Basically i brought an OEM version of windows the other day ,Installed fine and all was going well till my hard drive started playing up. So iv invested in a new hard drive but....how do i go about uninstalling this copy and putting it on the new drive, Because i was told it could only be installed on one pc ?
how do I uninstall a program from my hard drive. I know deleting it will not remove it entirely from my system. Its a Microsoft program with an icon on my desktop that I don't want.
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
So I have a 64MB SSD that I use as my boot drive, then I have 1TB in SATA. I have Windows loaded on my SSD and everything works great. What I want to know, how do I move the primary drive to the SATA? Right now, SSD is "C" and SATA is "E".
This is quite a problem, I have a very small HDD that i was forced to use instead of my 700GB external HDD. How can I change this? Changing the path would not work due to it being the path of the small drive being "C"
Windows 7 Home Premium Under Windows Explorer 'Computer' all of the my drives and storage devices are listed. I am trying to change the icon associated with my esata external hard drive.
I have built a computer for video editing and named the hard drives (C for the main drive, (M for the drive holding my music, (P for the drive for photos, and I named the drive to store my videos (V. However when I tried to write path to the V: drive I was told V: is an invalid path, I suppose because of the confusion with a followed by a / which would give you a / which can be confused with V but is not exactly the same. I went to My Computer and right clicked on the V: drive and clicked on "rename" in the drop down menu and changed the name to "Storage" but the (V persisted. Then I renamed again and named the drive "Storage (S" and now in "My Computer" the drive is shown as "Storage (S (V" When writing a path to put videos on this drive can I use either S:/ or V:/ to get videos into this drive? Is there some way to remove the (V
I just re-replaced my Segate ST31000340AS with a new Segate ST32000641AS (64m / 600mb) double the old drive. Did a clean install the 5.9 number did not change. Anyone knows why?
I have a toshiba satellite laptop and had to replace the hard drive. I am trying to reload Windows 7 from a USB. I went into the settings and changed it to boot from USB but the computer is not recognizing it. It gives me a black screen that says "Check cable connection! PXE-MOF: Exiting Intel PXE ROM. No bootable device--insert boot disk and press any key" I also have tried using a Windows 7 upgrade cd that says it contains the full version but got the same message.
I have two 1TB drives, each containing 4 partitions, used for backing up 4 computers. These drives are regularly switched between buildings as part of our backup strategy, always having one off-site. I have assigned drive letters M,N,O,P to respective partitions. When I swap the drives, the drive letters get reset and have to be manually reassigned. assigning the drive letters, including USBDM, but get no results.
Computers: HP Compaq 8200 Elite - CMT - 1 x Core i5 2500 / 3.3 GHz - RAM 4 GB - SSD 1 x 160 GB - DVD�RW (�R DL) / DVD-RAM - HD Graphics 2000 - Gigabit Ethernet - Windows 7 Professional 64-bit - Intel vPro Technology Docking Stations: ICY DOCK MB877SK Hard Drives: SAMSUNG Spinpoint F3 HD103SJ 1TB
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
I lost my Event Viewer, and had to do a repair installation to fix it. Unfortunately, during the repair install, Windows decided to rename my second HD as the D: drive... it was K: before that. Now I cannot access any of my docs, pictures, music, or videos through the normal means... they don't show up in libraries or explorer, and apps like Restorator and Sure Thing (CD labeler) cannot find them. I think that means the paths are broken..?
It won't allow me to rename the HD back into K: (it's not listed as available). I can access the data by clicking Computer > D, and I can see the data is there, but its unusable as of now. Any ideas?
Something on my hard drive is eating up the space even though I un-install applications and then it shows lots of space, but in a few moments that space is gone.
I have run Malwarebytes and deleted a lot of my files that is suspected of Virus/Spyware, yet the same thing happens repeatedly.
What software can I use to ensure I get rid of this 'thing' that is eating away or growing on my hard disk?
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
i had window 7 RC at drive C, msdn window 7 at drive D, everytime i booted, i have three option, two 7,one early os. is anyone can tell me how to uninstall RC? i tried to format drive C,but it did not sucessful.
I have 3 ssd's. 60gb 120gb and 256. Currently the60 is not installed and may still have data on it from a previous pc build. Windows is installed on the 120 right now with the 256 being a second drive for my steam games. I want to erase all data on all of the drives and install windows onto the 60gb (new c drive) and make the 120 and 256 an e and f drive. Here are some of my questions.Should i hookup the 60gb drive so my pc recognizes it and then go about reformatting and erasing all data from the 3 drives? Except the os.Then after erasing all data do i delete the partition from the 120gb drive and reinstall to the 60gb drive?Does installing windows to a drive automatically default it to the c drive?
I just installed accidentally windows 7 ultimate using the D back up drive. I am now getting message that my D drive is almost full and need to delete files. How can I uninstall the windows 7 in that drive as I already installed windows 7 to the correct C hard drive.
I installed MagicDisk awhile back because I was trying to mount a copy of memtest. Anyways, I ended up uninstalling MagicDisk, but the virtual cd-rom drive it created stayed behind.
So, I went to device manager and uninstalled it, and thought I had solved the problem.
However, every time my computer either boots or even wakes up from sleep mode, windows automatically reinstalls the drivers and re-enables the virtual cd-rom drive.
Does anyone know where to find the registry files I have to delete to tell my windows installation that I don't want that drive anymore?
In my HP G61 notebook by mistake in c: properties- security-advance setting delete all access of c:, now I can't access the c: by window, can't install and uninstall any software in my pc and not able to delete any file on pc. Now after purchase I didn't make recovery disc. Today I try to make recovery disc. Using start-recovery manager-create recovery, not open window show error (windows cannot access c:program file x86hewlett-packardrecoverycd creator.exe). How to make access on c drive.
I installed MagicDisk awhile back because I was trying to mount a copy of memtest. Anyways, I ended up uninstalling MagicDisk, but the virtual cd-rom drive it created stayed behind.However, every time my computer either boots or even wakes up from sleep mode, windows automatically reinstalls the drivers and re-enables the virtual cd-rom drive. where to find the registry files I have to delete to tell my windows installation that I don't want that drive anymore?
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?