrink the C drive, so I can add a separate partition for my own files, this partition could be shared with Windows 7.
How much space should I leave for Windows 7 Home?
I would end up with the following partitions:
C: For Vista
H: For Howard's files
W: For Windows 7 Home
Unallocated: Likely 32GB, in case I wish to add Ubuntu Linux.
D: Recovery partition for HP. I use image backup so this is not really useful.
I have two opreating system installed but in drive D win xp was not working therefore i tried to installed the win xp in drive D and i have already installed a win 7 in Drive C and i encrypt the drive E, F with Bitlocker ..when i install the win xp then win 7 was not reachable and not work correctly then i again installed the win 7 in drive C and want to partition the drive E,F then there was a problem created while in partitioning because i forgot the un encryption of these drives.
There was a time when I had Windows 7 and absolutely adored it.
For certain reasons I tried to go back but fail epically (yes, I'm a teenager!) and now I have two active drive partitions and it's still looking for Windows Seven's bootmgr.w/eand now I need either one of four questions answers so I can get back on my new computer. [(BTW, I am starting to hate the way I need to tweak things.)]
The questions are:If I install windows seven on my usb flash drive (which I tweaked to make the computer look at it like a USBHDD,) will it wipe out the OS on my grandpa's computer? How can I make BIOS look-up and process boot.ini instead? How can I run the Windows Vista install off my FlashHD [as I call it. :P]Is it even possible? Would it work better or, once again, is it possible to install Vista on my flash drive and use it to run on my grandpa's computer. My computer is an Acer AspireOne [I will deservingly accept flaming due to my poorness and poor sense of choice].
i have a question about partitioning a 2TB external hard drive that is formatted for 1.8 TB, i would like to partiotion it into (2) 500G partitions and whats ever is left as another partition, i dont remember how to go about doing it, if i think i remember correctly, i have to delete the partiotion first ( there is not data on it at the moment ) then partition the drive as stated above, i will be using partition home wizard 6.0, also, cant i just "resize the 1.8TB drive to what i want ?. or is it better to delete it and re partion the drive
i bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
I have a 1tb HD and I want to partition it to install another operating system. There is no "unallocated space". How do I go about making my partition?
I have 4 physical hard drives, 2 of them are 150GB and 2 of them are 1000GB. Both are mirrored at the pre O/S level in order to provide redundancy. On the 150GB mirror I installed the host operating system (Win Server 2008 R2 with Hyper-V) and the 1000GB mirror is just a Data drive. I've created my Virtual server in Hyper-V and allocated it 500GB from the 1000GB mirror. When I start up the virtual Server in order to install the o/s I will be asked whether to partition this "Virtual hard drive" i.e., have a C: drive for the virtual o/s and a d: drive for the virtual data. Of course they would be on the same physical disk anyway so should I bother partitioning the Virtual 500GB drive.
I just partitioned my external 3.0Tb hard drive using the device manager in Win 7. At first I had one partition of around 2.8Tb, I shrunk the existing partition to around 1.9Tb and then Windows created 3 partitions instead of 2. I ended up with 1 partition of 1.9Tb, 1 partition unallocated of around 100Gb and a 3rd partition of 746Gb unallocated. I was then able to create a simple volume on the 100Gb partition which left me with the 746Gb partition unallocated. When I try to format the 746Gb partition all the options are greyed out - I cannot create a simple volume or delete the partition. I also cannot extend my other 2 partitions to use the unallocated space. When I delete the 100Gb partition I can then extend the 1.9Tb partition and end up with a 2Tb partition and the remaining 746Gb unallocated. Is there any way to recover the 746Gb of unallocated space? Seems a waste to have a 3Tb drive that only has 2Tb of useable space.
I created a partition and installed XP on it and the game installs correctly (installation wouldn't even start on Win7) and it runs. However, the drivers I got when I bought the laptop are only compatible with Win7 (video drivers, wifi/lan drivers, the audio driver works fine on XP however).Because of this driver problem, I have no graphics driver to run the game (I know it works because I can start the game and hear the audio). I also couldn't connect to the internet to find and update drivers on that specific machine.
