I purchased a Toshiba NB-205 netbook a while back (why did I do that again?) and now I'm trying to prepare it for selling on ebay.Now, I did have it sent to me originally with Windows 7 Starter (again, why starter? xD) instead of XP which will boost its value in my opinion, but I have some problems:
1) My netbook did get some virus which I can't remember what it's called but it basically tries to imitate Norton anti-virus into making me purchase some crapware that doesn't even exist or something like that. Anyway, I couldn't really remove it, and it's one of the reasons I ultimately decided I want to just reformat and sell. Also just to get some extra cash
2) I was wondering how I could eliminate the virus by reformatting perhaps? But I still would like to keep Windows 7 on it if possible... If not possible, it would be better to advertise no software than Virus-ridden so I guess if I can't keep 7, I'll just reformat.
i trying to install windows 7 Ultimate 32Bit on Adaptec aha-2940 UUW SCSI Bios Windows installation to the stage (installing updates) will continue But when the stage (complete Windows installation) is the following message appears: ''windows could not prepare the computer to boot into the next phase of installation.to install windows restart the installation"
Like 3 weeks ago the smarthdd malware affected my computer. The one where all your icons, files, etc. are hidden, gives you bogus security alerts, and then turns off the PC. Using support from the web with Rkill, MalwareBytes, and Hitman Pro. I eliminated the problem. While I thought I had recovered the computer I was wrong. Probably a day later I notice regedit would start when the computer was started and a few seconds later the computer would turn off. After turning on the computer a few times, the problem was gone. MSE is turned off. I tried to turn it on but it wouldn't turn on, saying the system needed to restart.
I also notices the computer would notify that Windows Update was also turned off and can't turn it on or download any updates (error: windows update cannot currently check for update, because the service is not running. You may need to restart the computer). Also, when I click the Nvidia settings icon, the computer does not detect video graphics hardware. I checked around a forum and I saw someone having the same problem and was advised to set BITS service and Windows Update service to start automatic. But when I check the services.msc, those services are gone. Also, I noticed that in the Device Manager, in System Devices, 2nd Generation Intel Core processor family PCI Express controller - 0101 has a yellow triangle sign on it.
On properties, it has this status: "Windows cannot initialize the device driver for this hardware. (Code 37)". So I try uninstalling MSE and installing it again, but the problem persist there. I run several scans with different anti-virus/malare and while I do find a few malwares, fixing/deleting/quarantined them haven't solved the problem. Yet, one antivirus (eset nod) wouldn't install, after many tries when it got to a driver install stage. I also try windows fix it, but nothing was solved. Also tried kapersky TDSSkiller, and nothing was solved (though when initializing, it gives an error saying that 'Can't load driver", yet it continues initializing).
So then I tried chkdsk /r in the command prompt, but it throws off an error in the second stage, restarting the scan again continuously until I decide to skip the scan. Finally I decided I had enough and tried a repair install, but after the stage where it check the programs and settings, I get the error "windows could not prepare the computer to boot into the next phase of installation". Then out of resignation I tried doing a clean install, but it gives me the same error. Later ran sfc /scannow on command prompt, and the log said that it couldn't repair DDORes.dll. So then what I did was replace DDORes.dll with one from installation disk.
Nothing was solved, and sfc scan still gives me that DDORes.dll is corrupted and can't be repaired. Later I tried upgrading the Intel graphics driver and the Intel Display Audio Driver. After rebooting the resolution of the laptop changed from 1366 X 768 to 800 X 600 as default, and now i can't increase it over 1024 X 768. Device manager shows that now both the Intel HD Graphics 3000 and Intel Display Audio cannot start due to error: "Windows cannot initialize the device driver for this hardware. (Code 37)" Or any way to at least clean install the OS so I can get rid of this problems?
I've got a 320GB drive on a Vista Premium Home notebook.
Few user files are actually on the notebook, rather the files are on my desktop, and are processed via the network, or temporarily copied to the notebook.
Currently, C drive is 285.04GB with 246GB free.
HP's recovery partition is 13.05GB, with 2.4GB free.
I am going to shrink the C drive, so I can add a separate partition for my own files, this partition could be shared with Windows 7.
How much space should I leave for Windows 7 Home?
I would end up with the following partitions:
C: For Vista
H: For Howard's files
W: For Windows 7 Home
Unallocated: Likely 32GB, in case I wish to add Ubuntu Linux.
D: Recovery partition for HP. I use image backup so this is not really useful.
In a few days I will be upgrading from my AMD 965 Black and Gigabyte GA-870A-UD3 to an Intel i5 2500k and GIGABYTE GA-Z68XP-UD4. I was curious as to what you all thought I could do to minimize effort and problems restoring my system settings, programs, and data files after a clean install of Windows 7.I currently have 3 HDDs; A 640GB for my OS (C: ), a 1TB for Programs and User files (D: ) (Pics, Docs, DVDs, etc.), and a 500GB (E: ) for Win7 backups. I also have a NAS (\NAS) with 500GB. At this point I have good User File backups on E: and am now creating IFW drive images of C: and D: onto the NAS. I have also generated reports from SIW (Hardware, Software, and Network) and Win7's System Settings from the Advanced Tools control panel.
I am trying to install Windows 7 after getting attacked by some virus. So formatted the system C Drive. Now there is no OS. When i tried booting it from a bootable Windows 7 DVD, it gets installed almost, expanding files -- 100% but at the end i receive this wierd error."Windows could not prepare the computer to boot into the next phase of installation.To install Windows, restart the installation."
I've got a Gigabyte GA-EP45-UD3P mobo, and am trying to do a clean install of the Windows 7 trial edition. I was getting access errors, so after moving my memory around, and trying different sticks, I've come to a configuration which is getting me through that problem, but I've reached another problem.After the fourth step(I believe they are "Copying files, expanding files, installing features, installing updates"), the computer hangs for a minute or so then gives me the error message "Windows could not prepare the computer to boot into the next stage of the installation. To install Windows, restart the installation."I've retried this three times to no avail, and googled the problem, but the majority of the answers I am finding for this are for people upgrading from Windows Vista
About three months ago I built a new PC but with trying to keep in budget I opted to use my dads windows 7 CD and bought a code online. Recentley though it failed and after googling I found that this was probably a trial version. I have now bought a retail copy and thought I would get an SSD as I did want to get one origanlly but again couldnt get it into my budget.Basically I have alot of stuff I dont want to keep on there ( I will transfer all of my music, steam games etc onto an external hdd) so would like to do a fresh install of windows onto the SSD and completley wipe the HDD so it can just be used for storage.
I had encountered problems with my laptop and wanted to start a fresh so I tried to install windows seven again and got all the way through the installation up until the completing installation phase then after about fourty minutesi received an error of what I beleive said windows has encountered a problem restart the computer and restart the installation and when i tried to boot I got an error after the setup is starting services screen that says the computer restarted unexpectedly or encountered an unexpected error windows installation cannot proceed, and when I restart I get stuck in this loop, I have my bios set to boot from cd drive but if I do not press any buttons it shows four different windows 7 listed, I am completely stuck in what to do, i have a dell Inspiron N5030.
I want to wipe my hard drive becuase over a couple of years it has become a lot slower and i want to try wiping it before i start upgrading it. How can i compeletely wipe a disk but and then re-install windows on it without having to buy a new one. i don't have the original windows disk on it. Do i use the recovery disk, or do i only wipe the non-os partition.
I have a Dell XPS 13 that came with Vista home. I later upgraded to Windows 7 home. The computer began to have intermittent lock up and video failures so I decided to wipe the drive and do a clean install of Windows 7. Now I can't activate windows 7. Since I upgraded this legitimently I should be able to reactivate my system.
I'm considering installing FreeNAS on my laptop, but I was wondering, would it be possible to reinstall Win 7 if I didn't like FreeNAS, or would I have to buy an OEM disc?
I have a new laptop on its way and my friend suggested for me to to a clean wipe/format and then reinstall Windows 7 so that all the useless softwares that comes with the laptop can be deleted and I can have a fresh start with the laptop. So my questions are considering my situation, which would be better, to wipe or format? And what are the procedures for the doing so, and also reinstalling Windows 7?
I have a old laptop that I installed w7 on. I was getting slow, so I wanted to get it so empty as possible. I have backed up all my files. Now I want everything to go, and start with a virgin windows 7.
When I installed win 7 it saved all my files to windows old (as it should) and all programs are left int c:/programfiles/.
How can I get rid of everything? I tried clean in the diskpart command. But it says it cannot(because of having system files on it).
I have a co-worker that brought in his Acer notebook. It is running Windows 7 loads but only will show the background. Nothing else will show. When trying to do a repair it locks up the repair every time. Does the same thing if I try to install Windows again.
I've heard that diskpart / clean all is very thorough, but I don't know how to do this on my netbook since the main drive of the computer in use can't be the one selected for clean all. Is there another way to do this, or an alternative that would be just as thorough? I have Windows 7 starter (32 bit).
wipe my hard drive clean of everything (including my current installation of windows 7)I currently have a dell inspiron 1545 running windows 7. I bought it new and I think with Windows pre-installed. That hard drive crashed, so I got a replacement one and that one did not come with any CDs or DVDs.First question:I've read that nowadays that most manufacturers don't ship disc's, but rather deposit recovery partition on the hard drive.If I create a DVD with this recovery partition will it be exactly the same as if I buy a new windows installation disc?
My laptop completely crashed. I took it to my cousin and he completely wiped it clean and put a dell recovery disk into it (its an acer aspire 3000). Well he couldn't find the license key to 'activate' windows. Then the laptop screen broke and started working the other day. Anyways, I want to put windows 7 maybe on a dvd-r. I read somewhere that you have to get a license key hence expire like what happened before. I do have a dvd burner in this computer. So:
1. Where do I download windows 7 iso. 2. How do I put it on a dvd-r. 3. How do I completely wipe the laptop clean without logging into it because as I said windows expired and I cant use it. 4. How long will it take. 5. How can I make sure it wont expire and everything will work fine on it.
I am trying to help a friend out with his Sony Vaio E Series Laptop. The computer had crashed and he tried to do a clean install of windows but it failed and nothing would respond. Even when you tired to do a clean install of windows again it just went to the light blue windows screen with the bird and nothing happened. So I used Dban to Wipe the hard drive clean and start over from scratch. After I wiped it I tried to reinstall windows and it says there are no signed device drivers found. So I checked the bios and it's not even registering the hard drive. I have been searching the boards everywhere to find a solution to this. The Bios does not allow for much change so I can not make sure it is set to a SATA connection and I have tried turning off the signed device option when starting up. Nothing is working.
Would like to know what the proper way to go about formating hard drive and reinstalling windows 7 all I have is the repair disk, data back up disk & the Image disk i got the dell laptop from bestbuy and geeksquad did the set up well actually 3 weeks ago my motherboard and processor took a crap and it was replaced but i dont have a windows disk and actually had to get a program to track down the cd key but i dont have any dell software installed in here and its missing to many system files to run down. so i fifgured i would just "start over".
I recently purchased a Dell Xps 1340 laptop that came with windows 7 32 bit professional. After a few months, I needed to wipe the hard disk, and so I did. Before I did, I extracted my product key with a program that I downloaded off the internet. I got the following information:
Windows 7 Professional Product Part No.: X15-37377 Installed from 'OEM' media. Product ID: ******* match to CD Key data CD Key: ********* Computer Name: ***-PC Registered Owner: *** Registered Organization:
Anyway, I had a RETAIL windows 7 professional disc, and I installed this onto my dell laptop. However, it keeps telling me that my product key is wrong when I try to activate. I have tried both 32bit and 64bit? is it because I'm using a RETAIL windows 7 disc? If I try a dell oem disc, will that work with my product key?
Lately i got myself a new computer. I use the wrong OS to install and installed Window XP and Got a BlueScreen mid way. Later i realize there was a Disc containing Windows 7. when i Put the CD in it does nothing. My Pc load all the way up to a black screen with a blinking underscore and stay there. I cant type and can only restart the PC.
If I were to reformat my computer will the protected partition be wipe clean too even thought I wasnt ask to do or delete any partition during or after factory restore
