I've got a 320GB drive on a Vista Premium Home notebook.
Few user files are actually on the notebook, rather the files are on my desktop, and are processed via the network, or temporarily copied to the notebook.
Currently, C drive is 285.04GB with 246GB free.
HP's recovery partition is 13.05GB, with 2.4GB free.
I am going to shrink the C drive, so I can add a separate partition for my own files, this partition could be shared with Windows 7.
How much space should I leave for Windows 7 Home?
I would end up with the following partitions:
C: For Vista
H: For Howard's files
W: For Windows 7 Home
Unallocated: Likely 32GB, in case I wish to add Ubuntu Linux.
D: Recovery partition for HP. I use image backup so this is not really useful.
My disk crashed and had to reload everything, I took it to Toshiba service center. Before the crush my hard disk was just one big physical disk now I have: C: physical 150.84 GB(boot, page file, crush dump, primary partition)If so can you please tell me how to do it, never done this before, partitioning, and I don't want to make a mess out of it.
I have two opreating system installed but in drive D win xp was not working therefore i tried to installed the win xp in drive D and i have already installed a win 7 in Drive C and i encrypt the drive E, F with Bitlocker ..when i install the win xp then win 7 was not reachable and not work correctly then i again installed the win 7 in drive C and want to partition the drive E,F then there was a problem created while in partitioning because i forgot the un encryption of these drives.
There was a time when I had Windows 7 and absolutely adored it.
For certain reasons I tried to go back but fail epically (yes, I'm a teenager!) and now I have two active drive partitions and it's still looking for Windows Seven's bootmgr.w/eand now I need either one of four questions answers so I can get back on my new computer. [(BTW, I am starting to hate the way I need to tweak things.)]
The questions are:If I install windows seven on my usb flash drive (which I tweaked to make the computer look at it like a USBHDD,) will it wipe out the OS on my grandpa's computer? How can I make BIOS look-up and process boot.ini instead? How can I run the Windows Vista install off my FlashHD [as I call it. :P]Is it even possible? Would it work better or, once again, is it possible to install Vista on my flash drive and use it to run on my grandpa's computer. My computer is an Acer AspireOne [I will deservingly accept flaming due to my poorness and poor sense of choice].
I am looking to use my 1TB seagate SATA II drive for my Windows 7 installation, and was wondering how I should go about partitioning it and how large each partition should be or what I sould put on each partition.
My system will be used for the following:
Computer Games that take up a lot of space (World In Conflict, Empire Total War, Battlefield 2, Call of Duty, etc.)
Music
Video files/ recordings (I have a Hauppauge tv card)
Some Photos
Basic apps like office
Data files
Which of the above items should I put on the OS partition, and which should get their own partitions? How large should the OS partition be compared to the other partitions? Seperate partition for games?
Having one giant drive might be nice to try, but then I would have no where to put my excess video files if I ever needed to reformat. The 1TB drive accomodates whatever video files I can't store on my 2 smaller drives and currently has 120 GB of video on it.
In addition to my 1TB drive, I also have 2 more internal drives, a 250GB Maxtor ATA which is filled with video files and a 200GB WD SATA that I use for my TV card and storing the recordings I make until I have a chance to edit them or move them to a differet drive.
I have a seperate 250GB external drive for backing up data files and music, so the backup issue is taken care of.
i have a question about partitioning a 2TB external hard drive that is formatted for 1.8 TB, i would like to partiotion it into (2) 500G partitions and whats ever is left as another partition, i dont remember how to go about doing it, if i think i remember correctly, i have to delete the partiotion first ( there is not data on it at the moment ) then partition the drive as stated above, i will be using partition home wizard 6.0, also, cant i just "resize the 1.8TB drive to what i want ?. or is it better to delete it and re partion the drive
I got a question for you maybe you can answer for me. I have a single 1terabyte sata drive with windows 7 on it. I used to have Windows xp pro on it but i upload Windows 7, i just delete the "old windows" that Windows 7 left me. Now i have accumulated alot of files in my documents file which i use for video purposes which take up about 530 gigs.
i can't wipe my hard drive clean to install the new update rc which i recieved as a beta tester. Is there any way to partition the drive only where Windows 7 is at leaving my 530 gigs in a seperate partition so that i can install dual os's. The two os's will be Windows 7 rc and Xp Pro. the only reason i made the switch is because i built my new computer with 4 gigs of memory running core 7 processor but xp only sees 3 gigs.
i bought a laptop and it had one drive C(OS) with 450 gb. i want the c - drive to be partitioned further 2 drives(D and E). will i able to do that ,if so please send me steps or screen shots. i followed the below steps, i partitoned using Shrink volume in Disk management and i aplit the drive as
I have a 1tb HD and I want to partition it to install another operating system. There is no "unallocated space". How do I go about making my partition?