So I searched for them on another computer but after hours of searching, downloading and transferring the files to my Acer, failed to find any compatible with XP.The Acer website which I downloaded these drivers from mentions they work on XP in the description but they wouldn't install, giving the error 'not support on this operating system' or similar.FYI the hardware for the drivers I needed were: - Lite-on Wireless LAN 3rd WiFi BGN Atheros HB97 (OR Broadcom LAN BCM57780 for ethernet connection)- Intel VGA Chip UMAHas
I recently built a computer with only one drive, I was wondering if it is possible to install another one and have them runing on raid 0 or do you suggest another type of raid maybe with 3 drives.
I have an asus mobo p5q3 so I can use Drive Xpert technology but a lot of reviews says that the speed of the drives is split in two when using these 2 sata connection (white and orange).
Since the time I have purchased my laptop, I have a single C Drive of 288GB (the specs say 320 GB). Now I'm planning to install Windows 8 beta (in future) on my system without losing my data.Will creating a partition of my disk I want to have two drives. One just for the OS and the other for my files, so that whenever I want to install a new version of Windows, I just need to format one drive without the loss of any data.
Is it possible to take an exising backup of a single drive,and restore it to a newly created raid 0? As in, I have a 64gb SSD, it's backedup. I want to get another 64gb SSD,Will I have to re-install everything or can I just restore the backup and let windows find the proper drivers ?
We have two disks in raid 0. We want to get rid of them, as they are failing and install a single hard drive with Windows 7. We currently have Vista installed. There are no files I need to copy, just want to start with a fresh operating system. How do I go about this? Can I just remove the old hard drives and replace with the single hard drive and install Windows 7 on it, or is it more complicated than that?
Have XP on C drive and looking to install Win 7 on 2nd Sata drive for dual boot. However, when installing a 2nd Sata drive my XP bios identifies it correctly as a Sata drive but my PC Disk management recognises it as a Removeable disk preventing me from installing Win 7. I have tried a couple of different Sata disks with the same result.
I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
I need to reinstall my Windows 7 from cracked to legal. My PC has 3 HD in it. 200 GB SATA, 200 GB Primary IDE and 160 GB Secondary IDE. It is currently loaded on the 200gb Primary IDE and the other 2 are for backup and saving data. Would I be better off installing Windows 7 on the SATA drive and using both IDE drives for backup and saving data? If so is the easiest way to just disconnect the IDE drives until Windows 7 is installed then format the original OS drive to use for backup?
Having just bought a new PC i was left with a perfectly good SATA HDD which I intended for use in backups. The drive seemed to work ok until it cane to backing up! The drive was 320gb but when trying to back up it shows as only 47gb (not much good for a full backup).
Before I made the commitment to use Windows 7 as my primary OS, I figured I'd experiment in a dual boot environment. My current setup is Windows XP (x32) installed on a 500GB SATA drive. This drive has a partition for the OS and a separate partition for all of my files and data. To install Windows 7 I removed my SATA drive and (successfully) installed Windows 7 (64-bit) onto an 80GB IDE drive (controller 0, disk 0).
After the installation I shut down my system, reconnected my SATA drive, changed the BIOS boot order to look at my IDE and Windows 7 booted without a hitch. My motherboard is a Gigabyte GA-K8U-939
Now, with Windows 7 running and my SATA drive connected, Windows 7 does *not* recognize the drive. It is completely missing from the disk manager. I loaded the drivers for my motherboard ((however since the MoBo is a couple years old, it doesn't have Vista or Windows 7 drivers)), it loaded quasi-successfully but spat out some error about it not being totally successful. Now, after I log into Windows 7 I receive an error that goes like,
Code: Initial ALiRAID error!!Please Check:
1) ALiRAID driver is installed 2) ALiRAID controller is connected to disk drive(s)
When I reboot my computer and switch the boot order in the BIOS to boot from my IDE drive, my system will boot into Windows XP without any problem at all. I've also switched the BIOS setting from "RAID" to "IDE" for the SATA drive and that appears to have done nothing towards Windows 7 being able to access it.
There's gotta be some way to get Windows 7 to see my SATA drive, doesn't there?
I have installed windows 7 ultimate x64 and i am really impressed by it.
but i have a question for you, i have a second 500 gb sata hard drive which i have connected after the install which is formatted with ntfs file system from my original windows xp o/s , it shows up in device manager but will not work , windows ask me to format the drive which i dont want to do because has loads of files on which i dont want to lose.
am i missing something they both use the ntfs file system .
