Can Do FAT32 Partitioning On Windows 7

Oct 28, 2010

the Disk Management program can't manage (extend/shrink/etc.) FAT32 partitions.I don't wish to format NTFS and extend/shrink/etc. an NTFS partition, I want to maintain and alter a partition in FAT32, because my older computer can't read NTFS partitions, and I want it to recognize a partition on this external drive.is there a third party program that works on Win 7 which can give me this ability?alternatively, can the "exFAT" system offered in Disk Management be read by WinME, or is it quite different to FAT32?

View 5 Replies


ADVERTISEMENT

Backup A FAT32 Usb Drive In Windows 7?

Aug 17, 2010

got my new PC with Win7 64bit.I work from home and have all my work related correspondence on an external drive secured by Truecrypt. I used to back this up nightly with Vista without problem, but now I find that Win 7 won'tlet me.Does anyone know a way around this, or software that will do it

View 3 Replies View Related

FAT32 External Connect To Windows 7 64bit

May 4, 2011

I just ordered an external enclosure for my 3.5 80GB HDD, which is a FAT32 drive with all my old MP3's on it.What I was wondering is , of course, will it run, by USB, in my Windows 7 64bit environment......or can I at least pull the files off of the FAT32 HDD and somehow put them on my Windows 7 64bit system?

View 2 Replies View Related

How To Convert A Fat32 To NTFS To Upgrade To Windows 7

Feb 21, 2011

How do I convert with command prompt comes up CDocumenand Settings/charlie> and not just C:?

View 5 Replies View Related

Can't Format FAT32 HD With NTFS

May 9, 2011

I have a second hard drive that is formatted FAT32 and I need to reformat it to NTFS so I can install Windows XP as a dual boot option. It shows 146GB of 148GB free space; however, when I open the drive it says "This folder is empty". I once had Ubuntu installed and reformatted the drive, but it may be hidden somewhere on the drive. I have tried to reformat by right clicking the drive letter and using the format command, but I get an error message "Windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure no window is displaying the contents of the drive. Then try formatting again.". When I check the drive for contents using CMD it says "Volume in drive is New Volume Directory of D: File Not Found". When I try to format D: from the C: prompt, it says "Access Denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode." I am logged on as Administrator

View 6 Replies View Related

Can't Convert FAT32 To NTFS?

Apr 29, 2012

I keep trying chdsk f: /f and it says its clean and fixes errors and then I go to Convert F: /FS:NTFS and it says I need to do chdsk

View 9 Replies View Related

Mount C:Users As A Fat32 Partition

Aug 24, 2010

I'm planning on placing my C:Users folder on a separate partition of my HDD. I know the general scheme of things would be to create the separate parition, we'll call it D:. and then robocopy everything from C:Users to D: and delete the contents of C:Users before mounting D:Users.

Does anyone have any clue what to do if I want D: to be a FAT32 partition? Will I run into trouble because of permissions from the NTFS partition that Users originally resided on?

View 9 Replies View Related

Convert FAT Or FAT32 Volume To NTFS

Nov 20, 2009

How to Convert a FAT or FAT32 Volume to NTFS in Windows 7 ?

View 0 Replies View Related

External Hard Drive Fat32 To NTFS?

Oct 8, 2012

Well tomorrow I am receiving my SSD. And my external hdd is fat 32 and I can't backup some of my stuff because of the file size limit. I believe I need it to be NTFS but how do I change it from fat32 to NTFS?

View 9 Replies View Related

Formatting Flash Drives NTFS And FAT32

Apr 20, 2009

I have a couple of flash drives I have formatted to NTFS. One for an install drive and one for a readyboost test. If I formatted the drive in CMD do I have to format it the other way (to FAT32) in CMD or can I just right click the flash drive and format it there?

View 3 Replies View Related

Possible To Change External HD File System From NTFS To FAT32?

Nov 4, 2011

I am using windows 7 65 bit sp1, I have a number of films on pc of granddaughter and to save putting them onto DVD I have put them onto an external HD which is NTFS, I have tried to link it up to my freesat box which has a usb port, TV hasn't, unfortunately the box wont accept the NTFS sile system, have tried changing to exFAT, again this isn't accepted, tried friends ex HD which is FAT, (FAT32)? and this works, can I change my ex HD to then old FAT system?