I have 4 physical hard drives, 2 of them are 150GB and 2 of them are 1000GB. Both are mirrored at the pre O/S level in order to provide redundancy. On the 150GB mirror I installed the host operating system (Win Server 2008 R2 with Hyper-V) and the 1000GB mirror is just a Data drive. I've created my Virtual server in Hyper-V and allocated it 500GB from the 1000GB mirror. When I start up the virtual Server in order to install the o/s I will be asked whether to partition this "Virtual hard drive" i.e., have a C: drive for the virtual o/s and a d: drive for the virtual data. Of course they would be on the same physical disk anyway so should I bother partitioning the Virtual 500GB drive.
I just partitioned my external 3.0Tb hard drive using the device manager in Win 7. At first I had one partition of around 2.8Tb, I shrunk the existing partition to around 1.9Tb and then Windows created 3 partitions instead of 2. I ended up with 1 partition of 1.9Tb, 1 partition unallocated of around 100Gb and a 3rd partition of 746Gb unallocated. I was then able to create a simple volume on the 100Gb partition which left me with the 746Gb partition unallocated. When I try to format the 746Gb partition all the options are greyed out - I cannot create a simple volume or delete the partition. I also cannot extend my other 2 partitions to use the unallocated space. When I delete the 100Gb partition I can then extend the 1.9Tb partition and end up with a 2Tb partition and the remaining 746Gb unallocated. Is there any way to recover the 746Gb of unallocated space? Seems a waste to have a 3Tb drive that only has 2Tb of useable space.
I created a partition and installed XP on it and the game installs correctly (installation wouldn't even start on Win7) and it runs. However, the drivers I got when I bought the laptop are only compatible with Win7 (video drivers, wifi/lan drivers, the audio driver works fine on XP however).Because of this driver problem, I have no graphics driver to run the game (I know it works because I can start the game and hear the audio). I also couldn't connect to the internet to find and update drivers on that specific machine.
So I searched for them on another computer but after hours of searching, downloading and transferring the files to my Acer, failed to find any compatible with XP.The Acer website which I downloaded these drivers from mentions they work on XP in the description but they wouldn't install, giving the error 'not support on this operating system' or similar.FYI the hardware for the drivers I needed were: - Lite-on Wireless LAN 3rd WiFi BGN Atheros HB97 (OR Broadcom LAN BCM57780 for ethernet connection)- Intel VGA Chip UMAHas
In a few days I will be upgrading from my AMD 965 Black and Gigabyte GA-870A-UD3 to an Intel i5 2500k and GIGABYTE GA-Z68XP-UD4. I was curious as to what you all thought I could do to minimize effort and problems restoring my system settings, programs, and data files after a clean install of Windows 7.I currently have 3 HDDs; A 640GB for my OS (C: ), a 1TB for Programs and User files (D: ) (Pics, Docs, DVDs, etc.), and a 500GB (E: ) for Win7 backups. I also have a NAS (\NAS) with 500GB. At this point I have good User File backups on E: and am now creating IFW drive images of C: and D: onto the NAS. I have also generated reports from SIW (Hardware, Software, and Network) and Win7's System Settings from the Advanced Tools control panel.
I purchased a Toshiba NB-205 netbook a while back (why did I do that again?) and now I'm trying to prepare it for selling on ebay.Now, I did have it sent to me originally with Windows 7 Starter (again, why starter? xD) instead of XP which will boost its value in my opinion, but I have some problems:
1) My netbook did get some virus which I can't remember what it's called but it basically tries to imitate Norton anti-virus into making me purchase some crapware that doesn't even exist or something like that. Anyway, I couldn't really remove it, and it's one of the reasons I ultimately decided I want to just reformat and sell. Also just to get some extra cash
2) I was wondering how I could eliminate the virus by reformatting perhaps? But I still would like to keep Windows 7 on it if possible... If not possible, it would be better to advertise no software than Virus-ridden so I guess if I can't keep 7, I'll just reformat.
i trying to install windows 7 Ultimate 32Bit on Adaptec aha-2940 UUW SCSI Bios Windows installation to the stage (installing updates) will continue But when the stage (complete Windows installation) is the following message appears: ''windows could not prepare the computer to boot into the next phase of installation.to install windows restart the installation"
Like 3 weeks ago the smarthdd malware affected my computer. The one where all your icons, files, etc. are hidden, gives you bogus security alerts, and then turns off the PC. Using support from the web with Rkill, MalwareBytes, and Hitman Pro. I eliminated the problem. While I thought I had recovered the computer I was wrong. Probably a day later I notice regedit would start when the computer was started and a few seconds later the computer would turn off. After turning on the computer a few times, the problem was gone. MSE is turned off. I tried to turn it on but it wouldn't turn on, saying the system needed to restart.