View 6 Replies View Related

Deleting A Corrupt/unreadable File On A FAT32 Drive

Mar 10, 2012

I've got a corrupt file on my TomTom ONE Third Edition. TomTom support has been unhelpful, and Google has let me down for the last 2 hours. I've tried programs like ChkDsk, Move On Boot, Unlocker, and FileASSASSIN.

I am running Windows 7 Ultimate, and the file that needs to be deleted is ttsystem.

View 12 Replies View Related

Disk Partitioning In Windows 7

May 24, 2011

I have windows 7 ultimate installed on my dell Inspiron N5010 machine.I had a preinstalled windows 7 home basic.I have currently 4 partitions:OEMRecovery 1 Primary partition with aorund 250 GB1 extended partition with 2 logical drives.Whats My Problem??Out of the free 225 GB , the maximum available shrinked space available is 128 gb (thats is understable ,due to unmovable files ~hibernation files etc).I shrinked it to maximum capacity to create a new unallocated space of 128 gb.But when I tried to create a simple volume, it gave me an error~You cannot create a new volume in this unallocated partition beacause the disk has already maximum number of partitions.I guess,out of the permissible 4 partitions in disk management without using any 3rd party software,I have used it all.And when I tried to create a new simple volume, it is creating another partition.Real Problem:How to create a logical drive from primary partition??PS:I tried PM, but it gave me a launch error.

View 5 Replies View Related

Partitioning Programme For Hdd With Windows 7?

Mar 26, 2011

is there a partitioning programme for my hdd with windows 7 on it

View 6 Replies View Related

Multibooting And Partitioning In Windows 7

Jun 28, 2011

I only have one try to install Windows, I want to make sure I know exactly what to do. First of all, which do I install first? Does it matter? Do I have to create the partitions for both when I install the first one?.What I'm going for is a W7 partition used almost solely for Maya (a little gaming too) and a Linux partition for literally everything else.

View 1 Replies View Related

Windows 7 Home Basic Partitioning

Dec 1, 2010

I've installed Acronis Disk Director Suite and in manual mode I've started to create a new partition. My notebook had 3 partitions: main partition of ~300Gb with Windows installed, unknown "System" partition with "boot" flag of ~1.5Gb and recovery partition of ~8Gb. So I tried to create a new partition using the free space from the first one. After rebooting Acronis started to work, created a new partition and started to replace "HDDRECOVERY" partition. During this process, notebook had been shutdown (it was plugged into the socket) and after turning on, I noticed the next: after turning on and booting BIOS, the laptop is going to reboot again and again and again.

View 8 Replies View Related

Partitioning Windows 7 Primary Volume?

Sep 14, 2012

my pc operating system is installed in c drive which is 25 gb in size, and d drive is 50 gb.is it possible to shrink 5 gb space of d drive and add it to c drive?

View 6 Replies View Related

Partitioning In Windows 7 Home Basic?

Mar 11, 2012

The problem which I faced is the same as the one given below: partitioning problem
I bought a new HP laptop which came with 4 partitions all of which are Primary partitions. The c: drive came with a massive 445GB. But I do not want to use the same partition for all my needs so i was thinking of creating another two partitions. So i shrunk c: from the Disk Management leaving 320GB Unallocated space for usage. But when I tried to create a partition from I got the "changing to Dynamic disk" warning. Basically it's similar to the problem faced by the other person in the link posted above.So I followed the post #8n by "Bare Foot Kid" and it went fine, the restarting and all till I tried creating a new volume. See the screenshots below:BTW, I have no idea how it happened but Q: suddenly popped out of nowhere after the "max partitions error".HDD Q HDD Q problem So now I'm clueless.