I also notices the computer would notify that Windows Update was also turned off and can't turn it on or download any updates (error: windows update cannot currently check for update, because the service is not running. You may need to restart the computer). Also, when I click the Nvidia settings icon, the computer does not detect video graphics hardware. I checked around a forum and I saw someone having the same problem and was advised to set BITS service and Windows Update service to start automatic. But when I check the services.msc, those services are gone. Also, I noticed that in the Device Manager, in System Devices, 2nd Generation Intel Core processor family PCI Express controller - 0101 has a yellow triangle sign on it.
On properties, it has this status: "Windows cannot initialize the device driver for this hardware. (Code 37)". So I try uninstalling MSE and installing it again, but the problem persist there. I run several scans with different anti-virus/malare and while I do find a few malwares, fixing/deleting/quarantined them haven't solved the problem. Yet, one antivirus (eset nod) wouldn't install, after many tries when it got to a driver install stage. I also try windows fix it, but nothing was solved. Also tried kapersky TDSSkiller, and nothing was solved (though when initializing, it gives an error saying that 'Can't load driver", yet it continues initializing).
So then I tried chkdsk /r in the command prompt, but it throws off an error in the second stage, restarting the scan again continuously until I decide to skip the scan. Finally I decided I had enough and tried a repair install, but after the stage where it check the programs and settings, I get the error "windows could not prepare the computer to boot into the next phase of installation". Then out of resignation I tried doing a clean install, but it gives me the same error. Later ran sfc /scannow on command prompt, and the log said that it couldn't repair DDORes.dll. So then what I did was replace DDORes.dll with one from installation disk.
Nothing was solved, and sfc scan still gives me that DDORes.dll is corrupted and can't be repaired. Later I tried upgrading the Intel graphics driver and the Intel Display Audio Driver. After rebooting the resolution of the laptop changed from 1366 X 768 to 800 X 600 as default, and now i can't increase it over 1024 X 768. Device manager shows that now both the Intel HD Graphics 3000 and Intel Display Audio cannot start due to error: "Windows cannot initialize the device driver for this hardware. (Code 37)" Or any way to at least clean install the OS so I can get rid of this problems?
I am trying to install Windows 7 after getting attacked by some virus. So formatted the system C Drive. Now there is no OS. When i tried booting it from a bootable Windows 7 DVD, it gets installed almost, expanding files -- 100% but at the end i receive this wierd error."Windows could not prepare the computer to boot into the next phase of installation.To install Windows, restart the installation."
I've got a Gigabyte GA-EP45-UD3P mobo, and am trying to do a clean install of the Windows 7 trial edition. I was getting access errors, so after moving my memory around, and trying different sticks, I've come to a configuration which is getting me through that problem, but I've reached another problem.After the fourth step(I believe they are "Copying files, expanding files, installing features, installing updates"), the computer hangs for a minute or so then gives me the error message "Windows could not prepare the computer to boot into the next stage of the installation. To install Windows, restart the installation."I've retried this three times to no avail, and googled the problem, but the majority of the answers I am finding for this are for people upgrading from Windows Vista
I am new to windows 7. Recently i bought a laptop with windows pre-installed in it.
I have a HD drive of 500gb. Windows is already preinstalled on it. I Want to partition the drive without affecting any data. I loaded some 30 gb data already on the drive. I want to partition the 450gb drive into 3/4 drives each of 100gb, such that i can allocate the Os with a drive and remaining 2/3 with my personal data songs, movies...etc.
I want to partition the drive and I don't know how??? Can anyone please explain me step by step how to do it. The main point here is do i need to again reformat the whole drive such that before re-installing Windows 7 i can partition it (or) do i have any alternate solution such that while running windows I can partition the current drive without affecting any data other than system files.
I have a 2 partition disk split: C:Windows 7 & E:data . I want to sneak in a partition at the start of E: to hold XP os and thus "F:" becomes my new data partition. Shrink as far as I know will create a space after the currently existing E:. The added problem is I am only playing with a small drive and cannot just copy over the data.
One day I booted up my comp & My HDD was Partitioned into 2 Parts. My C: Drive Also my Boot Drive has Windows 7 on it while The other Half of my HDD My F: Drive has all my files on itI was wondering how I could Merge these to Together without hurting or losing anything on my comp?
I currently have a dual boot system of XP and 7. Xp was the first installed os. After partitioning Windows 7 was added and made the default os.
I now want to get rid of XP and reallocate the space to Win 7. I have assumed that I can do this from within Win 7 using Disk Management. From win 7 the partition for win 7 appears as C: and for Xp its D: And likewise from XP the partition for XP is C: and 7 is D: (if you follow what I mean).
Now when I try to delete the XP partition from Disk Management it does not give me the option to do so (the option is greyed out). Is there a way around this? If not I may as well just wait until I get the retail copy of 7. I am going to presume that the mbr is most likely to be on the XP C: drive? as that was the os installed initially.
After all the trouble that I went to remove the old partitions on the HD in my secondary rig, I forgot to disconnect a second HD installed, and after going through a number of other repairs just before starting the installation, I wasn't thinking clearly and deleted the partitions that I had made with the HD installed on my primary rig.
Attempting to recreat the partitions with the installation procedure got things even more messed up because I didn't find any facility for actuallyt creating a partition of the size that I wanted, only a format function, which I assumed would format the entire drive, or as I did, click Next, hoping to find something more in the next screen, but it then just started the installation itself, and took the entire drive, except a 100MB partition that it also created for the system reserved functions.
Not being in the mood to once again remove the harddrive back to my primary rig for prep, I let it continue the installation, because it would not permit me to delete the partitions that it had made. I'm hoping that I can resize the main partition after the install completes, but if like when I installed the x32 bit version in this manner, it scattered files across the partition in a fashion that would make it difficult to do so.
On my primary rig, I have the entire OS installed on one neat 100GB partition, and that is what I want here also. I'm trying to decide whether to nuke the HD again, or finish the installation and attempt to customize it afterward. Which would be better?
i just got a new 320gb hard drive for my thinkpad and installed it with no problems, and then did a clean install of windows 7. everything is working fine, but i'm wondering about setting up partitions and backups.
i back up my files to an external hard drive every couple weeks or so. i don't have anything set up on my laptop, though.
should i set up a partition on my laptop to create a backup?
how big should the partition be?
can i set it up even though i've already installed and formatted the drive?
I have windows 7 ultimate installed on my dell Inspiron N5010 machine.I had a preinstalled windows 7 home basic.I have currently 4 partitions:OEMRecovery 1 Primary partition with aorund 250 GB1 extended partition with 2 logical drives.Whats My Problem??Out of the free 225 GB , the maximum available shrinked space available is 128 gb (thats is understable ,due to unmovable files ~hibernation files etc).I shrinked it to maximum capacity to create a new unallocated space of 128 gb.But when I tried to create a simple volume, it gave me an error~You cannot create a new volume in this unallocated partition beacause the disk has already maximum number of partitions.I guess,out of the permissible 4 partitions in disk management without using any 3rd party software,I have used it all.And when I tried to create a new simple volume, it is creating another partition.Real Problem:How to create a logical drive from primary partition??PS:I tried PM, but it gave me a launch error.
the Disk Management program can't manage (extend/shrink/etc.) FAT32 partitions.I don't wish to format NTFS and extend/shrink/etc. an NTFS partition, I want to maintain and alter a partition in FAT32, because my older computer can't read NTFS partitions, and I want it to recognize a partition on this external drive.is there a third party program that works on Win 7 which can give me this ability?alternatively, can the "exFAT" system offered in Disk Management be read by WinME, or is it quite different to FAT32?
I recently enountered siginificant incompatibilities using Partition Magic in Windows 2000 creating a dual boot Windows 2000/Ubuntu Linux system.
I realize that PM must not be used in Vista or Windows 7.
I am planning on having two Windows 7 systems as follows:
1. Dual boot Windows XP Pro/Windows 7 Pro.
2. Dual boot Windows Vista Home Premium/Windows 7 Home.
For the XP system, I could format the partitionss using Partition Magic, run from XP, but if I later wish to add a Linux partition. I'd likely have the same problem I desctibed in the link supra.
For the Vista system, I could format the partitions using Acronis Disk Director 10, run from Vista. Again, this might be complicated by using Disk Director, I do not yet know.
So, what partitioning software is required for the following cases:
1. Dual boot XP/Windows 7
2. Dual boot Vista/Windows 7
3. Triple-boot XP/Windows 7/Ubuntu Linux.
4. Triple boot Vista/Windows 7/Ubuntu Linux
I am asking this same question in a Vista and in an Ubuntu forum.
I know I have did this when I was installing Win 7 and was able to have Win 7 do the partitioning. If possible can some one tell me the screen where i can get into the partitioning phase. I can't find it again to save my life.
I have a Toshiba laptop with 2 partitions- One with windows vista on it and one for backups. I want to join the two partitions and use the Windows 7 Upgrade pack and do a clean installation. How would i go about joining the two partitions? Am i able to use the upgrade version to install it?