View 3 Replies View Related

Windows 7 Now Thinks It Isn't Genuine After Disc Partitioning

Nov 27, 2012

My husband recently partitioned my laptop disc drive so that he could install Linux in one partition. He has since changed is mind and will at some point give the entire disc back to Windows 7. Meanwhile, now I get that "Windows is not genuine" message frequently, where we didn't get it before.Also when I go to System, it shows me a product key but tells me that W7 isn't activated and that I should activate it now, and/or change the product key.I'm sure the W7 is genuine although we bought the laptop second hand from a neighbor and don't have the original install cd or dvd or whatever it was.Should I click on activate or change product key or what?Except for the annoying message coming up frequently, the computer works fine and I'm afraid of killing my system if I make the wrong move.

View 3 Replies View Related

Partitioning New Windows 7 HDD - Recovery And System Reserved?

Sep 18, 2010

I bought a new computer where Windows 7 is already pre-installed on partition C:. In addition I want now to install a second "test" Windows 7 system on new primary partition. And a logical "data" partition. At startup I want to choose later between the 2 Windows 7 systems which one I want to boot.

When I inspect now the current partition table (before changing it) it looks like:
1.) "Recovery" 10 GB Primary MBR NTFS
2.) "System Reserved" 100 MB Primary NTFS, Active, System
3.) "Local Volume" 30 GB Primary MBR NTFS Boot
4.) Unallocated

As you can I have a problem: If I create a new, 4 th primary, bootable partition with 30 GB into the "unallocated" space, then all maximum 4 primary partitions are filled. I cannot create a 5 th primary partition which contains the logical "data" partition. So I guess I must either destroy "Recovery" or "System Reserved" primary partition to have one more primary partition slot available.

Now what for are the "Recovery" and the "System reserved" partition? I don't know them from WinXP. Are they Windows 7 specific? Or are they "inventions" from the computer manufacturer (Sony)? Is "Recovery" absolutely necessary? Why is "System Reserved" active? From I WinXP I know only partitions as active which hold the OS and not some kind of "pre-boot-partitions"

View 2 Replies View Related

New Computer Partitioning For Windows 7 And Linux Future

Dec 5, 2011

I've just built my first Win 7 machine and with a 128Gb SSD for Win 7 (installed now) and a 2 TB drive for storage and apps (uninstalled now). I would like to know how to partition the 2TB drive for a Win7 app/data environment and leave another partition for future installation of Linux. What is the best way to do this and what product/routine?

View 1 Replies View Related

Hard Disk Partitioning In Windows 7 Home Basic

Oct 31, 2012

Befor two days i purchased a Sony E series core i5 Laptop with 500GB HDD Space & Original windows 7 Home basic. I wantd 4 partitions , but they said only two partions can be done in Sony laptops then they divided the HDD in to two drives. Nw C drive shows 254GB & D drive shows 195 GB space respectively. bt my system seems slow nw. Can i divide my C drive in to two drives with 125 GB space each without losing my OS & installed softwares??Before dividing do i need to take a backup of C drive?? how can i split ma existing C drive in to two drives ? How can i take backup?

View 4 Replies View Related

Partitioning A Windows 7 Acer Aspire Laptop To Have An XP Drive, Driver Compatibility?

Jan 23, 2013

I created a partition and installed XP on it and the game installs correctly (installation wouldn't even start on Win7) and it runs. However, the drivers I got when I bought the laptop are only compatible with Win7 (video drivers, wifi/lan drivers, the audio driver works fine on XP however).Because of this driver problem, I have no graphics driver to run the game (I know it works because I can start the game and hear the audio). I also couldn't connect to the internet to find and update drivers on that specific machine.

So I searched for them on another computer but after hours of searching, downloading and transferring the files to my Acer, failed to find any compatible with XP.The Acer website which I downloaded these drivers from mentions they work on XP in the description but they wouldn't install, giving the error 'not support on this operating system' or similar.FYI the hardware for the drivers I needed were: - Lite-on Wireless LAN 3rd WiFi BGN Atheros HB97 (OR Broadcom LAN BCM57780 for ethernet connection)- Intel VGA Chip UMAHas

View 3 Replies View Related

Partitioning In Win 7

Nov 18, 2009

I am new to windows 7. Recently i bought a laptop with windows pre-installed in it.

I have a HD drive of 500gb. Windows is already preinstalled on it. I Want to partition the drive without affecting any data. I loaded some 30 gb data already on the drive. I want to partition the 450gb drive into 3/4 drives each of 100gb, such that i can allocate the Os with a drive and remaining 2/3 with my personal data songs, movies...etc.

I want to partition the drive and I don't know how??? Can anyone please explain me step by step how to do it. The main point here is do i need to again reformat the whole drive such that before re-installing Windows 7 i can partition it (or) do i have any alternate solution such that while running windows I can partition the current drive without affecting any data other than system files.

View 9 Replies View Related

Partitioning

Dec 16, 2008

I have a 2 partition disk split: C:Windows 7 & E:data . I want to sneak in a partition at the start of E: to hold XP os and thus "F:" becomes my new data partition. Shrink as far as I know will create a space after the currently existing E:. The added problem is I am only playing with a small drive and cannot just copy over the data.

View 6 Replies View Related

Use Some HDD Partitioning?

Jan 26, 2012

One day I booted up my comp & My HDD was Partitioned into 2 Parts. My C: Drive Also my Boot Drive has Windows 7 on it while The other Half of my HDD My F: Drive has all my files on itI was wondering how I could Merge these to Together without hurting or losing anything on my comp?

View 9 Replies View Related

Partitioning Question

Sep 28, 2009

I currently have a dual boot system of XP and 7. Xp was the first installed os. After partitioning Windows 7 was added and made the default os.

I now want to get rid of XP and reallocate the space to Win 7. I have assumed that I can do this from within Win 7 using Disk Management. From win 7 the partition for win 7 appears as C: and for Xp its D: And likewise from XP the partition for XP is C: and 7 is D: (if you follow what I mean).

Now when I try to delete the XP partition from Disk Management it does not give me the option to do so (the option is greyed out). Is there a way around this? If not I may as well just wait until I get the retail copy of 7. I am going to presume that the mbr is most likely to be on the XP C: drive? as that was the os installed initially.

View 2 Replies View Related

Initial Partitioning

Dec 26, 2009

After all the trouble that I went to remove the old partitions on the HD in my secondary rig, I forgot to disconnect a second HD installed, and after going through a number of other repairs just before starting the installation, I wasn't thinking clearly and deleted the partitions that I had made with the HD installed on my primary rig.

Attempting to recreat the partitions with the installation procedure got things even more messed up because I didn't find any facility for actuallyt creating a partition of the size that I wanted, only a format function, which I assumed would format the entire drive, or as I did, click Next, hoping to find something more in the next screen, but it then just started the installation itself, and took the entire drive, except a 100MB partition that it also created for the system reserved functions.

Not being in the mood to once again remove the harddrive back to my primary rig for prep, I let it continue the installation, because it would not permit me to delete the partitions that it had made. I'm hoping that I can resize the main partition after the install completes, but if like when I installed the x32 bit version in this manner, it scattered files across the partition in a fashion that would make it difficult to do so.

On my primary rig, I have the entire OS installed on one neat 100GB partition, and that is what I want here also. I'm trying to decide whether to nuke the HD again, or finish the installation and attempt to customize it afterward. Which would be better?

View 2 Replies View Related

Partitioning Trouble

May 1, 2009

I want to delete my HP C: partition which has Vista installed on it, i have Windows 7 build 7100 installed on the Windows 7 A: partition.

I want to delete the C: partition and extend A: over it.

The system will not allow me to delete the C: partition, how do i do it?

View 5 Replies View Related

Backups And Partitioning

Jan 5, 2010

i just got a new 320gb hard drive for my thinkpad and installed it with no problems, and then did a clean install of windows 7. everything is working fine, but i'm wondering about setting up partitions and backups.

i back up my files to an external hard drive every couple weeks or so. i don't have anything set up on my laptop, though.

should i set up a partition on my laptop to create a backup?

how big should the partition be?

can i set it up even though i've already installed and formatted the drive?

any suggestions for an app to do backups with?

View 9 Replies View Related

Partitioning The Primary Drive

Oct 19, 2011

My disk crashed and had to reload everything, I took it to Toshiba service center. Before the crush my hard disk was just one big physical disk now I have: C: physical 150.84 GB(boot, page file, crush dump, primary partition)If so can you please tell me how to do it, never done this before, partitioning, and I don't want to make a mess out of it.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved